Package: src:linux Version: 5.17.6-1+b1 Severity: normal Dear Maintainer,
I have a Debian Sid box running some KVM/QEMU guests and ever since the upgrade to 5.17 it is kernel panicing fairly reliably whenever I reboot the guest VMs on it. This is happening under both 5.17.3 and 5.17.6. [420450.562966] BUG: kernel NULL pointer dereference, address: 000000000000000b [420450.586155] #PF: supervisor write access in kernel mode [420450.603615] #PF: error_code(0x0002) - not-present page [420450.620787] PGD 0 P4D 0 [420450.629381] Oops: 0002 [#1] PREEMPT SMP PTI [420450.643410] CPU: 23 PID: 93711 Comm: qemu-system-x86 Kdump: loaded Not tainted 5.17.0-2-amd64 #1 Debian 5.17.6-1 [420450.677460] Hardware name: Intel Corporation T5520UR/T5520UR, BIOS S5500.86B.01.00.0061.030920121535 03/09/2012 [420450.710936] RIP: 0010:kvm_replace_memslot+0xcf/0x390 [kvm] [420450.729338] Code: 44 24 08 48 85 db 0f 84 3b 02 00 00 48 89 ea 48 c1 e2 04 48 01 da 48 8b 4a 08 48 85 c9 74 1e 48 8b 32 48 89 31 48 85 f6 74 04 <48> 89 4e 08 48 c7 02 00 00 00 00 48 c7 42 08 00 00 00 00 48 8d 54 [420450.791413] RSP: 0018:ffffad89c683fd70 EFLAGS: 00010206 [420450.808873] RAX: ffffad89c6a19058 RBX: ffff8b77f553b400 RCX: ffffad89c6a19110 [420450.832622] RDX: ffff8b77f553b400 RSI: 0000000000000003 RDI: ffffad89c6a19000 [420450.856371] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [420450.880122] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8b77f553b200 [420450.903874] R13: 0000000000000000 R14: 0000000000000000 R15: ffffad89c6a19000 [420450.927626] FS: 00007f46eff3c640(0000) GS:ffff8b7dd7cc0000(0000) knlGS:0000000000000000 [420450.954525] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420450.973699] CR2: 000000000000000b CR3: 00000001085ea005 CR4: 00000000000226e0 [420450.997452] Call Trace: [420451.005762] <TASK> [420451.012925] ? kmem_cache_alloc_trace+0x175/0x3e0 [420451.028676] kvm_set_memslot+0x2fe/0x490 [kvm] [420451.043622] kvm_vm_ioctl+0x2cb/0xd80 [kvm] [420451.057714] ? handle_mm_fault+0xb2/0x280 [420451.071175] __x64_sys_ioctl+0x82/0xb0 [420451.083775] do_syscall_64+0x3b/0xc0 [420451.095805] entry_SYSCALL_64_after_hwframe+0x44/0xae [420451.112696] RIP: 0033:0x7f46f6b13397 [420451.124723] Code: 3c 1c e8 1c ff ff ff 85 c0 79 87 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a9 da 0d 00 f7 d8 64 89 01 48 [420451.186798] RSP: 002b:00007f46eff3af68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [420451.211981] RAX: ffffffffffffffda RBX: 000000004020ae46 RCX: 00007f46f6b13397 [420451.235732] RDX: 00007f46eff3b030 RSI: 000000004020ae46 RDI: 000000000000000c [420451.259482] RBP: 000055b038bce1f0 R08: 0000000000000000 R09: 00000000000c0000 [420451.283234] R10: 00000000000c0000 R11: 0000000000000246 R12: 00007f46eff3b030 [420451.306984] R13: 000000007ff40000 R14: 000055b038b69460 R15: 00000000000c0000 [420451.330738] </TASK> [420451.338184] Modules linked in: cpuid rpcsec_gss_krb5 nfsv4 dns_resolver nf_conntrack_netlink xfrm_user xfrm_algo br_netfilter bridge stp llc overlay autofs4 ip6_tables ip6t_rpfilter nft_chain_nat xt_MASQUERADE nf_nat xt_addrtype ip_tables xt_state xt_conntrack ipt_REJECT nf_reject_ipv4 nf_conntrack_tftp nf_conntrack_ftp xt_tcpudp ipt_rpfilter xt_CT nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables x_tables nfnetlink nfsd auth_rpcgss nfs_acl nfs lockd grace fscache netfs sunrpc jc42 vhost_vsock vmw_vsock_virtio_transport_common vsock vhost_net tun vhost vhost_iotlb tap ipmi_watchdog nbd squashfs loop dm_crypt dm_mod intel_powerclamp coretemp ipmi_ssif kvm_intel kvm irqbypass ghash_clmulni_intel mgag200 drm_shmem_helper drm_kms_helper aesni_intel cec crypto_simd rc_core cryptd acpi_ipmi iTCO_wdt intel_pmc_bxt intel_cstate ipmi_si drm iTCO_vendor_support evdev sg intel_uncore ipmi_devintf watchdog ioatdma i7core_edac i5500_temp ipmi_msghandler button acpi_cpufreq xfs [420451.338279] libcrc32c crc32c_generic hid_generic usbhid hid uas ata_generic usb_storage ses sd_mod enclosure t10_pi scsi_transport_sas crc_t10dif ata_piix crct10dif_generic uhci_hcd ehci_pci libata igb megaraid_sas ehci_hcd i2c_algo_bit crct10dif_pclmul dca crct10dif_common i2c_i801 usbcore scsi_mod ptp crc32_pclmul crc32c_intel i2c_smbus lpc_ich scsi_common usb_common pps_core [420451.734448] CR2: 000000000000000b -- Package-specific info: ** Version: Linux version 5.17.0-2-amd64 (debian-ker...@lists.debian.org) (gcc-11 (Debian 11.3.0-1) 11.3.0, GNU ld (GNU Binutils for Debian) 2.38) #1 SMP PREEMPT Debian 5.17.6-1 (2022-05-14) ** Command line: BOOT_IMAGE=/boot/vmlinuz-5.17.0-2-amd64 root=/dev/sda1 ro console=ttyS0,38400n8 UUID=43a6b5ff-7af0-440e-9a9c-3c3a5a6d96fc lockdown=integrity crashkernel=384M ** Not tainted ** Kernel log: [ 16.398935] sd 5:0:0:0: [sdb] Attached SCSI disk [ 20.784872] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 20.815021] XFS (sda1): Mounting V5 Filesystem [ 20.857819] XFS (sda1): Ending clean mount [ 20.923094] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 21.216157] pstore: crypto_comp_decompress failed, ret = -22! [ 21.240145] pstore: crypto_comp_decompress failed, ret = -22! [ 21.636592] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 21.675493] IPMI message handler: version 39.2 [ 21.677308] ACPI: button: Sleep Button [SLPB] [ 21.706917] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 