Hi, On Thu, Mar 20, 2025 at 11:53:16PM +0100, zb-pub...@mnet-online.de wrote: > Dear Salvatore, > > trying my best to provide appropriate pieces of information (I'm an > electronics person, not a software developer). > > I tried kernel versions available via apt in debian 12. > > Up to -26, I was able to boot. With -28 and higher, the boot process > failed. > > linux-image-6.1.0-18-amd64 OK > linux-image-6.1.0-20-amd64 OK > linux-image-6.1.0-21-amd64 OK > linux-image-6.1.0-23-amd64 OK > linux-image-6.1.0-26-amd64 OK > linux-image-6.1.0-28-amd64 FAIL > linux-image-6.1.0-29-amd64 FAIL > linux-image-6.1.0-30-amd64 FAIL > linux-image-6.1.0-31-amd64 FAIL > linux-image-6.1.0-32-amd64 FAIL > > Other than choosing the kernel versions (as listed above) using grub, > nothing was changed; all was done on the same machine using the same > installation. > > I'll now try to provide logs from booting with -26 and -28. > (linux-image-6.1.0-27... was not in aptitude's list of available > versions of this package.)
Yes -27 ABI is not directly anymore in the archive, but you can fetch it from the snapshots service: https://snapshot.debian.org/binary/linux-image-6.1.0-27-amd64/ Can you check this as well so that we can narrow down even more the versions of OK and FAIL's? > The dmesg output of the last successful boot using -26 is: > > [ 0.000000] microcode: microcode updated early to revision 0x26, date > = 2019-11-12 > [ 0.000000] Linux version 6.1.0-26-amd64 > (debian-ker...@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU > ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian > 6.1.112-1 (2024-09-30) > [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.1.0-26-amd64 > root=UUID=e2b594fa-eadc-4e1e-8b49-40381efc4390 ro quiet > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] > usable > [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009551ffff] > usable > [ 0.000000] BIOS-e820: [mem 0x0000000095520000-0x0000000095e1ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000095e20000-0x000000009cabefff] > usable > [ 0.000000] BIOS-e820: [mem 0x000000009cabf000-0x000000009cebefff] > reserved > [ 0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] > ACPI NVS > [ 0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] > ACPI data > [ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] > usable > [ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] > reserved > [ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] > reserved > [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] > usable > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] SMBIOS 2.8 present. > [ 0.000000] DMI: Acer Aspire E5-771G/EA70_HB, BIOS V1.09 07/17/2014 > [ 0.000000] tsc: Fast TSC calibration using PIT > [ 0.000000] tsc: Detected 2400.040 MHz processor > [ 0.001257] e820: update [mem 0x00000000-0x00000fff] usable ==> > reserved > [ 0.001262] e820: remove [mem 0x000a0000-0x000fffff] usable > [ 0.001275] last_pfn = 0x25f600 max_arch_pfn = 0x400000000 > [ 0.001422] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- > WT > [ 0.002104] e820: update [mem 0x9d000000-0xffffffff] usable ==> > reserved > [ 0.002113] last_pfn = 0x9d000 max_arch_pfn = 0x400000000 > [ 0.016694] Using GB pages for direct mapping > [ 0.017877] RAMDISK: [mem 0x308cd000-0x3445dfff] > [ 0.017884] ACPI: Early table checksum verification disabled > [ 0.017887] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS) > [ 0.017894] ACPI: XSDT 0x000000009CFFE210 0000B4 (v01 ACRSYS ACRPRDCT > 00000001 01000013) > [ 0.017902] ACPI: FACP 0x000000009CFF8000 00010C (v05 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017910] ACPI: DSDT 0x000000009CFE4000 010776 (v02 ACRSYS ACRPRDCT > 00000000 1025 00040000) > [ 0.017915] ACPI: FACS 0x000000009CFBA000 000040 > [ 0.017919] ACPI: UEFI 0x000000009CFFD000 000236 (v01 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017924] ACPI: FPDT 0x000000009CFFB000 000044 (v01 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017929] ACPI: MSDM 0x000000009CFFA000 000055 (v03 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017933] ACPI: ASF! 0x000000009CFF9000 0000A5 (v32 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017938] ACPI: HPET 0x000000009CFF7000 000038 (v01 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017943] ACPI: APIC 0x000000009CFF6000 00008C (v03 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017948] ACPI: MCFG 0x000000009CFF5000 00003C (v01 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017952] ACPI: WDAT 0x000000009CFE3000 000224 (v01 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017957] ACPI: BOOT 0x000000009CFE1000 000028 (v01 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017961] ACPI: LPIT 0x000000009CFE0000 000094 (v01 ACRSYS ACRPRDCT > 00000000 1025 00040000) > [ 0.017966] ACPI: ASPT 0x000000009CFDE000 000034 (v07 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017971] ACPI: DBGP 0x000000009CFDD000 000034 (v01 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017975] ACPI: SSDT 0x000000009CFDC000 000539 (v01 ACRSYS ACRPRDCT > 00003000 1025 00040000) > [ 0.017980] ACPI: SSDT 0x000000009CFDB000 000AD8 (v01 ACRSYS ACRPRDCT > 00003000 1025 00040000) > [ 0.017985] ACPI: SSDT 0x000000009CFD8000 002F39 (v01 ACRSYS ACRPRDCT > 00003000 1025 00040000) > [ 0.017989] ACPI: SSDT 0x000000009CFD3000 002E1A (v01 ACRSYS ACRPRDCT > 00001000 1025 00040000) > [ 0.017994] ACPI: CSRT 0x000000009CFD6000 0000C4 (v01 ACRSYS ACRPRDCT > 00000001 1025 00040000) > [ 0.017998] ACPI: Reserving FACP table memory at [mem > 0x9cff8000-0x9cff810b] > [ 0.018000] ACPI: Reserving DSDT table memory at [mem > 0x9cfe4000-0x9cff4775] > [ 0.018002] ACPI: Reserving FACS table memory at [mem > 0x9cfba000-0x9cfba03f] > [ 0.018003] ACPI: Reserving UEFI table memory at [mem > 0x9cffd000-0x9cffd235] > [ 0.018005] ACPI: Reserving FPDT table memory at [mem > 0x9cffb000-0x9cffb043] > [ 0.018006] ACPI: Reserving MSDM table memory at [mem > 0x9cffa000-0x9cffa054] > [ 0.018007] ACPI: Reserving ASF! table memory at [mem > 0x9cff9000-0x9cff90a4] > [ 0.018008] ACPI: Reserving HPET table memory at [mem > 0x9cff7000-0x9cff7037] > [ 0.018010] ACPI: Reserving APIC table memory at [mem > 0x9cff6000-0x9cff608b] > [ 0.018011] ACPI: Reserving MCFG table memory at [mem > 0x9cff5000-0x9cff503b] > [ 0.018012] ACPI: Reserving WDAT table memory at [mem > 0x9cfe3000-0x9cfe3223] > [ 0.018014] ACPI: Reserving BOOT table memory at [mem > 0x9cfe1000-0x9cfe1027] > [ 0.018015] ACPI: Reserving LPIT table memory at [mem > 0x9cfe0000-0x9cfe0093] > [ 0.018016] ACPI: Reserving ASPT table memory at [mem > 0x9cfde000-0x9cfde033] > [ 0.018018] ACPI: Reserving DBGP table memory at [mem > 0x9cfdd000-0x9cfdd033] > [ 0.018019] ACPI: Reserving SSDT table memory at [mem > 0x9cfdc000-0x9cfdc538] > [ 0.018020] ACPI: Reserving SSDT table memory at [mem > 0x9cfdb000-0x9cfdbad7] > [ 0.018022] ACPI: Reserving SSDT table memory at [mem > 0x9cfd8000-0x9cfdaf38] > [ 0.018023] ACPI: Reserving SSDT table memory at [mem > 0x9cfd3000-0x9cfd5e19] > [ 0.018024] ACPI: Reserving CSRT table memory at [mem > 0x9cfd6000-0x9cfd60c3] > [ 0.018095] No NUMA configuration found > [ 0.018096] Faking a node at [mem > 0x0000000000000000-0x000000025f5fffff] > [ 0.018113] NODE_DATA(0) allocated [mem 0x25f5d3000-0x25f5fdfff] > [ 0.018575] Zone ranges: > [ 0.018576] DMA [mem 0x0000000000001000-0x0000000000ffffff] > [ 0.018580] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] > [ 0.018582] Normal [mem 0x0000000100000000-0x000000025f5fffff] > [ 0.018585] Device empty > [ 0.018586] Movable zone start for each node > [ 0.018591] Early memory node ranges > [ 0.018592] node 0: [mem 0x0000000000001000-0x000000000009cfff] > [ 0.018594] node 0: [mem 0x0000000000100000-0x000000009551ffff] > [ 0.018596] node 0: [mem 0x0000000095e20000-0x000000009cabefff] > [ 0.018598] node 0: [mem 0x000000009cfff000-0x000000009cffffff] > [ 0.018599] node 0: [mem 0x0000000100000000-0x000000025f5fffff] > [ 0.018603] Initmem setup node 0 [mem > 0x0000000000001000-0x000000025f5fffff] > [ 0.018611] On node 0, zone DMA: 1 pages in unavailable ranges > [ 0.018670] On node 0, zone DMA: 99 pages in unavailable ranges > [ 0.027477] On node 0, zone DMA32: 2304 pages in unavailable ranges > [ 0.027505] On node 0, zone DMA32: 1344 pages in unavailable ranges > [ 0.028206] On node 0, zone Normal: 12288 pages in unavailable ranges > [ 0.028259] On node 0, zone Normal: 2560 pages in unavailable ranges > [ 0.028268] Reserving Intel graphics memory at [mem > 0x9da00000-0x9f9fffff] > [ 0.028355] ACPI: PM-Timer IO Port: 0x1808 > [ 0.028375] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI > 0-39 > [ 0.028379] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.028382] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > level) > [ 0.028389] ACPI: Using ACPI (MADT) for SMP configuration information > [ 0.028390] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.028395] TSC deadline timer available > [ 0.028397] smpboot: Allowing 8 CPUs, 4 hotplug CPUs > [ 0.028426] PM: hibernation: Registered nosave memory: [mem > 0x00000000-0x00000fff] > [ 0.028430] PM: hibernation: Registered nosave memory: [mem > 0x0009d000-0x0009dfff] > [ 0.028431] PM: hibernation: Registered nosave memory: [mem > 0x0009e000-0x0009ffff] > [ 0.028433] PM: hibernation: Registered nosave memory: [mem > 0x000a0000-0x000dffff] > [ 0.028434] PM: hibernation: Registered nosave memory: [mem > 0x000e0000-0x000fffff] > [ 0.028436] PM: