Package: src:linux
Version: 5.14.9-2
Severity: important
Dear Maintainer,
I boot this system with the page_poison=1 kernel option and during boot, and
more precisely during SCSI initialization (for external USB disks), I get this
scary error dump:
[ 3.350394] pagealloc: memory corruption
[ 3.350420] (____ptrval____): 00 00 00 04 00 80 83 b0
........
[ 3.350447] CPU: 0 PID: 161 Comm: kworker/u4:5 Not tainted 5.14.0-2-amd64 #1
Debian 5.14.9-2
[ 3.350450] Hardware name: Dell Inc. OptiPlex 7010/0KRC95, BIOS A29
06/28/2018
[ 3.350451] Workqueue: events_unbound async_run_entry_fn
[ 3.350457] Call Trace:
[ 3.350461] dump_stack_lvl+0x46/0x5a
[ 3.350465] __kernel_unpoison_pages.cold+0x49/0x85
[ 3.350470] get_page_from_freelist+0xc61/0xe50
[ 3.350474] ? chacha_block_generic+0x6f/0xb0
[ 3.350476] __alloc_pages+0x178/0x310
[ 3.350479] allocate_slab+0x87/0x490
[ 3.350482] ___slab_alloc+0x3eb/0x570
[ 3.350485] ? scsi_mq_init_request+0x2e/0xe0 [scsi_mod]
[ 3.350497] ? scsi_mq_init_request+0x2e/0xe0 [scsi_mod]
[ 3.350505] __slab_alloc+0x1c/0x40
[ 3.350507] kmem_cache_alloc_node+0x39c/0x3e0
[ 3.350510] scsi_mq_init_request+0x2e/0xe0 [scsi_mod]
[ 3.350518] blk_mq_alloc_rqs+0x20e/0x2a0
[ 3.350522] blk_mq_init_sched+0xa9/0x350
[ 3.350524] elevator_init_mq+0x125/0x160
[ 3.350527] __device_add_disk+0x19e/0x2f0
[ 3.350530] sd_probe+0x2f0/0x4a0 [sd_mod]
[ 3.350533] really_probe+0x1f5/0x3f0
[ 3.350537] __driver_probe_device+0xfe/0x180
[ 3.350539] driver_probe_device+0x1e/0x90
[ 3.350541] __device_attach_driver+0x72/0xe0
[ 3.350543] ? driver_allows_async_probing+0x50/0x50
[ 3.350545] ? driver_allows_async_probing+0x50/0x50
[ 3.350547] bus_for_each_drv+0x7e/0xc0
[ 3.350549] __device_attach_async_helper+0x9f/0xe0
[ 3.350551] async_run_entry_fn+0x30/0x130
[ 3.350554] process_one_work+0x1ec/0x390
[ 3.350556] worker_thread+0x53/0x3e0
[ 3.350558] ? process_one_work+0x390/0x390
[ 3.350559] kthread+0x127/0x150
[ 3.350562] ? set_kthread_struct+0x40/0x40
[ 3.350565] ret_from_fork+0x22/0x30
[ 3.350572] page:(____ptrval____) refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0x1165a0
[ 3.350574] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 3.350577] raw: 0017ffffc0000000 dead000000000100 dead000000000122
0000000000000000
[ 3.350579] raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
[ 3.350579] page dumped because: pagealloc: corrupted page details
Note that this error does not always occur. Sometimes the machine boots with
no error message.
I also attached a full dmesg output.
Thanks !
-- Package-specific info:
** Version:
Linux version 5.14.0-2-amd64 (debian-ker...@lists.debian.org) (gcc-10 (Debian
10.3.0-11) 10.3.0, GNU ld (GNU Binutils for Debian) 2.37) #1 SMP Debian
5.14.9-2 (2021-10-03)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-5.14.0-2-amd64
root=UUID=c27a1c2e-4689-49ec-ab55-bba0dae046dc ro vsyscall=none
security=apparmor page_poison=1 quiet
** Tainted: S (4)
* SMP kernel oops on an officially SMP incapable processor
** Kernel log:
Unable to read kernel log; any relevant messages should be attached
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 7010
product_version: 01
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A29
board_vendor: Dell Inc.
board_name: 0KRC95
board_version: A02
** Loaded modules:
crypto_simd
xts
cts
ecb
tun
mei_hdcp
mei_wdt
cpufreq_conservative
cpufreq_userspace
cpufreq_ondemand
cpufreq_powersave
intel_rapl_msr
intel_rapl_common
x86_pkg_temp_thermal
intel_powerclamp
coretemp
snd_hda_codec_hdmi
kvm_intel
snd_hda_codec_realtek
snd_hda_codec_generic
kvm
ledtrig_audio
rfkill
snd_hda_intel
snd_intel_dspcfg
snd_intel_sdw_acpi
snd_hda_codec
irqbypass
rapl
snd_hda_core
intel_cstate
snd_hwdep
intel_uncore
dell_wmi
snd_pcm_oss
sparse_keymap
serio_raw
pcspkr
snd_mixer_oss
dell_smbios
dcdbas
dell_wmi_descriptor
iTCO_wdt
snd_pcm
intel_pmc_bxt
at24
wmi_bmof
sg
iTCO_vendor_support
snd_timer
watchdog
snd
mei_me
soundcore
mei
evdev
msr
drbd
lru_cache
i2c_dev
binfmt_misc
squashfs
loop
dm_crypt
fuse
configfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
usbhid
hid
btrfs
blake2b_generic
zstd_compress
uas
usb_storage
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid1
raid0
multipath
linear
md_mod
dm_mirror
dm_region_hash
dm_log
dm_mod
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
i915
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ahci
libahci
libata
i2c_algo_bit
ttm
drm_kms_helper
cec
ghash_clmulni_intel
xhci_pci
rc_core
cryptd
xhci_hcd
psmouse
i2c_i801
i2c_smbus
scsi_mod
lpc_ich
ehci_pci
drm
ehci_hcd
e1000e
usbcore
usb_common
ptp
pps_core
wmi
video
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor DRAM Controller [8086:0150] (rev 09)
Subsystem: Dell Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller
[1028:0577]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
Kernel modules: ie31200_edac
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd
Gen Core processor Graphics Controller [8086:0152] (rev 09) (prog-if 00 [VGA
controller])
DeviceName: Onboard IGD
Subsystem: Dell Xeon E3-1200 v2/3rd Gen Core processor Graphics
Controller [1028:0577]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 27
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell 7 Series/C210 Series Chipset Family USB xHCI Host
Controller [1028:0577]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Dell 7 Series/C216 Chipset Family MEI Controller [1028:0577]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7c3c000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network
Connection (Lewisville) [8086:1502] (rev 04)
DeviceName: Onboard LAN
Subsystem: Dell 82579LM Gigabit Network Connection (Lewisville)
[1028:052c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7c39000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family
USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell 7 Series/C216 Chipset Family USB Enhanced Host
Controller [1028:0577]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c38000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family
High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Dell 7 Series/C216 Chipset Family High Definition Audio
Controller [1028:0577]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7c30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family
USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell 7 Series/C216 Chipset Family USB Enhanced Host
Controller [1028:0577]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c37000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation Q77 Express Chipset LPC Controller
[8086:1e47] (rev 04)
