Package: linux Version: 4.19.12-1 Hello Everyone, I tried the latest Buster Installer on my Fujitsu Q700 (rebranded qnap ts-21x) and Everything works except that /dev/mtdblock* devices are missing so flashing the kernel and initrd fails.
Regards, Lukas Straub
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.19.0-1-marvell (debian-ker...@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-12)) #1 Debian 4.19.12-1 (2018-12-22) [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: QNAP TS219 family [ 0.000000] Memory policy: Data cache writeback [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 [ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x4ac with crng_init=0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 504484K/524288K available (3943K kernel code, 342K rwdata, 1032K rodata, 304K init, 218K bss, 19804K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (3945 kB) [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) ( 304 kB) [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 343 kB) [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 219 kB) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 18837 entries in 37 pages [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns [ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns [ 0.000038] Switching to timer-based delay loop, resolution 5ns [ 0.000128] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) [ 0.000150] pid_max: default: 32768 minimum: 301 [ 0.000420] Security Framework initialized [ 0.000438] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.000542] AppArmor: AppArmor initialized [ 0.000673] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000693] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.001652] CPU: Testing write buffer coherency: ok [ 0.002622] Setting up static identity map for 0x8200 - 0x823c [ 0.002856] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 [ 0.004650] devtmpfs: initialized [ 0.007845] VFP support v0.3: not present [ 0.007994] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.008019] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.008382] pinctrl core: initialized pinctrl subsystem [ 0.009458] NET: Registered protocol family 16 [ 0.009839] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.010448] audit: initializing netlink subsys (disabled) [ 0.011192] cpuidle: using governor ladder [ 0.011208] cpuidle: using governor menu [ 0.011538] Feroceon L2: Enabling L2 [ 0.011580] Feroceon L2: Cache support initialised. [ 0.011809] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set [ 0.015587] No ATAGs? [ 0.016074] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 [ 0.019974] clocksource: Switched to clocksource orion_clocksource [ 0.041981] VFS: Disk quotas dquot_6.6.0 [ 0.042070] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.042509] AppArmor: AppArmor Filesystem Enabled [ 0.043616] NET: Registered protocol family 2 [ 0.044345] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.044374] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.044426] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.044476] TCP: Hash tables configured (established 4096 bind 4096) [ 0.044570] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.044593] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.044788] NET: Registered protocol family 1 [ 0.044818] PCI: CLS 0 bytes, default 32 [ 0.045040] Unpacking initramfs... [ 1.023995] random: fast init done [ 3.757700] Freeing initrd memory: 9216K [ 3.758513] Initialise system trusted keyrings [ 3.758685] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 3.763450] zbud: loaded [ 3.765193] Key type asymmetric registered [ 3.765205] Asymmetric key parser 'x509' registered [ 3.765257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.765428] io scheduler noop registered [ 3.765678] io scheduler cfq registered (default) [ 