hibernation: Registered nosave memory: [mem > 0x95520000-0x95e1ffff] > [ 0.028439] PM: hibernation: Registered nosave memory: [mem > 0x9cabf000-0x9cebefff] > [ 0.028440] PM: hibernation: Registered nosave memory: [mem > 0x9cebf000-0x9cfbefff] > [ 0.028441] PM: hibernation: Registered nosave memory: [mem > 0x9cfbf000-0x9cffefff] > [ 0.028444] PM: hibernation: Registered nosave memory: [mem > 0x9d000000-0x9f9fffff] > [ 0.028445] PM: hibernation: Registered nosave memory: [mem > 0x9fa00000-0xdfffffff] > [ 0.028446] PM: hibernation: Registered nosave memory: [mem > 0xe0000000-0xefffffff] > [ 0.028448] PM: hibernation: Registered nosave memory: [mem > 0xf0000000-0xfe100fff] > [ 0.028449] PM: hibernation: Registered nosave memory: [mem > 0xfe101000-0xfe112fff] > [ 0.028450] PM: hibernation: Registered nosave memory: [mem > 0xfe113000-0xfeafffff] > [ 0.028451] PM: hibernation: Registered nosave memory: [mem > 0xfeb00000-0xfeb0ffff] > [ 0.028452] PM: hibernation: Registered nosave memory: [mem > 0xfeb10000-0xfebfffff] > [ 0.028453] PM: hibernation: Registered nosave memory: [mem > 0xfec00000-0xfec00fff] > [ 0.028455] PM: hibernation: Registered nosave memory: [mem > 0xfec01000-0xfecfffff] > [ 0.028456] PM: hibernation: Registered nosave memory: [mem > 0xfed00000-0xfee00fff] > [ 0.028457] PM: hibernation: Registered nosave memory: [mem > 0xfee01000-0xff9fffff] > [ 0.028458] PM: hibernation: Registered nosave memory: [mem > 0xffa00000-0xffffffff] > [ 0.028461] [mem 0x9fa00000-0xdfffffff] available for PCI devices > [ 0.028463] Booting paravirtualized kernel on bare hardware > [ 0.028466] clocksource: refined-jiffies: mask: 0xffffffff > max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns > [ 0.036116] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 > nr_node_ids:1 > [ 0.036510] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 > u262144 > [ 0.036521] pcpu-alloc: s212992 r8192 d28672 u262144 alloc=1*2097152 > [ 0.036526] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 > [ 0.036571] Fallback order for Node 0: 0 > [ 0.036575] Built 1 zonelists, mobility grouping on. Total pages: > 2045921 > [ 0.036577] Policy zone: Normal > [ 0.036579] Kernel command line: > BOOT_IMAGE=/boot/vmlinuz-6.1.0-26-amd64 > root=UUID=e2b594fa-eadc-4e1e-8b49-40381efc4390 ro quiet > [ 0.036649] Unknown kernel command line parameters > "BOOT_IMAGE=/boot/vmlinuz-6.1.0-26-amd64", will be passed to user space. > [ 0.036674] random: crng init done > [ 0.037317] Dentry cache hash table entries: 1048576 (order: 11, > 8388608 bytes, linear) > [ 0.037641] Inode-cache hash table entries: 524288 (order: 10, > 4194304 bytes, linear) > [ 0.037773] mem auto-init: stack:all(zero), heap alloc:on, heap > free:off > [ 0.037778] software IO TLB: area num 8. > [ 0.066576] Memory: 2507636K/8314224K available (14342K kernel code, > 2335K rwdata, 9076K rodata, 2796K init, 17396K bss, 326804K reserved, 0K > cma-reserved) > [ 0.066807] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, > Nodes=1 > [ 0.066826] Kernel/User page tables isolation: enabled > [ 0.066872] ftrace: allocating 40246 entries in 158 pages > [ 0.077728] ftrace: allocated 158 pages with 5 groups > [ 0.078739] Dynamic Preempt: voluntary > [ 0.078795] rcu: Preemptible hierarchical RCU implementation. > [ 0.078796] rcu: RCU restricting CPUs from NR_CPUS=8192 to > nr_cpu_ids=8. > [ 0.078799] Trampoline variant of Tasks RCU enabled. > [ 0.078799] Rude variant of Tasks RCU enabled. > [ 0.078800] Tracing variant of Tasks RCU enabled. > [ 0.078801] rcu: RCU calculated value of scheduler-enlistment delay > is 25 jiffies. > [ 0.078802] rcu: Adjusting geometry for rcu_fanout_leaf=16, > nr_cpu_ids=8 > [ 0.086434] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 > [ 0.086643] rcu: srcu_init: Setting srcu_struct sizes based on > contention. > [ 0.088776] Console: colour VGA+ 80x25 > [ 0.088805] printk: console [tty0] enabled > [ 0.088834] ACPI: Core revision 20220331 > [ 0.089044] hpet: HPET dysfunctional in PC10. Force disabled. > [ 0.089046] APIC: Switch to symmetric I/O mode setup > [ 0.089532] clocksource: tsc-early: mask: 0xffffffffffffffff > max_cycles: 0x22985d73ea6, max_idle_ns: 440795317019 ns > [ 0.089540] Calibrating delay loop (skipped), value calculated using > timer frequency.. 4800.08 BogoMIPS (lpj=9600160) > [ 0.089575] CPU0: Thermal monitoring enabled (TM1) > [ 0.089615] process: using mwait in idle threads > [ 0.089619] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 > [ 0.089621] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, > 1GB 4 > [ 0.089625] Spectre V1 : Mitigation: usercopy/swapgs barriers and > __user pointer sanitization > [ 0.089628] Spectre V2 : Mitigation: Retpolines > [ 0.089629] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling > RSB on context switch > [ 0.089631] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on > VMEXIT > [ 0.089632] Spectre V2 : Enabling Restricted Speculation for firmware > calls > [ 0.089634] Spectre V2 : mitigation: Enabling conditional Indirect > Branch Prediction Barrier > [ 0.089636] Spectre V2 : User space: Mitigation: STIBP via prctl > [ 0.089638] Speculative Store Bypass: Mitigation: Speculative Store > Bypass disabled via prctl > [ 0.089640] MDS: Mitigation: Clear CPU buffers > [ 0.089641] MMIO Stale Data: Unknown: No mitigations > [ 0.089643] SRBDS: Mitigation: Microcode > [ 0.089650] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating > point registers' > [ 0.089652] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' > [ 0.089653] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' > [ 0.089655] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 > [ 0.089657] x86/fpu: Enabled xstate features 0x7, context size is 832 > bytes, using 'standard' format. > [ 0.093537] Freeing SMP alternatives memory: 36K > [ 0.093537] pid_max: default: 32768 minimum: 301 > [ 0.093537] LSM: Security Framework initializing > [ 0.093537] landlock: Up and running. > [ 0.093537] Yama: disabled by default; enable with sysctl > kernel.yama.* > [ 0.093537] AppArmor: AppArmor initialized > [ 0.093537] TOMOYO Linux initialized > [ 0.093537] LSM support for eBPF active > [ 0.093537] Mount-cache hash table entries: 16384 (order: 5, 131072 > bytes, linear) > [ 0.093537] Mountpoint-cache hash table entries: 16384 (order: 5, > 131072 bytes, linear) > [ 0.093537] smpboot: CPU0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz > (family: 0x6, model: 0x45, stepping: 0x1) > [ 0.093537] cblist_init_generic: Setting adjustable number of > callback queues. > [ 0.093537] cblist_init_generic: Setting shift to 3 and lim to 1. > [ 0.093537] cblist_init_generic: Setting adjustable number of > callback queues. > [ 0.093537] cblist_init_generic: Setting shift to 3 and lim to 1. > [ 0.093537] cblist_init_generic: Setting adjustable number of > callback queues. > [ 0.093537] cblist_init_generic: Setting shift to 3 and lim to 1. > [ 0.093537] Performance Events: PEBS fmt2+, Haswell events, 16-deep > LBR, full-width counters, Intel PMU driver. > [ 0.093537] ... version: 3 > [ 0.093537] ... bit width: 48 > [ 0.093537] ... generic registers: 4 > [ 0.093537] ... value mask: 0000ffffffffffff > [ 0.093537] ... max period: 00007fffffffffff > [ 0.093537] ... fixed-purpose events: 3 > [ 0.093537] ... event mask: 000000070000000f > [ 0.093537] signal: max sigframe size: 1776 > [ 0.093537] Estimated ratio of average max frequency by base > frequency (times 1024): 1024 > [ 0.093537] rcu: Hierarchical SRCU implementation. > [ 0.093537] rcu: Max phase no-delay instances is 1000. > [ 0.093537] NMI watchdog: Enabled. Permanently consumes one hw-PMU > counter. > [ 0.093537] smp: Bringing up secondary CPUs ... > [ 0.093537] x86: Booting SMP configuration: > [ 0.093537] .... node #0, CPUs: #1 > [ 0.095127] MDS CPU bug present and SMT on, data leak possible. See > https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for > more details. > [ 0.095127] #2 #3 > [ 0.100579] smp: Brought up 1 node, 4 CPUs > [ 0.100579] smpboot: Max logical packages: 2 > [ 0.100579] smpboot: Total of 4 processors activated (19200.32 > BogoMIPS) > [ 0.118203] node 0 deferred pages initialised in 16ms > [ 0.118207] devtmpfs: initialized > [ 0.118207] x86/mm: Memory block size: 128MB > [ 0.118303] ACPI: PM: Registering ACPI NVS region [mem > 0x9cebf000-0x9cfbefff] (1048576 bytes) > [ 0.118303] clocksource: jiffies: mask: 0xffffffff max_cycles: > 0xffffffff, max_idle_ns: 7645041785100000 ns > [ 0.118303] futex hash table entries: 2048 (order: 5, 131072 bytes, > linear) > [ 0.118303] pinctrl core: initialized pinctrl subsystem > [ 0.118585] NET: Registered PF_NETLINK/PF_ROUTE protocol family > [ 0.118798] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic > allocations > [ 0.118905] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for > atomic allocations > [ 0.119011] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for > atomic allocations > [ 0.119026] audit: initializing netlink subsys (disabled) > [ 0.119038] audit: type=2000 audit(1742504509.028:1): > state=initialized audit_enabled=0 res=1 > [ 0.119038] thermal_sys: Registered thermal governor 'fair_share' > [ 0.119038] thermal_sys: Registered thermal governor 'bang_bang' > [ 0.119038] thermal_sys: Registered thermal governor 'step_wise' > [ 0.119038] thermal_sys: Registered thermal governor 'user_space' > [ 0.119038] thermal_sys: Registered thermal governor > 'power_allocator' > [ 0.121549] cpuidle: using governor