On Sat, Jan 11, 2020 at 08:45:10PM +1100, Brendan O'Dea wrote:
>[...] I've attached a shell script which outputs an amended --help text for
>qmi-firmware-update which may work better. Use "help2man X | man -l -" to
>test, where "X" is the filename you saved it to. Make sure that file is
>executable.
Oops, *really* attach script...
--bod
#!/bin/sh
for arg; do
case $arg in
--help) cat <<EOT
Usage: qmi-firmware-update [OPTION...] FILE1 FILE2...
Update firmware in QMI devices.
Generic device selection options
-s, --busnum-devnum=[BUS:]DEV Select device by bus and device number
(in decimal).
-d, --vid-pid=VID[:PID] Select device by device vendor and
product id (in hexadecimal).
-w, --cdc-wdm=[PATH] Select device by QMI/MBIM cdc-wdm device
path (e.g. /dev/cdc-wdm0).
-t, --tty=[PATH] Select device by serial device path
(e.g. /dev/ttyUSB2).
Update options (normal mode)
-u, --update Launch firmware update process.
-f, --firmware-version=[VERSION] Firmware version (e.g. '05.05.58.00').
-c, --config-version=[VERSION] Config version (e.g. '005.025_002').
-C, --carrier=[CARRIER] Carrier name (e.g. 'Generic').
--ignore-version-errors Run update operation even with version
string errors.
--override-download Download images even if module says it
already has them.
--modem-storage-index=[INDEX] Index storage for the modem image.
--skip-validation Don't wait to validate the running
firmware after update.
Reset options (normal mode)
-b, --reset Reset device into download mode.
Update options (download mode)
-U, --update-download Launch firmware update process while in
download (boot & hold) mode.
Verify options
-z, --verify Analyze and verify firmware images.
Application Options:
-p, --device-open-proxy Request to use the 'qmi-proxy' proxy.
--device-open-qmi Open a cdc-wdm device explicitly in QMI
mode
--device-open-mbim Open a cdc-wdm device explicitly in MBIM
mode
--device-open-auto Open a cdc-wdm device in either QMI or
MBIM mode (default)
--ignore-mm-runtime-check Ignore ModemManager runtime check
-v, --verbose Run action with verbose messages in
standard output, including the debug ones.
-S, --silent Run action with no messages in standard
output; not even the error ones.
-L, --verbose-log=[PATH] Write verbose messages to an output file.
-V, --version Print version.
-h, --help Show help.
-H, --help-examples Show help examples.
*Disclaimer*
********* Warning! ***********
Use this program with caution. The authors take *no* responsibility if any
device gets broken as a result of using this program.
Please report issues to the libqmi mailing list at:
[email protected]
EOT
;;
--version) echo "qmi-firmware-update x.y"
esac
done
