Package: iproute2
Version: 5.5.0-1
Severity: normal
Hi!
On a system with a bridge "ip a" says:
1: lo: [...]
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state
UP group default qlen 1000
link/ether 02:ba:8f:9e:44:8f brd ff:ff:ff:ff:ff:ff
3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default qlen 1000
link/ether 76:29:4f:cd:bd:87 brd ff:ff:ff:ff:ff:ff
altname �
��
altname ��!���
inet 10.0.1.9/24 scope global br0
valid_lft forever preferred_lft forever
inet 192.168.0.9/24 scope global br0
valid_lft forever preferred_lft forever
inet6 2001:470:64f4::9/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::7429:4fff:fecd:bd87/64 scope link
valid_lft forever preferred_lft forever
Hex dump of the corrupted region:
00000270 20 20 61 6c 74 6e 61 6d 65 20 b0 15 0c 1e ab aa | altname ......|
00000280 0a 20 20 20 20 61 6c 74 6e 61 6d 65 20 c0 de 21 |. altname ..!|
00000290 a0 ff ff 0a 20 20 20 20 69 6e 65 74 20 31 30 2e |.... inet 10.|
.--====[ /etc/network/interfaces ]
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet manual
auto br0
iface br0 inet6 static
bridge_ports eth0
bridge_maxwait 30
address 2001:470:64f4::9
netmask 64
gateway 2001:470:64f4::90
up ip addr add 10.0.1.9/24 dev br0
up ip addr add 192.168.0.9/24 dev br0
up ip route add default via 192.168.0.1
`----
Meow!
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: arm64 (aarch64)
Kernel: Linux 5.6.0-00076-gbbfc4289910d (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=C.UTF-8, LC_CTYPE=C.UTF-8 (charmap=UTF-8), LANGUAGE=C.UTF-8
(charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages iproute2 depends on:
ii debconf [debconf-2.0] 1.5.73
ii libbsd0 0.10.0-1
ii libc6 2.30-4
ii libcap2 1:2.33-1
ii libcap2-bin 1:2.33-1
ii libdb5.3 5.3.28+dfsg1-0.6
ii libelf1 0.176-1.1
ii libmnl0 1.0.4-2+b1
ii libselinux1 3.0-1+b2
ii libxtables12 1.8.4-3
Versions of packages iproute2 recommends:
pn libatm1 <none>
Versions of packages iproute2 suggests:
pn iproute2-doc <none>
-- debconf information excluded