21.731323] ACPI: button: Power Button [PWRF] [ 21.746573] ses 0:0:6:0: Attached scsi generic sg0 type 13 [ 21.747183] EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:fe:03.0 (INTERRUPT) [ 21.764754] sd 0:2:0:0: Attached scsi generic sg1 type 0 [ 21.799009] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED) [ 21.816550] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 21.852387] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT) [ 21.904024] EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED) [ 21.939815] EDAC i7core: Driver loaded, 2 memory controller(s) found. [ 21.962356] ipmi device interface [ 21.973527] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 22.007805] igb 0000:01:00.0: DCA enabled [ 22.021073] igb 0000:01:00.1: DCA enabled [ 22.035045] iTCO_vendor_support: vendor-support=0 [ 22.049641] igb 0000:05:00.0: DCA enabled [ 22.063723] igb 0000:05:00.1: DCA enabled [ 22.093633] igb 0000:05:00.2: DCA enabled [ 22.106855] igb 0000:05:00.3: DCA enabled [ 22.128296] ipmi_si: IPMI System Interface driver [ 22.128686] random: crng init done [ 22.143802] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 22.175837] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 22.175841] ipmi_si: Adding SMBIOS-specified kcs state machine [ 22.175936] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 22.238381] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 22.240812] ACPI: bus type drm_connector registered [ 22.283357] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 22.314557] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 22.343183] ipmi_si: Adding ACPI-specified kcs state machine [ 22.343262] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 22.433518] cryptd: max_cpu_qlen set to 1000 [ 22.478336] SSE version of gcm_enc/dec engaged. [ 22.505414] mgag200 0000:0e:00.0: vgaarb: deactivate vga console [ 22.526435] Console: switching to colour dummy device 80x25 [ 22.548948] [drm] Initialized mgag200 1.0.0 20110418 for 0000:0e:00.0 on minor 0 [ 22.575344] fbcon: mgag200drmfb (fb0) is primary device [ 22.577480] mgag200 0000:0e:00.0: [drm] drm_plane_enable_fb_damage_clips() not called [ 22.690003] Console: switching to colour frame buffer device 128x48 [ 22.737791] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x000157, prod_id: 0x003e, dev_id: 0x21) [ 22.747186] mgag200 0000:0e:00.0: [drm] fb0: mgag200drmfb frame buffer device [ 23.107278] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 23.143039] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 23.242628] ipmi_ssif: IPMI SSIF Interface driver [ 24.142760] xfs filesystem being remounted at / supports timestamps until 2038 (0x7fffffff) [ 24.388329] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 24.428443] device-mapper: uevent: version 1.0.3 [ 24.443885] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-de...@redhat.com [ 24.820468] loop: module loaded [ 24.840711] XFS (sda2): Mounting V5 Filesystem [ 24.857033] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 24.916979] IPMI Watchdog: driver initialized [ 24.963223] tun: Universal TUN/TAP device driver, 1.6 [ 24.998627] NET: Registered PF_VSOCK protocol family [ 25.058469] XFS (sda2): Starting recovery (logdev: internal) [ 25.105873] XFS (sda2): Ending recovery (logdev: internal) [ 25.127971] xfs filesystem being mounted at /var supports timestamps until 2038 (0x7fffffff) [ 25.157956] XFS (sda4): Mounting V5 Filesystem [ 25.205058] XFS (sda4): Starting recovery (logdev: internal) [ 25.241673] XFS (sda4): Ending recovery (logdev: internal) [ 25.264553] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff) [ 25.335482] Adding 5119996k swap on /dev/mapper/swap. Priority:-2 extents:1 across:5119996k FS [ 25.493591] audit: type=1400 audit(1652805030.795:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="klogd" pid=1453 comm="apparmor_parser" [ 25.541755] audit: type=1400 audit(1652805030.795:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1450 comm="apparmor_parser" [ 25.596945] audit: type=1400 audit(1652805030.795:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1450 comm="apparmor_parser" [ 25.653861] audit: type=1400 audit(1652805030.795:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1449 comm="apparmor_parser" [ 25.703395] audit: type=1400 audit(1652805030.795:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1457 comm="apparmor_parser" [ 25.753229] audit: type=1400 audit(1652805030.795:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1457 comm="apparmor_parser" [ 25.802478] audit: type=1400 audit(1652805030.795:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1457 comm="apparmor_parser" [ 25.851461] audit: type=1400 audit(1652805030.799:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/inspircd" pid=1466 comm="apparmor_parser" [ 25.903005] audit: type=1400 audit(1652805030.803:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="avahi-daemon" pid=1463 comm="apparmor_parser" [ 25.953117] audit: type=1400 audit(1652805030.803:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nscd" pid=1470 comm="apparmor_parser" [ 28.849797] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 28.880942] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.013043] RPC: Registered