3.767160] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver [ 3.768746] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 [ 3.768765] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.768778] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] [ 3.768789] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] [ 3.768871] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 [ 3.769928] PCI: bus0: Fast back to back transfers disabled [ 3.769943] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.770901] PCI: bus1: Fast back to back transfers enabled [ 3.770917] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.771108] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.771625] mv_xor f1060800.xor: Marvell shared XOR driver [ 3.800841] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 3.801008] mv_xor f1060900.xor: Marvell shared XOR driver [ 3.828825] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) [ 3.829179] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.830102] console [ttyS0] disabled [ 3.830159] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A [ 4.390438] console [ttyS0] enabled [ 4.394499] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A [ 4.404204] libphy: Fixed MDIO Bus: probed [ 4.408342] i2c /dev entries driver [ 4.413153] ledtrig-cpu: registered to indicate activity on CPUs [ 4.420142] registered taskstats version 1 [ 4.424279] Loading compiled-in X.509 certificates [ 4.449399] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' [ 4.459032] AppArmor: AppArmor sha1 policy hashing enabled [ 4.465725] hctosys: unable to open rtc device (rtc0) [ 4.473454] Freeing unused kernel memory: 304K [ 4.477944] This architecture does not have kernel memory protection. [ 4.484426] Run /init as init process [ 4.639228] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 4.745988] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 [ 4.755931] libphy: orion_mdio_bus: probed [ 4.795361] usbcore: registered new interface driver usbfs [ 4.805575] SCSI subsystem initialized [ 4.815754] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set [ 4.844342] usbcore: registered new interface driver hub [ 4.860694] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:cc:dd:6c [ 4.883719] usbcore: registered new device driver usb [ 4.915471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.928211] libata version 3.00 loaded. [ 4.930567] sata_mv f1080000.sata: version 1.28 [ 4.930806] sata_mv f1080000.sata: slots 32 ports 2 [ 4.981000] ehci-orion: EHCI orion driver [ 4.987914] scsi host0: sata_mv [ 5.000076] orion-ehci f1050000.ehci: EHCI Host Controller [ 5.007141] scsi host1: sata_mv [ 5.016886] ata1: SATA max UDMA/133 irq 35 [ 5.021043] ata2: SATA max UDMA/133 irq 35 [ 5.033928] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 [ 5.043909] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 [ 5.063994] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 [ 5.070279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 5.078610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.085882] usb usb1: Product: EHCI Host Controller [ 5.090800] usb usb1: Manufacturer: Linux 4.19.0-1-marvell ehci_hcd [ 5.097113] usb usb1: SerialNumber: f1050000.ehci [ 5.104037] hub 1-0:1.0: USB hub found [ 5.107841] hub 1-0:1.0: 1 port detected [ 5.443996] usb 1-1: new high-speed USB device number 2 using orion-ehci [ 5.605528] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63 [ 5.613764] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.620967] usb 1-1: Product: USB2.0 Hub [ 5.631588] hub 1-1:1.0: USB hub found [ 5.635788] hub 1-1:1.0: 4 ports detected [ 5.864010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 5.932036] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 [ 5.938703] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.966305] ata1.00: configured for UDMA/133 [ 5.970949] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5 [ 