Package: libsane Version: 1.0.17-1 Severity: minor Tags: patch
Found some typos in '/usr/share/man/man5/sane-plustek.5.gz', see attached '.diff'. Hope this helps... -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Versions of packages libsane depends on: ii adduser 3.85 Add and remove users and groups ii libc6 2.3.6-3 GNU C Library: Shared libraries an ii libgphoto2-2 2.1.6-6 gphoto2 digital camera library ii libgphoto2-port0 2.1.6-6 gphoto2 digital camera port librar ii libieee1284-3 0.2.10-1 cross-platform library for paralle ii libjpeg62 6b-12 The Independent JPEG Group's JPEG ii libusb-0.1-4 2:0.1.11-6 userspace USB programming library ii makedev 2.3.1-80 creates device files in /dev Versions of packages libsane recommends: ii hotplug 0.0.20040329-25 Linux Hotplug Scripts ii sane-utils 1.0.17-1 API library for scanners -- utilit -- no debconf information
--- sane-plustek.5 2005-12-18 11:20:14.000000000 -0500 +++ /tmp/sane-plustek.5 2006-03-17 06:38:26.000000000 -0500 @@ -193,7 +193,7 @@ then the next matching device is used. .br The following options can be used for a default setup of -your device. Most of them are also availaby through +your device. Most of them are also available through the frontend. .PP .B @@ -449,12 +449,12 @@ is done on resolutions between the physical resolution of the CDD-sensor and the stepper motor i.e. you have a 600x1200 dpi scanner and you are scanning using 800dpi, -so scaling is necesary, because the sensor only delivers -600dpi but the motor is capable to perform 1200dpi +so scaling is necessary, because the sensor only delivers +600dpi but the motor is capable of performing 1200dpi steps. .PP -* Plusteks' model policy is somewhat inconsistent. This -means, they sell technical different devices under the +* Plusteks' model policy is somewhat inconsistent. They +sell technically different devices under the same product name. Therefore it is possible that some devices like the UT12 or U12 won't work \- please check the model list above and compare the product-id to