ladder > [ 0.121554] cpuidle: using governor menu > [ 0.121596] Simple Boot Flag at 0x44 set to 0x1 > [ 0.121618] ACPI FADT declares the system doesn't support PCIe ASPM, > so disable it > [ 0.121620] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > [ 0.121719] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem > 0xe0000000-0xefffffff] (base 0xe0000000) > [ 0.121727] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in > E820 > [ 0.121737] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] > with a huge-page mapping due to MTRR override. > [ 0.122158] PCI: Using configuration type 1 for base access > [ 0.122198] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is > on > [ 0.122350] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' > [ 0.122916] kprobes: kprobe jump-optimization is enabled. All kprobes > are optimized if possible. > [ 0.122924] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 > pages > [ 0.122924] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB > page > [ 0.122924] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 > pages > [ 0.122924] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page > [ 0.122924] ACPI: Added _OSI(Module Device) > [ 0.122924] ACPI: Added _OSI(Processor Device) > [ 0.122924] ACPI: Added _OSI(3.0 _SCP Extensions) > [ 0.122924] ACPI: Added _OSI(Processor Aggregator Device) > [ 0.139073] ACPI: 5 ACPI AML tables successfully acquired and loaded > [ 0.140610] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored > [ 0.166673] ACPI: Dynamic OEM Table Load: > [ 0.166673] ACPI: SSDT 0xFFFF9106C0933C00 0003D3 (v01 PmRef Cpu0Cst > 00003001 INTL 20131115) > [ 0.166673] ACPI: Dynamic OEM Table Load: > [ 0.166673] ACPI: SSDT 0xFFFF9106C0F12000 0005AA (v01 PmRef ApIst > 00003000 INTL 20131115) > [ 0.167163] ACPI: Dynamic OEM Table Load: > [ 0.167171] ACPI: SSDT 0xFFFF9106C0F43200 000119 (v01 PmRef ApCst > 00003000 INTL 20131115) > [ 0.168664] ACPI: EC: EC started > [ 0.168666] ACPI: EC: interrupt blocked > [ 0.169027] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 > [ 0.169030] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle > transactions > [ 0.169033] ACPI: Interpreter enabled > [ 0.169076] ACPI: PM: (supports S0 S3 S4 S5) > [ 0.169078] ACPI: Using IOAPIC for interrupt routing > [ 0.169116] PCI: Using host bridge windows from ACPI; if necessary, > use "pci=nocrs" and report a bug > [ 0.169118] PCI: Using E820 reservations for host bridge windows > [ 0.169419] ACPI: watchdog: Skipping WDAT on this system because it > uses RTC SRAM > [ 0.169434] ACPI: Enabled 7 GPEs in block 00 to 7F > [ 0.190349] ACPI: PM: Power Resource [NVP3] > [ 0.190382] ACPI: PM: Power Resource [NVP2] > [ 0.196946] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) > [ 0.196955] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM > ClockPM Segments MSI HPX-Type3] > [ 0.201987] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug > SHPCHotplug PME AER PCIeCapability LTR] > [ 0.201990] acpi PNP0A08:00: FADT indicates ASPM is unsupported, > using BIOS configuration > [ 0.203008] PCI host bridge to bus 0000:00 > [ 0.203011] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 > window] > [ 0.203015] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff > window] > [ 0.203018] pci_bus 0000:00: root bus resource [mem > 0x000a0000-0x000bffff window] > [ 0.203020] pci_bus 0000:00: root bus resource [mem > 0x9fa00000-0xfeafffff window] > [ 0.203023] pci_bus 0000:00: root bus resource [bus 00-fe] > [ 0.203045] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 > [ 0.203146] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 > [ 0.203158] pci 0000:00:02.0: reg 0x10: [mem 0xb3000000-0xb33fffff > 64bit] > [ 0.203168] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff > 64bit pref] > [ 0.203174] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f] > [ 0.203193] pci 0000:00:02.0: Video device with shadowed ROM at [mem > 0x000c0000-0x000dffff] > [ 0.203417] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 > [ 0.203430] pci 0000:00:03.0: reg 0x10: [mem 0xb3710000-0xb3713fff > 64bit] > [ 0.203586] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 > [ 0.203605] pci 0000:00:14.0: reg 0x10: [mem 0xb3700000-0xb370ffff > 64bit] > [ 0.203669] pci 0000:00:14.0: PME# supported from D3hot D3cold > [ 0.203785] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 > [ 0.203806] pci 0000:00:16.0: reg 0x10: [mem 0xb3718000-0xb371801f > 64bit] > [ 0.203879] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold > [ 0.203955] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 > [ 0.203973] pci 0000:00:1b.0: reg 0x10: [mem 0xb3714000-0xb3717fff > 64bit] > [ 0.204049] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.204148] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400 > [ 0.204232] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.204532] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400 > [ 0.204619] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 0.204909] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400 > [ 0.204995] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > [ 0.205283] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400 > [ 0.205367] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > [ 0.205682] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 > [ 0.206186] pci 0000:00:1d.0: reg 0x10: [mem 0xb371c000-0xb371c3ff] > [ 0.207731] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold > [ 0.207852] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 > [ 0.208072] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 > [ 0.208086] pci 0000:00:1f.2: reg 0x10: [io 0x6088-0x608f] > [ 0.208094] pci 0000:00:1f.2: reg 0x14: [io 0x6094-0x6097] > [ 0.208102] pci 0000:00:1f.2: reg 0x18: [io 0x6080-0x6087] > [ 0.208110] pci 0000:00:1f.2: reg 0x1c: [io 0x6090-0x6093] > [ 0.208118] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f] > [ 0.208127] pci 0000:00:1f.2: reg 0x24: [mem 0xb371b000-0xb371b7ff] > [ 0.208165] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.208251] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 > [ 0.208269] pci 0000:00:1f.3: reg 0x10: [mem 0xb3719000-0xb37190ff > 64bit] > [ 0.208291] pci 0000:00:1f.3: reg 0x20: [io 0x6040-0x605f] > [ 0.208424] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 0.208501] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000 > [ 0.208523] pci 0000:04:00.0: reg 0x10: [io 0x5000-0x50ff] > [ 0.208554] pci 0000:04:00.0: reg 0x18: [mem 0xb3600000-0xb3600fff > 64bit] > [ 0.208573] pci 0000:04:00.0: reg 0x20: [mem 0xb3400000-0xb3403fff > 64bit pref] > [ 0.208685] pci 0000:04:00.0: supports D1 D2 > [ 0.208687] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot > D3cold > [ 0.208876] pci 0000:00:1c.2: PCI bridge to [bus 04] > [ 0.208880] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] > [ 0.208884] pci 0000:00:1c.2: bridge window [mem > 0xb3600000-0xb36fffff] > [ 0.208890] pci 0000:00:1c.2: bridge window [mem > 0xb3400000-0xb34fffff 64bit pref] > [ 0.208962] pci 0000:05:00.0: [10ec:b723] type 00 class 0x028000 > [ 0.208987] pci 0000:05:00.0: reg 0x10: [io 0x4000-0x40ff] > [ 0.209021] pci 0000:05:00.0: reg 0x18: [mem 0xb3500000-0xb3503fff > 64bit] > [ 0.209157] pci 0000:05:00.0: supports D1 D2 > [ 0.209158] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot > D3cold > [ 0.209376] pci 0000:00:1c.3: PCI bridge to [bus 05] > [ 0.209380] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] > [ 0.209384] pci 0000:00:1c.3: bridge window [mem > 0xb3500000-0xb35fffff] > [ 0.209482] pci 0000:01:00.0: [10de:1341] type 00 class 0x030200 > [ 0.209501] pci 0000:01:00.0: reg 0x10: [mem 0xb2000000-0xb2ffffff] > [ 0.209517] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff > 64bit pref] > [ 0.209532] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff > 64bit pref] > [ 0.209544] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f] > [ 0.209555] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff > pref] > [ 0.209579] pci 0000:01:00.0: Enabling HDA controller > [ 0.209687] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, > limited by 5.0 GT/s PCIe x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s > with 8.0 GT/s PCIe x4 link) > [ 0.209942] pci 0000:00:1c.4: PCI bridge to [bus 01] > [ 0.209946] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] > [ 0.209950] pci 0000:00:1c.4: bridge window [mem > 0xb2000000-0xb2ffffff] > [ 0.209955] pci 0000:00:1c.4: bridge window [mem > 0xa0000000-0xb1ffffff 64bit pref] > [ 0.214544] ACPI: PCI: Interrupt link LNKA configured for IRQ 7 > [ 0.214597] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 > [ 0.214599] ACPI: PCI: Interrupt link LNKB disabled > [ 0.214649] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 > [ 0.214699] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 > [ 0.214748] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 > [ 0.214750] ACPI: PCI: Interrupt link LNKE disabled > [ 0.214798] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 > [ 0.214799] ACPI: PCI: Interrupt link LNKF disabled > [ 0.214848] ACPI: PCI: Interrupt link LNKG configured for IRQ 10 > [ 0.214897] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 > [ 0.215339] ACPI: EC: interrupt unblocked > [ 0.215341] ACPI: EC: event unblocked > [ 0.215351] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 > [ 0.215353] ACPI: EC: GPE=0x1 > [ 0.215355] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization > complete > [ 0.215359] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle > transactions and events > [ 0.215445] iommu: Default domain type: Translated > [ 0.215445] iommu: DMA domain TLB invalidation policy: lazy mode > [ 0.258040] pps_core: LinuxPPS API ver. 1 registered > [ 0.258043] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 > Rodolfo Giometti <giome...