Package: src:linux
Version: 5.10.40-1
Severity: normal
Tags: upstream
X-Debbugs-Cc: nos...@kota.moe
After updating from linux-image-5.10.0-6-amd64, jackd now fails to sync to my
DICE-compatible firewire audio interface (Profire 610), with the following
error messages (full log attached):
> $ jackd -d firewire -v
> jackdmp 1.9.12
> ...snip...
> 00301056761: Warning (StreamProcessorManager.cpp)[ 913] alignReceivedStreams:
xrun while aligning streams...
> 00301056793: Error (StreamProcessorManager.cpp)[ 877] syncStartAll: Could not
align streams...
> 00301056829: Fatal (StreamProcessorManager.cpp)[1025] start: Could not
syncStartAll...
> 00301400626: Warning (TimestampedBuffer.cpp)[ 248] calculateRate: (0x1fa5a20)
rate ( 708.18713) more that 10% off nominal (rate= 512.00000, diff=
5665.497, update_period=8)
> 00301416642: Warning (TimestampedBuffer.cpp)[ 248] calculateRate: (0x1fa5a20)
rate ( 686.49011) more that 10% off nominal (rate= 512.00000, diff=
5491.921, update_period=8)
> 00301416925: Warning (devicemanager.cpp)[ 925] startStreaming: Failed to
start SPM!
> firewire ERR: Could not start streaming threads
> Cannot start driver
> JackServer::Start() failed with -1
> 00301424329: Warning (ieee1394service.cpp)[1509] freeIsoChannel: Channel 1
not registered
> 00301424360: Error (dice_avdevice.cpp)[1440] startstopStreamByIndex: Could
not deallocate iso channel for SP 1 (ARX 0)
> 00301424397: Warning (devicemanager.cpp)[ 959] stopStreamingOnDevice: Could
not stop stream 1 of device 0x1f6e600
> 00301424406: Warning (devicemanager.cpp)[ 931] startStreaming: Could not stop
streaming on device 0x1f6e600!
> 00301424429: Fatal (ffado.cpp)[ 220] ffado_streaming_start: Could not start
the streaming system
> Failed to start server
> no message buffer overruns
Additionally, I also tried using the snd-dice driver to expose the audio
interface directly in ALSA. While the interface did appear and was usable
there, all inputs came out of my speakers highly distorted, with channels
bleeding into each other - practically unusable.
I've reproduced the issue on upstream kernel version v5.13-rc5+
(ad347abe4a9876b1f65f408ab467137e88f77eb4), and bisected the first bad commit
down to 85a5a6875ca93dc4efbf20df942ba41d27a917e3.
To double check commit 85a5a6875ca93dc4efbf20df942ba41d27a917e3 was indeed the
issue, I built the latest v5.10 kernel v5.10.43 with the commit reverted, and
indeed the issue went away.
Unfortunately, the reverse patch would not apply to v5.13-rc5+, since it seems
like the file has changed too much.
-- Package-specific info:
** Version:
Linux version 5.10.0-7-amd64 (debian-ker...@lists.debian.org) (gcc-10 (Debian
10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP
Debian 5.10.40-1 (2021-05-28)
** Command line:
placeholder root=UUID=909c3fad-bc84-4b62-8090-ad1ae46f925e ro
rootflags=subvol=@root modprobe.blacklist=vboxdrv
** Tainted: OE (12288)
* externally-built ("out-of-tree") module was loaded
* unsigned module was loaded
** Kernel log:
[ 9.729259] BTRFS info (device dm-0): devid 1 device path /dev/dm-0 changed
to /dev/mapper/home-dom0 scanned by systemd-udevd (510)
[ 9.730321] BTRFS info (device dm-0): devid 2 device path /dev/dm-6 changed
to /dev/mapper/home-dom0--mirror scanned by systemd-udevd (500)
[ 9.775119] BTRFS info (device sdc1): disk space caching is enabled
[ 9.848478] audit: type=1400 audit(1623526949.255:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-senddoc"
pid=795 comm="apparmor_parser"
[ 9.848481] audit: type=1400 audit(1623526949.255:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport"
pid=796 comm="apparmor_parser"
[ 9.848795] audit: type=1400 audit(1623526949.255:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=797
comm="apparmor_parser"
[ 9.852711] audit: type=1400 audit(1623526949.255:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_filter" pid=797
comm="apparmor_parser"
[ 9.852715] audit: type=1400 audit(1623526949.255:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="man_groff" pid=797
comm="apparmor_parser"
[ 9.852717] audit: type=1400 audit(1623526949.255:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=792
comm="apparmor_parser"
[ 9.852720] audit: type=1400 audit(1623526949.255:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="libreoffice-oopslash"
pid=794 comm="apparmor_parser"
[ 9.852722] audit: type=1400 audit(1623526949.255:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/redshift" pid=799
comm="apparmor_parser"
[ 9.852724] audit: type=1400 audit(1623526949.259:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=798
comm="apparmor_parser"
[ 9.852726] audit: type=1400 audit(1623526949.259:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod"
pid=798 comm="apparmor_parser"
[ 9.874997] snd_hda_intel 0000:00:1f.3: DSP detected with PCI
class/subclass/prog-if info 0x040100
[ 9.875871] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 9.876814] xen: registering gsi 16 triggering 0 polarity 1
[ 9.876818] Already setup the GSI :16
[ 9.877808] xen: registering gsi 17 triggering 0 polarity 1
[ 9.877811] Already setup the GSI :17
[ 9.878683] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 9.880088] snd_hda_intel 0000:04:00.1: enabling device (0000 -> 0002)
[ 9.880983] xen: registering gsi 18 triggering 0 polarity 1
[ 9.880986] Already setup the GSI :18
[ 9.881849] snd_hda_intel 0000:04:00.1: Force to non-snoop mode
[ 9.891969] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops
amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 9.911941] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready
0x00000000
[ 9.914193] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150:
line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 9.915701] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0
(0x0/0x0/0x0/0x0/0x0)
[ 9.916740] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x1b/0x0/0x0/0x0/0x0)
[ 9.917756] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 9.917757] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
[ 9.917758] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 9.917769] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 9.922580] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 9.922581] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 9.944026] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[ 9.945699] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 9.946809] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 9.948297] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 9.949272] input: HDA Intel PCH Line Out Front as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 9.950837] input: HDA Intel PCH Line Out Surround as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[ 9.952308] input: HDA Intel PCH Line Out CLFE as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[ 9.955290] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[ 10.018808] BTRFS info (device sdc1): bdev /dev/sdb1 errs: wr 518, rd 44,
flush 0, corrupt 0, gen 0
[ 10.099254] i2c-tiny-usb 1-8:1.0: version 2.01 found at bus 001 address 005
[ 10.100337] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 10.100453] input: HDA ATI HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 10.100492] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card2/input28
[ 10.100522] input: HDA ATI HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 10.100640] i2c i2c-8: connected i2c-tiny-usb device
[ 10.100662] usbcore: registered new interface driver i2c-tiny-usb
[ 10.104980] input: HDA ATI HDMI HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 10.109232] input: HDA ATI HDMI HDMI/DP,pcm=7 as
/devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card2/input29
[ 10.109274] input: HDA ATI HDMI HDMI/DP,pcm=8 as
/devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card2/input30
[ 10.109355] input: HDA ATI HDMI HDMI/DP,pcm=9 as
/devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card2/input31
[ 10.109406] input: HDA ATI HDMI HDMI/DP,pcm=10 as
/devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card2/input32
[ 10.109461] input: HDA ATI HDMI HDMI/DP,pcm=11 as
/devices/pci0000:00/0000:00:01.1/0000:02:00.0/0000:03:00.0/0000:04:00.1/sound/card2/input33
[ 10.164712] xen:xen_evtchn: Event-channel device installed
[ 10.177246] max6697: loading out-of-tree module taints kernel.
[ 10.178543] max6697: module verification failed: signature and/or required
key missing - tainting kernel
[ 10.181391] xen_acpi_processor: Uploading Xen processor PM info
[ 10.202111] i2c i2c-8: new_device: Instantiated device max6698 at 0x1c
[ 10.600517] 8021q: 802.1Q VLAN Support v1.8
[ 10.600532] 8021q: adding VLAN 0 to HW filter on device enp13s0
[ 10.810727] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 11.534430] firewire_core 0000:06:00.0: created device fw1: GUID
000d6c0404400002, S400
[ 13.041059] rfkill: input handler disabled
[ 13.426952] igb 0000:0d:00.0 enp13s0: igb: enp13s0 NIC Link is Up 1000 Mbps
Full Duplex, Flow Control: RX
[ 13.538675] IPv6: ADDRCONF(NETDEV_CHANGE): enp13s0: link becomes ready
[ 13.538945] IPv6: ADDRCONF(NETDEV_CHANGE): enp13s0.100: link becomes ready
[ 13.539142] IPv6: ADDRCONF(NETDEV_CHANGE): enp13s0.200: link becomes ready
[ 13.639676] bridge0: port 1(enp13s0.200) entered blocking state
[ 13.639683] bridge0: port 1(enp13s0.200) entered disabled state
[ 13.639758] device enp13s0.200 entered promiscuous mode
[ 13.639762] device enp13s0 entered promiscuous mode
[ 15.317216] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: Rx/Tx
[ 15.317311] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[ 15.417678] bridge0: port 2(enp0s31f6) entered blocking state
[ 15.417690] bridge0: port 2(enp0s31f6) entered disabled state
[ 15.417826] device enp0s31f6 entered promiscuous mode
[ 15.417880] bridge0: port 2(enp0s31f6) entered blocking state
[ 15.417888] bridge0: port 2(enp0s31f6) entered forwarding state
[ 15.417981] IPv6: ADDRCONF(NETDEV_CHANGE): bridge0: link becomes ready
[ 15.431650] e1000e 0000:00:1f.6: Interrupt Throttle Rate off
[ 15.517043] e1000e 0000:00:1f.6: Some CPU C-states have been disabled in
order to enable jumbo frames
[ 15.559688] bridge0: port 2(enp0s31f6) entered disabled state
[ 17.139250] igb 0000:0d:00.0 enp13s0: igb: enp13s0 NIC Link is Up 1000 Mbps
Full Duplex, Flow Control: RX
[ 17.247108] IPv6: ADDRCONF(NETDEV_CHANGE): enp13s0.100: link becomes ready
[ 17.247236] bridge0: port 1(enp13s0.200) entered blocking state
[ 17.247253] bridge0: port 1(enp13s0.200) entered forwarding state
[ 18.194528] rfkill: input handler enabled
[ 19.675101] rfkill: input handler disabled
[ 21.566905] e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full
Duplex, Flow Control: Rx/Tx
[ 21.566980] bridge0: port 2(enp0s31f6) entered blocking state
[ 21.566983] bridge0: port 2(enp0s31f6) entered forwarding state
[ 22.920547] vboxdrv: Found 8 processor cores
[ 22.946646] vboxdrv: TSC mode is Invariant, tentative frequency 3408089305 Hz
[ 22.946652] vboxdrv: Successfully loaded version 6.1.22_Debian (interface
0x00300000)
[ 22.957168] VBoxNetFlt: Successfully started.
