Package: src:linux
Version: 5.10.40-1
Severity: minor
X-Debbugs-Cc: tia3...@protonmail.com
Dear Maintainer,
>From time to time when waking up device from sleep kernel would give warning
>to journal saying 'done'.
Looking in snipet from journalctl -k
srp 15 15:45:47 HP2000 kernel: [drm] ib test on ring 5 succeeded
srp 15 15:45:47 HP2000 kernel: acpi LNXPOWER:01: Turning OFF
srp 15 15:45:47 HP2000 kernel: OOM killer enabled.
srp 15 15:45:47 HP2000 kernel: Restarting tasks ...
srp 15 15:45:47 HP2000 kernel: usb 1-1.1: USB disconnect, device number 11
srp 15 15:45:47 HP2000 kernel: done.
srp 15 15:45:47 HP2000 kernel: PM: suspend exit
srp 15 15:45:47 HP2000 kernel: usb 1-1.1: new full-speed USB device number 12
using ehci-pci
srp 15 15:45:47 HP2000 kernel: usb 1-1.1: New USB device found, idVendor=0cf3,
idProduct=3121, bcdDevice= 0.01
srp 15 15:45:47 HP2000 kernel: usb 1-1.1: New USB device strings: Mfr=0,
Product=0, SerialNumber=0
srp 15 15:45:47 HP2000 kernel: usb 1-1.1: firmware: direct-loading firmware
ar3k/AthrBT_0x31010000.dfu
srp 15 15:45:47 HP2000 kernel: usb 1-1.1: firmware: direct-loading firmware
ar3k/ramps_0x31010000_40.dfu
srp 15 15:45:47 HP2000 kernel: usb 1-1.1: USB disconnect, device number 12
srp 15 15:45:47 HP2000 kernel: usb 1-1.1: new full-speed USB device number 13
using ehci-pci
srp 15 15:45:49 HP2000 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
srp 15 15:45:49 HP2000 kernel: ata3.00: configured for UDMA/133
Where that done message is visible in journalctl under warning priority
srp 15 15:45:47 kernel: done.
Before on kernel 4.19 it would before that say how cpu core 0,1 and 2 shouldn't
be sleeping. But that is no longer the case.
It seems to be only cosmetic issue, as I can't see what it is refering to when
stating 'done.'
If it is cosmetic, could message priority be lowered?
Best regards,
Tia
-- Package-specific info:
** Version:
Linux version 5.10.0-7-amd64 (debian-ker...@lists.debian.org) (gcc-10 (Debian
10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP
Debian 5.10.40-1 (2021-05-28)
** Command line:
BOOT_IMAGE=/vmlinuz-5.10.0-7-amd64 root=/dev/mapper/HP2000--vg-root ro quiet
splash
** Not tainted
** Kernel log:
[15056.693436] ath: regdomain 0x80bf dynamically updated by country element
[15057.157713] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[15058.977720] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3121,
bcdDevice= 0.02
[15058.977727] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[23775.993160] Lockdown: systemd-logind: hibernation is restricted; see man
kernel_lockdown.7
[23775.999676] Lockdown: systemd-logind: hibernation is restricted; see man
kernel_lockdown.7
[23776.048959] wlo1: deauthenticating from 30:b5:c2:aa:a2:88 by local choice
(Reason: 3=DEAUTH_LEAVING)
[23776.442661] Lockdown: systemd-logind: hibernation is restricted; see man
kernel_lockdown.7
[23776.448519] Lockdown: systemd-logind: hibernation is restricted; see man
kernel_lockdown.7
[23776.449122] Lockdown: systemd-logind: hibernation is restricted; see man
kernel_lockdown.7
[23776.551727] PM: suspend entry (deep)
[23776.568683] Filesystems sync: 0.016 seconds
[23776.568979] (NULL device *): firmware: direct-loading firmware
regulatory.db.p7s
[23776.568980] (NULL device *): firmware: direct-loading firmware regulatory.db
[23776.638937] Freezing user space processes ... (elapsed 0.001 seconds) done.
[23776.640610] OOM killer disabled.