@linux.it> > [ 0.258049] PTP clock support registered > [ 0.258063] EDAC MC: Ver: 3.0.0 > [ 0.258138] NetLabel: Initializing > [ 0.258138] NetLabel: domain hash size = 128 > [ 0.258138] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO > [ 0.258138] NetLabel: unlabeled traffic allowed by default > [ 0.258138] PCI: Using ACPI for IRQ routing > [ 0.264726] PCI: pci_cache_line_size set to 64 bytes > [ 0.264772] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] > [ 0.264775] e820: reserve RAM buffer [mem 0x95520000-0x97ffffff] > [ 0.264777] e820: reserve RAM buffer [mem 0x9cabf000-0x9fffffff] > [ 0.264779] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] > [ 0.264781] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff] > [ 0.264803] pci 0000:00:02.0: vgaarb: setting as boot VGA device > [ 0.264803] pci 0000:00:02.0: vgaarb: bridge control possible > [ 0.264803] pci 0000:00:02.0: vgaarb: VGA device added: > decodes=io+mem,owns=io+mem,locks=none > [ 0.264803] vgaarb: loaded > [ 0.267506] clocksource: Switched to clocksource tsc-early > [ 0.267695] VFS: Disk quotas dquot_6.6.0 > [ 0.267717] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 > bytes) > [ 0.267912] AppArmor: AppArmor Filesystem Enabled > [ 0.267938] pnp: PnP ACPI init > [ 0.268157] system 00:00: [io 0x0680-0x069f] has been reserved > [ 0.268163] system 00:00: [io 0xffff] has been reserved > [ 0.268166] system 00:00: [io 0xffff] has been reserved > [ 0.268168] system 00:00: [io 0xffff] has been reserved > [ 0.268171] system 00:00: [io 0x1800-0x18fe] has been reserved > [ 0.268173] system 00:00: [io 0x164e-0x164f] has been reserved > [ 0.268304] system 00:02: [io 0x1854-0x1857] has been reserved > [ 0.268533] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been > reserved > [ 0.268537] system 00:04: [mem 0xfed10000-0xfed17fff] has been > reserved > [ 0.268540] system 00:04: [mem 0xfed18000-0xfed18fff] has been > reserved > [ 0.268543] system 00:04: [mem 0xfed19000-0xfed19fff] has been > reserved > [ 0.268547] system 00:04: [mem 0xe0000000-0xefffffff] has been > reserved > [ 0.268549] system 00:04: [mem 0xfed20000-0xfed3ffff] has been > reserved > [ 0.268552] system 00:04: [mem 0xfed90000-0xfed93fff] has been > reserved > [ 0.268555] system 00:04: [mem 0xff000000-0xffffffff] could not be > reserved > [ 0.268557] system 00:04: [mem 0xfee00000-0xfeefffff] could not be > reserved > [ 0.268560] system 00:04: [mem 0x9fa20000-0x9fa20fff] has been > reserved > [ 0.268563] system 00:04: [mem 0x9fa10000-0x9fa1ffff] has been > reserved > [ 0.268782] system 00:05: [mem 0xfe102000-0xfe102fff] has been > reserved > [ 0.268786] system 00:05: [mem 0xfe104000-0xfe104fff] has been > reserved > [ 0.268789] system 00:05: [mem 0xfe106000-0xfe106fff] has been > reserved > [ 0.269351] pnp: PnP ACPI: found 6 devices > [ 0.273975] clocksource: acpi_pm: mask: 0xffffff max_cycles: > 0xffffff, max_idle_ns: 2085701024 ns > [ 0.274073] NET: Registered PF_INET protocol family > [ 0.274226] IP idents hash table entries: 131072 (order: 8, 1048576 > bytes, linear) > [ 0.277052] tcp_listen_portaddr_hash hash table entries: 4096 (order: > 4, 65536 bytes, linear) > [ 0.277100] Table-perturb hash table entries: 65536 (order: 6, 262144 > bytes, linear) > [ 0.277170] TCP established hash table entries: 65536 (order: 7, > 524288 bytes, linear) > [ 0.277477] TCP bind hash table entries: 65536 (order: 9, 2097152 > bytes, linear) > [ 0.278003] TCP: Hash tables configured (established 65536 bind > 65536) > [ 0.278103] MPTCP token hash table entries: 8192 (order: 5, 196608 > bytes, linear) > [ 0.278175] UDP hash table entries: 4096 (order: 5, 131072 bytes, > linear) > [ 0.278211] UDP-Lite hash table entries: 4096 (order: 5, 131072 > bytes, linear) > [ 0.278288] NET: Registered PF_UNIX/PF_LOCAL protocol family > [ 0.278299] NET: Registered PF_XDP protocol family > [ 0.278306] pci 0000:01:00.0: can't claim BAR 6 [mem > 0xfff80000-0xffffffff pref]: no compatible bridge window > [ 0.278315] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to > [bus 02] add_size 1000 > [ 0.278319] pci 0000:00:1c.0: bridge window [mem > 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align > 100000 > [ 0.278323] pci 0000:00:1c.0: bridge window [mem > 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 > [ 0.278336] pci 0000:00:1c.0: BAR 14: assigned [mem > 0x9fb00000-0x9fcfffff] > [ 0.278344] pci 0000:00:1c.0: BAR 15: assigned [mem > 0x9fd00000-0x9fefffff 64bit pref] > [ 0.278348] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] > [ 0.278353] pci 0000:00:1c.0: PCI bridge to [bus 02] > [ 0.278356] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] > [ 0.278362] pci 0000:00:1c.0: bridge window [mem > 0x9fb00000-0x9fcfffff] > [ 0.278366] pci 0000:00:1c.0: bridge window [mem > 0x9fd00000-0x9fefffff 64bit pref] > [ 0.278372] pci 0000:00:1c.2: PCI bridge to [bus 04] > [ 0.278375] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff] > [ 0.278380] pci 0000:00:1c.2: bridge window [mem > 0xb3600000-0xb36fffff] > [ 0.278384] pci 0000:00:1c.2: bridge window [mem > 0xb3400000-0xb34fffff 64bit pref] > [ 0.278390] pci 0000:00:1c.3: PCI bridge to [bus 05] > [ 0.278393] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] > [ 0.278397] pci 0000:00:1c.3: bridge window [mem > 0xb3500000-0xb35fffff] > [ 0.278407] pci 0000:01:00.0: BAR 6: no space for [mem size > 0x00080000 pref] > [ 0.278410] pci 0000:01:00.0: BAR 6: failed to assign [mem size > 0x00080000 pref] > [ 0.278412] pci 0000:00:1c.4: PCI bridge to [bus 01] > [ 0.278415] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] > [ 0.278420] pci 0000:00:1c.4: bridge window [mem > 0xb2000000-0xb2ffffff] > [ 0.278423] pci 0000:00:1c.4: bridge window [mem > 0xa0000000-0xb1ffffff 64bit pref] > [ 0.278430] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] > [ 0.278433] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] > [ 0.278436] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff > window] > [ 0.278438] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff > window] > [ 0.278441] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] > [ 0.278443] pci_bus 0000:02: resource 1 [mem 0x9fb00000-0x9fcfffff] > [ 0.278445] pci_bus 0000:02: resource 2 [mem 0x9fd00000-0x9fefffff > 64bit pref] > [ 0.278447] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff] > [ 0.278449] pci_bus 0000:04: resource 1 [mem 0xb3600000-0xb36fffff] > [ 0.278451] pci_bus 0000:04: resource 2 [mem 0xb3400000-0xb34fffff > 64bit pref] > [ 0.278453] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] > [ 0.278455] pci_bus 0000:05: resource 1 [mem 0xb3500000-0xb35fffff] > [ 0.278458] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] > [ 0.278459] pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb2ffffff] > [ 0.278462] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff > 64bit pref] > [ 0.298978] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took > 18408 usecs > [ 0.299015] PCI: CLS 64 bytes, default 64 > [ 0.299029] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) > [ 0.299030] software IO TLB: mapped [mem > 0x0000000098abf000-0x000000009cabf000] (64MB) > [ 0.299092] Trying to unpack rootfs image as initramfs... > [ 0.299547] Initialise system trusted keyrings > [ 0.299558] Key type blacklist registered > [ 0.299637] workingset: timestamp_bits=36 max_order=21 bucket_order=0 > [ 0.301632] zbud: loaded > [ 0.301961] integrity: Platform Keyring initialized > [ 0.301968] integrity: Machine keyring initialized > [ 0.301971] Key type asymmetric registered > [ 0.301973] Asymmetric key parser 'x509' registered > [ 0.922904] Freeing initrd memory: 60996K > [ 0.929962] alg: self-tests for CTR-KDF (hmac(sha256)) passed > [ 0.929996] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 248) > [ 0.930039] io scheduler mq-deadline registered > [ 0.931504] pcieport 0000:00:1c.0: PME: Signaling with IRQ 40 > [ 0.931541] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- > MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- > LLActRep+ > [ 0.931833] pcieport 0000:00:1c.2: PME: Signaling with IRQ 41 > [ 0.932048] pcieport 0000:00:1c.3: PME: Signaling with IRQ 42 > [ 0.932252] pcieport 0000:00:1c.4: PME: Signaling with IRQ 43 > [ 0.932360] shpchp: Standard Hot Plug PCI Controller Driver version: > 0.4 > [ 0.933482] thermal LNXTHERM:00: registered as thermal_zone0 > [ 0.933486] ACPI: thermal: Thermal Zone [TZ01] (45 C) > [ 0.933651] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > [ 0.934327] hpet_acpi_add: no address or irqs in _CRS > [ 0.934351] Linux agpgart interface v0.103 > [ 0.934440] AMD-Vi: AMD IOMMUv2 functionality not available on this > system - This is not a bug. > [ 0.934815] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 > irq 1 > [ 0.934820] i8042: PNP: PS/2 appears to have AUX port disabled, if > this is incorrect please boot with i8042.nopnp > [ 0.935894] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 0.936034] mousedev: PS/2 mouse device common for all mice > [ 0.936070] rtc_cmos 00:01: RTC can wake from S4 > [ 0.936352] rtc_cmos 00:01: registered as rtc0 > [ 0.936387] rtc_cmos 00:01: setting system clock to > 2025-03-20T21:01:52 UTC (1742504512) > [ 0.936415] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram > [ 0.936590] intel_pstate: Intel P-state driver initializing > [ 0.936936] ledtrig-cpu: registered to indicate activity on CPUs > [ 0.937732] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input0 > [ 0.949105] NET: Registered PF_INET6 protocol family > [ 0.954366] Segment Routing with IPv6 > [ 0.954379] In-situ OAM (IOAM) with IPv6 > [ 0.954404] mip6: Mobile IPv6 > [ 0.954419] NET: Registered PF_PACKET protocol family > [ 0.954468] mpls_gso: MPLS GSO support > [ 0.954750] microcode: sig=0x40651, pf=0x40, revision=0x26 > [ 0.954768] microcode: Microcode Update Driver: v2.2. > [ 0.954776] IPI shorthand broadcast: enabled > [ 0.954806] sched_clock: Marking stable (951816350, > 2862365)->(2576402634, -1621723919) > [ 0.955071] registered taskstats version 1 > [ 0.955082] Loading compiled-in X.509 certificates > [ 0.975944] Loaded X.509 cert 'Debian Secure Boot CA: > 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' > [ 0.975962] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - > linux: 14011249c2675ea8e5148542202005810584b25f' > [ 0.976467] zswap: loaded using pool lzo/zbud > [ 0.976627] Key type .fscrypt registered > [ 0.976629] Key type fscrypt-provisioning registered > [ 0.981337] Key type encrypted registered > [ 0.981344] AppArmor: AppArmor sha1 policy hashing enabled > [ 0.981352] ima: No TPM chip found, activating TPM-bypass! > [ 0.981354] ima: Allocated hash algorithm: sha256 > [ 0.981364] ima: No architecture policies found > [ 0.981373] evm: Initialising EVM extended attributes: > [ 0.981374] evm: security.selinux > [ 0.981375] evm: security.SMACK64 (disabled) > [ 0.981376] evm: security.SMACK64EXEC (disabled) > [ 0.981377] evm: security.SMACK64TRANSMUTE (disabled) > [ 0.981378] evm: security.SMACK64MMAP (disabled) > [ 0.981378] evm: security.apparmor > [ 0.981379] evm: security.ima > [ 0.981380] evm: security.capability > [ 0.981381] evm: HMAC attrs: 0x1 > [ 1.084556] clk: Disabling unused clocks > [ 1.085528] Freeing unused decrypted memory: 2036K > [ 1.085971] Freeing unused kernel image (initmem) memory: 2796K > [ 1.086009] Write protecting the kernel read-only data: 26624k > [ 1.086447] Freeing unused kernel image (text/rodata gap) memory: > 2040K > [ 1.086682] Freeing unused kernel image (rodata/data gap) memory: > 1164K > [ 1.138998] x86/mm: Checked W+X mappings: passed, no W+X pages found. > [ 1.139000] x86/mm: Checking user space page tables > [ 1.186582] x86/mm: Checked W+X mappings: passed, no W+X pages found. > [ 1.186586] Run /init as init process > [ 1.186587] with arguments: > [ 1.186589] /init > [ 1.186589] with environment: > [ 1.186590] HOME=/ > [ 1.186591] TERM=linux > [ 1.186592] BOOT_IMAGE=/boot/vmlinuz-6.1.0-26-amd64 > [ 1.279256] wmi_bus wmi_bus-PNP0C14:01: [Firmware Info]: > 00000000-0000-0000-0000-000000000000 has zero instances > [ 1.279263] wmi_bus wmi_bus-PNP0C14:01: [Firmware Info]: > 00000000-0000-0000-0000-000000000000 has zero instances > [ 1.279265] wmi_bus wmi_bus-PNP0C14:01: [Firmware Info]: > 00000000-0000-0000-0000-000000000000 has zero instances > [ 1.279267] wmi_bus wmi_bus-PNP0C14:01: [Firmware Info]: > 00000000-0000-0000-0000-000000000000 has zero instances > [ 1.292289] input: Power Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 > [ 1.294344] ACPI: battery: Slot [BAT1] (battery present) > [ 1.294519] hid: raw HID events driver (C) Jiri Kosina > [ 1.299527] i801_smbus 0000:00:1f.3: SPD Write Disable is set > [ 1.299564] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt > [ 1.299568] ACPI: watchdog: Skipping WDAT on this system because it > uses RTC SRAM > [ 1.302767] ACPI: button: Power Button [PWRB] > [ 1.302854] input: Sleep Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 > [ 1.302879] tsc: Refined TSC clocksource calibration: 2399.999 MHz > [ 1.302887] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: > 0x2298364cab5, max_idle_ns: 440795214892 ns > [ 1.308428] clocksource: Switched to clocksource tsc > [ 1.309528] ACPI: button: Sleep Button [SLPB] > [ 1.316399] input: Lid Switch as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3 > [ 1.316455] ACPI: button: Lid Switch [LID] > [ 1.316540] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 > [ 1.319012] SCSI subsystem initialized > [ 1.323032] ACPI: watchdog: Skipping WDAT on this system because it > uses RTC SRAM > [ 1.323846] i2c i2c-2: 2/2 memory slots populated (from DMI) > [ 1.324306] i2c i2c-2: Successfully instantiated SPD at 0x50 > [ 1.340948] ACPI: button: Power Button [PWRF] > [ 1.370557] ACPI: bus type drm_connector registered > [ 1.376268] ACPI: bus type USB registered > [ 1.376297] usbcore: registered new interface driver usbfs > [ 1.376308] usbcore: registered new interface driver hub > [ 1.376323] usbcore: registered new device driver usb > [ 1.537359] input: SYN1B7C:01 06CB:2970 Mouse as > /devices/pci0000:00/INT33C3:00/i2c-1/i2c-SYN1B7C:01/0018:06CB:2970.0001/input/input5 > [ 1.537909] input: SYN1B7C:01 06CB:2970 Touchpad as > /devices/pci0000:00/INT33C3:00/i2c-1/i2c-SYN1B7C:01/0018:06CB:2970.0001/input/input6 > [ 1.538008] hid-generic 0018:06CB:2970.0001: input,hidraw0: I2C HID > v1.00 Mouse [SYN1B7C:01 06CB:2970] on i2c-SYN1B7C:01 > [ 1.539843] r8169 0000:04:00.0: can't disable ASPM; OS doesn't have > ASPM control > [ 1.539943] ehci-pci 0000:00:1d.0: EHCI Host Controller > [ 1.539951] ehci-pci 0000:00:1d.0: new USB bus registered, assigned > bus number 1 > [ 1.539963] ehci-pci 0000:00:1d.0: debug port 2 > [ 1.541173] libata version 3.00 loaded. > [ 1.544005] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb371c000 > [ 1.547029] ahci 0000:00:1f.2: version 3.0 > [ 1.557250] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps > 0x3 impl SATA mode > [ 1.557259] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio > slum part deso sadm sds apst > [ 1.557678] scsi host0: ahci > [ 1.557938] r8169 0000:04:00.0 eth0: RTL8168g/8111g, > c4:54:44:d5:54:7d, XID 4c0, IRQ 45 > [ 1.557944] r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 > bytes, tx checksumming: ko] > [ 1.558137] scsi host1: ahci > [ 1.558565] ata1: SATA max UDMA/133 abar m2048@0xb371b000 port > 0xb371b100 irq 44 > [ 1.558569] ata2: SATA max UDMA/133 abar m2048@0xb371b000 port > 0xb371b180 irq 44 > [ 1.558889] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 > [ 1.558982] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002, bcdDevice= 6.01 > [ 1.558986] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.558989] usb usb1: Product: EHCI Host Controller > [ 1.558991] usb usb1: Manufacturer: Linux 6.1.0-26-amd64 ehci_hcd > [ 1.558994] usb usb1: SerialNumber: 0000:00:1d.0 > [ 1.559209] hub 1-0:1.0: USB hub found > [ 1.559219] hub 1-0:1.0: 2 ports detected > [ 1.559386] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 1.559431] xhci_hcd 0000:00:14.0: new USB bus registered, assigned > bus number 2 > [ 1.560479] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version > 0x100 quirks 0x000000000004b810 > [ 1.560648] xhci_hcd 0000:00:14.0: xHCI Host Controller > [ 1.560654] xhci_hcd 0000:00:14.0: new USB bus registered, assigned > bus number 3 > [ 1.560659] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed > [ 1.560732] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0002, bcdDevice= 6.01 > [ 1.560736] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.560738] usb usb2: Product: xHCI Host Controller > [ 1.560739] usb usb2: Manufacturer: Linux 6.1.0-26-amd64 xhci-hcd > [ 1.560740] usb usb2: SerialNumber: 0000:00:14.0 > [ 1.560891] hub 2-0:1.0: USB hub found > [ 1.560910] hub 2-0:1.0: 9 ports detected > [ 1.561647] usb usb3: New USB device found, idVendor=1d6b, > idProduct=0003, bcdDevice= 6.01 > [ 1.561652] usb usb3: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 1.561655] usb usb3: Product: xHCI Host Controller > [ 1.561657] usb usb3: Manufacturer: Linux 6.1.0-26-amd64 xhci-hcd > [ 1.561659] usb usb3: SerialNumber: 0000:00:14.0 > [ 1.561805] hub 3-0:1.0: USB hub found > [ 1.561817] hub 3-0:1.0: 4 ports detected > [ 1.583153] r8169 0000:04:00.0 enp4s0: renamed from eth0 > [ 1.611017] input: SYN1B7C:01 06CB:2970 Mouse as > /devices/pci0000:00/INT33C3:00/i2c-1/i2c-SYN1B7C:01/0018:06CB:2970.0001/input/input8 > [ 1.611106] input: SYN1B7C:01 06CB:2970 Touchpad as > /devices/pci0000:00/INT33C3:00/i2c-1/i2c-SYN1B7C:01/0018:06CB:2970.0001/input/input9 > [ 1.611188] hid-multitouch 0018:06CB:2970.0001: input,hidraw0: I2C > HID v1.00 Mouse [SYN1B7C:01 06CB:2970] on i2c-SYN1B7C:01 > [ 1.814965] usb 2-1: new low-speed USB device number 2 using xhci_hcd > [ 1.814967] usb 1-1: new high-speed USB device number 2 using > ehci-pci > [ 1.874537] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 1.874580] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > [ 1.875743] ata1.00: ATA-8: Hitachi HTS545016B9A300, PBBOC60N, max > UDMA/133 > [ 1.878043] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max > UDMA/100 > [ 1.878197] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth > 32), AA > [ 1.879806] ata1.00: configured for UDMA/133 > [ 1.880428] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54501 > C60N PQ: 0 ANSI: 5 > [ 1.882754] ata2.00: configured for UDMA/100 > [ 1.889857] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC > 1.00 PQ: 0 ANSI: 5 > [ 