6.452010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) [ 6.500035] ata2.00: ATA-8: WDC WD2500BPVT-80ZEST0, 01.01A01, max UDMA/133 [ 6.506959] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.520442] ata2.00: configured for UDMA/133 [ 6.525081] scsi 1:0:0:0: Direct-Access ATA WDC WD2500BPVT-8 1A01 PQ: 0 ANSI: 5 [ 6.561223] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 6.574973] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) [ 6.582538] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 6.590532] sd 0:0:0:0: [sda] Write Protect is off [ 6.595390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.595486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.604649] sd 1:0:0:0: [sdb] Write Protect is off [ 6.609482] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 6.609565] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.639188] sdb: sdb1 [ 6.643866] sd 1:0:0:0: [sdb] Attached SCSI disk [ 6.664502] sda: sda1 [ 6.669276] sd 0:0:0:0: [sda] Attached SCSI disk [ 16.956117] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled [ 16.956300] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 18.473913] NET: Registered protocol family 17 [ 18.631879] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled [ 18.740746] random: crng init done
BusyBox v1.27.2 (Debian 1:1.27.2-3) built-in shell (ash) Enter 'help' for a list of built-in commands. ~ # ls /dev block cpu_dma_latency gpiochip1 mem port sda1 stdout zero bsg disk i2c-0 memory_bandwidth ptmx sdb tty bus fd input network_latency pts sdb1 ttyS0 char full kmsg network_throughput random stderr ttyS1 console gpiochip0 log null sda stdin urandom ~ # lsmod Module Size Used by af_packet 32382 0 ext4 512803 0 crc16 1293 1 ext4 mbcache 4400 1 ext4 jbd2 79489 1 ext4 crc32c_generic 1945 0 fscrypto 17256 1 ext4 ecb 2171 0 sd_mod 32078 0 ehci_orion 3765 0 sata_mv 26054 0 ehci_hcd 53205 1 ehci_orion libata 173264 1 sata_mv evdev 11411 0 scsi_mod 174479 2 sd_mod,libata usbcore 159141 2 ehci_orion,ehci_hcd mvmdio 4528 0 mv643xx_eth 27840 0 usb_common 3755 1 usbcore nls_base 5869 1 usbcore gpio_keys 7758 0 sha256_generic 9524 0 ~ # uname -a Linux debian 4.19.0-1-marvell #1 Debian 4.19.12-1 (2018-12-22) armv5tel GNU/Linux ~ #
Jan 1 00:00:06 syslogd started: BusyBox v1.27.2 Jan 1 00:00:06 kernel: klogd started: BusyBox v1.27.2 (Debian 1:1.27.2-3) Jan 1 00:00:06 kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Jan 1 00:00:06 kernel: [ 0.000000] Linux version 4.19.0-1-marvell (debian-ker...@lists.debian.org) (gcc version 8.2.0 (Debian 8.2.0-12)) #1 Debian 4.19.12-1 (2018-12-22) Jan 1 00:00:06 kernel: [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f Jan 1 00:00:06 kernel: [ 0.000000] CPU: VIVT data cache, VIVT instruction cache Jan 1 00:00:06 kernel: [ 0.000000] OF: fdt: Machine model: QNAP TS219 family Jan 1 00:00:06 kernel: [ 0.000000] Memory policy: Data cache writeback Jan 1 00:00:06 kernel: [ 0.000000] On node 0 totalpages: 131072 Jan 1 00:00:06 kernel: [ 0.000000] Normal zone: 1024 pages used for memmap Jan 1 00:00:06 kernel: [ 0.000000] Normal zone: 0 pages reserved Jan 1 00:00:06 kernel: [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 Jan 1 00:00:06 kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x4ac with crng_init=0 Jan 1 00:00:06 kernel: [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 Jan 1 00:00:06 kernel: [ 0.000000] pcpu-alloc: [0] 0 Jan 1 00:00:06 kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 Jan 1 00:00:06 kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768 Jan 1 00:00:06 kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Jan 1 00:00:06 kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Jan 1 00:00:06 kernel: [ 0.000000] Memory: 504484K/524288K available (3943K kernel code, 342K rwdata, 1032K rodata, 304K init, 218K bss, 19804K reserved, 0K cma-reserved, 0K highmem) Jan 1 00:00:06 kernel: [ 0.000000] Virtual kernel memory