Package: src:poke-elf Version: 1.0-1 Severity: important Tags: forky sid ftbfs User: [email protected] Usertags: ftbfs-nocheck-profile
Dear maintainer: During a rebuild of all packages in unstable using the nocheck build profile, your package failed to build. Below you will find how the build ends (probably the most relevant part, but not necessarily). If required, the full build log is available here: https://people.debian.org/~sanvila/build-logs/202509/ A wiki page discussing how to reproduce bugs in this category and possible solutions is available here: https://wiki.debian.org/qa.debian.org/FTBFS/Nocheck (It's a wiki, so you are welcome to contribute) [ Note: This is RC, but I will wait at least two weeks before raising the severities, there are a lot of gcc-15 and CMake 4 bugs open now ]. About the archive rebuild: The build was made on virtual machines from AWS, using sbuild and a reduced chroot with only build-essential packages. If you could not reproduce the bug please contact me privately, as I am willing to provide ssh access to a virtual machine where the bug is fully reproducible. If this is really a bug in one of the build-depends, please use reassign and add an affects on src:poke-elf, so that this is still visible in the BTS web page for this package. Thanks. -------------------------------------------------------------------------------- [...] debian/rules clean dh clean dh_clean debian/rules binary dh binary dh_update_autotools_config dh_autoreconf dh_auto_configure ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking checking for a BSD-compatible install... /usr/bin/install -c checking whether sleep supports fractional seconds... yes checking filesystem timestamp resolution... 0.01 checking whether build environment is sane... yes checking for a race-free mkdir -p... /usr/bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make supports nested variables... yes checking xargs -n works... yes ./configure: line 2633: syntax error near unexpected token `POKE,4.0' ./configure: line 2633: `PK_PROG_POKE(POKE,4.0)' tail -v -n \+0 config.log ==> config.log <== This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by poke-elf configure 1.0, which was generated by GNU Autoconf 2.72. Invocation command line was $ ./configure --build=x86_64-linux-gnu --prefix=/usr '--includedir=${prefix}/include' '--mandir=${prefix}/share/man' '--infodir=${prefix}/share/info' --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules '--libdir=${prefix}/lib/x86_64-linux-gnu' --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking ## --------- ## ## Platform. ## ## --------- ## hostname = c7a-large-1759231409 uname -m = x86_64 uname -r = 6.12.48+deb13-cloud-amd64 uname -s = Linux uname -v = #1 SMP PREEMPT_DYNAMIC Debian 6.12.48-1 (2025-09-20) /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /usr/local/sbin/ PATH: /usr/local/bin/ PATH: /usr/sbin/ PATH: /usr/bin/ PATH: /sbin/ PATH: /bin/ PATH: /usr/games/ ## ----------- ## ## Core tests. ## ## ----------- ## configure:1707: looking for aux files: tap-driver.sh missing install-sh configure:1720: trying ./build-aux/ configure:1749: ./build-aux/tap-driver.sh found configure:1749: ./build-aux/missing found configure:1731: ./build-aux/install-sh found configure:1881: checking for a BSD-compatible install configure:1955: result: /usr/bin/install -c configure:1966: checking whether sleep supports fractional seconds configure:1982: result: yes configure:1985: checking filesystem timestamp resolution configure:2120: result: 0.01 configure:2125: checking whether build environment is sane configure:2166: result: yes configure:2337: checking for a race-free mkdir -p configure:2380: result: /usr/bin/mkdir -p configure:2387: checking for gawk configure:2423: result: no configure:2387: checking for mawk configure:2408: found /usr/bin/mawk configure:2420: result: mawk configure:2431: checking whether make sets $(MAKE) configure:2455: result: yes configure:2481: checking whether make supports nested variables configure:2500: result: yes configure:2514: checking xargs -n works configure:2530: result: yes ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=x86_64-linux-gnu ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= ac_cv_path_install='/usr/bin/install -c' ac_cv_path_mkdir=/usr/bin/mkdir ac_cv_prog_AWK=mawk ac_cv_prog_make_make_set=yes am_cv_filesystem_timestamp_resolution=0.01 am_cv_make_support_nested_variables=yes am_cv_sleep_fractional_seconds=yes am_cv_xargs_n_works=yes ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} '\''/<<PKGBUILDDIR>>/build-aux/missing'\'' aclocal-1.17' AMTAR='$${TAR-tar}' AM_BACKSLASH='\' AM_DEFAULT_V='' AM_DEFAULT_VERBOSITY='1' AM_V='' AUTOCONF='${SHELL} '\''/<<PKGBUILDDIR>>/build-aux/missing'\'' autoconf' AUTOHEADER='${SHELL} '\''/<<PKGBUILDDIR>>/build-aux/missing'\'' autoheader' AUTOMAKE='${SHELL} '\''/<<PKGBUILDDIR>>/build-aux/missing'\'' automake-1.17' AWK='mawk' CSCOPE='cscope' CTAGS='ctags' CYGPATH_W='echo' DEFS='' ECHO_C='' ECHO_N='-n' ECHO_T='' ETAGS='etags' INSTALL_DATA='${INSTALL} -m 644' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' LIBOBJS='' LIBS='' LTLIBOBJS='' MAKEINFO='${SHELL} '\''/<<PKGBUILDDIR>>/build-aux/missing'\'' makeinfo' MKDIR_P='/usr/bin/mkdir -p' PACKAGE='poke-elf' PACKAGE_BUGREPORT='[email protected]' PACKAGE_NAME='poke-elf' PACKAGE_STRING='poke-elf 1.0' PACKAGE_TARNAME='poke-elf' PACKAGE_URL='https://www.jemarch.net/poke-elf' PACKAGE_VERSION='1.0' PATH_SEPARATOR=':' RUN_TESTS_FALSE='' RUN_TESTS_TRUE='' SET_MAKE='' SHELL='/bin/bash' STRIP='' VERSION='1.0' am__isrc='' am__leading_dot='.' am__rm_f_notfound='' am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' am__xargs_n='xargs -n' bindir='${exec_prefix}/bin' build_alias='x86_64-linux-gnu' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host_alias='' htmldir='${docdir}' includedir='${prefix}/include' infodir='${prefix}/share/info' install_sh='${SHELL} /<<PKGBUILDDIR>>/build-aux/install-sh' libdir='${prefix}/lib/x86_64-linux-gnu' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='/var' mandir='${prefix}/share/man' mkdir_p='$(MKDIR_P)' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/usr' program_transform_name='s,x,x,' psdir='${docdir}' runstatedir='/run' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "poke-elf" #define PACKAGE_TARNAME "poke-elf" #define PACKAGE_VERSION "1.0" #define PACKAGE_STRING "poke-elf 1.0" #define PACKAGE_BUGREPORT "[email protected]" #define PACKAGE_URL "https://www.jemarch.net/poke-elf"; #define PACKAGE "poke-elf" #define VERSION "1.0" configure: exit 2 dh_auto_configure: error: ./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --disable-option-checking --disable-silent-rules --libdir=\${prefix}/lib/x86_64-linux-gnu --runstatedir=/run --disable-maintainer-mode --disable-dependency-tracking returned exit code 2 make: *** [debian/rules:6: binary] Error 25 dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2 --------------------------------------------------------------------------------