1.963756] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 > GB/149 GiB) > [ 1.963773] sd 0:0:0:0: [sda] Write Protect is off > [ 1.963776] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.963808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 1.963845] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes > [ 1.991393] usb 2-1: New USB device found, idVendor=046d, > idProduct=c077, bcdDevice=72.00 > [ 1.991400] usb 2-1: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 1.991403] usb 2-1: Product: USB Optical Mouse > [ 1.991406] usb 2-1: Manufacturer: Logitech > [ 2.003177] usb 1-1: New USB device found, idVendor=8087, > idProduct=8000, bcdDevice= 0.04 > [ 2.003183] usb 1-1: New USB device strings: Mfr=0, Product=0, > SerialNumber=0 > [ 2.003484] hub 1-1:1.0: USB hub found > [ 2.003599] hub 1-1:1.0: 8 ports detected > [ 2.062399] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram > cd/rw xa/form2 cdda tray > [ 2.062405] cdrom: Uniform CD-ROM driver Revision: 3.20 > [ 2.118961] usb 2-5: new full-speed USB device number 3 using > xhci_hcd > [ 2.215362] ACPI Warning: \_SB.PCI0.RP05.PEGP._DSM: Argument #4 type > mismatch - Found [Buffer], ACPI requires [Package] > (20220331/nsarguments-61) > [ 2.215531] pci 0000:01:00.0: optimus capabilities: enabled, status > dynamic power, hda bios codec supported > [ 2.215535] VGA switcheroo: detected Optimus DSM method > \_SB_.PCI0.RP05.PEGP handle > [ 2.215559] nouveau 0000:01:00.0: enabling device (0006 -> 0007) > [ 2.215762] nouveau 0000:01:00.0: NVIDIA GM108 (118010a2) > [ 2.225301] nouveau 0000:01:00.0: bios: version 82.08.14.00.3f > [ 2.291704] usb 2-5: New USB device found, idVendor=0bda, > idProduct=b005, bcdDevice= 2.00 > [ 2.291711] usb 2-5: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [ 2.291714] usb 2-5: Product: Bluetooth Radio > [ 2.291717] usb 2-5: Manufacturer: Realtek > [ 2.291719] usb 2-5: SerialNumber: 00e04c000001 > [ 2.291737] nouveau 0000:01:00.0: pci: failed to adjust cap speed > [ 2.291741] nouveau 0000:01:00.0: pci: failed to adjust lnkctl speed > [ 2.299393] BUG: unable to handle page fault for address: > ffffa0cf8500020c > [ 2.299447] #PF: supervisor read access in kernel mode > [ 2.299496] #PF: error_code(0x0000) - not-present page > [ 2.299546] PGD 100000067 P4D 100000067 PUD 1001c7067 PMD 0 > [ 2.299599] Oops: 0000 [#1] PREEMPT SMP PTI > [ 2.299647] CPU: 3 PID: 127 Comm: (udev-worker) Not tainted > 6.1.0-26-amd64 #1 Debian 6.1.112-1 > [ 2.299705] Hardware name: Acer Aspire E5-771G/EA70_HB, BIOS V1.09 > 07/17/2014 > [ 2.299758] RIP: 0010:ioread32+0x2e/0x60 > [ 2.299809] Code: ff 03 00 77 25 48 81 ff 00 00 01 00 76 08 89 fa ed > c3 cc cc cc cc 8b 05 00 23 66 01 85 c0 75 11 b8 ff ff ff ff c3 cc cc cc > cc <8b> 07 c3 cc cc cc cc 83 e8 01 48 89 fe 48 c7 c2 cd 42 5a a9 48 c7 > [ 2.299887] RSP: 0018:ffffa0cf803df3f8 EFLAGS: 00010292 > [ 2.299937] RAX: ffff91071149d400 RBX: 0000000000000ef0 RCX: > 00000000ffffffff > [ 2.299990] RDX: 0000000000000000 RSI: 0000000000ef0000 RDI: > ffffa0cf8500020c > [ 2.300043] RBP: ffff91071149d400 R08: ffffa0cf803df464 R09: > 000000000000080f > [ 2.300096] R10: 0000000000000000 R11: 0000000000000000 R12: > ffffffffc09f2240 > [ 2.300150] R13: 0000000000000000 R14: 00000000ffffffff R15: > 0000000000000ef1 > [ 2.300203] FS: 00007f795fedf8c0(0000) GS:ffff9108172c0000(0000) > knlGS:0000000000000000 > [ 2.300258] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 2.300309] CR2: ffffa0cf8500020c CR3: 0000000100c48002 CR4: > 00000000001706e0 > [ 2.300362] Call Trace: > [ 2.300406] <TASK> > [ 2.300463] ? __die_body.cold+0x1a/0x1f > [ 2.300528] ? page_fault_oops+0xd2/0x2b0 > [ 2.300591] ? search_module_extables+0x15/0x60 > [ 2.300656] ? search_bpf_extables+0x5b/0x80 > [ 2.300721] ? exc_page_fault+0xca/0x170 > [ 2.300785] ? asm_exc_page_fault+0x22/0x30 > [ 2.300850] ? ioread32+0x2e/0x60 > [ 2.300911] ? ramfuc_reg+0x30/0x30 [nouveau] > [ 2.301071] gf108_ram_probe_fbp_amount+0x70/0xa0 [nouveau] > [ 2.301230] gf100_ram_ctor+0xe5/0x220 [nouveau] > [ 2.301386] gk104_ram_new_+0x88/0xb90 [nouveau] > [ 2.301540] ? nvkm_timer_alarm_trigger+0x148/0x1e0 [nouveau] > [ 2.301707] nvkm_fb_oneinit+0x2b/0xa0 [nouveau] > [ 2.301856] nvkm_subdev_init+0x53/0xd0 [nouveau] > [ 2.301996] ? ktime_get+0x3b/0xa0 > [ 2.302059] nvkm_device_init+0x11a/0x1b0 [nouveau] > [ 2.302224] nvkm_udevice_init+0x45/0x70 [nouveau] > [ 2.302389] nvkm_object_init+0x3d/0x110 [nouveau] > [ 2.302528] nvkm_ioctl_new+0x176/0x200 [nouveau] > [ 2.302667] ? nvkm_client_notify+0x30/0x30 [nouveau] > [ 2.302805] ? nvkm_udevice_rd08+0x30/0x30 [nouveau] > [ 2.302972] nvkm_ioctl+0xd8/0x180 [nouveau] > [ 2.303109] nvif_object_ctor+0x110/0x190 [nouveau] > [ 2.303246] nvif_device_ctor+0x1f/0x60 [nouveau] > [ 2.303383] nouveau_cli_init+0x160/0x490 [nouveau] > [ 2.303549] nouveau_drm_device_init+0x74/0x7a0 [nouveau] > [ 2.303717] ? pci_bus_read_config_word+0x49/0x80 > [ 2.303783] ? pci_update_current_state+0x6e/0xa0 > [ 2.303848] nouveau_drm_probe+0x128/0x1f0 [nouveau] > [ 2.304014] local_pci_probe+0x41/0x80 > [ 2.304076] pci_device_probe+0xc3/0x240 > [ 2.304139] really_probe+0xde/0x380 > [ 2.304202] ? pm_runtime_barrier+0x50/0x90 > [ 2.304267] __driver_probe_device+0x78/0x120 > [ 2.304331] driver_probe_device+0x1f/0x90 > [ 2.304395] __driver_attach+0xce/0x1c0 > [ 2.304458] ? __device_attach_driver+0x110/0x110 > [ 2.304522] bus_for_each_dev+0x87/0xd0 > [ 2.304585] bus_add_driver+0x1ae/0x200 > [ 2.304648] driver_register+0x89/0xe0 > [ 2.304711] ? 0xffffffffc0b30000 > [ 2.304771] do_one_initcall+0x59/0x220 > [ 2.304836] do_init_module+0x4a/0x1f0 > [ 2.304899] __do_sys_finit_module+0xac/0x120 > [ 2.304964] do_syscall_64+0x55/0xb0 > [ 2.305027] ? ksys_mmap_pgoff+0xe8/0x1f0 > [ 2.305090] ? exit_to_user_mode_prepare+0x40/0x1e0 > [ 2.305154] ? syscall_exit_to_user_mode+0x1e/0x40 > [ 2.305219] ? do_syscall_64+0x61/0xb0 > [ 2.305281] ? __do_sys_newfstatat+0x4e/0x80 > [ 2.305345] ? exit_to_user_mode_prepare+0x40/0x1e0 > [ 2.305409] ? syscall_exit_to_user_mode+0x1e/0x40 > [ 2.305474] ? do_syscall_64+0x61/0xb0 > [ 2.305536] ? do_filp_open+0xaf/0x160 > [ 2.305598] ? __lookup_slow+0x130/0x130 > [ 2.305662] ? kmem_cache_free+0x15/0x310 > [ 2.305726] ? do_sys_openat2+0x9b/0x170 > [ 2.305789] ? exit_to_user_mode_prepare+0x40/0x1e0 > [ 2.305853] ? syscall_exit_to_user_mode+0x1e/0x40 > [ 2.305918] ? do_syscall_64+0x61/0xb0 > [ 2.305980] ? exit_to_user_mode_prepare+0x40/0x1e0 > [ 2.306044] ? syscall_exit_to_user_mode+0x1e/0x40 > [ 2.306109] ? do_syscall_64+0x61/0xb0 > [ 2.306170] ? do_syscall_64+0x61/0xb0 > [ 2.306231] ? do_syscall_64+0x61/0xb0 > [ 2.306293] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 > [ 2.306359] RIP: 0033:0x7f79605f07d9 > [ 2.306420] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 > 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f > 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d f7 05 0d 00 f7 d8 64 89 01 48 > [ 2.306541] RSP: 002b:00007ffeaa570618 EFLAGS: 00000246 ORIG_RAX: > 0000000000000139 > [ 2.306624] RAX: ffffffffffffffda RBX: 0000563b31275c10 RCX: > 00007f79605f07d9 > [ 2.306692] RDX: 0000000000000000 RSI: 00007f7960783efd RDI: > 0000000000000014 > [ 2.306759] RBP: 00007f7960783efd R08: 0000000000000000 R09: > 0000563b3125c110 > [ 2.306827] R10: 0000000000000014 R11: 0000000000000246 R12: > 0000000000020000 > [ 2.306894] R13: 0000000000000000 R14: 0000563b3125dab0 R15: > 00007ffeaa570850 > [ 2.306963] </TASK> > [ 2.307019] Modules linked in: i915(+) nouveau(+) sd_mod(+) t10_pi > sr_mod(+) crc64_rocksoft crc64 cdrom crc_t10dif drm_buddy mxm_wmi > crct10dif_generic i2c_algo_bit drm_display_helper cec ahci libahci > rc_core drm_ttm_helper hid_multitouch xhci_pci ehci_pci hid_generic ttm > libata crct10dif_pclmul crct10dif_common xhci_hcd r8169 ehci_hcd > drm_kms_helper realtek mdio_devres crc32_pclmul usbcore drm crc32c_intel > libphy lpc_ich usb_common scsi_mod i2c_hid_acpi i2c_i801 i2c_hid > i2c_smbus scsi_common battery hid video wmi button > [ 2.307286] CR2: ffffa0cf8500020c > [ 2.307346] ---[ end trace 0000000000000000 ]--- > [ 2.307408] RIP: 0010:ioread32+0x2e/0x60 > [ 2.307471] Code: ff 03 00 77 25 48 81 ff 00 00 01 00 76 08 89 fa ed > c3 cc cc cc cc 8b 05 00 23 66 01 85 c0 75 11 b8 ff ff ff ff c3 cc cc cc > cc <8b> 07 c3 cc cc cc cc 83 e8 01 48 89 fe 48 c7 c2 cd 42 5a a9 48 c7 > [ 2.307592] RSP: 0018:ffffa0cf803df3f8 EFLAGS: 00010292 > [ 2.307656] RAX: ffff91071149d400 RBX: 0000000000000ef0 RCX: > 00000000ffffffff > [ 2.307723] RDX: 0000000000000000 RSI: 0000000000ef0000 RDI: > ffffa0cf8500020c > [ 2.307790] RBP: ffff91071149d400 R08: ffffa0cf803df464 R09: > 000000000000080f > [ 2.307858] R10: 0000000000000000 R11: 0000000000000000 R12: > ffffffffc09f2240 > [ 2.307925] R13: 0000000000000000 R14: 00000000ffffffff R15: > 0000000000000ef1 > [ 2.307992] FS: 00007f795fedf8c0(0000) GS:ffff9108172c0000(0000) > knlGS:0000000000000000 > [ 2.308076] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 2.308141] CR2: ffffa0cf8500020c CR3: 0000000100c48002 CR4: > 00000000001706e0 > [ 2.308208] note: (udev-worker)[127] exited with irqs disabled > [ 2.325441] sda: sda1 sda2 < sda5 > > [ 2.325818] sd 0:0:0:0: [sda] Attached SCSI disk > [ 2.426885] usb 2-7: new high-speed USB device number 4 using > xhci_hcd > [ 2.472759] i915 0000:00:02.0: vgaarb: deactivate vga console > [ 2.473991] Console: switching to colour dummy device 80x25 > [ 2.475019] i915 0000:00:02.0: vgaarb: changed VGA decodes: > olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 