Package: src:linux
Version: 5.4.13-1
Severity: important
File: /boot/vmlinuz-5.4.0-3-marvell
Dear Maintainer,
I tried updating from linux-image-4.19.0-5-marvell to
linux-image-5.4.0-3-marvell.
During installation, the update fails with the following message:
update-initramfs: Generating /boot/initrd.img-5.4.0-3-marvell
cp: cannot stat '/lib/libnss_files*': No such file or directory
W: initramfs-tools configuration sets
RESUME=UUID=e112d071-5e16-4f31-80eb-d3a16202ce4c
W: but no matching swap device is available.
I: The initramfs will attempt to resume from /dev/sda3
I: (UUID=fc5a8dda-223b-477a-9c72-16bcc25b6877)
I: Set the RESUME variable to override this.
kirkwood-qnap: machine: QNAP TS219 family
Using DTB: kirkwood-ts219-6281.dtb
Installing /usr/lib/linux-image-5.4.0-3-marvell/kirkwood-ts219-6281.dtb into
/boot/dtbs/5.4.0-3-marvell/./kirkwood-ts219-6281.dtb
Taking backup of kirkwood-ts219-6281.dtb.
Installing new kirkwood-ts219-6281.dtb.
Installing /usr/lib/linux-image-5.4.0-3-marvell/kirkwood-ts219-6281.dtb into
/boot/dtbs/5.4.0-3-marvell/./kirkwood-ts219-6281.dtb
Taking backup of kirkwood-ts219-6281.dtb.
Installing new kirkwood-ts219-6281.dtb.
flash-kernel: installing version 5.4.0-3-marvell
Not enough space for kernel in MTD 'Kernel' (need 2165432 but is actually
2097152).
run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1
$ ls -lrt /boot/vmlinuz-*
-rw-r--r-- 1 root root 2042208 mars 15 2019 /boot/vmlinuz-4.19.0-4-marvell
-rw-r--r-- 1 root root 2043816 juil. 19 2019 /boot/vmlinuz-4.19.0-5-marvell
-rw-r--r-- 1 root root 2165432 janv. 19 10:22 /boot/vmlinuz-5.4.0-3-marvell
$ cat /sys/class/mtd/mtd1/size
2097152
/boot/vmlinuz-5.4.0-3-marvell is too large and can't be flashed to /dev/mtd1.
Thank you
--
Sylvain
-- Package-specific info:
** Model information
Hardware : Marvell Kirkwood (Flattened Device Tree)
Revision : 0000
Device Tree model: QNAP TS219 family
** PCI devices:
00:01.0 PCI bridge [0604]: Marvell Technology Group Ltd. 88F6281 [Kirkwood] ARM
SoC [11ab:6281] (rev 02) (prog-if 00 [Normal decode])
Device tree node:
/sys/firmware/devicetree/base/mbus@f1000000/pcie@82000000/pcie@1,0
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: [disabled]
Memory behind bridge: [disabled]
Prefetchable memory behind bridge: 00000000-000fffff [size=1M]
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
** USB devices:
Bus 001 Device 005: ID 174c:55aa ASMedia Technology Inc. Name: ASM1051E SATA
6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E
SATA 6Gb/s bridge
Bus 001 Device 004: ID 174c:55aa ASMedia Technology Inc. Name: ASM1051E SATA
6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E
SATA 6Gb/s bridge
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 002: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: bullseye/sid
APT prefers testing
APT policy: (990, 'testing'), (50, 'unstable'), (40, 'experimental')
Architecture: armel (armv5tel)
Kernel: Linux 4.19.0-5-marvell
Kernel taint flags: TAINT_DIE
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8),
LANGUAGE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-5.4.0-3-marvell depends on:
ih initramfs-tools [linux-initramfs-tool] 0.136
ii kmod 26+20191223-1
ii linux-base 4.6
Versions of packages linux-image-5.4.0-3-marvell recommends:
pn apparmor <none>
pn firmware-linux-free <none>
ii u-boot-tools 2020.01+dfsg-1
Versions of packages linux-image-5.4.0-3-marvell suggests:
pn debian-kernel-handbook <none>
pn linux-doc-5.4 <none>
Versions of packages linux-image-5.4.0-3-marvell is related to:
pn firmware-amd-graphics <none>
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