layout: Jan 1 00:00:06 kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) Jan 1 00:00:06 kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) Jan 1 00:00:06 kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) Jan 1 00:00:06 kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) Jan 1 00:00:06 kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) Jan 1 00:00:06 kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) Jan 1 00:00:06 kernel: [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (3945 kB) Jan 1 00:00:06 kernel: [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) ( 304 kB) Jan 1 00:00:07 kernel: [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 343 kB) Jan 1 00:00:07 kernel: [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 219 kB) Jan 1 00:00:07 kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Jan 1 00:00:07 kernel: [ 0.000000] ftrace: allocating 18837 entries in 37 pages Jan 1 00:00:07 kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Jan 1 00:00:07 kernel: [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns Jan 1 00:00:07 kernel: [ 0.000008] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns Jan 1 00:00:07 kernel: [ 0.000038] Switching to timer-based delay loop, resolution 5ns Jan 1 00:00:07 kernel: [ 0.000128] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) Jan 1 00:00:07 kernel: [ 0.000150] pid_max: default: 32768 minimum: 301 Jan 1 00:00:07 kernel: [ 0.000420] Security Framework initialized Jan 1 00:00:07 kernel: [ 0.000438] Yama: disabled by default; enable with sysctl kernel.yama.* Jan 1 00:00:07 kernel: [ 0.000542] AppArmor: AppArmor initialized Jan 1 00:00:07 kernel: [ 0.000673] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Jan 1 00:00:07 kernel: [ 0.000693] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Jan 1 00:00:07 kernel: [ 0.001652] CPU: Testing write buffer coherency: ok Jan 1 00:00:07 kernel: [ 0.002622] Setting up static identity map for 0x8200 - 0x823c Jan 1 00:00:07 kernel: [ 0.002856] mvebu-soc-id: MVEBU SoC ID=0x6281, Rev=0x3 Jan 1 00:00:07 kernel: [ 0.004650] devtmpfs: initialized Jan 1 00:00:07 kernel: [ 0.007845] VFP support v0.3: not present Jan 1 00:00:07 kernel: [ 0.007994] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Jan 1 00:00:07 kernel: [ 0.008019] futex hash table entries: 256 (order: -1, 3072 bytes) Jan 1 00:00:07 kernel: [ 0.008382] pinctrl core: initialized pinctrl subsystem Jan 1 00:00:07 kernel: [ 0.009458] NET: Registered protocol family 16 Jan 1 00:00:07 kernel: [ 0.009839] DMA: preallocated 256 KiB pool for atomic coherent allocations Jan 1 00:00:07 kernel: [ 0.010448] audit: initializing netlink subsys (disabled) Jan 1 00:00:07 kernel: [ 0.011192] cpuidle: using governor ladder Jan 1 00:00:07 kernel: [ 0.011208] cpuidle: using governor menu Jan 1 00:00:07 kernel: [ 0.011538] Feroceon L2: Enabling L2 Jan 1 00:00:07 kernel: [ 0.011580] Feroceon L2: Cache support initialised. Jan 1 00:00:07 kernel: [ 0.011809] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set Jan 1 00:00:07 kernel: [ 0.015587] No ATAGs? Jan 1 00:00:07 kernel: [ 0.016074] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1 Jan 1 00:00:07 kernel: [ 0.019974] clocksource: Switched to clocksource orion_clocksource Jan 1 00:00:07 kernel: [ 0.041981] VFS: Disk quotas dquot_6.6.0 Jan 1 00:00:07 kernel: [ 0.042070] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jan 1 00:00:07 kernel: [ 0.042509] AppArmor: AppArmor Filesystem Enabled Jan 1 00:00:07 kernel: [ 0.043616] NET: Registered protocol family 2 Jan 1 00:00:07 kernel: [ 0.044345] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) Jan 1 00:00:07 kernel: [ 0.044374] TCP established hash table entries: 4096 (order: 2, 16384 bytes) Jan 1 00:00:07 kernel: [ 0.044426] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) Jan 1 00:00:07 kernel: [ 0.044476] TCP: Hash tables configured (established 4096 bind 