2.512795] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 2.523665] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on > minor 1 > [ 2.524298] ACPI: video: [Firmware Bug]: ACPI(PEGP) defines _DOD but > not _DOS > [ 2.524859] ACPI: video: Video Device [PEGP] (multi-head: yes rom: > yes post: no) > [ 2.524867] ACPI BIOS Error (bug): Could not resolve symbol > [\_SB.PCI0.GFX0.DD02._BCL], AE_NOT_FOUND (20220331/psargs-330) > [ 2.524874] ACPI Error: Aborting method \_SB.PCI0.RP05.PEGP.DD02._BCL > due to previous error (AE_NOT_FOUND) (20220331/psparse-529) > [ 2.524916] input: Video Bus as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input11 > [ 2.526134] ACPI: video: Video Device [GFX0] (multi-head: yes rom: > no post: no) > [ 2.526270] input: Video Bus as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12 > [ 2.529222] fbcon: i915drmfb (fb0) is primary device > [ 2.648181] usb 2-7: New USB device found, idVendor=1bcf, > idProduct=2c6e, bcdDevice= 0.02 > [ 2.648187] usb 2-7: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [ 2.648190] usb 2-7: Product: HD WebCam > [ 2.648192] usb 2-7: Manufacturer: NC.21411.0294260C2F3LM0002 > [ 2.728423] input: Logitech USB Optical Mouse as > /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C077.0002/input/input13 > [ 2.728523] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID > v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-1/input0 > [ 2.728574] usbcore: registered new interface driver usbhid > [ 2.728575] usbhid: USB HID core driver > [ 3.657759] Console: switching to colour frame buffer device 200x56 > [ 3.676756] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer > device > [ 3.771434] PM: Image not found (code -22) > [ 4.600119] EXT4-fs (sda1): mounted filesystem with ordered data > mode. Quota mode: none. > [ 4.966043] Not activating Mandatory Access Control as > /sbin/tomoyo-init does not exist. > [ 6.631161] systemd[1]: Inserted module 'autofs4' > [ 6.935510] systemd[1]: systemd 252.36-1~deb12u1 running in system > mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT > -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC > +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 > +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT > default-hierarchy=unified) > [ 6.935723] systemd[1]: Detected architecture x86-64. > [ 6.976121] systemd[1]: Hostname set to <aspire>. > [ 9.206364] systemd[1]: Queued start job for default target > graphical.target. > [ 9.229312] systemd[1]: Created slice system-getty.slice - Slice > /system/getty. > [ 9.230332] systemd[1]: Created slice system-modprobe.slice - Slice > /system/modprobe. > [ 9.231123] systemd[1]: Created slice user.slice - User and Session > Slice. > [ 9.231396] systemd[1]: Started systemd-ask-password-wall.path - > Forward Password Requests to Wall Directory Watch. > [ 9.231925] systemd[1]: Set up automount > proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats > File System Automount Point. > [ 9.232079] systemd[1]: Expecting device > dev-disk-by\x2duuid-0af590e2\x2d0985\x2d41d8\x2d9a5e\x2d374b01d2a2eb.device > - /dev/disk/by-uuid/0af590e2-0985-41d8-9a5e-374b01d2a2eb... > [ 9.232256] systemd[1]: Reached target integritysetup.target - Local > Integrity Protected Volumes. > [ 9.232394] systemd[1]: Reached target remote-fs.target - Remote File > Systems. > [ 9.232474] systemd[1]: Reached target slices.target - Slice Units. > [ 9.232613] systemd[1]: Reached target veritysetup.target - Local > Verity Protected Volumes. > [ 9.233026] systemd[1]: Listening on systemd-fsckd.socket - fsck to > fsckd communication Socket. > [ 9.233280] systemd[1]: Listening on systemd-initctl.socket - initctl > Compatibility Named Pipe. > [ 9.234112] systemd[1]: Listening on systemd-journald-audit.socket - > Journal Audit Socket. > [ 9.234381] systemd[1]: Listening on systemd-journald-dev-log.socket > - Journal Socket (/dev/log). > [ 9.234646] systemd[1]: Listening on systemd-journald.socket - > Journal Socket. > [ 9.234954] systemd[1]: Listening on systemd-udevd-control.socket - > udev Control Socket. > [ 9.235183] systemd[1]: Listening on systemd-udevd-kernel.socket - > udev Kernel Socket. > [ 9.236578] systemd[1]: Mounting dev-hugepages.mount - Huge Pages > File System... > [ 9.237872] systemd[1]: Mounting dev-mqueue.mount - POSIX Message > Queue File System... > [ 9.238962] systemd[1]: Mounting sys-kernel-debug.mount - Kernel > Debug File System... > [ 9.239901] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel > Trace File System... > [ 9.258531] systemd[1]: Starting keyboard-setup.service - Set the > console keyboard layout... > [ 9.260099] systemd[1]: Starting kmod-static-nodes.service - Create > List of Static Device Nodes... > [ 9.261197] systemd[1]: Starting modprobe@configfs.service - Load > Kernel Module configfs... > [ 9.262851] systemd[1]: Starting modprobe@dm_mod.service - Load > Kernel Module dm_mod... > [ 9.264597] systemd[1]: Starting modprobe@drm.service - Load Kernel > Module drm... > [ 9.265815] systemd[1]: Starting modprobe@efi_pstore.service - Load > Kernel Module efi_pstore... > [ 9.267481] systemd[1]: Starting modprobe@fuse.service - Load Kernel > Module fuse... > [ 9.269168] systemd[1]: Starting modprobe@loop.service - Load Kernel > Module loop... > [ 9.269379] systemd[1]: systemd-fsck-root.service - File System Check > on Root Device was skipped because of an unmet condition check > (ConditionPathExists=!/run/initramfs/fsck-root). > [ 9.271183] systemd[1]: Starting systemd-journald.service - Journal > Service... > [ 9.463676] loop: module loaded > [ 9.584481] fuse: init (API version 7.38) > [ 9.601064] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is > disabled. Duplicate IMA measurements will not be recorded in the IMA > log. > [ 9.601213] device-mapper: uevent: version 1.0.3 > [ 9.601436] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) > initialised: dm-de...@redhat.com > [ 9.635146] systemd[1]: Starting systemd-modules-load.service - Load > Kernel Modules... > [ 9.636411] systemd[1]: Starting systemd-remount-fs.service - Remount > Root and Kernel File Systems... > [ 9.637446] systemd[1]: Starting systemd-udev-trigger.service - > Coldplug All udev Devices... > [ 9.639050] systemd[1]: Finished kmod-static-nodes.service - Create > List of Static Device Nodes. > [ 9.639572] systemd[1]: modprobe@configfs.service: Deactivated > successfully. > [ 9.639722] systemd[1]: Finished modprobe@configfs.service - Load > Kernel Module configfs. > [ 9.640005] systemd[1]: modprobe@dm_mod.service: Deactivated > successfully. > [ 9.640149] systemd[1]: Finished modprobe@dm_mod.service - Load > Kernel Module dm_mod. > [ 9.640426] systemd[1]: modprobe@drm.service: Deactivated > successfully. > [ 9.641158] systemd[1]: Finished modprobe@drm.service - Load Kernel > Module drm. > [ 9.642027] systemd[1]: modprobe@efi_pstore.service: Deactivated > successfully. > [ 9.642761] systemd[1]: Finished modprobe@efi_pstore.service - Load > Kernel Module efi_pstore. > [ 9.643759] systemd[1]: modprobe@fuse.service: Deactivated > successfully. > [ 9.644516] systemd[1]: Finished modprobe@fuse.service - Load Kernel > Module fuse. > [ 9.645391] systemd[1]: modprobe@loop.service: Deactivated > successfully. > [ 9.646117] systemd[1]: Finished modprobe@loop.service - Load Kernel > Module loop. > [ 9.647746] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE > Control File System... > [ 9.649322] systemd[1]: Mounting sys-kernel-config.mount - Kernel > Configuration File System... > [ 9.650273] systemd[1]: systemd-repart.service - Repartition Root > Disk was skipped because no trigger condition checks were met. > [ 9.770116] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File > System. > [ 9.770997] systemd[1]: Mounted dev-mqueue.mount - POSIX Message > Queue File System. > [ 9.771831] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug > File System. > [ 9.772660] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel > Trace File System. > [ 9.773475] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE > Control File System. > [ 9.774271] systemd[1]: Mounted sys-kernel-config.mount - Kernel > Configuration File System. > [ 9.781000] systemd[1]: Started systemd-journald.service - Journal > Service. > [ 9.902948] EXT4-fs (sda1): re-mounted. Quota mode: none. > [ 10.150379] systemd-journald[258]: Received client request to flush > runtime journal. > [ 10.671121] lp: driver loaded but no devices found > [ 10.794627] ppdev: user-space parallel port driver > [ 14.506943] audit: type=1400 audit(1742504526.064:2): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="nvidia_modprobe" pid=305 comm="apparmor_parser" > [ 14.508858] audit: type=1400 audit(1742504526.064:3): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="nvidia_modprobe//kmod" pid=305 comm="apparmor_parser" > [ 14.527822] audit: type=1400 audit(1742504526.088:4): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="lsb_release" pid=304 comm="apparmor_parser" > [ 14.698139] audit: type=1400 audit(1742504526.256:5): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=306 > comm="apparmor_parser" > [ 14.700728] audit: type=1400 audit(1742504526.256:6): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=306 > comm="apparmor_parser" > [ 14.701558] audit: type=1400 audit(1742504526.256:7): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="/usr/lib/connman/scripts/dhclient-script" pid=306 > comm="apparmor_parser" > [ 