Subsystem: Dell Q77 Express Chipset LPC Controller [1028:0577]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset
Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04) (prog-if 01
[AHCI 1.0])
Subsystem: Dell 7 Series/C210 Series Chipset Family 6-port SATA
Controller [AHCI mode] [1028:0577]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 26
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c36000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C216 Chipset Family SMBus
Controller [8086:1e22] (rev 04)
Subsystem: Dell 7 Series/C216 Chipset Family SMBus Controller
[1028:0577]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c35000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
** USB devices:
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
(M-BT58)
Bus 001 Device 003: ID 413c:2107 Dell Computer Corp. KB212-B Quiet Key Keyboard
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 007: ID 0480:a006 Toshiba America Inc External Disk 1.5TB
Bus 003 Device 006: ID 0480:a006 Toshiba America Inc External Disk 1.5TB
Bus 003 Device 005: ID 0480:a006 Toshiba America Inc External Disk 1.5TB
Bus 003 Device 004: ID 0480:a006 Toshiba America Inc External Disk 1.5TB
Bus 003 Device 003: ID 174c:3074 ASMedia Technology Inc. ASM1074 SuperSpeed hub
Bus 003 Device 002: ID 0bc2:331a Seagate RSS LLC Desktop HDD 5TB (ST5000DM000)
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 002: ID 174c:2074 ASMedia Technology Inc. ASM1074 High-Speed hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bookworm/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1,
'experimental-debug'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 5.14.0-2-amd64 (SMP w/2 CPU threads)
Kernel taint flags: TAINT_CPU_OUT_OF_SPEC
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL
set to en_US.UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.14.0-2-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.140
ii kmod 29-1
ii linux-base 4.6
Versions of packages linux-image-5.14.0-2-amd64 recommends:
ii apparmor 3.0.3-2
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.14.0-2-amd64 suggests:
ii debian-kernel-handbook 1.0.19
ii extlinux 3:6.04~git20190206.bf6db5b4+dfsg1-3+b1
ii grub-pc 2.04-20
ii linux-doc-5.14 5.14.9-2
Versions of packages linux-image-5.14.0-2-amd64 is related to:
ii firmware-amd-graphics 20210818-1
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20210818-1
pn firmware-libertas <none>
ii firmware-linux-nonfree 20210818-1
ii firmware-misc-nonfree 20210818-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
ii xen-hypervisor-4.14-amd64 [xen-hypervisor] 4.14.3-1
-- no debconf information
--
Laurent.[ 0.000000] microcode: microcode updated early to revision 0x21, date =
2019-02-13
[ 0.000000] Linux version 5.14.0-2-amd64 (debian-ker...@lists.debian.org)
(gcc-10 (Debian 10.3.0-11) 10.3.0, GNU ld (GNU Binutils for Debian) 2.37) #1
SMP Debian 5.14.9-2 (2021-10-03)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-2-amd64
root=UUID=c27a1c2e-4689-49ec-ab55-bba0dae046dc ro vsyscall=none
security=apparmor page_poison=1 quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes,
using 'standard' format.
[ 0.000000] signal: max sigframe size: 1776
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d159bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d159c000-0x00000000d15defff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d15df000-0x00000000d6f09fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d6f0a000-0x00000000d6ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d7000000-0x00000000d7755fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7756000-0x00000000d77fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d7800000-0x00000000d7fb3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7fb4000-0x00000000d7ffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d971dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d971e000-0x00000000d97fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d9800000-0x00000000dae00fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dae01000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 7010/0KRC95, BIOS A29 06/28/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3292.464 MHz processor
[ 0.000712] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000714] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000721] last_pfn = 0x11e600 max_arch_pfn = 0x400000000
[ 0.000800] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001295] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[ 0.001301] last_pfn = 0xdae01 max_arch_pfn = 0x400000000
[ 0.009422] found SMP MP-table at [mem 0x000fd9a0-0x000fd9af]
[ 0.010782] RAMDISK: [mem 0x2d60b000-0x32afcfff]
[ 0.010786] ACPI: Early table checksum verification disabled
[ 0.010789] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL )
[ 0.010792] ACPI: XSDT 0x00000000D7FF4078 00006C (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.010797] ACPI: FACP 0x00000000D7FFE248 00010C (v05 DELL CBX3
01072009 AMI 00010013)
[ 0.010801] ACPI: DSDT 0x00000000D7FF4170 00A0D6 (v02 DELL CBX3
00000022 INTL 20091112)
[ 0.010804] ACPI: FACS 0x00000000D97FE080 000040
[ 0.010807] ACPI: APIC 0x00000000D7FFE358 000062 (v03 DELL CBX3
01072009 AMI 00010013)
[ 0.010809] ACPI: FPDT 0x00000000D7FFE3C0 000044 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.010812] ACPI: MCFG 0x00000000D7FFE408 00003C (v01 DELL CBX3
01072009 MSFT 00000097)
[ 0.010815] ACPI: HPET 0x00000000D7FFE448 000038 (v01 DELL CBX3
01072009 AMI. 00000005)
[ 0.010818] ACPI: SSDT 0x00000000D7FFE480 000415 (v01 SataRe SataTabl
00001000 INTL 20091112)
[ 0.010820] ACPI: SSDT 0x00000000D7FFE898 0009B9 (v01 PmRef Cpu0Ist
00003000 INTL 20051117)
[ 0.010823] ACPI: SSDT 0x00000000D7FFF258 000B22 (v01 PmRef CpuPm
00003000 INTL 20051117)
[ 0.010826] ACPI: ASF! 0x00000000D7FFFD80 0000A5 (v32 INTEL HCG
00000001 TFSM 000F4240)
[ 0.010828] ACPI: Reserving FACP table memory at [mem 0xd7ffe248-0xd7ffe353]
[ 0.010829] ACPI: Reserving DSDT table memory at [mem 0xd7ff4170-0xd7ffe245]
[ 0.010830] ACPI: Reserving FACS table memory at [mem 0xd97fe080-0xd97fe0bf]
[ 0.010831] ACPI: Reserving APIC table memory at [mem 0xd7ffe358-0xd7ffe3b9]
[ 0.010832] ACPI: Reserving FPDT table memory at [mem 0xd7ffe3c0-0xd7ffe403]
[ 0.010833] ACPI: Reserving MCFG table memory at [mem 0xd7ffe408-0xd7ffe443]
[ 0.010834] ACPI: Reserving HPET table memory at [mem 0xd7ffe448-0xd7ffe47f]
[ 0.010835] ACPI: Reserving SSDT table memory at [mem 0xd7ffe480-0xd7ffe894]
[ 0.010835] ACPI: Reserving SSDT table memory at [mem 0xd7ffe898-0xd7fff250]