named UNIX socket transport module. [ 31.032520] RPC: Registered udp transport module. [ 31.047985] RPC: Registered tcp transport module. [ 31.063446] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 31.148517] FS-Cache: Loaded [ 31.439769] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 34.223260] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 34.271988] Bridge firewalling registered [ 34.359008] Initializing XFRM netlink socket [ 544.585780] L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. [ 860.962526] Lockdown: crash: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 902.462769] Lockdown: crash: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 1549.037491] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500 [ 1893.309440] perf: interrupt took too long (3160 > 3140), lowering kernel.perf_event_max_sample_rate to 63250 [ 2415.097971] Lockdown: crash: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [10395.035861] perf: interrupt took too long (3957 > 3950), lowering kernel.perf_event_max_sample_rate to 50500 ** Model information sys_vendor: Intel Corporation product_name: T5520UR product_version: .................... chassis_vendor: NSN2U chassis_version: APS2100 bios_vendor: Intel Corp. bios_version: S5500.86B.01.00.0061.030920121535 board_vendor: Intel Corporation board_name: T5520UR board_version: E24717-751 ** Loaded modules: nf_conntrack_netlink xfrm_user xfrm_algo br_netfilter bridge stp llc overlay autofs4 ip6_tables ip6t_rpfilter nft_chain_nat xt_MASQUERADE nf_nat xt_addrtype ip_tables xt_state xt_conntrack ipt_REJECT nf_reject_ipv4 nf_conntrack_tftp nf_conntrack_ftp xt_tcpudp ipt_rpfilter xt_CT nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables x_tables nfnetlink nfsd auth_rpcgss nfs_acl nfs lockd grace fscache netfs sunrpc jc42 vhost_vsock vmw_vsock_virtio_transport_common vsock vhost_net tun vhost vhost_iotlb tap ipmi_watchdog nbd squashfs loop dm_crypt dm_mod intel_powerclamp coretemp ipmi_ssif kvm_intel kvm irqbypass ghash_clmulni_intel mgag200 drm_shmem_helper aesni_intel drm_kms_helper crypto_simd cec cryptd rc_core iTCO_wdt acpi_ipmi intel_cstate intel_pmc_bxt ipmi_si iTCO_vendor_support evdev drm ipmi_devintf intel_uncore watchdog ioatdma sg i7core_edac i5500_temp ipmi_msghandler button acpi_cpufreq xfs libcrc32c crc32c_generic hid_generic usbhid hid uas usb_storage sd_mod ses t10_pi enclosure crc_t10dif ata_generic scsi_transport_sas crct10dif_generic ata_piix igb uhci_hcd ehci_pci i2c_algo_bit megaraid_sas libata ehci_hcd dca crct10dif_pclmul crct10dif_common i2c_i801 ptp usbcore scsi_mod crc32_pclmul crc32c_intel lpc_ich i2c_smbus scsi_common usb_common pps_core ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) Subsystem: Intel Corporation 5520 I/O Hub to ESI Port [8086:34de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 25 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff [size=4K] Memory behind bridge: b1d00000-b1dfffff [size=1M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 27 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:05.0 PCI bridge [0604]: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 [8086:340c] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Bus: primary=00, secondary=03, subordinate=06, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: b1a00000-b1cfffff [size=3M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Bus: primary=00, secondary=07, subordinate=0a, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 9 [8086:3410] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 33 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0a.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 10 [8086:3411] (rev 22) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 35 Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:10.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Physical and Link Layer Registers Port 0 [8086:3425] (rev 22) (prog-if 00 [8259]) Subsystem: Device [0086:00de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:10.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Routing and Protocol Layer Registers Port 0 [8086:3426] (rev 22) (prog-if 00 [8259]) Subsystem: Device [0086:00de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:11.0 PIC [0800]: Intel Corporation 7500/5520/5500 Physical and Link Layer Registers Port 1 [8086:3427] (rev 22) (prog-if 00 [8259]) Subsystem: Device [0086:00de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:11.1 PIC [0800]: Intel Corporation 7500/5520/5500 Routing & Protocol Layer Register Port 1 [8086:3428] (rev 22) (prog-if 00 [8259]) Subsystem: Device [0086:00de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:13.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller [8086:342d] (rev 22) (prog-if 20 [IO(X)-APIC]) Subsystem: Device [0086:00de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at b1e23000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 22) (prog-if 00 [8259]) Subsystem: Device [0086:00de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: i7core_edac Kernel modules: i7core_edac 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 22) (prog-if 00 [8259]) Subsystem: Device [0086:00de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 22) (prog-if 00 [8259]) Subsystem: Device [0086:00de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 22) (prog-if 00 [8259]) Subsystem: Device [0086:00de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: i5500_temp Kernel modules: i5500_temp 00:15.