Package: k3b Version: 0.12.15-2 On startup, k3b resets my CD drives, and does not detect them.
I'm not sure why the reset is happening. I can't imagine any reason why you would be doing this on purpose, so maybe it is a bug? Anyway, when the reset occurs, this appears in the "dmesg" output: (scsi0:A:2:0): No or incomplete CDB sent to device. scsi0: Issued Channel A Bus Reset. 1 SCBs aborted As for the device detection problems, I have a theory which may absolve k3b: http://bugs.debian.org/370603 http://bugs.debian.org/370605 Let me know if I can help. Thanks -- graham ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 16 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 <Adaptec 29160N Ultra160 SCSI adapter> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Vendor: SEAGATE Model: ST336607LW Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 128 target0:0:0: Beginning Domain Validation target0:0:0: wide asynchronous target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target0:0:0: Ending Domain Validation Vendor: PIONEER Model: DVD-ROM DVD-303R Rev: 2.00 Type: CD-ROM ANSI SCSI revision: 02 target0:0:2: Beginning Domain Validation target0:0:2: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 8) target0:0:2: Domain Validation skipping write tests target0:0:2: Ending Domain Validation Vendor: YAMAHA Model: CRW3200S Rev: 1.0d Type: CD-ROM ANSI SCSI revision: 02 target0:0:6: Beginning Domain Validation target0:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15) target0:0:6: Domain Validation skipping write tests target0:0:6: Ending Domain Validation SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) sda: Write Protect is off sda: Mode Sense: ab 00 10 08 SCSI device sda: drive cache: write back w/ FUA SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB) sda: Write Protect is off sda: Mode Sense: ab 00 10 08 SCSI device sda: drive cache: write back w/ FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: Attached scsi disk sda -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