[ 0.010836] ACPI: Reserving SSDT table memory at [mem 0xd7fff258-0xd7fffd79]
[ 0.010837] ACPI: Reserving ASF! table memory at [mem 0xd7fffd80-0xd7fffe24]
[ 0.010891] No NUMA configuration found
[ 0.010892] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff]
[ 0.010902] NODE_DATA(0) allocated [mem 0x11e5d3000-0x11e5fcfff]
[ 0.011249] Zone ranges:
[ 0.011249] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.011251] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.011252] Normal [mem 0x0000000100000000-0x000000011e5fffff]
[ 0.011254] Device empty
[ 0.011255] Movable zone start for each node
[ 0.011257] Early memory node ranges
[ 0.011258] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.011259] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.011260] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.011261] node 0: [mem 0x0000000040005000-0x00000000d159bfff]
[ 0.011262] node 0: [mem 0x00000000d15df000-0x00000000d6f09fff]
[ 0.011263] node 0: [mem 0x00000000d7000000-0x00000000d7755fff]
[ 0.011264] node 0: [mem 0x00000000d7800000-0x00000000d7fb3fff]
[ 0.011264] node 0: [mem 0x00000000d8000000-0x00000000d971dfff]
[ 0.011265] node 0: [mem 0x00000000d9800000-0x00000000dae00fff]
[ 0.011266] node 0: [mem 0x0000000100000000-0x000000011e5fffff]
[ 0.011267] Initmem setup node 0 [mem 0x0000000000001000-0x000000011e5fffff]
[ 0.011272] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.011305] On node 0, zone DMA: 99 pages in unavailable ranges
[ 0.014436] On node 0, zone DMA32: 512 pages in unavailable ranges
[ 0.022027] On node 0, zone DMA32: 1 pages in unavailable ranges
[ 0.022329] On node 0, zone DMA32: 67 pages in unavailable ranges
[ 0.022360] On node 0, zone DMA32: 246 pages in unavailable ranges
[ 0.022389] On node 0, zone DMA32: 170 pages in unavailable ranges
[ 0.022467] On node 0, zone DMA32: 76 pages in unavailable ranges
[ 0.022544] On node 0, zone DMA32: 226 pages in unavailable ranges
[ 0.023243] On node 0, zone Normal: 20991 pages in unavailable ranges
[ 0.023338] On node 0, zone Normal: 6656 pages in unavailable ranges
[ 0.023348] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[ 0.023445] ACPI: PM-Timer IO Port: 0x408
[ 0.023452] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.023466] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.023468] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.023470] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.023473] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.023474] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.023479] TSC deadline timer available
[ 0.023480] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.023502] PM: hibernation: Registered nosave memory: [mem
0x00000000-0x00000fff]
[ 0.023504] PM: hibernation: Registered nosave memory: [mem
0x0009d000-0x0009dfff]
[ 0.023505] PM: hibernation: Registered nosave memory: [mem
0x0009e000-0x0009ffff]
[ 0.023506] PM: hibernation: Registered nosave memory: [mem
0x000a0000-0x000dffff]
[ 0.023507] PM: hibernation: Registered nosave memory: [mem
0x000e0000-0x000fffff]
[ 0.023508] PM: hibernation: Registered nosave memory: [mem
0x20000000-0x201fffff]
[ 0.023510] PM: hibernation: Registered nosave memory: [mem
0x40004000-0x40004fff]
[ 0.023511] PM: hibernation: Registered nosave memory: [mem
0xd159c000-0xd15defff]
[ 0.023513] PM: hibernation: Registered nosave memory: [mem
0xd6f0a000-0xd6ffffff]
[ 0.023515] PM: hibernation: Registered nosave memory: [mem
0xd7756000-0xd77fffff]
[ 0.023516] PM: hibernation: Registered nosave memory: [mem
0xd7fb4000-0xd7ffffff]
[ 0.023518] PM: hibernation: Registered nosave memory: [mem
0xd971e000-0xd97fffff]
[ 0.023519] PM: hibernation: Registered nosave memory: [mem
0xdae01000-0xdf9fffff]
[ 0.023520] PM: hibernation: Registered nosave memory: [mem
0xdfa00000-0xf7ffffff]
[ 0.023521] PM: hibernation: Registered nosave memory: [mem
0xf8000000-0xfbffffff]
[ 0.023521] PM: hibernation: Registered nosave memory: [mem
0xfc000000-0xfebfffff]
[ 0.023522] PM: hibernation: Registered nosave memory: [mem
0xfec00000-0xfec00fff]
[ 0.023523] PM: hibernation: Registered nosave memory: [mem
0xfec01000-0xfecfffff]
[ 0.023524] PM: hibernation: Registered nosave memory: [mem
0xfed00000-0xfed03fff]
[ 0.023524] PM: hibernation: Registered nosave memory: [mem
0xfed04000-0xfed1bfff]
[ 0.023525] PM: hibernation: Registered nosave memory: [mem
0xfed1c000-0xfed1ffff]
[ 0.023526] PM: hibernation: Registered nosave memory: [mem
0xfed20000-0xfedfffff]
[ 0.023526] PM: hibernation: Registered nosave memory: [mem
0xfee00000-0xfee00fff]
[ 0.023527] PM: hibernation: Registered nosave memory: [mem
0xfee01000-0xfeffffff]
[ 0.023528] PM: hibernation: Registered nosave memory: [mem
0xff000000-0xffffffff]
[ 0.023529] [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.023530] Booting paravirtualized kernel on bare hardware
[ 0.023533] clocksource: refined-jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.027145] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2
nr_node_ids:1
[ 0.027400] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u1048576
[ 0.027407] pcpu-alloc: s192512 r8192 d28672 u1048576 alloc=1*2097152
[ 0.027409] pcpu-alloc: [0] 0 1
[ 0.027438] Built 1 zonelists, mobility grouping on. Total pages: 1003443
[ 0.027440] Policy zone: Normal
[ 0.027441] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-2-amd64
root=UUID=c27a1c2e-4689-49ec-ab55-bba0dae046dc ro vsyscall=none
security=apparmor page_poison=1 quiet
[ 0.027513] Unknown command line parameters:
BOOT_IMAGE=/boot/vmlinuz-5.14.0-2-amd64
[ 0.027866] Dentry cache hash table entries: 524288 (order: 10, 4194304
bytes, linear)
[ 0.028047] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes,
linear)
[ 0.028078] mem auto-init: CONFIG_PAGE_POISONING is on, will take precedence
over init_on_alloc and init_on_free
[ 0.028084] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.393751] Memory: 3521212K/4078124K available (12295K kernel code, 2644K
rwdata, 8032K rodata, 2632K init, 5260K bss, 263212K reserved, 0K cma-reserved)
[ 0.393760] random: get_random_u64 called from
__kmem_cache_create+0x2a/0x580 with crng_init=0
[ 0.393888] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.393901] Kernel/User page tables isolation: enabled
[ 0.393918] ftrace: allocating 37655 entries in 148 pages
[ 0.404612] ftrace: allocated 148 pages with 3 groups
[ 0.404726] rcu: Hierarchical RCU implementation.
[ 0.404727] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.404729] Rude variant of Tasks RCU enabled.
[ 0.404729] Tracing variant of Tasks RCU enabled.
