Package: installation-reports
Boot method: Micro SD cardImage version: firware + partition
https://deb.debian.org/debian/dists/stable/main/installer-armhf/current/images/netboot/SD-card-images/firmware.Cubieboard.img.gz
https://deb.debian.org/debian/dists/stable/main/installer-armhf/current/images/netboot/SD-card-images/partition.img.gzDate:
2021-11-28
Machine: Cubietech Cubieboard1Processor: Allwinner A10Memory: 1GiB
Partitions: Filesystem Type 1K-blocks Used
Available Use% Mounted on tmpfs tmpfs
101392 48 101344 0% /run devtmpfs
devtmpfs 445732 0 445732 0% /dev
Output of lspci -knn (or lspci -nn): (null)
Base System Installation Checklist:[O] = OK, [E] = Error (please elaborate
below), [ ] = didn't try it
Initial boot: [O]Detect network card: [E]Configure network: [
]Detect media: [ ]Load installer modules: [ ]Detect hard drives:
[ ]Partition hard drives: [ ]Install base system: [ ]Clock/timezone setup:
[ ]User/password setup: [ ]Install tasks: [ ]Install boot loader:
[ ]Overall install: [ ]
Comments/Problems:
Screen log shows: no ethernet found. Can not config the network(both
DHCP and manual) to install debian. The network on USB-ethernet adapter is
working. And I'm sure the onboard eth hardware is OK, because it works on the
old system image download from cubietech (wheezy and jessie). Also failed
to install armbian, screen log shows: sun4i-emac 1c0b000.ethernet
eth0: could not find the PHY sun4i-emac 1c0b000.ethernet eth0:
cannot probe MDIO bus
Package: installation-reports
Boot method: Micro SD card
Image version: firware + partition
https://deb.debian.org/debian/dists/stable/main/installer-armhf/current/images/netboot/SD-card-images/firmware.Cubieboard.img.gz
https://deb.debian.org/debian/dists/stable/main/installer-armhf/current/images/netboot/SD-card-images/partition.img.gz
Date: 2021-11-28
Machine: Cubietech Cubieboard1
Processor: Allwinner A10
Memory: 1GiB
Partitions: Filesystem Type 1K-blocks Used
Available Use% Mounted on
tmpfs tmpfs 101392 48 101344
0% /run
devtmpfs devtmpfs 445732 0 445732
0% /dev
Output of lspci -knn (or lspci -nn): (null)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [E]
Configure network: [ ]
Detect media: [ ]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
Screen log shows: no ethernet found.
Can not config the network(both DHCP and manual) to install debian.
The network on USB-ethernet adapter is working. And I'm sure the
onboard eth hardware is OK, because it works on the old system image download
from cubietech (wheezy and jessie).
Also failed to install armbian, screen log shows:
sun4i-emac 1c0b000.ethernet eth0: could not find the PHY
sun4i-emac 1c0b000.ethernet eth0: cannot probe MDIO bus