[ 22.966903] VBoxNetAdp: Successfully started.
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: Z170X-UD5
product_version: To be filled by O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F4
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z170X-UD5-CF
board_version: x.x
** Loaded modules:
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
intel_rapl_msr
intel_rapl_common
bridge
8021q
garp
stp
mrp
llc
rfkill
xen_acpi_processor
max6697(OE)
xen_gntdev
xen_evtchn
xenfs
xen_privcmd
intel_powerclamp
i2c_tiny_usb
snd_hda_codec_realtek
snd_hda_codec_generic
ledtrig_audio
snd_hda_codec_hdmi
snd_hda_intel
snd_intel_dspcfg
soundwire_intel
soundwire_generic_allocation
mei_hdcp
snd_soc_core
snd_compress
soundwire_cadence
snd_hda_codec
nls_ascii
nls_cp437
snd_hda_core
vfat
snd_hwdep
fat
iTCO_wdt
soundwire_bus
intel_pmc_bxt
snd_pcm
joydev
iTCO_vendor_support
intel_wmi_thunderbolt
pcspkr
serio_raw
efi_pstore
snd_timer
mei_me
snd
watchdog
ee1004
mei
sg
intel_pch_thermal
soundcore
evdev
intel_pmc_core
it87
hwmon_vid
fuse
configfs
efivarfs
ip_tables
x_tables
autofs4
btrfs
blake2b_generic
raid1
dm_raid
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
md_mod
xor
hid_generic
usbhid
hid
raid6_pq
libcrc32c
crc32c_generic
dm_mod
sr_mod
cdrom
sd_mod
amdgpu
crc32_pclmul
crc32c_intel
xen_pciback
ghash_clmulni_intel
gpu_sched
ttm
drm_kms_helper
xhci_pci
psmouse
nvme
igb
ahci
aesni_intel
mxm_wmi
cec
e1000e
libaes
crypto_simd
cryptd
xhci_hcd
glue_helper
libahci
nvme_core
dca
libata
drm
t10_pi
crc_t10dif
crct10dif_generic
usbcore
i2c_i801
firewire_ohci
ptp
scsi_mod
i2c_smbus
crct10dif_pclmul
pps_core
crct10dif_common
i2c_algo_bit
firewire_core
crc_itu_t
usb_common
fan
wmi
video
button
** Network interface configuration:
*** /etc/network/interfaces:
source-directory /etc/network/interfaces.d
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp13s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc mq state UP group
default qlen 1000
link/ether 40:8d:5c:b4:52:e4 brd ff:ff:ff:ff:ff:ff
inet6 fe80::428d:5cff:feb4:52e4/64 scope link
valid_lft forever preferred_lft forever
3: enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc pfifo_fast
master bridge0 state UP group default qlen 1000
link/ether 40:8d:5c:b4:52:e2 brd ff:ff:ff:ff:ff:ff
4: enp13s0.100@enp13s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc
noqueue state UP group default qlen 1000
link/ether 40:8d:5c:b4:52:e4 brd ff:ff:ff:ff:ff:ff
inet 10.10.0.2/16 brd 10.10.255.255 scope global dynamic noprefixroute
enp13s0.100
valid_lft 6983sec preferred_lft 6983sec
inet6 fd84:75d2:975c:10:ba93:46f0:b21a:8ac5/64 scope global dynamic
noprefixroute
valid_lft 2591935sec preferred_lft 604735sec
inet6 2404:bf40:8181:10:10e1:990c:287c:b278/64 scope global dynamic
noprefixroute
valid_lft 86396sec preferred_lft 14396sec
inet6 fe80::64aa:1b00:f0f5:ff2b/64 scope link noprefixroute
valid_lft forever preferred_lft forever
5: bridge0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc noqueue state UP
group default qlen 1000
link/ether 42:94:d1:cc:80:e3 brd ff:ff:ff:ff:ff:ff
inet 10.20.1.58/16 brd 10.20.255.255 scope global dynamic noprefixroute
bridge0
valid_lft 5238sec preferred_lft 5238sec
inet6 fd84:75d2:975c:20:cf47:30c5:772e:82a5/64 scope global dynamic
noprefixroute
valid_lft 2591857sec preferred_lft 604657sec
inet6 2404:bf40:8181:20:4206:cfeb:365e:302e/64 scope global dynamic
noprefixroute
valid_lft 86393sec preferred_lft 14393sec
inet6 fe80::358e:7ffc:1c05:bbd6/64 scope link noprefixroute
valid_lft forever preferred_lft forever
6: enp13s0.200@enp13s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 qdisc
noqueue master bridge0 state UP group default qlen 1000
link/ether 40:8d:5c:b4:52:e4 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 3894 50 0 0 0 0 0 0 3894
50 0 0 0 0 0 0
enp13s0: 1055704 1815 0 8 0 0 0 1015 188116
963 0 0 0 0 0 0
enp0s31f6: 0 0 0 0 0 0 0 0 332159
735 0 0 0 0 0 0
enp13s0.100: 11163 90 0 0 0 0 0 78 12114
82 0 0 0 0 0 0
bridge0: 991140 1468 0 0 0 0 0 740 172538
844 0 0 0 0 0 0
enp13s0.200: 991140 1468 0 0 0 0 0 740 172358
842 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
544 total packets received
5 with invalid addresses
0 forwarded
0 incoming packets discarded
361 incoming packets delivered
390 requests sent out
123 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
38 active connection openings
0 passive connection openings
16 failed connection attempts
0 connection resets received
0 connections established
664 segments received
704 segments sent out
0 segments retransmitted
2 bad segments received
50 resets sent
Udp:
126 packets received
0 packets to unknown port received
0 packet receive errors
126 packets sent
0 receive buffer errors
0 send buffer errors
UdpLite:
TcpExt:
4 TCP sockets finished time wait in fast timer
6 delayed acks sent
376 packet headers predicted
70 acknowledgments not containing data payload received
66 predicted acknowledgments
Detected reordering 3 times using SACK