[ 0.404730] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.404730] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.408398] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[ 0.410186] Console: colour VGA+ 80x25
[ 0.410199] printk: console [tty0] enabled
[ 0.410211] ACPI: Core revision 20210604
[ 0.410293] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 133484882848 ns
[ 0.410308] APIC: Switch to symmetric I/O mode setup
[ 0.410718] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.430310] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles:
0x2f757dad376, max_idle_ns: 440795291441 ns
[ 0.430316] Calibrating delay loop (skipped), value calculated using timer
frequency.. 6584.92 BogoMIPS (lpj=13169856)
[ 0.430318] pid_max: default: 32768 minimum: 301
[ 0.430336] LSM: Security Framework initializing
[ 0.430345] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.430370] AppArmor: AppArmor initialized
[ 0.430395] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes,
linear)
[ 0.430410] Mountpoint-cache hash table entries: 8192 (order: 4, 65536
bytes, linear)
[ 0.430638] CPU0: Thermal monitoring enabled (TM1)
[ 0.430654] process: using mwait in idle threads
[ 0.430656] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.430657] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.430660] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user
pointer sanitization
[ 0.430662] Spectre V2 : Mitigation: Full generic retpoline
[ 0.430662] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on
context switch
[ 0.430663] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.430664] Spectre V2 : mitigation: Enabling conditional Indirect Branch
Prediction Barrier
[ 0.430665] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.430666] Speculative Store Bypass: Mitigation: Speculative Store Bypass
disabled via prctl and seccomp
[ 0.430668] MDS: Mitigation: Clear CPU buffers
[ 0.434121] Freeing SMP alternatives memory: 32K
[ 0.434343] smpboot: Estimated ratio of average max frequency by base
frequency (times 1024): 1024
[ 0.434352] smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (family:
0x6, model: 0x3a, stepping: 0x9)
[ 0.434479] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR,
full-width counters, Intel PMU driver.
[ 0.434488] ... version: 3
[ 0.434489] ... bit width: 48
[ 0.434489] ... generic registers: 8
[ 0.434490] ... value mask: 0000ffffffffffff
[ 0.434491] ... max period: 00007fffffffffff
[ 0.434491] ... fixed-purpose events: 3
[ 0.434492] ... event mask: 00000007000000ff
[ 0.434613] rcu: Hierarchical SRCU implementation.
[ 0.435081] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.435134] smp: Bringing up secondary CPUs ...
[ 0.435225] x86: Booting SMP configuration:
[ 0.435227] .... node #0, CPUs: #1
[ 0.438365] smp: Brought up 1 node, 2 CPUs
[ 0.438365] smpboot: Max logical packages: 1
[ 0.438365] smpboot: Total of 2 processors activated (13169.85 BogoMIPS)
[ 0.469910] node 0 deferred pages initialised in 28ms
[ 0.469950] devtmpfs: initialized
[ 0.469950] x86/mm: Memory block size: 128MB
[ 0.470509] ACPI: PM: Registering ACPI NVS region [mem
0xd159c000-0xd15defff] (274432 bytes)
[ 0.470509] ACPI: PM: Registering ACPI NVS region [mem
0xd971e000-0xd97fffff] (925696 bytes)
[ 0.470509] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.470509] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.470509] pinctrl core: initialized pinctrl subsystem
[ 0.470633] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.470811] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.470910] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic
allocations
[ 0.471003] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic
allocations
[ 0.471010] audit: initializing netlink subsys (disabled)
[ 0.471018] audit: type=2000 audit(1633507528.060:1): state=initialized
audit_enabled=0 res=1
[ 0.471018] thermal_sys: Registered thermal governor 'fair_share'
[ 0.471018] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.471018] thermal_sys: Registered thermal governor 'step_wise'
[ 0.471018] thermal_sys: Registered thermal governor 'user_space'
[ 0.471018] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.471018] cpuidle: using governor ladder
[ 0.471018] cpuidle: using governor menu
[ 0.471018] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[ 0.471018] ACPI: bus type PCI registered
[ 0.471018] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.471018] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.471018] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.471018] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a
huge-page mapping due to MTRR override.
[ 0.471018] PCI: Using configuration type 1 for base access
[ 0.471018] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.471018] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.471018] Kprobes globally optimized
[ 0.471018] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.602430] ACPI: Added _OSI(Module Device)
[ 0.602430] ACPI: Added _OSI(Processor Device)
[ 0.602430] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.602430] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.602430] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.602430] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.602430] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.606313] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.606313] ACPI: Dynamic OEM Table Load:
[ 0.606313] ACPI: SSDT 0xFFFF949780309000 00083B (v01 PmRef Cpu0Cst
00003001 INTL 20051117)
[ 0.606313] ACPI: Dynamic OEM Table Load:
[ 0.606313] ACPI: SSDT 0xFFFF9497802FD400 000303 (v01 PmRef ApIst
00003000 INTL 20051117)
[ 0.606313] ACPI: Dynamic OEM Table Load:
[ 0.606313] ACPI: SSDT 0xFFFF94979A239A00 000119 (v01 PmRef ApCst
00003000 INTL 20051117)
[ 0.606313] ACPI: Interpreter enabled
[ 0.606313] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.606313] ACPI: Using IOAPIC for interrupt routing
[ 0.606313] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.606313] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.611598] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.611604] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI HPX-Type3]
[ 0.611785] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug
SHPCHotplug PME]
[ 0.611883] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.611884] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS
configuration
[ 0.612230] PCI host bridge to bus 0000:00
[ 0.612232] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.612234] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.612235] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff
window]
[ 0.612236] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff
window]
[ 0.612237] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff
window]
[ 0.612239] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff
window]
[ 0.612240] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff
window]
[ 0.612241] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff
window]
[ 0.612242] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff
window]
[ 0.612243] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff
window]
[ 0.612245] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.612257] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.612338] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
[ 0.612345] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.612350] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit
pref]
[ 0.612353] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.612502] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.612521] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
[ 0.612586] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.612681] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.612701] pci 0000:00:16.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c00f 64bit]
[ 0.612771] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.612849] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.612863] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
[ 0.612871] pci 0000:00:19.0: reg 0x14: [mem 0xf7c39000-0xf7c39fff]
[ 0.612879] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.612933] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.613020] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.613036] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c38000-0xf7c383ff]
[ 0.613114] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.613209] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.613226] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
[ 0.613298] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.613389] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.613404] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c37000-0xf7c373ff]
[ 0.613483] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.613563] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.613688] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100
[ 0.613860] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.613873] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.613880] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.613887] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.613895] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.613901] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.613908] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c36000-0xf7c367ff]
[ 0.613946] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.614021] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.614037] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c35000-0xf7c350ff 64bit]
[ 0.614056] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.614152] pci_bus 0000:01: extended config space not accessible
[ 0.614199] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.614208] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window]
(subtractive decode)
[ 0.614209] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window]
(subtractive decode)
[ 0.614211] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff
window] (subtractive decode)
[ 0.614212] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff
window] (subtractive decode)