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 Trusted Execution Technology Registers [8086:342f] (rev 22) (prog-if 20 [IO(X)-APIC]) Subsystem: Device [0086:00de] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:16.0 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3430] (rev 22) Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 101 Region 0: Memory at b1e00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ioatdma Kernel modules: ioatdma 00:16.1 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3431] (rev 22) Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 103 Region 0: Memory at b1e04000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ioatdma Kernel modules: ioatdma 00:16.2 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3432] (rev 22) Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 105 Region 0: Memory at b1e08000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ioatdma Kernel modules: ioatdma 00:16.3 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3433] (rev 22) Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 107 Region 0: Memory at b1e0c000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ioatdma Kernel modules: ioatdma 00:16.4 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:3429] (rev 22) Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 101 Region 0: Memory at b1e10000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ioatdma Kernel modules: ioatdma 00:16.5 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:342a] (rev 22) Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 103 Region 0: Memory at b1e14000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ioatdma Kernel modules: ioatdma 00:16.6 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:342b] (rev 22) Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 105 Region 0: Memory at b1e18000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ioatdma Kernel modules: ioatdma 00:16.7 System peripheral [0880]: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:342c] (rev 22) Subsystem: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 107 Region 0: Memory at b1e1c000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ioatdma Kernel modules: ioatdma 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller [8086:34de] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 30c0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller [8086:34de] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 30a0 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller [8086:34de] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 3080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at b1e21000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 36 Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 I/O behind bridge: 00001000-00001fff [size=4K] Memory behind bridge: b1900000-b19fffff [size=1M] Prefetchable memory behind bridge: 00000000b1f00000-00000000b20fffff [size=2M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 37 Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0 I/O behind bridge: 00004000-00004fff [size=4K] Memory behind bridge: b1000000-b18fffff [size=9M] Prefetchable memory behind bridge: 00000000b0000000-00000000b0ffffff [size=16M] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller [8086:34de] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 3060 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller [8086:34de] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 3040 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller [8086:34de] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at 3020 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller [8086:34de] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 0: Memory at b1e20000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=32 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+ Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:34de] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering]) Subsystem: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller [8086:34de] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 3138 [size=8] Region 1: I/O ports at 314c [size=4] Region 2: I/O ports at 3130 [size=8] Region 3: I/O ports at 3148 [size=4] Region 4: I/O ports at 3110 [size=16] Region 5: I/O ports at 3100 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:34de] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 18 Region 0: Memory at b1e22000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3000 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c_i801 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [PCI native mode-only controller, supports bus mastering]) Subsystem: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller [8086:34de] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 21 Region 0: I/O ports at 3128 [size=8] Region 1: I/O ports at 3144 [size=4] Region 2: I/O ports at 3120 [size=8] Region 3: I/O ports at 3140 [size=4] Region 4: I/O ports at 30f0 [size=16] Region 5: I/O ports at 30e0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 