[23776.640611] Freezing remaining freezable tasks ... (elapsed 0.001 seconds)
done.
[23776.641912] printk: Suspending console(s) (use no_console_suspend to debug)
[23776.659099] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[23776.659147] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[23776.659206] sd 0:0:0:0: [sda] Stopping disk
[23776.660219] sd 2:0:0:0: [sdb] Stopping disk
[23777.727412] ACPI: EC: interrupt blocked
[23777.747468] ACPI: Preparing to enter system sleep state S3
[23777.748459] ACPI: EC: event blocked
[23777.748460] ACPI: EC: EC stopped
[23777.748461] PM: Saving platform NVS memory
[23777.748473] Disabling non-boot CPUs ...
[23777.749774] smpboot: CPU 1 is now offline
[23777.751969] smpboot: CPU 2 is now offline
[23777.754204] smpboot: CPU 3 is now offline
[23777.755563] ACPI: Low-level resume complete
[23777.755618] ACPI: EC: EC started
[23777.755619] PM: Restoring platform NVS memory
[23777.756965] Enabling non-boot CPUs ...
[23777.757016] x86: Booting SMP configuration:
[23777.757017] smpboot: Booting Node 0 Processor 1 APIC 0x1
[23777.763384] CPU1 is up
[23777.763417] smpboot: Booting Node 0 Processor 2 APIC 0x2
[23777.766647] CPU2 is up
[23777.766676] smpboot: Booting Node 0 Processor 3 APIC 0x3
[23777.769271] CPU3 is up
[23777.770470] ACPI: Waking up from system sleep state S3
[23777.784081] ACPI: EC: interrupt unblocked
[23777.824336] ACPI: EC: event unblocked
[23777.824679] ath: phy0: ASPM enabled: 0x43
[23777.833370] [drm] enabling PCIE gen 2 link speeds, disable with
radeon.pcie_gen2=0
[23777.834530] sd 0:0:0:0: [sda] Starting disk
[23777.834559] sd 2:0:0:0: [sdb] Starting disk
[23777.840943] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[23777.841064] radeon 0000:01:00.0: WB enabled
[23777.841066] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr
0x0000000040000c00
[23777.841068] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr
0x0000000040000c0c
[23777.841874] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr
0x0000000000072118
[23777.858500] [drm] ring test on 0 succeeded in 2 usecs
[23777.858518] [drm] ring test on 3 succeeded in 13 usecs
[23778.034287] [drm] ring test on 5 succeeded in 2 usecs
[23778.034295] [drm] UVD initialized successfully.
[23778.034429] [drm] ib test on ring 0 succeeded in 0 usecs
[23778.034562] [drm] ib test on ring 3 succeeded in 0 usecs
[23778.099906] usb 1-1.1: reset full-speed USB device number 13 using ehci-pci
[23778.107869] usb 2-1.3: reset high-speed USB device number 3 using ehci-pci
[23778.158157] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[23778.159562] ata1.00: configured for UDMA/133
[23778.216282] usb 1-1.1: device firmware changed
[23778.468450] psmouse serio1: synaptics: queried max coordinates: x [..5734],
y [..4974]
[23778.495135] psmouse serio1: synaptics: queried min coordinates: x [1222..],
y [910..]
[23778.704016] [drm] ib test on ring 5 succeeded
[23778.736883] acpi LNXPOWER:01: Turning OFF
[23778.736905] OOM killer enabled.
[23778.736906] Restarting tasks ... done.