4096) Jan 1 00:00:07 kernel: [ 0.044570] UDP hash table entries: 256 (order: 0, 4096 bytes) Jan 1 00:00:07 kernel: [ 0.044593] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) Jan 1 00:00:07 kernel: [ 0.044788] NET: Registered protocol family 1 Jan 1 00:00:07 kernel: [ 0.044818] PCI: CLS 0 bytes, default 32 Jan 1 00:00:07 kernel: [ 0.045040] Unpacking initramfs... Jan 1 00:00:07 kernel: [ 1.023995] random: fast init done Jan 1 00:00:07 kernel: [ 3.757700] Freeing initrd memory: 9216K Jan 1 00:00:07 kernel: [ 3.758513] Initialise system trusted keyrings Jan 1 00:00:07 kernel: [ 3.758685] workingset: timestamp_bits=30 max_order=17 bucket_order=0 Jan 1 00:00:07 kernel: [ 3.763450] zbud: loaded Jan 1 00:00:07 kernel: [ 3.765193] Key type asymmetric registered Jan 1 00:00:07 kernel: [ 3.765205] Asymmetric key parser 'x509' registered Jan 1 00:00:07 kernel: [ 3.765257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) Jan 1 00:00:07 kernel: [ 3.765428] io scheduler noop registered Jan 1 00:00:07 kernel: [ 3.765678] io scheduler cfq registered (default) Jan 1 00:00:07 kernel: [ 3.767160] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver Jan 1 00:00:07 kernel: [ 3.768746] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00 Jan 1 00:00:07 kernel: [ 3.768765] pci_bus 0000:00: root bus resource [bus 00-ff] Jan 1 00:00:07 kernel: [ 3.768778] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff] Jan 1 00:00:07 kernel: [ 3.768789] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] Jan 1 00:00:07 kernel: [ 3.768871] pci 0000:00:01.0: [11ab:6281] type 01 class 0x060400 Jan 1 00:00:07 kernel: [ 3.769928] PCI: bus0: Fast back to back transfers disabled Jan 1 00:00:07 kernel: [ 3.769943] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring Jan 1 00:00:07 kernel: [ 3.770901] PCI: bus1: Fast back to back transfers enabled Jan 1 00:00:07 kernel: [ 3.770917] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 Jan 1 00:00:07 kernel: [ 3.771108] pci 0000:00:01.0: PCI bridge to [bus 01] Jan 1 00:00:07 kernel: [ 3.771625] mv_xor f1060800.xor: Marvell shared XOR driver Jan 1 00:00:07 kernel: [ 3.800841] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) Jan 1 00:00:07 kernel: [ 3.801008] mv_xor f1060900.xor: Marvell shared XOR driver Jan 1 00:00:07 kernel: [ 3.828825] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) Jan 1 00:00:07 kernel: [ 3.829179] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Jan 1 00:00:07 kernel: [ 3.830102] console [ttyS0] disabled Jan 1 00:00:07 kernel: [ 3.830159] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 12500000) is a 16550A Jan 1 00:00:07 kernel: [ 4.390438] console [ttyS0] enabled Jan 1 00:00:07 kernel: [ 4.394499] f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 12500000) is a 16550A Jan 1 00:00:07 kernel: [ 4.404204] libphy: Fixed MDIO Bus: probed Jan 1 00:00:07 kernel: [ 4.408342] i2c /dev entries driver Jan 1 00:00:07 kernel: [ 4.413153] ledtrig-cpu: registered to indicate activity on CPUs Jan 1 00:00:07 kernel: [ 4.420142] registered taskstats version 1 Jan 1 00:00:07 kernel: [ 4.424279] Loading compiled-in X.509 certificates Jan 1 00:00:07 kernel: [ 4.449399] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff' Jan 1 00:00:07 kernel: [ 4.459032] AppArmor: AppArmor sha1 policy hashing enabled Jan 1 00:00:07 kernel: [ 4.465725] hctosys: unable to open rtc device (rtc0) Jan 1 00:00:07 kernel: [ 4.473454] Freeing unused kernel memory: 304K Jan 1 00:00:07 kernel: [ 4.477944] This architecture does not have kernel memory protection. Jan 1 00:00:07 kernel: [ 4.484426] Run /init as init process Jan 1 00:00:07 kernel: [ 4.639228] input: gpio_keys as /devices/platform/gpio_keys/input/input0 Jan 1 00:00:07 kernel: [ 4.745988] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 Jan 1 00:00:07 kernel: [ 4.755931] libphy: orion_mdio_bus: probed Jan 1 00:00:07 kernel: [ 4.795361] usbcore: registered new interface driver usbfs Jan 1 00:00:07 kernel: [ 4.805575] SCSI subsystem initialized Jan 1 00:00:07 kernel: [ 4.815754] mv643xx_eth_port mv643xx_eth_port.0: DMA mask not set Jan 1 00:00:07 kernel: [ 4.844342] usbcore: registered new interface driver hub Jan 1 00:00:07 kernel: [ 4.860694] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:cc:dd:6c Jan 1 00:00:07 kernel: [ 4.883719] usbcore: registered new device driver usb Jan 1 00:00:07 kernel: [ 4.915471] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jan 1 00:00:07 kernel: [ 4.928211] libata version 3.00 loaded. Jan 1 00:00:07 kernel: [ 4.930567] sata_mv f1080000.sata: version 1.28 Jan 1 00:00:07 kernel: [ 4.930806] sata_mv f1080000.sata: slots 32 ports 2 Jan 1 00:00:07 kernel: [ 4.981000] ehci-orion: EHCI orion driver Jan 1 00:00:07 kernel: [ 4.987914] scsi host0: sata_mv Jan 1 00:00:07 kernel: [ 5.000076] orion-ehci f1050000.ehci: EHCI Host Controller Jan 1 00:00:07 kernel: [ 5.007141] scsi host1: sata_mv Jan 1 00:00:07 kernel: [ 5.016886] ata1: SATA max UDMA/133 irq 35 Jan 1 00:00:07 kernel: [ 5.021043] ata2: SATA max UDMA/133 irq 35 Jan 1 00:00:07 kernel: [ 5.033928] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 Jan 1 00:00:07 kernel: [ 5.043909] orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 Jan 1 00:00:07 kernel: [ 5.063994] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 Jan 1 00:00:07 kernel: [ 5.070279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 Jan 1 00:00:07 kernel: [ 5.078610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jan 1 00:00:07 kernel: [ 5.085882] usb usb1: Product: EHCI Host Controller Jan 1 00:00:07 kernel: [ 5.090800] usb usb1: Manufacturer: Linux 4.19.0-1-marvell ehci_hcd Jan 1 00:00:07 kernel: [ 5.097113] usb usb1: SerialNumber: f1050000.ehci Jan 1 00:00:07 kernel: [ 5.104037] hub 1-0:1.0: USB hub found Jan 1 00:00:07 kernel: [ 5.107841] hub 1-0:1.0: 1 port detected Jan 1 00:00:07 kernel: [ 5.443996] usb 1-1: new high-speed USB device number 2 using orion-ehci Jan 1 00:00:07 kernel: [ 5.605528] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=77.63 Jan 1 00:00:07 kernel: [ 5.613764] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jan 1 00:00:07 kernel: [ 5.620967] usb 1-1: Product: USB2.0 Hub Jan 1 00:00:07 kernel: [ 5.631588] hub 1-1:1.0: USB hub found Jan 1 00:00:07 kernel: [ 5.635788] hub 1-1:1.0: 4 ports detected Jan 1 00:00:07 kernel: [ 5.864010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300) Jan 1 00:00:07 kernel: [ 5.932036] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133 Jan 1 00:00:07 kernel: [ 5.938703] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) Jan 1 00:00:07 kernel: [ 5.966305] ata1.00: configured for UDMA/133 Jan 1 00:00:07 kernel: [ 5.970949] scsi 0:0:0:0: Direct-Access ATA WDC WD15EADS-00P 0A01 PQ: 0 ANSI: 5 Jan 1 00:00:07 kernel: [ 6.452010] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300) Jan 1 00:00:07 kernel: [ 6.500035] ata2.00: ATA-8: WDC WD2500BPVT-80ZEST0, 01.01A01, max UDMA/133 Jan 1 00:00:07 kernel: [ 6.506959] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) Jan 1 00:00:07 kernel: [ 6.520442] ata2.00: configured for UDMA/133 Jan 1 00:00:07 kernel: [ 6.525081] scsi 1:0:0:0: Direct-Access ATA WDC WD2500BPVT-8 1A01 PQ: 0 ANSI: 5 Jan 1 00:00:07 kernel: [ 6.561223] sd 0:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) Jan 1 00:00:07 kernel: [ 6.574973] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB) Jan 1 00:00:07 kernel: [ 6.582538] sd 1:0:0:0: [sdb] 4096-byte physical blocks Jan 1 00:00:07 kernel: [ 6.590532] sd 0:0:0:0: [sda] Write Protect is off Jan 1 00:00:07 kernel: [ 6.595390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jan 1 00:00:07 kernel: [ 6.595486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 1 00:00:07 kernel: [ 6.604649] sd 1:0:0:0: [sdb] Write Protect is off Jan 1 00:00:07 kernel: [ 