01:00.0 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02) Subsystem: Intel Corporation 82575EB Gigabit Network Connection [8086:34de] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 43 Region 0: Memory at b1d20000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2020 [size=32] Region 3: Memory at b1d44000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 01:00.1 Ethernet controller [0200]: Intel Corporation 82575EB Gigabit Network Connection [8086:10a7] (rev 02) Subsystem: Intel Corporation 82575EB Gigabit Network Connection [8086:34de] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 24 Region 0: Memory at b1d00000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Region 3: Memory at b1d40000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 03:00.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2 Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=03, secondary=04, subordinate=06, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: b1a00000-b1cfffff [size=3M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 04:02.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2 Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 38 Bus: primary=04, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: b1a00000-b1cfffff [size=3M] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 04:04.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2 Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 39 Bus: primary=04, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 05:00.0 Ethernet controller [0200]: Intel Corporation 82580 Gigabit Network Connection [8086:150e] (rev 01) Subsystem: Silicom Ltd. 82580 Gigabit Network Connection [1374:0380] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 62 Region 0: Memory at b1b80000 (32-bit, non-prefetchable) [size=512K] Region 3: Memory at b1c0c000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 05:00.1 Ethernet controller [0200]: Intel Corporation 82580 Gigabit Network Connection [8086:150e] (rev 01) Subsystem: Silicom Ltd. 82580 Gigabit Network Connection [1374:0380] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 72 Region 0: Memory at b1b00000 (32-bit, non-prefetchable) [size=512K] Region 3: Memory at b1c08000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 05:00.2 Ethernet controller [0200]: Intel Corporation 82580 Gigabit Network Connection [8086:150e] (rev 01) Subsystem: Silicom Ltd. 82580 Gigabit Network Connection [1374:0380] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 28 Region 0: Memory at b1a80000 (32-bit, non-prefetchable) [size=512K] Region 3: Memory at b1c04000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 05:00.3 Ethernet controller [0200]: Intel Corporation 82580 Gigabit Network Connection [8086:150e] (rev 01) Subsystem: Silicom Ltd. 82580 Gigabit Network Connection [1374:0380] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 91 Region 0: Memory at b1a00000 (32-bit, non-prefetchable) [size=512K] Region 3: Memory at b1c00000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb Kernel modules: igb 07:00.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2 Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=07, secondary=08, subordinate=0a, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 08:02.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2 Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 40 Bus: primary=08, secondary=09, subordinate=09, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 08:04.0 PCI bridge [0604]: Microsemi / PMC / IDT PES24T3G2 PCI Express Gen2 Switch [111d:806a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 41 Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=0 I/O behind bridge: [disabled] Memory behind bridge: [disabled] Prefetchable memory behind bridge: [disabled] Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 0d:00.0 RAID bus controller [0104]: Broadcom / LSI MegaRAID SAS 1078 [1000:0060] (rev 04) Subsystem: Intel Corporation MegaRAID SAS 1078 [8086:34e4] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at b1900000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at 1000 [size=256] Region 3: Memory at b1940000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at b1980000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: megaraid_sas Kernel modules: megaraid_sas 0e:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation MGA G200e [Pilot] ServerEngines (SEP1) [8086:0101] Physical Slot: 5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at b0000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at b1800000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at b1000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: mgag200 Kernel modules: mgag200 fe:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers [8086:2c70] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder [8086:2d81] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:2d90] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:2d91] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 0 [8086:2d92] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 0 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 1 [8086:2d93] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 1 