[23778.761397] usb 1-1.1: USB disconnect, device number 13
[23778.782678] PM: suspend exit
[23778.869897] usb 1-1.1: new full-speed USB device number 14 using ehci-pci
[23778.977181] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3121,
bcdDevice= 0.01
[23778.977187] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[23778.979770] usb 1-1.1: firmware: direct-loading firmware
ar3k/AthrBT_0x31010000.dfu
[23779.024339] usb 1-1.1: firmware: direct-loading firmware
ar3k/ramps_0x31010000_40.dfu
[23779.106161] usb 1-1.1: USB disconnect, device number 14
[23779.331854] usb 1-1.1: new full-speed USB device number 15 using ehci-pci
[23780.875858] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[23780.888597] ata3.00: configured for UDMA/133
[23781.018329] RTL8211E Gigabit Ethernet r8169-e00:00: attached PHY driver
[RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-e00:00, irq=IGNORE)
[23781.262443] r8169 0000:0e:00.0 eno1: Link is Down
[23783.366015] wlo1: authenticate with 30:b5:c2:aa:a2:88
[23783.383068] wlo1: send auth to 30:b5:c2:aa:a2:88 (try 1/3)
[23783.385118] wlo1: authenticated
[23783.391797] wlo1: associate with 30:b5:c2:aa:a2:88 (try 1/3)
[23783.396112] wlo1: RX AssocResp from 30:b5:c2:aa:a2:88 (capab=0x411 status=0
aid=2)
[23783.396291] wlo1: associated
[23783.396883] ath: EEPROM regdomain: 0x80bf
[23783.396884] ath: EEPROM indicates we should expect a country code
[23783.396885] ath: doing EEPROM country->regdmn map search
[23783.396886] ath: country maps to regdmn code: 0x37
[23783.396888] ath: Country alpha2 being used: HR
[23783.396889] ath: Regpair used: 0x37
[23783.396891] ath: regdomain 0x80bf dynamically updated by country element
[23783.809424] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[23784.516876] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3121,
bcdDevice= 0.02
[23784.516881] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
** Model information
sys_vendor: Hewlett-Packard
product_name: HP 2000 Notebook PC
product_version: 088F130000005910000600000
chassis_vendor: Hewlett-Packard
chassis_version: Chassis Version
bios_vendor: Insyde
bios_version: F.45
board_vendor: Hewlett-Packard
board_name: 1855
board_version: 64.2A
** Loaded modules:
udp_diag
tcp_diag
inet_diag
rfcomm
ccm
cmac
algif_hash
algif_skcipher
af_alg
bnep
ath3k
uvcvideo
btusb
btrtl
btbcm
videobuf2_vmalloc
videobuf2_memops
btintel
videobuf2_v4l2
bluetooth
videobuf2_common
videodev
mc
jitterentropy_rng
ctr
drbg
ansi_cprng
ecdh_generic
ecc
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
ledtrig_audio
nls_ascii
snd_hda_intel
snd_intel_dspcfg
nls_cp437
ath9k
intel_rapl_msr
soundwire_intel
intel_rapl_common
vfat
ath9k_common
soundwire_generic_allocation
fat
snd_soc_core
ath9k_hw
x86_pkg_temp_thermal
intel_powerclamp
snd_compress
coretemp
soundwire_cadence
ath
kvm_intel
snd_hda_codec
mei_hdcp
mac80211
kvm
snd_hda_core
snd_hwdep
irqbypass
soundwire_bus
cfg80211
rapl
intel_cstate
intel_uncore
snd_pcm
hp_wmi
sparse_keymap
joydev
iTCO_wdt
snd_timer
intel_pmc_bxt
ip6t_REJECT
iTCO_vendor_support
nf_reject_ipv6
efi_pstore
wmi_bmof
at24
serio_raw
pcspkr
snd
rfkill
sg
libarc4
soundcore
watchdog
mei_me
xt_hl
mei
ip6_tables
evdev
ac
hp_wireless
ip6t_rt
ipt_REJECT
nf_reject_ipv4
nft_limit
xt_limit
xt_addrtype
xt_tcpudp
xt_conntrack
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
nft_compat
nft_counter
nf_tables
parport_pc
libcrc32c
nfnetlink
ppdev
lp
parport
fuse
configfs
efivarfs
ip_tables
x_tables
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
ecb
aes_generic
libaes
crypto_simd
glue_helper
xts
dm_crypt
dm_mod
hid_logitech_hidpp
hid_logitech_dj
hid_generic
usbhid
hid
sd_mod
t10_pi
crc_t10dif
crct10dif_generic
i915
radeon
rtsx_pci_sdmmc
mmc_core
ahci
libahci
crct10dif_pclmul
crct10dif_common
crc32_pclmul
libata
ttm
crc32c_intel
i2c_algo_bit
scsi_mod
psmouse
ghash_clmulni_intel
drm_kms_helper
r8169
realtek
ehci_pci
cryptd
mdio_devres
libphy
cec
ehci_hcd
i2c_i801
drm
i2c_smbus
usbcore
lpc_ich
rtsx_pci
wmi
fan
usb_common
battery
video
button
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: Hewlett-Packard Company 3rd Gen Core processor DRAM
Controller [103c:1855]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
I/O behind bridge: 00004000-00004fff [size=4K]
Memory behind bridge: c2000000-c2ffffff [size=16M]
Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff
[size=256M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company 3rd Gen Core processor Graphics
Controller [103c:1855]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at c3000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5000 [size=64]
Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family MEI
Controller [103c:1855]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at c3604000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family
USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family USB
Enhanced Host Controller [103c:1855]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c3609000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family
High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family High
Definition Audio Controller [103c:1855]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 34
Region 0: Memory at c3600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI
Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: c3500000-c35fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 26
Bus: primary=00, secondary=08, subordinate=0d, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: c1000000-c1ffffff [size=16M]
Prefetchable memory behind bridge: 00000000c0000000-00000000c0ffffff
[size=16M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C216 Chipset Family PCI
Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 27
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: 00000000c3400000-00000000c34fffff
[size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family
USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family USB
Enhanced Host Controller [103c:1855]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at c3608000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM75 Express Chipset LPC
Controller [8086:1e5d] (rev 04)
Subsystem: Hewlett-Packard Company HM75 Express Chipset LPC Controller
[103c:1855]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company 7 Series Chipset Family 6-port SATA
Controller [AHCI mode] [103c:1855]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: I/O ports at 5088 [size=8]
Region 1: I/O ports at 5094 [size=4]
Region 2: I/O ports at 5080 [size=8]
Region 3: I/O ports at 5090 [size=4]
Region 4: I/O ports at 5060 [size=32]
Region 5: Memory at c3607000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C216 Chipset Family SMBus
Controller [8086:1e22] (rev 04)
Subsystem: Hewlett-Packard Company 7 Series/C216 Chipset Family SMBus
Controller [103c:1855]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 21
Region 0: Memory at c3605000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 5040 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (prog-if 00 [VGA
controller])
DeviceName: ATI SEYMOR XT
Subsystem: Hewlett-Packard Company Radeon HD 7450M [103c:1855]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at c2000000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 4000 [size=256]
Expansion ROM at c2020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon
07:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless
Network Adapter [168c:0036] (rev 01)
DeviceName: Qualcomm Atheros QCA9565 802.11b/g/n 1x1 WiFi
Subsystem: Hewlett-Packard Company QCA9565 / AR9565 Wireless Network
Adapter [103c:217f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c3500000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at c3580000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI
Express Card Reader [10ec:5229] (rev 01)
Subsystem: Hewlett-Packard Company RTS5229 PCI Express Card Reader
[103c:1855]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
0e:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)
DeviceName: Hanksville Gbe Lan Connection
Subsystem: Hewlett-Packard Company RTL8111/8168/8411 PCI Express
Gigabit Ethernet Controller [103c:1855]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at c3404000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at c3400000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
** USB devices:
Bus 002 Device 003: ID 064e:e263 Suyin Corp. HP TrueVision HD Integrated Webcam
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046d:c534 Logitech, Inc. Unifying Receiver
Bus 001 Device 015: ID 0cf3:3121 Qualcomm Atheros Communications
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 11.0
APT prefers testing-security
APT policy: (500, 'testing-security'), (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.10.0-7-amd64 (SMP w/4 CPU threads)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-7-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.140
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-7-amd64 recommends:
ii apparmor 2.13.6-10
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-7-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.04-19
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-7-amd64 is related to:
ii firmware-amd-graphics 20210315-2
ii firmware-atheros 20210315-2
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
ii firmware-misc-nonfree 20210315-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20210315-2
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