[ 0.614213] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff
window] (subtractive decode)
[ 0.614214] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff
window] (subtractive decode)
[ 0.614215] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff
window] (subtractive decode)
[ 0.614216] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff
window] (subtractive decode)
[ 0.614218] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff
window] (subtractive decode)
[ 0.614219] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfeafffff
window] (subtractive decode)
[ 0.614639] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.614684] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.614685] ACPI: PCI: Interrupt link LNKB disabled
[ 0.614728] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.614765] ACPI: PCI: Interrupt link LNKD configured for IRQ 10
[ 0.614807] ACPI: PCI: Interrupt link LNKE configured for IRQ 5
[ 0.614848] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.614849] ACPI: PCI: Interrupt link LNKF disabled
[ 0.614890] ACPI: PCI: Interrupt link LNKG configured for IRQ 3
[ 0.614929] ACPI: PCI: Interrupt link LNKH configured for IRQ 4
[ 0.618328] iommu: Default domain type: Translated
[ 0.618330] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.618330] pci 0000:00:02.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.618330] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.618330] vgaarb: loaded
[ 0.618382] EDAC MC: Ver: 3.0.0
[ 0.618435] NetLabel: Initializing
[ 0.618436] NetLabel: domain hash size = 128
[ 0.618437] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.618449] NetLabel: unlabeled traffic allowed by default
[ 0.618449] PCI: Using ACPI for IRQ routing
[ 0.619890] PCI: pci_cache_line_size set to 64 bytes
[ 0.619922] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.619923] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.619924] e820: reserve RAM buffer [mem 0xd159c000-0xd3ffffff]
[ 0.619925] e820: reserve RAM buffer [mem 0xd6f0a000-0xd7ffffff]
[ 0.619926] e820: reserve RAM buffer [mem 0xd7756000-0xd7ffffff]
[ 0.619927] e820: reserve RAM buffer [mem 0xd7fb4000-0xd7ffffff]
[ 0.619928] e820: reserve RAM buffer [mem 0xd971e000-0xdbffffff]
[ 0.619929] e820: reserve RAM buffer [mem 0xdae01000-0xdbffffff]
[ 0.619930] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
[ 0.620692] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.620701] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.623361] clocksource: Switched to clocksource tsc-early
[ 0.628148] VFS: Disk quotas dquot_6.6.0
[ 0.628164] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.628255] AppArmor: AppArmor Filesystem Enabled
[ 0.628271] pnp: PnP ACPI init
[ 0.628378] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.628459] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.628462] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.628463] system 00:01: [io 0xffff] has been reserved
[ 0.628464] system 00:01: [io 0xffff] has been reserved
[ 0.628465] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.628467] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.628468] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.628469] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.628522] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.628600] system 00:04: [io 0x0a40-0x0a4f] has been reserved
[ 0.628601] system 00:04: [io 0x0a00-0x0a3f] has been reserved
[ 0.628638] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.628870] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.628872] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.628874] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.628876] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.628877] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.628879] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.628881] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.628882] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.628884] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.628886] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.628887] system 00:06: [mem 0xdfa00000-0xdfa00fff] has been reserved
[ 0.629016] system 00:07: [mem 0x20000000-0x201fffff] has been reserved
[ 0.629018] system 00:07: [mem 0x40004000-0x40004fff] has been reserved
[ 0.629032] pnp: PnP ACPI: found 8 devices
[ 0.634528] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff,
max_idle_ns: 2085701024 ns
[ 0.634575] NET: Registered PF_INET protocol family
[ 0.634698] IP idents hash table entries: 65536 (order: 7, 524288 bytes,
linear)
[ 0.635599] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3,
32768 bytes, linear)
[ 0.635651] TCP established hash table entries: 32768 (order: 6, 262144
bytes, linear)
[ 0.635781] TCP bind hash table entries: 32768 (order: 7, 524288 bytes,
linear)
[ 0.635813] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.635899] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes,
linear)
[ 0.635928] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.635948] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.635975] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.635979] NET: Registered PF_XDP protocol family
[ 0.635990] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.636005] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.636007] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.636009] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.636010] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.636011] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.636012] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.636013] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.636015] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.636016] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.636017] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
[ 0.636018] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.636020] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.636021] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.636022] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.636023] pci_bus 0000:01: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.636024] pci_bus 0000:01: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.636025] pci_bus 0000:01: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.636026] pci_bus 0000:01: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.636028] pci_bus 0000:01: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.636029] pci_bus 0000:01: resource 13 [mem 0xdfa00000-0xfeafffff window]
[ 0.636110] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled;
disabling
[ 0.636122] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.662409] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x700 took 21507
usecs
[ 0.686408] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x700 took 23421
usecs
[ 0.686427] PCI: CLS 64 bytes, default 64
[ 0.686433] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.686434] software IO TLB: mapped [mem
0x00000000d2f0a000-0x00000000d6f0a000] (64MB)
[ 0.686481] Trying to unpack rootfs image as initramfs...
[ 0.686814] Initialise system trusted keyrings
[ 0.686828] Key type blacklist registered
[ 0.686881] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.687916] zbud: loaded
[ 0.688163] integrity: Platform Keyring initialized
[ 0.688166] Key type asymmetric registered
[ 0.688168] Asymmetric key parser 'x509' registered
[ 0.688178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
250)
[ 0.688293] io scheduler mq-deadline registered
[ 0.694545] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.694895] ACPI: \_TZ_.TZ00: Invalid active0 threshold
[ 0.694963] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.694965] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.695113] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.695115] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ 0.695191] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.695560] Linux agpgart interface v0.103
[ 0.695598] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[ 0.695599] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.695888] i8042: PNP: No PS/2 controller found.
[ 0.695889] i8042: Probing ports directly.
[ 0.698623] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.698629] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.698712] mousedev: PS/2 mouse device common for all mice
[ 0.698754] rtc_cmos 00:02: RTC can wake from S4
[ 0.698953] rtc_cmos 00:02: registered as rtc0
[ 0.698991] rtc_cmos 00:02: setting system clock to 2021-10-06T08:05:29 UTC
(1633507529)
[ 0.699008] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram,
hpet irqs
[ 0.699106] intel_pstate: Intel P-state driver initializing
[ 0.699519] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.699917] NET: Registered PF_INET6 protocol family
[ 1.661285] Freeing initrd memory: 86984K
[ 1.671983] Segment Routing with IPv6
[ 1.672019] mip6: Mobile IPv6
[ 1.672021] NET: Registered PF_PACKET protocol family
[ 1.672088] mpls_gso: MPLS GSO support
[ 1.672318] microcode: sig=0x306a9, pf=0x2, revision=0x21
[ 1.672323] microcode: Microcode Update Driver: v2.2.
[ 1.672329] IPI shorthand broadcast: enabled
[ 1.672337] sched_clock: Marking stable (1670493777, 1713593)->(1674052502,
-1845132)
[ 1.672488] registered taskstats version 1
[ 1.672491] Loading compiled-in X.509 certificates
[ 1.686332] tsc: Refined TSC clocksource calibration: 3292.510 MHz
[ 1.686338] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x2f75a91e5bd, max_idle_ns: 440795324717 ns
[ 1.686368] clocksource: Switched to clocksource tsc
[ 1.702417] Loaded X.509 cert 'Debian Secure Boot CA:
6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 1.702429] Loaded X.509 cert 'Debian Secure Boot Signer 2021 - linux:
4b6ef5abca669825178e052c84667ccbc0531f8c'
[ 1.702520] zswap: loaded using pool lzo/zbud
[ 1.702666] Key type ._fscrypt registered
[ 1.702667] Key type .fscrypt registered
[ 1.702667] Key type fscrypt-provisioning registered
[ 1.705725] Key type encrypted registered
[ 1.705729] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.705740] ima: No TPM chip found, activating TPM-bypass!