14.702176] audit: type=1400 audit(1742504526.256:8): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="/{,usr/}sbin/dhclient" pid=306 comm="apparmor_parser" > [ 14.741301] audit: type=1400 audit(1742504526.300:9): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="/usr/bin/man" pid=307 comm="apparmor_parser" > [ 14.742091] audit: type=1400 audit(1742504526.300:10): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="man_filter" pid=307 comm="apparmor_parser" > [ 14.742723] audit: type=1400 audit(1742504526.300:11): > apparmor="STATUS" operation="profile_load" profile="unconfined" > name="man_groff" pid=307 comm="apparmor_parser" > [ 16.768371] ACPI: AC: AC Adapter [ACAD] (on-line) > [ 17.363934] input: PC Speaker as > /devices/platform/pcspkr/input/input14 > [ 17.516665] at24 2-0050: supply vcc not found, using dummy regulator > [ 17.518935] at24 2-0050: 256 byte spd EEPROM, read-only > [ 17.608529] acer_wmi: Acer Laptop ACPI-WMI Extras > [ 17.610656] acer_wmi: Function bitmap for Communication Button: 0x801 > [ 17.627328] input: Acer WMI hotkeys as /devices/virtual/input/input15 > [ 17.794218] sd 0:0:0:0: Attached scsi generic sg0 type 0 > [ 17.796039] sr 1:0:0:0: Attached scsi generic sg1 type 5 > [ 18.010531] iTCO_vendor_support: vendor-support=0 > [ 18.249668] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, > 655360 ms ovfl timer > [ 18.250400] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules > [ 18.251259] RAPL PMU: hw unit of domain package 2^-14 Joules > [ 18.251950] RAPL PMU: hw unit of domain dram 2^-14 Joules > [ 18.252622] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules > [ 18.347684] cryptd: max_cpu_qlen set to 1000 > [ 18.355629] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point_LP TCO > device (Version=2, TCOBASE=0x1860) > [ 18.356415] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec > (nowayout=0) > [ 18.566481] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) > [ 18.651229] mc: Linux media interface: v0.10 > [ 18.719862] AVX2 version of gcm_enc/dec engaged. > [ 18.720960] AES CTR mode by8 optimization enabled > [ 18.954693] videodev: Linux video capture interface: v2.00 > [ 19.230587] cfg80211: Loading compiled-in X.509 certificates for > regulatory database > [ 19.231555] cfg80211: Loaded X.509 cert 'b...@debian.org: > 577e021cb980e0e820821ba7b54b4961b8b4fadf' > [ 19.232466] cfg80211: Loaded X.509 cert 'romain.per...@gmail.com: > 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' > [ 19.233372] cfg80211: Loaded X.509 cert 'sforshee: > 00b28ddf47aef9cea7' > [ 19.234277] cfg80211: Loaded X.509 cert 'wens: > 61c038651aabdcf94bd0ac7ff06c7248db18c600' > [ 19.599445] Bluetooth: Core ver 2.22 > [ 19.600150] NET: Registered PF_BLUETOOTH protocol family > [ 19.600795] Bluetooth: HCI device and connection manager initialized > [ 19.601408] Bluetooth: HCI socket layer initialized > [ 19.601994] Bluetooth: L2CAP socket layer initialized > [ 19.602564] Bluetooth: SCO socket layer initialized > [ 20.010972] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops > i915_audio_component_bind_ops [i915]) > [ 20.181082] platform regulatory.0: firmware: direct-loading firmware > regulatory.db > [ 20.233544] platform regulatory.0: firmware: direct-loading firmware > regulatory.db.p7s > [ 20.294854] input: HDA Intel HDMI HDMI/DP,pcm=3 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input16 > [ 20.295621] input: HDA Intel HDMI HDMI/DP,pcm=7 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input17 > [ 20.296330] input: HDA Intel HDMI HDMI/DP,pcm=8 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input18 > [ 20.596674] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: > line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker > [ 20.597358] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 > (0x0/0x0/0x0/0x0/0x0) > [ 20.597982] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 > (0x21/0x0/0x0/0x0/0x0) > [ 20.598714] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > [ 20.599306] snd_hda_codec_realtek hdaudioC1D0: inputs: > [ 20.599882] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12 > [ 20.652361] input: HDA Intel PCH Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input19 > [ 20.657099] usb 2-7: Found UVC 1.00 device HD WebCam (1bcf:2c6e) > [ 20.691855] input: HD WebCam: HD WebCam as > /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input20 > [ 20.692629] usbcore: registered new interface driver uvcvideo > [ 20.913049] usbcore: registered new interface driver btusb > [ 20.914609] Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b > lmp_ver=06 lmp_subver=8723 > [ 20.917590] Bluetooth: hci0: RTL: rom_version status=0 version=1 > [ 20.918456] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_fw.bin > [ 20.968785] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin > [ 20.974034] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' > [ 20.974853] rtlwifi: rtlwifi: wireless switch is on > [ 21.097743] bluetooth hci0: firmware: direct-loading firmware > rtl_bt/rtl8723b_fw.bin > [ 21.099398] Bluetooth: hci0: RTL: loading rtl_bt/rtl8723b_config.bin > [ 21.101131] bluetooth hci0: firmware: failed to load > rtl_bt/rtl8723b_config.bin (-2) > [ 21.102822] firmware_class: See https://wiki.debian.org/Firmware for > information about missing firmware > [ 21.104565] bluetooth hci0: firmware: failed to load > rtl_bt/rtl8723b_config.bin (-2) > [ 21.106267] bluetooth hci0: Direct firmware load for > rtl_bt/rtl8723b_config.bin failed with error -2 > [ 21.107870] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 > [ 21.129225] rtl8723be 0000:05:00.0: firmware: direct-loading firmware > rtlwifi/rtl8723befw_36.bin > [ 21.203008] rtl8723be 0000:05:00.0 wlp5s0: renamed from wlan0 > [ 21.684174] intel_rapl_common: Found RAPL domain package > [ 21.685826] intel_rapl_common: Found RAPL domain core > [ 21.687434] intel_rapl_common: Found RAPL domain uncore > [ 21.688998] intel_rapl_common: Found RAPL domain dram > [ 21.690523] intel_rapl_common: RAPL package-0 domain package locked > by BIOS > [ 21.911676] Bluetooth: hci0: RTL: fw version 0x0e2f9f73 > [ 22.043986] Adding 999420k swap on /dev/sda5. Priority:-2 extents:1 > across:999420k FS > [ 25.400821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 25.401908] Bluetooth: BNEP filters: protocol multicast > [ 25.403006] Bluetooth: BNEP socket layer initialized > [ 25.407451] Bluetooth: MGMT ver 1.22 > [ 25.521250] NET: Registered PF_ALG protocol family > [ 31.901411] NET: Registered PF_QIPCRTR protocol family > [ 32.352114] kauditd_printk_skb: 11 callbacks suppressed > [ 32.352124] audit: type=1400 audit(1742504543.912:23): > apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=663 > comm="cupsd" capability=12 capname="net_admin" > [ 33.123925] r8169 0000:04:00.0: firmware: direct-loading firmware > rtl_nic/rtl8168g-2.fw > [ 33.150979] Generic FE-GE Realtek PHY r8169-0-400:00: attached PHY > driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC) > [ 33.355026] r8169 0000:04:00.0 enp4s0: Link is Down > [ 37.667962] wlp5s0: authenticate with f0:b0:14:be:5e:31 > [ 37.667981] wlp5s0: 80 MHz not supported, disabling VHT > [ 37.678041] wlp5s0: send auth to f0:b0:14:be:5e:31 (try 1/3) > [ 37.686097] wlp5s0: authenticated > [ 37.686913] wlp5s0: associate with f0:b0:14:be:5e:31 (try 1/3) > [ 37.696820] wlp5s0: RX AssocResp from f0:b0:14:be:5e:31 (capab=0x1431 > status=0 aid=8) > [ 37.697043] wlp5s0: associated > [ 37.708580] wlp5s0: Limiting TX power to 20 (20 - 0) dBm as > advertised by f0:b0:14:be:5e:31 > [ 37.831118] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready > > # journalctl -o short-precise -k -b -1 > ...provides the output of the last successful boot process using the > same kernel version. journalctl --list-boot indicates nothing is logged > when I try failing versions. > Thus, I am having trouble getting a log from a failed boot with > kernel 6.1.0-28 (or higher). > > Now, I am trying to find clues looking at a video I recorded while > booting version -28. It would be actually good if we have as well log from the first failing one. The mentioned netconsole is a possiblity to get that, or at least an attempt to do it. Do you have another device so that you could use the netconsole approach to log over the network to this secondary device? https://www.kernel.org/doc/html/latest/networking/netconsole.html#netconsole You will need to pass it as parameter to the kernel (you can do that in advance from a working kernel by expanding GRUB_CMDLINE_LINUX for the grub config, update grub config, then reboot into the "failing" kernel. I agree it's not always the easist thing to implement. Here some input which might help. Create a /etc/default/grub.d/netconsole.cfg with GRUB_CMDLINE_LINUX="$GRUB_CMDLINE_LINUX netconsole=+@sourceip/interfacename,@targetip/aa:bb:cc:dd:ee:ff" chosing the source ip from your client, the interface name on which you configure the ip, the target ip your other device in the network and the MAC address. Now run update-grub2 to update the grub configuration. Btw, make sure you have not the quiet kernel parameter set, otherwise rmeove it as well (either manually on booting the entry or check the GRUB_CMDLINE_LINUX_DEFAULT setting in /etc/default/grub (on changes run update-grub2). On the target system either use nc -u -l -p 6666 or socat udp-recv:6666 - to start listening on UDP port 6666 before you boot the problematic client. Regards, Salvatore