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:2d94] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:2d95] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers [8086:2d98] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder [8086:2d99] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers [8086:2d9a] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers [8086:2d9c] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control [8086:2da0] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address [8086:2da1] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank [8086:2da2] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control [8086:2da8] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address [8086:2da9] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank [8086:2daa] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control [8086:2db0] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address [8086:2db1] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank [8086:2db2] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 fe:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers [8086:2c70] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture Generic Non-core Registers [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder [8086:2d81] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QuickPath Architecture System Address Decoder [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:2d90] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QPI Link 0 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:2d91] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 0 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 0 [8086:2d92] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 0 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Mirror Port Link 1 [8086:2d93] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Mirror Port Link 1 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:2d94] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QPI Link 1 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.5 Host bridge [0600]: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:2d95] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series QPI Physical 1 [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers [8086:2d98] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Registers [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder [8086:2d99] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Target Address Decoder [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers [8086:2d9a] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller RAS Registers [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers [8086:2d9c] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Test Registers [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control [8086:2da0] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address [8086:2da1] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Address [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank [8086:2da2] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Rank [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control [8086:2da3] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 0 Thermal Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control [8086:2da8] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address [8086:2da9] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Address [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank [8086:2daa] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Rank [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control [8086:2dab] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 1 Thermal Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control [8086:2db0] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address [8086:2db1] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Address [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank [8086:2db2] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Rank [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control [8086:2db3] (rev 02) Subsystem: Intel Corporation Xeon 5600 Series Integrated Memory Controller Channel 2 Thermal Control [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 004 Device 003: ID 0424:2512 Microchip Technology, Inc. (formerly SMSC) USB 2.0 Hub Bus 004 Device 002: ID 0e39:2a00 Smart Modular Technologies, Inc. eUSB Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: bookworm/sid APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 5.17.0-2-amd64 (SMP w/24 CPU threads; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) LSM: AppArmor: enabled Versions of packages linux-image-5.17.0-2-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.141 ii kmod 29-1+b1 ii linux-base 4.8 Versions of packages linux-image-5.17.0-2-amd64 recommends: ii apparmor 3.0.4-2 ii firmware-linux-free 20200122-1 Versions of packages linux-image-5.17.0-2-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.06-2 pn linux-doc-5.17 <none> Versions of packages linux-image-5.17.0-2-amd64 is related to: ii firmware-amd-graphics 20210818-1 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20210818-1 ii firmware-misc-nonfree 20210818-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
