Package: installation-reports Debian-installer-version: p.d.o/~jbailey/ from 2005-02-25 uname -a: Linux celebdil 2.6.8-2-32-smp #1 SMP Mon Feb 7 22:19:10 EST 2005 parisc GNU/Linux Date: Sat Feb 26 00:57:32 EST 2005 Method: Net Install via Daily Build http://people.debian.org/~jbailey/d-i/hppa/2005-02-25/netboot/2.6/boot.img
Machine: HP Visualize C3000 Processor: PA8500 400MHz Memory: 2GB Root Device: /dev/sda Root Size/partition table: Device Boot Start End Blocks Id System /dev/sda1 * 1 48 49136 f0 Linux/PA-RISC boot /dev/sda2 49 292 249856 82 Linux swap /dev/sda3 293 780 499712 83 Linux (/) /dev/sda4 781 8678 8087552 5 Extended /dev/sda5 781 1734 976880 83 Linux (/var) /dev/sda6 1735 3641 1952752 83 Linux (/usr) /dev/sda7 3642 8678 5157872 83 Linux (/home) Output of lspci and lspci -n: % lspci 0000:00:0c.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) 0000:00:0d.0 Multimedia audio controller: Analog Devices AD1889 sound chip 0000:00:0e.0 IDE interface: National Semiconductor Corporation 87415/87560 IDE (rev 03) 0000:00:0e.1 Bridge: National Semiconductor Corporation 87560 Legacy I/O (rev 01) 0000:00:0e.2 USB Controller: National Semiconductor Corporation USB Controller (rev 02) 0000:00:0f.0 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 04) 0000:00:0f.1 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 04) 0000:01:04.0 Display controller: Hewlett-Packard Company A4977A Visualize EG (rev 03) 0000:02:01.0 Fibre Channel: Hewlett-Packard Company Tach XL2 Fibre Channel Host Adapter (rev 0b) 0000:03:02.0 Display controller: Hewlett-Packard Company Visualize FX4 (rev 02) % lspci -n 0000:00:0c.0 0200: 1011:0019 (rev 41) 0000:00:0d.0 0401: 11d4:1889 0000:00:0e.0 0101: 100b:0002 (rev 03) 0000:00:0e.1 0680: 100b:000e (rev 01) 0000:00:0e.2 0c03: 100b:0012 (rev 02) 0000:00:0f.0 0100: 1000:000b (rev 04) 0000:00:0f.1 0100: 1000:000b (rev 04) 0000:01:04.0 0380: 103c:1005 (rev 03) 0000:02:01.0 0c04: 103c:1029 (rev 0b) 0000:03:02.0 0380: 103c:1008 (rev 02) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: The purpose behind this was to test Debian Installer with the new 2.6.8-2 kernels. Everything seemed to go quite well. Will hopefully get a chance to test a CD boot soon. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
