On Tue, May 02, 2006 at 03:37:05PM +0200, Michael Biebl wrote:
> jacob wrote:
> > Package: powersaved
> > Version: 0.12.11-1
> > Severity: normal
> >
> >
> > powersaved complains that there is no resume= boot option, when I try to
> > suspend to disk. However:
> >
> > (root) /boot$ grep resume= /boot/grub/menu.lst
> > ## e.g. defoptions=vga=791 resume=/dev/hda5
> > # defoptions=resume=/dev/hda2
> > kernel /boot/vmlinuz-2.6.16-dsdt-64m root=/dev/hda1 ro
> > resume=/dev/hda2
> > kernel /boot/vmlinuz-2.6.16-1-k7 root=/dev/hda1 ro
> > resume=/dev/hda2
> > (root) /boot$ cat /proc/cmdline
> > root=/dev/hda1 ro resume=/dev/hda2
> >
> > Setting SUSPEND2DISK_SKIP_RESUME_CHECK to yes, as mentioned in the error
> > message (although not found in /etc/powersave/sleep), corrects the
> > problem.
> >
>
> Hi Jacob,
>
> could you please send me the output from cat /sys/power/resume?
> powersaved uses this method for determining the swap partition as there
> are several ways to specify the default resume partition (kernel config,
> boot pararameter, initrd parameter).
> Please also send me the log file /var/log/suspend2disk.log.
>
$ cat /sys/power/resume
0:0
$ cat /var/log/suspend2disk.log
suspend2disk initiated: 2006-05-02 18:11:26
Debug info follows here, please include in your bug reports. Thanks.
--------------------------------------------------------------------
Loaded modules:
Module Size Used by
ohci_hcd 17348 0
nfs 189068 0
lockd 54248 1 nfs
nfs_acl 3328 1 nfs
sunrpc 133476 3 nfs,lockd,nfs_acl
button 6416 0
ehci_hcd 27016 0
psmouse 34504 0
vmnet 33316 9
parport_pc 31728 0
parport 32008 1 parport_pc
vmmon 102584 0
cpufreq_userspace 3796 0
cpufreq_powersave 1728 0
ipv6 218656 12
thermal 13128 0
fan 4548 0
ac 4676 0
battery 9348 0
ndiswrapper 154956 0
md_mod 64596 0
dm_mod 47924 0
cpufreq_ondemand 5532 1
powernow_k8 9096 0
freq_table 4292 1 powernow_k8
processor 21440 2 thermal,powernow_k8
sisfb 205012 1
usbhid 32416 0
pcmcia 35132 0
firmware_class 9728 1 pcmcia
joydev 8960 0
tsdev 7296 0
snd_intel8x0m 15436 5
snd_intel8x0 29532 0
snd_ac97_codec 82848 2 snd_intel8x0m,snd_intel8x0
snd_ac97_bus 2112 1 snd_ac97_codec
snd_pcm_oss 44128 0
snd_mixer_oss 15744 1 snd_pcm_oss
snd_pcm 74504 6
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 20420 1 snd_pcm
snd 46400 15
snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
serio_raw 6532 0
sis900 20992 0
shpchp 39424 0
pci_hotplug 24308 1 shpchp
ide_cd 35680 0
cdrom 32304 1 ide_cd
pcspkr 3012 0
mii 5248 1 sis900
yenta_socket 23884 1
rsrc_nonstatic 11968 1 yenta_socket
pcmcia_core 37392 3 pcmcia,yenta_socket,rsrc_nonstatic
rtc 11444 0
soundcore 8736 1 snd
snd_page_alloc 9864 3 snd_intel8x0m,snd_intel8x0,snd_pcm
usbcore 111136 5 ohci_hcd,ehci_hcd,ndiswrapper,usbhid
amd64_agp 11652 0
sis_agp 8196 1
agpgart 29296 2 amd64_agp,sis_agp
xfs 487252 2
exportfs 5248 1 xfs
ide_disk 14720 3
generic 4228 0 [permanent]
sis5513 12108 0 [permanent]
ide_core 111536 4 ide_cd,ide_disk,generic,sis5513
evdev 8832 2
mousedev 10496 1
Memory info:
total used free shared buffers cached
Mem: 710696 302760 407936 0 0 228288
-/+ buffers/cache: 74472 636224
Swap: 0 0 0
/proc/cmdline: root=/dev/hda1 ro resume=/dev/hda2
------------------------------------------------------------------------------
========we are going to sleep, preparing.========
running kernel is grub menu entry 0 (vmlinuz-2.6.16-dsdt-64m)
You have set SUSPEND2DISK_RESUME_DEVICE. This is for experts.
activating suspend partition '/dev/hda2'
resume partition is not set up.
Jacob
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