14 connections reset due to unexpected data
TCPSackShiftFallback: 3
TCPRcvCoalesce: 72
TCPChallengeACK: 2
TCPSYNChallenge: 2
TCPOrigDataSent: 199
TCPDelivered: 217
IpExt:
InMcastPkts: 52
OutMcastPkts: 58
InOctets: 328992
OutOctets: 44848
InMcastOctets: 7590
OutMcastOctets: 7830
InNoECTPkts: 573
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th
Gen Core Processor Host Bridge/DRAM Registers [8086:191f] (rev 07)
Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v5/E3-1500 v5/6th
Gen Core Processor Host Bridge/DRAM Registers [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 6th-10th Gen Core Processor PCIe
Controller (x16) [8086:1901] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 170
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff [size=4K]
Memory behind bridge: dfe00000-dfefffff [size=1M]
Prefetchable memory behind bridge: 00000000c0000000-00000000d01fffff
[size=258M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen
Core Processor PCIe Controller (x8) [8086:1905] (rev 07) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 171
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: df600000-df7fffff [size=2M]
Prefetchable memory behind bridge: 00000000a0000000-00000000b01fffff
[size=258M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 100 Series/C230 Series Chipset
Family USB 3.0 xHCI Controller [8086:a12f] (rev 31) (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset
Family USB 3.0 xHCI Controller [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 206
Region 0: Memory at dff30000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:14.2 Signal processing controller [1180]: Intel Corporation 100 Series/C230
Series Chipset Family Thermal Subsystem [8086:a131] (rev 31)
Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset
Family Thermal Subsystem [1458:8888]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at dff4e000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
00:16.0 Communication controller [0780]: Intel Corporation 100 Series/C230
Series Chipset Family MEI Controller #1 [8086:a13a] (rev 31)
Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset
Family MEI Controller [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 218
Region 0: Memory at dff4d000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:17.0 SATA controller [0106]: Intel Corporation
Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode]
[8086:a102] (rev 31) (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd
Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode]
[1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 190
Region 0: Memory at dff48000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at dff4c000 (32-bit, non-prefetchable) [size=256]
Region 2: I/O ports at f050 [size=8]
Region 3: I/O ports at f040 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at dff4b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1b.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset
Family PCI Express Root Port #17 [8086:a167] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 172
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.3 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset
Family PCI Express Root Port #20 [8086:a16a] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 173
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: dfd00000-dfdfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset
Family PCI Express Root Port #1 [8086:a110] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 174
Bus: primary=00, secondary=07, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00003fff [size=8K]
Memory behind bridge: dfc00000-dfcfffff [size=1M]
Prefetchable memory behind bridge: 0000000078800000-0000000078dfffff
[size=6M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset
Family PCI Express Root Port #5 [8086:a114] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 175
Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
I/O behind bridge: 0000c000-0000cfff [size=4K]
Memory behind bridge: dfb00000-dfbfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset
Family PCI Express Root Port #6 [8086:a115] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 176
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
I/O behind bridge: 0000b000-0000bfff [size=4K]
Memory behind bridge: dfa00000-dfafffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset
Family PCI Express Root Port #9 [8086:a118] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 177
Bus: primary=00, secondary=0f, subordinate=0f, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: df900000-df9fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.4 PCI bridge [0604]: Intel Corporation 100 Series/C230 Series Chipset
Family PCI Express Root Port #13 [8086:a11c] (rev f1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 178
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 0000a000-0000afff [size=4K]