6.609482] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Jan 1 00:00:07 kernel: [ 6.609565] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jan 1 00:00:07 kernel: [ 6.639188] sdb: sdb1 Jan 1 00:00:07 kernel: [ 6.643866] sd 1:0:0:0: [sdb] Attached SCSI disk Jan 1 00:00:07 kernel: [ 6.664502] sda: sda1 Jan 1 00:00:07 kernel: [ 6.669276] sd 0:0:0:0: [sda] Attached SCSI disk Jan 1 00:00:10 preseed: successfully loaded preseed file from file:///preseed.cfg Jan 1 00:00:13 init: starting pid 817, tty '': '/sbin/reopen-console /sbin/debian-installer' Jan 1 00:00:13 debconf: Setting debconf/language to en Jan 1 00:00:13 main-menu[833]: INFO: Menu item 'ethdetect' selected Jan 1 00:00:14 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Jan 1 00:00:15 net/hw-detect.hotplug: Detected hotpluggable network interface lo Jan 1 00:00:15 apt-install: Queueing package udev for later installation Jan 1 00:00:15 apt-install: Queueing package pciutils for later installation Jan 1 00:00:15 apt-install: Queueing package usbutils for later installation Jan 1 00:00:15 hw-detect: Missing modules 'usb-storage (USB storage) Jan 1 00:00:16 check-missing-firmware: looking at dmesg for the first time Jan 1 00:00:16 check-missing-firmware: saving timestamp for a later use: [ 6.669276] Jan 1 00:00:16 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Jan 1 00:00:16 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Jan 1 00:00:16 check-missing-firmware: no missing firmware in loaded kernel modules Jan 1 00:00:16 check-missing-firmware: taking network interface -n up/down Jan 1 00:00:16 check-missing-firmware: taking network interface eth0 up/down Jan 1 00:00:16 kernel: [ 16.956117] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled Jan 1 00:00:16 kernel: [ 16.956300] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down Jan 1 00:00:17 check-missing-firmware: looking at dmesg again, restarting from \[ 6.669276\] Jan 1 00:00:18 check-missing-firmware: timestamp found, truncating dmesg accordingly Jan 1 00:00:18 check-missing-firmware: saving timestamp for a later use: [ 16.956300] Jan 1 00:00:18 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Jan 1 00:00:18 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Jan 1 00:00:18 check-missing-firmware: no missing firmware in loaded kernel modules Jan 1 00:00:18 main-menu[833]: (process:861): ip: SIOCGIFFLAGS: No such device Jan 1 00:00:18 main-menu[833]: (process:861): ip: SIOCGIFFLAGS: No such device Jan 1 00:00:18 main-menu[833]: INFO: Menu item 'netcfg' selected Jan 1 00:00:18 main-menu[833]: INFO: Falling back to the package description for crypto-modules-4.19.0-1-marvell-di Jan 1 00:00:18 main-menu[833]: INFO: Falling back to the package description for crypto-modules-4.19.0-1-marvell-di Jan 1 00:00:18 netcfg[1094]: INFO: Starting netcfg v.1.157 Jan 1 00:00:18 netcfg[1094]: WARNING **: Couldn't read Wpasupplicant pid file, not trying to kill. Jan 1 00:00:18 netcfg[1094]: INFO: Could not find valid BOOTIF= entry in /proc/cmdline Jan 1 00:00:18 netcfg[1094]: INFO: Taking down interface eth0 Jan 1 00:00:18 netcfg[1094]: INFO: Taking down interface lo Jan 1 00:00:18 kernel: [ 18.473913] NET: Registered protocol family 17 Jan 1 00:00:18 netcfg[1094]: INFO: Activating interface eth0 Jan 1 00:00:18 netcfg[1094]: DEBUG: State is now 0 Jan 1 00:00:18 netcfg[1094]: DEBUG: Want link on eth0 Jan 1 00:00:18 netcfg[1094]: INFO: Waiting time set to 3 Jan 1 00:00:18 kernel: [ 18.631879] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, full duplex, flow control disabled Jan 1 00:00:18 kernel: [ 18.740746] random: crng init done Jan 1 00:00:18 netcfg[1094]: INFO: ethtool-lite: eth0: carrier up Jan 1 00:00:18 netcfg[1094]: INFO: Found link on eth0 Jan 1 00:00:18 netcfg[1094]: DEBUG: Commencing network autoconfiguration on eth0 Jan 1 00:00:18 netcfg[1094]: DEBUG: rdnssd started; PID: 1109 Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:19 