[ 1.705744] ima: Allocated hash algorithm: sha256
[ 1.705756] ima: No architecture policies found
[ 1.705763] evm: Initialising EVM extended attributes:
[ 1.705764] evm: security.selinux
[ 1.705765] evm: security.SMACK64 (disabled)
[ 1.705765] evm: security.SMACK64EXEC (disabled)
[ 1.705766] evm: security.SMACK64TRANSMUTE (disabled)
[ 1.705766] evm: security.SMACK64MMAP (disabled)
[ 1.705767] evm: security.apparmor
[ 1.705767] evm: security.ima
[ 1.705768] evm: security.capability
[ 1.705768] evm: HMAC attrs: 0x1
[ 1.706937] Freeing unused decrypted memory: 2036K
[ 1.707326] Freeing unused kernel image (initmem) memory: 2632K
[ 1.726399] Write protecting the kernel read-only data: 22528k
[ 1.726851] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 1.726926] Freeing unused kernel image (rodata/data gap) memory: 160K
[ 1.771492] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.771494] x86/mm: Checking user space page tables
[ 1.812683] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.812689] Run /init as init process
[ 1.812690] with arguments:
[ 1.812691] /init
[ 1.812692] with environment:
[ 1.812692] HOME=/
[ 1.812693] TERM=linux
[ 1.812694] BOOT_IMAGE=/boot/vmlinuz-5.14.0-2-amd64
[ 1.922365] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.934963] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method
not found
[ 1.937244] pps_core: LinuxPPS API ver. 1 registered
[ 1.937248] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 1.938538] PTP clock support registered
[ 1.945194] ACPI: button: Power Button [PWRB]
[ 1.945252] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.945279] ACPI: button: Power Button [PWRF]
[ 1.956273] ACPI: bus type USB registered
[ 1.956299] usbcore: registered new interface driver usbfs
[ 1.956306] usbcore: registered new interface driver hub
[ 1.956315] usbcore: registered new device driver usb
[ 1.958951] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.958955] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.959125] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to
dynamic conservative mode
[ 1.960371] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.960977] ehci-pci: EHCI PCI platform driver
[ 1.961094] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.961099] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 1.961114] ehci-pci 0000:00:1a.0: debug port 2
[ 1.966596] ACPI Warning: SystemIO range
0x0000000000000428-0x000000000000042F conflicts with OpRegion
0x0000000000000400-0x000000000000047F (\PMIO) (20210604/utaddress-204)
[ 1.966603] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.966608] ACPI Warning: SystemIO range
0x0000000000000540-0x000000000000054F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20210604/utaddress-204)
[ 1.966611] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.966611] ACPI Warning: SystemIO range
0x0000000000000530-0x000000000000053F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20210604/utaddress-204)
[ 1.966613] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.966614] ACPI Warning: SystemIO range
0x0000000000000500-0x000000000000052F conflicts with OpRegion
0x0000000000000500-0x0000000000000563 (\GPIO) (20210604/utaddress-204)
[ 1.966616] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 1.966617] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.976872] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.977904] i2c i2c-0: 1/4 memory slots populated (from DMI)
[ 1.983769] i2c i2c-0: Successfully instantiated SPD at 0x51
[ 1.993202] SCSI subsystem initialized
[ 1.994060] cryptd: max_cpu_qlen set to 1000
[ 2.000222] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c38000
[ 2.014451] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.014541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.14
[ 2.014544] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.014546] usb usb1: Product: EHCI Host Controller
[ 2.014547] usb usb1: Manufacturer: Linux 5.14.0-2-amd64 ehci_hcd
[ 2.014548] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.014741] hub 1-0:1.0: USB hub found
[ 2.014751] hub 1-0:1.0: 2 ports detected
[ 2.014942] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.014950] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 2
[ 2.016030] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100
quirks 0x000000000000b930
[ 2.016233] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.016236] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus
number 3
[ 2.016240] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.016284] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.14
[ 2.016287] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.016288] usb usb2: Product: xHCI Host Controller
[ 2.016289] usb usb2: Manufacturer: Linux 5.14.0-2-amd64 xhci-hcd
[ 2.016290] usb usb2: SerialNumber: 0000:00:14.0
[ 2.016389] hub 2-0:1.0: USB hub found
[ 2.016402] hub 2-0:1.0: 4 ports detected
[ 2.016717] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003,
bcdDevice= 5.14
[ 2.016719] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.016721] usb usb3: Product: xHCI Host Controller
[ 2.016722] usb usb3: Manufacturer: Linux 5.14.0-2-amd64 xhci-hcd
[ 2.016723] usb usb3: SerialNumber: 0000:00:14.0
[ 2.016794] hub 3-0:1.0: USB hub found
[ 2.016806] hub 3-0:1.0: 4 ports detected
[ 2.017331] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.017335] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus
number 4
[ 2.017348] ehci-pci 0000:00:1d.0: debug port 2
[ 2.021275] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c37000
[ 2.034391] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.034446] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.14
[ 2.034448] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.034450] usb usb4: Product: EHCI Host Controller
[ 2.034451] usb usb4: Manufacturer: Linux 5.14.0-2-amd64 ehci_hcd
[ 2.034452] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.034558] hub 4-0:1.0: USB hub found
[ 2.034564] hub 4-0:1.0: 2 ports detected
[ 2.045125] libata version 3.00 loaded.
[ 2.054189] ahci 0000:00:1f.2: version 3.0
[ 2.054388] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1
impl SATA mode
[ 2.054392] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems
apst
[ 2.060087] scsi host0: ahci
[ 2.063409] scsi host1: ahci
[ 2.063755] scsi host2: ahci
[ 2.064101] scsi host3: ahci
[ 2.064438] scsi host4: ahci
[ 2.064777] scsi host5: ahci
[ 2.064820] ata1: SATA max UDMA/133 abar m2048@0xf7c36000 port 0xf7c36100
irq 26
[ 2.064823] ata2: DUMMY
[ 2.064824] ata3: DUMMY
[ 2.064824] ata4: DUMMY
[ 2.064825] ata5: DUMMY
[ 2.064826] ata6: DUMMY
[ 2.114652] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 2.115536] Console: switching to colour dummy device 80x25
[ 2.116712] i915 0000:00:02.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.126562] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC
clock
[ 2.126796] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 2.127162] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no
post: no)
[ 2.127658] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 2.154171] fbcon: i915 (fb0) is primary device
[ 2.226768] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1)
b8:ca:3a:7c:1e:f3