Memory behind bridge: df800000-df8fffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation Z170 Chipset LPC/eSPI Controller
[8086:a145] (rev 31)
Subsystem: Gigabyte Technology Co., Ltd Z170 Chipset LPC/eSPI
Controller [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 Memory controller [0580]: Intel Corporation 100 Series/C230 Series
Chipset Family Power Management Controller [8086:a121] (rev 31)
Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset
Family Power Management Controller [1458:5001]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Region 0: Memory at dff44000 (32-bit, non-prefetchable) [disabled]
[size=16K]
00:1f.3 Multimedia audio controller [0401]: Intel Corporation 100 Series/C230
Series Chipset Family HD Audio Controller [8086:a170] (rev 31)
Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset
Family HD Audio Controller [1458:a182]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 219
Region 0: Memory at dff40000 (64-bit, non-prefetchable) [size=16K]
Region 4: Memory at dff20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1f.4 SMBus [0c05]: Intel Corporation 100 Series/C230 Series Chipset Family
SMBus [8086:a123] (rev 31)
Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset
Family SMBus [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dff4a000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (2)
I219-V [8086:15b8] (rev 31)
Subsystem: Gigabyte Technology Co., Ltd Ethernet Connection (2) I219-V
[1458:e000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 189
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] [1002:67df] (rev
c7) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Radeon RX 480
Gaming X 8GB [1462:3413]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 217
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at dfe00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: amdgpu
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere
HDMI Audio [Radeon RX 470/480 / 570/580/590] [1002:aaf0]
Subsystem: Micro-Star International Co., Ltd. [MSI] Ellesmere HDMI
Audio [Radeon RX 470/480 / 570/580/590] [1462:aaf0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 220
Region 0: Memory at dfe60000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL
Upstream Port of PCI Express Switch [1002:1478] (rev c1) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 179
Region 0: Memory at df700000 (32-bit, non-prefetchable) [size=16K]
Bus: primary=02, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: df600000-df6fffff [size=1M]
Prefetchable memory behind bridge: 00000000a0000000-00000000b01fffff
[size=258M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
03:00.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 XL
Downstream Port of PCI Express Switch [1002:1479] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 180
Bus: primary=03, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff [size=4K]
Memory behind bridge: df600000-df6fffff [size=1M]
Prefetchable memory behind bridge: 00000000a0000000-00000000b01fffff
[size=258M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
04:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
[AMD/ATI] Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1002:731f] (rev
c1) (prog-if 00 [VGA controller])
Subsystem: Sapphire Technology Limited Navi 10 [Radeon RX 5600 OEM/5600
XT / 5700/5700 XT] [1da2:e409]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at d000 [size=256]
Region 5: Memory at df600000 (32-bit, non-prefetchable) [size=512K]
Expansion ROM at df680000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: pciback
Kernel modules: amdgpu
04:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10
HDMI Audio [1002:ab38]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 HDMI Audio
[1002:ab38]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 221
Region 0: Memory at df6a0000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
06:00.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW533 [TrueFire] PCIe
1394a Controller [11c1:5903] (rev 08) (prog-if 10 [OHCI])
Subsystem: Device [1b5b:803a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 188
Region 0: Memory at dfd00000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci
07:00.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge
[Alpine Ridge 4C 2015] [8086:1578] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 181
Bus: primary=07, secondary=08, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00003fff [size=8K]
Memory behind bridge: dfc00000-dfcfffff [size=1M]
Prefetchable memory behind bridge: 0000000078800000-0000000078dfffff
[size=6M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
08:00.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge
[Alpine Ridge 4C 2015] [8086:1578] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 182
Bus: primary=08, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
08:01.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge
[Alpine Ridge 4C 2015] [8086:1578] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 183