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:19 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:19 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:20 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:20 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:20 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:21 netcfg[1094]: DEBUG: nc_v6_interface_configured(eth0, scope local) Jan 1 00:00:21 netcfg[1094]: DEBUG: Running ip addr show eth0 to look for address Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq qlen 1000 Jan 1 00:00:21 netcfg[1094]: DEBUG: ip line: link/ether 00:08:9b:cc:dd:6c brd ff:ff:ff:ff:ff:ff Jan 1 00:00:21 netcfg[1094]: INFO: No IPv6 support found... how does that happen? Jan 1 00:00:21 netcfg[1094]: DEBUG: Stopping rdnssd, PID 1109 Jan 1 00:00:21 netcfg[1094]: DEBUG: No RA received; attempting IPv4 autoconfig Jan 1 00:00:21 netcfg[1094]: WARNING **: Started DHCP client; PID is 1135 Jan 1 00:00:22 udhcpc: Got IP 192.168.223.15 (using eth0) and routing through 192.168.223.10 Jan 1 00:00:25 netcfg[1094]: DEBUG: Reading domain name returned via DHCP Jan 1 00:00:25 netcfg[1094]: DEBUG: Reading nameservers from /etc/resolv.conf Jan 1 00:00:25 netcfg[1094]: DEBUG: Read nameserver 192.168.223.10 Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 1 Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 2 Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 5 Jan 1 00:00:25 netcfg[1094]: DEBUG: Using DNS to try and obtain default hostname Jan 1 00:00:25 netcfg[1094]: DEBUG: Getting default hostname from rDNS lookup of autoconfigured address 192.168.223.15 Jan 1 00:00:25 netcfg[1094]: DEBUG: getnameinfo() returned -2 (Name or service not known) Jan 1 00:00:25 netcfg[1094]: DEBUG: State is now 6 Jan 1 00:00:25 netcfg[1094]: DEBUG: Network config complete Jan 1 00:00:25 netcfg[1094]: DEBUG: No interface given; clearing /etc/network/interfaces Jan 1 00:00:25 netcfg[1094]: DEBUG: Writing informative header Jan 1 00:00:25 netcfg[1094]: DEBUG: Success! Jan 1 00:00:25 netcfg[1094]: DEBUG: Writing loopback interface Jan 1 00:00:25 netcfg[1094]: DEBUG: Success! Jan 1 00:00:25 netcfg[1094]: DEBUG: Writing DHCP stanza for eth0 Jan 1 00:00:25 netcfg[1094]: INFO: Detected eth0 as a hotpluggable device Jan 1 00:00:25 netcfg[1094]: DEBUG: Success! Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: started, v1.27.2 Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: sending discover Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: sending select for 192.168.223.15 Jan 1 00:00:26 main-menu[833]: (process:1093): udhcpc: lease of 192.168.223.15 obtained, lease time 3600 Jan 1 00:00:26 main-menu[833]: INFO: Menu item 'network-console' selected Jan 1 00:00:28 sshd[1200]: Server listening on 0.0.0.0 port 22. Jan 1 00:00:28 apt-install: Queueing package openssh-server for later installation Jan 1 00:01:15 sshd[1226]: Connection closed by 192.168.223.10 port 41012 [preauth] Jan 1 00:01:28 sshd[1229]: Accepted password for installer from 192.168.223.10 port 41014 ssh2 Jan 1 00:01:28 sshd[1232]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory Jan 1 00:01:28 sshd[1232]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory Jan 1 00:01:29 debconf: Setting debconf/language to en Jan 1 00:03:36 sshd[1229]: syslogin_perform_logout: logout() returned an error Jan 1 00:03:36 sshd[1229]: Received disconnect from 192.168.223.10 port 41014:11: disconnected by user Jan 1 00:03:36 sshd[1229]: Disconnected from user installer 192.168.223.10 port 41014 Jan 1 00:04:06 sshd[1258]: Accepted password for root from 192.168.223.10 port 41016 ssh2 Jan 1 00:04:07 sshd[1258]: Received disconnect from 192.168.223.10 port 41016:11: disconnected by user Jan 1 00:04:07 sshd[1258]: Disconnected from user root 192.168.223.10 port 41016 Jan 1 00:04:28 sshd[1263]: Accepted password for root from 192.168.223.10 port 41018 ssh2