[ 2.226771] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.226810] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1011FF-0FF
[ 2.240368] Console: switching to colour frame buffer device 160x64
[ 2.255800] i915 0000:00:02.0: [drm] fb0: i915 frame buffer device
[ 2.270348] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.270388] usb 2-4: new high-speed USB device number 2 using xhci_hcd
[ 2.298346] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 2.380843] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.381613] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.381623] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 2.381627] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 2.381806] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device
(Stat=0x53 Err=0x04)
[ 2.382634] ata1.00: ATA-8: INTEL SSDSC2BA800G3T, 5DV1DL03, max UDMA/133
[ 2.382641] ata1.00: 1562824368 sectors, multi 1: LBA48 NCQ (depth 32)
[ 2.383503] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.383513] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 2.383517] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 2.383615] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device
(Stat=0x53 Err=0x04)
[ 2.384470] ata1.00: configured for UDMA/133
[ 2.385760] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BA80 DL03
PQ: 0 ANSI: 5
[ 2.395260] ata1.00: Enabling discard_zeroes_data
[ 2.395308] sd 0:0:0:0: [sda] 1562824368 512-byte logical blocks: (800
GB/745 GiB)
[ 2.395317] sd 0:0:0:0: [sda] Write Protect is off
[ 2.395319] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.395331] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 2.414530] ata1.00: Enabling discard_zeroes_data
[ 2.414797] sda: sda1
[ 2.414972] ata1.00: Enabling discard_zeroes_data
[ 2.426402] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.430558] usb 2-4: New USB device found, idVendor=174c, idProduct=2074,
bcdDevice= 1.00
[ 2.430563] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2.430565] usb 2-4: Product: ASM107x
[ 2.430566] usb 2-4: Manufacturer: Asmedia
[ 2.430567] usb 2-4: SerialNumber: 0000000A0001
[ 2.431058] hub 2-4:1.0: USB hub found
[ 2.431226] hub 2-4:1.0: 4 ports detected
[ 2.434642] usb 1-1: New USB device found, idVendor=8087, idProduct=0024,
bcdDevice= 0.00
[ 2.434647] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.434832] hub 1-1:1.0: USB hub found
[ 2.434953] hub 1-1:1.0: 6 ports detected
[ 2.447311] random: fast init done
[ 2.454687] usb 4-1: New USB device found, idVendor=8087, idProduct=0024,
bcdDevice= 0.00
[ 2.454696] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.454957] hub 4-1:1.0: USB hub found
[ 2.455076] hub 4-1:1.0: 8 ports detected
[ 2.474775] device-mapper: uevent: version 1.0.3
[ 2.474871] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised:
dm-de...@redhat.com
[ 2.570317] raid6: sse2x4 gen() 16200 MB/s
[ 2.638316] raid6: sse2x4 xor() 8023 MB/s
[ 2.706316] raid6: sse2x2 gen() 16655 MB/s
[ 2.774316] raid6: sse2x2 xor() 9240 MB/s
[ 2.842315] raid6: sse2x1 gen() 13831 MB/s
[ 2.910315] raid6: sse2x1 xor() 8337 MB/s
[ 2.910316] raid6: using algorithm sse2x2 gen() 16655 MB/s
[ 2.910317] raid6: .... xor() 9240 MB/s, rmw enabled
[ 2.910318] raid6: using ssse3x2 recovery algorithm
[ 2.910407] usb 3-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.911074] xor: automatically using best checksumming function avx
[ 2.911575] async_tx: api initialized (async)
[ 2.931826] usb 3-2: New USB device found, idVendor=0bc2, idProduct=331a,
bcdDevice= 9.15
[ 2.931835] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.931839] usb 3-2: Product: Expansion Desk
[ 2.931841] usb 3-2: Manufacturer: Seagate
[ 2.931843] usb 3-2: SerialNumber: NAAB4QPC
[ 3.062546] usb 3-4: new SuperSpeed USB device number 3 using xhci_hcd
[ 3.085708] usb 3-4: New USB device found, idVendor=174c, idProduct=3074,
bcdDevice= 1.00
[ 3.085716] usb 3-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.085719] usb 3-4: Product: ASM107x
[ 3.085721] usb 3-4: Manufacturer: Asmedia
[ 3.085723] usb 3-4: SerialNumber: 0000000A0001
[ 3.087191] hub 3-4:1.0: USB hub found
[ 3.087404] hub 3-4:1.0: 4 ports detected
[ 3.093259] usbcore: registered new interface driver usb-storage
[ 3.094324] usb 1-1.1: new low-speed USB device number 3 using ehci-pci
[ 3.097200] scsi host6: uas
[ 3.097335] usbcore: registered new interface driver uas
[ 3.097914] scsi 6:0:0:0: Direct-Access Seagate Expansion Desk 0915
PQ: 0 ANSI: 6
[ 3.099510] sd 6:0:0:0: [sdb] 19532873727 512-byte logical blocks: (10.0
TB/9.09 TiB)
[ 3.099513] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 3.099669] sd 6:0:0:0: [sdb] Write Protect is off
[ 3.099672] sd 6:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 3.099963] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.100258] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a
multiple of physical block size (4096 bytes)
[ 3.125217] sdb: sdb1
[ 3.126759] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 3.185180] Btrfs loaded, crc32c=crc32c-intel, zoned=yes
[ 3.209769] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2107,
bcdDevice= 1.15
[ 3.209777] usb 1-1.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.209781] usb 1-1.1: Product: Dell USB Entry Keyboard
[ 3.209783] usb 1-1.1: Manufacturer: Dell
[ 3.215303] BTRFS: device label Sauvegarde-PI devid 1 transid 3233 /dev/sdb1
scanned by btrfs (247)
[ 3.216161] hid: raw HID events driver (C) Jiri Kosina
[ 3.222368] usbcore: registered new interface driver usbhid
[ 3.222372] usbhid: USB HID core driver
[ 3.224241] input: Dell Dell USB Entry Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:413C:2107.0001/input/input6
[ 3.282502] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10
Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1a.0-1.1/input0
[ 3.290359] usb 1-1.2: new low-speed USB device number 4 using ehci-pci
[ 3.290393] usb 3-4.1: new SuperSpeed USB device number 4 using xhci_hcd
[ 3.311311] usb 3-4.1: New USB device found, idVendor=0480, idProduct=a006,
bcdDevice= 1.00
[ 3.311318] usb 3-4.1: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 3.311320] usb 3-4.1: Product: Master DAS
[ 3.311322] usb 3-4.1: Manufacturer: Terra
[ 3.311323] usb 3-4.1: SerialNumber: 201712079182
[ 3.314431] scsi host7: uas
[ 3.315970] scsi 7:0:0:0: Direct-Access Terra Master DAS 0
PQ: 0 ANSI: 6
[ 3.320994] scsi 7:0:0:1: Direct-Access Terra Master DAS 0
PQ: 0 ANSI: 6
[ 3.330353] sd 7:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00
TB/3.64 TiB)
[ 3.330358] sd 7:0:0:0: [sdc] 4096-byte physical blocks
[ 3.331135] sd 7:0:0:1: [sdd] 15628053168 512-byte logical blocks: (8.00
TB/7.28 TiB)
[ 3.331137] sd 7:0:0:1: [sdd] 4096-byte physical blocks
[ 3.331193] sd 7:0:0:0: [sdc] Write Protect is off
[ 3.331195] sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 3.331402] sd 7:0:0:1: [sdd] Write Protect is off
[ 3.331404] sd 7:0:0:1: [sdd] Mode Sense: 43 00 00 00
[ 3.332615] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.332699] sd 7:0:0:1: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.333349] sd 7:0:0:0: [sdc] Optimal transfer size 33553920 bytes not a
multiple of physical block size (4096 bytes)
[ 3.350394] pagealloc: memory corruption
[ 3.350420] (____ptrval____): 00 00 00 04 00 80 83 b0
........