Bus: primary=08, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 00002000-00002fff [size=4K]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: 0000000078800000-00000000789fffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
08:02.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge
[Alpine Ridge 4C 2015] [8086:1578] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 184
Bus: primary=08, secondary=0b, subordinate=0b, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: dfc00000-dfcfffff [size=1M]
Prefetchable memory behind bridge: [disabled]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
08:04.0 PCI bridge [0604]: Intel Corporation DSL6540 Thunderbolt 3 Bridge
[Alpine Ridge 4C 2015] [8086:1578] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 185
Bus: primary=08, secondary=0c, subordinate=0c, sec-latency=0
I/O behind bridge: 00003000-00003fff [size=4K]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: 0000000078a00000-0000000078bfffff
[size=2M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
0b:00.0 USB controller [0c03]: Intel Corporation DSL6540 USB 3.1 Controller
[Alpine Ridge] [8086:15b6] (prog-if 30 [XHCI])
Subsystem: Device [2222:1111]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 215
Region 0: Memory at dfc00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
0d:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network
Connection [8086:1539] (rev 03)
Subsystem: Gigabyte Technology Co., Ltd I211 Gigabit Network Connection
[1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at dfb00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c000 [size=32]
Region 3: Memory at dfb20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: igb
Kernel modules: igb
0e:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA
Controller [1b21:0612] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASMedia Technology Inc. ASM1062 Serial ATA Controller
[1b21:1062]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 216
Region 0: I/O ports at b050 [size=8]
Region 1: I/O ports at b040 [size=4]
Region 2: I/O ports at b030 [size=8]
Region 3: I/O ports at b020 [size=4]
Region 4: I/O ports at b000 [size=32]
Region 5: Memory at dfa10000 (32-bit, non-prefetchable) [size=512]
Expansion ROM at dfa00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
0f:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe
SSD Controller SM981/PM981/PM983 [144d:a808] (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller
SM981/PM981/PM983 [144d:a801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at df900000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
10:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe
SSD Controller SM951/PM951 [144d:a802] (rev 01) (prog-if 02 [NVM Express])
Subsystem: Samsung Electronics Co Ltd PM963 2.5" NVMe PCIe SSD
[144d:a801]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
NUMA node: 0
Region 0: Memory at df810000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at a000 [size=256]
Expansion ROM at df800000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: nvme
Kernel modules: nvme
** USB devices:
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 05e3:0620 Genesys Logic, Inc. USB3.2 Hub
Bus 002 Device 002: ID 05e3:0620 Genesys Logic, Inc. USB3.2 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0403:c631 Future Technology Devices International, Ltd
i2c-tiny-usb interface
Bus 001 Device 008: ID 046d:c24a Logitech, Inc. G600 Gaming Mouse
Bus 001 Device 006: ID 04d9:4545 Holtek Semiconductor, Inc. Keyboard [Diatec
Majestouch 2 Tenkeyless]
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 001 Device 004: ID 04d9:4545 Holtek Semiconductor, Inc. Keyboard [Diatec
Majestouch 2 Tenkeyless]
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. Hub
Bus 001 Device 007: ID 18d1:5026 Google Inc. hg_0005
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 11.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.10.0-7-amd64 (SMP w/8 CPU threads)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages linux-image-5.10.0-7-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.140
ii kmod 28-1
ii linux-base 4.6
Versions of packages linux-image-5.10.0-7-amd64 recommends:
ii apparmor 2.13.6-10
ii firmware-linux-free 20200122-1
Versions of packages linux-image-5.10.0-7-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-efi-amd64 2.04-18
pn linux-doc-5.10 <none>
Versions of packages linux-image-5.10.0-7-amd64 is related to:
ii firmware-amd-graphics 20210315-2
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20210315-2
ii firmware-misc-nonfree 20210315-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
ii xen-hypervisor-4.14-amd64 [xen-hypervisor] 4.14.1+11-gb0b734a8b3-1
-- no debconf information
no message buffer overruns
no message buffer overruns
no message buffer overruns
jackdmp 1.9.12
Copyright 2001-2005 Paul Davis and others.
Copyright 2004-2016 Grame.
Copyright 2016-2018 Filipe Coelho.
jackdmp comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK server starting in realtime mode with priority 10
self-connect-mode is "Don't restrict self connect requests"
1623528246631186: (ffado.cpp)[ 92] ffado_streaming_init: libffado 2.4.4 built
Jan 31 2021 14:13:24
01307382593: (dice_avdevice.cpp)[ 714] showDevice: DICE Parameter Space info:
01307382625: (dice_avdevice.cpp)[ 715] showDevice: Global : offset=0x0028
size=0360
01307382662: (dice_avdevice.cpp)[ 716] showDevice: TX : offset=0x0190
size=0568
01307382670: (dice_avdevice.cpp)[ 717] showDevice: nb= 1
size=0280
01307382720: (dice_avdevice.cpp)[ 718] showDevice: RX : offset=0x03C8
size=1128
01307382728: (dice_avdevice.cpp)[ 719] showDevice: nb= 1
size=0280
01307382742: (dice_avdevice.cpp)[ 720] showDevice: UNUSED1 : offset=0x0830
size=0016
01307382745: (dice_avdevice.cpp)[ 721] showDevice: UNUSED2 : offset=0x0000
size=0000
01307382767: (dice_avdevice.cpp)[ 723] showDevice: Global param space:
01307383976: (dice_avdevice.cpp)[ 726] showDevice: Owner :
0x00000000FFFF0000
01307385379: (dice_avdevice.cpp)[ 729] showDevice: Notification :
0x00000020
01307388518: (dice_avdevice.cpp)[ 732] showDevice: Nick name : FW610
01307389948: (dice_avdevice.cpp)[ 735] showDevice: Clock Select : 0x02
0x0C
01307391339: (dice_avdevice.cpp)[ 739] showDevice: Enable : false
01307392749: (dice_avdevice.cpp)[ 743] showDevice: Clock Status : locked
0x02
01307394185: (dice_avdevice.cpp)[ 747] showDevice: Extended Status :
0x00000000
01307395556: (dice_avdevice.cpp)[ 750] showDevice: Samplerate :
0x0000BB80 (48000)
01307396933: (dice_avdevice.cpp)[ 753] showDevice: Version :
0x01000400
01307398807: (dice_avdevice.cpp)[ 756] showDevice: Version :
0x01000400 (1.0.4.0)
01307400210: (dice_avdevice.cpp)[ 765] showDevice: Clock caps :
0x13F9007F
01307401977: (dice_avdevice.cpp)[ 768] showDevice: Clock sources :
01307402010: (dice_avdevice.cpp)[ 774] showDevice: SPDIF
01307402045: (dice_avdevice.cpp)[ 774] showDevice: AES34
01307402053: (dice_avdevice.cpp)[ 774] showDevice: AES56
01307402071: (dice_avdevice.cpp)[ 774] showDevice: TOS
01307402078: (dice_avdevice.cpp)[ 774] showDevice: AES_ANY
01307402091: (dice_avdevice.cpp)[ 774] showDevice: ADAT
01307402093: (dice_avdevice.cpp)[ 774] showDevice: ADAT_AUX
01307402109: (dice_avdevice.cpp)[ 774] showDevice: Word Clock
01307402111: (dice_avdevice.cpp)[ 774] showDevice: Unused
01307402123: (dice_avdevice.cpp)[ 774] showDevice: Unused
01307402125: (dice_avdevice.cpp)[ 774] showDevice: Unused
01307402137: (dice_avdevice.cpp)[ 774] showDevice: Unused
01307402140: (dice_avdevice.cpp)[ 774] showDevice: Internal
01307402152: (dice_avdevice.cpp)[ 777] showDevice: TX param space:
01307402155: (dice_avdevice.cpp)[ 778] showDevice: Nb of xmit : 1
01307402168: (dice_avdevice.cpp)[ 780] showDevice: Transmitter 0:
01307403427: (dice_avdevice.cpp)[ 783] showDevice: ISO channel : -1
01307404819: (dice_avdevice.cpp)[ 785] showDevice: ISO speed : 2
01307406217: (dice_avdevice.cpp)[ 788] showDevice: Nb audio channels : 6
01307408218: (dice_avdevice.cpp)[ 790] showDevice: Nb midi channels : 1
01307409628: (dice_avdevice.cpp)[ 793] showDevice: AC3 caps :
0x00000000
01307411051: (dice_avdevice.cpp)[ 795] showDevice: AC3 enable :
0x00000000
01307412708: (dice_avdevice.cpp)[ 798] showDevice: Channel names :
01307412758: (dice_avdevice.cpp)[ 803] showDevice: Mic-Line 1
01307412766: (dice_avdevice.cpp)[ 803] showDevice: Mic-Line 2
01307412785: (dice_avdevice.cpp)[ 803] showDevice: Line 3
01307412792: (dice_avdevice.cpp)[ 803] showDevice: Line 4
01307412804: (dice_avdevice.cpp)[ 803] showDevice: SPDIF L
01307412806: (dice_avdevice.cpp)[ 803] showDevice: SPDIF R
01307412819: (dice_avdevice.cpp)[ 807] showDevice: RX param space:
01307412821: (dice_avdevice.cpp)[ 808] showDevice: Nb of recv : 1
01307412834: (dice_avdevice.cpp)[ 810] showDevice: Receiver 0:
01307414144: (dice_avdevice.cpp)[ 813] showDevice: ISO channel : 1
01307415574: (dice_avdevice.cpp)[ 815] showDevice: Sequence start : 0
01307416924: (dice_avdevice.cpp)[ 818] showDevice: Nb audio channels : 10
01307418791: (dice_avdevice.cpp)[ 820] showDevice: Nb midi channels : 1
01307420235: (dice_avdevice.cpp)[ 823] showDevice: AC3 caps :
0x00000000
01307421652: (dice_avdevice.cpp)[ 825] showDevice: AC3 enable :
0x00000000
01307423374: (dice_avdevice.cpp)[ 828] showDevice: Channel names :
01307423431: (dice_avdevice.cpp)[ 833] showDevice: Line 1
01307423439: (dice_avdevice.cpp)[ 833] showDevice: Line 2
01307423458: (dice_avdevice.cpp)[ 833] showDevice: Line 3
01307423464: (dice_avdevice.cpp)[ 833] showDevice: Line 4
01307423481: (dice_avdevice.cpp)[ 833] showDevice: Line 5
01307423487: (dice_avdevice.cpp)[ 833] showDevice: Line 6
01307423504: (dice_avdevice.cpp)[ 833] showDevice: Line 7
01307423510: (dice_avdevice.cpp)[ 833] showDevice: Line 8
01307423530: (dice_avdevice.cpp)[ 833] showDevice: SPDIF L
01307423533: (dice_avdevice.cpp)[ 833] showDevice: SPDIF R