[ 3.350447] CPU: 0 PID: 161 Comm: kworker/u4:5 Not tainted 5.14.0-2-amd64 #1
Debian 5.14.9-2
[ 3.350450] Hardware name: Dell Inc. OptiPlex 7010/0KRC95, BIOS A29
06/28/2018
[ 3.350451] Workqueue: events_unbound async_run_entry_fn
[ 3.350457] Call Trace:
[ 3.350461] dump_stack_lvl+0x46/0x5a
[ 3.350465] __kernel_unpoison_pages.cold+0x49/0x85
[ 3.350470] get_page_from_freelist+0xc61/0xe50
[ 3.350474] ? chacha_block_generic+0x6f/0xb0
[ 3.350476] __alloc_pages+0x178/0x310
[ 3.350479] allocate_slab+0x87/0x490
[ 3.350482] ___slab_alloc+0x3eb/0x570
[ 3.350485] ? scsi_mq_init_request+0x2e/0xe0 [scsi_mod]
[ 3.350497] ? scsi_mq_init_request+0x2e/0xe0 [scsi_mod]
[ 3.350505] __slab_alloc+0x1c/0x40
[ 3.350507] kmem_cache_alloc_node+0x39c/0x3e0
[ 3.350510] scsi_mq_init_request+0x2e/0xe0 [scsi_mod]
[ 3.350518] blk_mq_alloc_rqs+0x20e/0x2a0
[ 3.350522] blk_mq_init_sched+0xa9/0x350
[ 3.350524] elevator_init_mq+0x125/0x160
[ 3.350527] __device_add_disk+0x19e/0x2f0
[ 3.350530] sd_probe+0x2f0/0x4a0 [sd_mod]
[ 3.350533] really_probe+0x1f5/0x3f0
[ 3.350537] __driver_probe_device+0xfe/0x180
[ 3.350539] driver_probe_device+0x1e/0x90
[ 3.350541] __device_attach_driver+0x72/0xe0
[ 3.350543] ? driver_allows_async_probing+0x50/0x50
[ 3.350545] ? driver_allows_async_probing+0x50/0x50
[ 3.350547] bus_for_each_drv+0x7e/0xc0
[ 3.350549] __device_attach_async_helper+0x9f/0xe0
[ 3.350551] async_run_entry_fn+0x30/0x130
[ 3.350554] process_one_work+0x1ec/0x390
[ 3.350556] worker_thread+0x53/0x3e0
[ 3.350558] ? process_one_work+0x390/0x390
[ 3.350559] kthread+0x127/0x150
[ 3.350562] ? set_kthread_struct+0x40/0x40
[ 3.350565] ret_from_fork+0x22/0x30
[ 3.350572] page:(____ptrval____) refcount:1 mapcount:0
mapping:0000000000000000 index:0x0 pfn:0x1165a0
[ 3.350574] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 3.350577] raw: 0017ffffc0000000 dead000000000100 dead000000000122
0000000000000000
[ 3.350579] raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
[ 3.350579] page dumped because: pagealloc: corrupted page details
[ 3.354743] sdc: sdc1
[ 3.357582] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 3.365638] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null). Quota mode: none.
[ 3.406407] usb 3-4.2: new SuperSpeed USB device number 5 using xhci_hcd
[ 3.407905] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c03e,
bcdDevice=20.00
[ 3.407910] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.407912] usb 1-1.2: Product: USB-PS/2 Optical Mouse
[ 3.407913] usb 1-1.2: Manufacturer: Logitech
[ 3.411721] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C03E.0002/input/input7
[ 3.411846] hid-generic 0003:046D:C03E.0002: input,hidraw1: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0
[ 3.427270] usb 3-4.2: New USB device found, idVendor=0480, idProduct=a006,
bcdDevice= 1.00
[ 3.427276] usb 3-4.2: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 3.427278] usb 3-4.2: Product: Master DAS
[ 3.427279] usb 3-4.2: Manufacturer: Terra
[ 3.427280] usb 3-4.2: SerialNumber: 201712079191
[ 3.430561] scsi host8: uas
[ 3.431049] scsi 8:0:0:0: Direct-Access Terra Master DAS 0
PQ: 0 ANSI: 6
[ 3.431967] sd 8:0:0:0: [sde] 31251759104 512-byte logical blocks: (16.0
TB/14.6 TiB)
[ 3.431970] sd 8:0:0:0: [sde] 4096-byte physical blocks
[ 3.432086] sd 8:0:0:0: [sde] Write Protect is off
[ 3.432089] sd 8:0:0:0: [sde] Mode Sense: 43 00 00 00
[ 3.432248] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.432489] sd 8:0:0:0: [sde] Optimal transfer size 33553920 bytes not a
multiple of physical block size (4096 bytes)
[ 3.453240] sde: sde1
[ 3.454227] sd 8:0:0:0: [sde] Attached SCSI disk
[ 3.510419] usb 3-4.3: new SuperSpeed USB device number 6 using xhci_hcd
[ 3.531200] usb 3-4.3: New USB device found, idVendor=0480, idProduct=a006,
bcdDevice= 1.00
[ 3.531205] usb 3-4.3: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 3.531207] usb 3-4.3: Product: Master DAS
[ 3.531208] usb 3-4.3: Manufacturer: Terra
[ 3.531209] usb 3-4.3: SerialNumber: 201712079190
[ 3.534831] scsi host9: uas
[ 3.535259] scsi 9:0:0:0: Direct-Access Terra Master DAS 0
PQ: 0 ANSI: 6
[ 3.536326] sd 9:0:0:0: [sdf] 19532873728 512-byte logical blocks: (10.0
TB/9.10 TiB)
[ 3.536332] sd 9:0:0:0: [sdf] 4096-byte physical blocks
[ 3.536421] sd 9:0:0:0: [sdf] Write Protect is off
[ 3.536425] sd 9:0:0:0: [sdf] Mode Sense: 43 00 00 00
[ 3.536583] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.536839] sd 9:0:0:0: [sdf] Optimal transfer size 33553920 bytes not a
multiple of physical block size (4096 bytes)
[ 3.566628] sdf: sdf1
[ 3.567465] sd 9:0:0:0: [sdf] Attached SCSI disk
[ 3.569216] systemd[1]: Inserted module 'autofs4'
[ 3.588473] systemd[1]: systemd 249.4-1 running in system mode (+PAM +AUDIT
+SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID
+CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2
-PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP
+SYSVINIT default-hierarchy=unified)
[ 3.606417] systemd[1]: Detected architecture x86-64.
[ 3.606918] systemd[1]: Hostname set to [...]
[ 3.618388] usb 3-4.4: new SuperSpeed USB device number 7 using xhci_hcd
[ 3.639180] usb 3-4.4: New USB device found, idVendor=0480, idProduct=a006,
bcdDevice= 1.00
[ 3.639184] usb 3-4.4: New USB device strings: Mfr=2, Product=3,
SerialNumber=1
[ 3.639186] usb 3-4.4: Product: Master DAS
[ 3.639187] usb 3-4.4: Manufacturer: Terra
[ 3.639188] usb 3-4.4: SerialNumber: 201712079192
[ 3.642881] scsi host10: uas
[ 3.643314] scsi 10:0:0:0: Direct-Access Terra Master DAS 0
PQ: 0 ANSI: 6
[ 3.644183] sd 10:0:0:0: [sdg] 27344764928 512-byte logical blocks: (14.0
TB/12.7 TiB)
[ 3.644186] sd 10:0:0:0: [sdg] 4096-byte physical blocks
[ 3.644261] sd 10:0:0:0: [sdg] Write Protect is off
[ 3.644264] sd 10:0:0:0: [sdg] Mode Sense: 43 00 00 00
[ 3.644418] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.644658] sd 10:0:0:0: [sdg] Optimal transfer size 33553920 bytes not a
multiple of physical block size (4096 bytes)
[ 3.669085] sdg: sdg1
[ 3.669932] sd 10:0:0:0: [sdg] Attached SCSI disk
[ 3.856341] random: lvmconfig: uninitialized urandom read (4 bytes read)