01307452338: (dice_avdevice.cpp)[ 324] setSamplingFrequency: Setting sample
rate: 48000
01307490754: [31mWarning (dice_avdevice.cpp)[ 933] prepareSP: The audio
channel name vector is incorrect, using default names
[0m01307528948: [31mWarning (dice_avdevice.cpp)[ 933] prepareSP: The audio
channel name vector is incorrect, using default names
[0m01307547799: [31mWarning (StreamProcessor.cpp)[1713] updateState: ignoring
identity state update from/to ePS_Created
[0m01307547899: [31mWarning (StreamProcessor.cpp)[1713] updateState: ignoring
identity state update from/to ePS_Created
[0m01307552199: [31mWarning (dice_avdevice.cpp)[1382] startstopStreamByIndex:
ISO_CHANNEL register != 0xFFFFFFFF (=0x00000001) for ARX 0
[0m01307923791: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12622) more that 10% off nominal (rate= 512.00000, diff=
6977.010, update_period=8)
[0m01307939791: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12622) more that 10% off nominal (rate= 512.00000, diff=
6977.010, update_period=8)
[0m01307955790: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12622) more that 10% off nominal (rate= 512.00000, diff=
6977.010, update_period=8)
[0m01307971792: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12714) more that 10% off nominal (rate= 512.00000, diff=
6977.017, update_period=8)
[0m01307987780: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12622) more that 10% off nominal (rate= 512.00000, diff=
6977.010, update_period=8)
[0m01308003792: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12622) more that 10% off nominal (rate= 512.00000, diff=
6977.010, update_period=8)
[0m01308019801: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12622) more that 10% off nominal (rate= 512.00000, diff=
6977.010, update_period=8)
[0m01308035779: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12622) more that 10% off nominal (rate= 512.00000, diff=
6977.010, update_period=8)
[0m01308051779: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12622) more that 10% off nominal (rate= 512.00000, diff=
6977.010, update_period=8)
[0m01308067844: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12622) more that 10% off nominal (rate= 512.00000, diff=
6977.010, update_period=8)
[0m01308083714: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 872.12714) more that 10% off nominal (rate= 512.00000, diff=
6977.017, update_period=8)
[0m01308106879: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01308106935: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01308172074: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01308172145: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01308235971: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01308236030: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01308300051: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01308300108: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01308364010: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01308364070: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01308428006: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01308428062: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01308492024: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01308492081: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01308556011: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01308556088: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01308620021: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01308620079: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01308995727: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 693.79114) more that 10% off nominal (rate= 512.00000, diff=
5550.329, update_period=8)
[0m01309018964: [31mWarning (StreamProcessorManager.cpp)[ 913]
alignReceivedStreams: xrun while aligning streams...
[0m01309018995: [31mError (StreamProcessorManager.cpp)[ 877] syncStartAll:
Could not align streams...
[0m01309019028: [31mFatal (StreamProcessorManager.cpp)[1025] start: Could not
syncStartAll...
[0m01309283813: [31mWarning (TimestampedBuffer.cpp)[ 248] calculateRate:
(0x802620) rate ( 642.77966) more that 10% off nominal (rate= 512.00000, diff=
5142.237, update_period=8)
[0m01309284333: [31mWarning (devicemanager.cpp)[ 925] startStreaming: Failed
to start SPM!
[0m01309291686: [31mWarning (ieee1394service.cpp)[1509] freeIsoChannel:
Channel 1 not registered
[0m01309291739: [31mError (dice_avdevice.cpp)[1440] startstopStreamByIndex:
Could not deallocate iso channel for SP 1 (ARX 0)
[0m01309291750: [31mWarning (devicemanager.cpp)[ 959] stopStreamingOnDevice:
Could not stop stream 1 of device 0x7cb200
[0m01309291770: [31mWarning (devicemanager.cpp)[ 931] startStreaming: Could
not stop streaming on device 0x7cb200!
[0m01309291778: [31mFatal (ffado.cpp)[ 220] ffado_streaming_start: Could not
start the streaming system
[0mfirewire ERR: Could not start streaming threads
Cannot start driver
JackServer::Start() failed with -1
Failed to start server
no message buffer overruns
