Package: gddccontrol Version: 0.4.4-1 Severity: normal Monitor is in the pulldown menu but selecting it only shows:
An error occurred while opening the monitor device. Maybe this monitor was disconnected, please click on the refresh button near the monitor list. And STDERR prints: $ ioctl(): Input/output error ioctl returned -1 Reading EDID 0x50 failed. Controling the monitor with ddccontrol works, though, like: $ ddccontrol -r 0x10 -w 1 dev:/dev/i2c-7 ddc probe data is attached. Best regards, Eduard. -- System Information: Debian Release: buster/sid APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental-debug'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.1 (SMP w/4 CPU cores; PREEMPT) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Init: systemd (via /run/systemd/system) Versions of packages gddccontrol depends on: ii ddccontrol 0.4.4-1 ii libc6 2.27-6 ii libddccontrol0 0.4.4-1 ii libglib2.0-0 2.58.1-2 ii libgtk2.0-0 2.24.32-3 ii libpango-1.0-0 1.42.4-3 ii policykit-1 0.105-21 gddccontrol recommends no packages. gddccontrol suggests no packages. -- no debconf information -- <BlueByte> Wie heißt denn die Kerneloption für mehr als 4GB Ram? <cehteh> x86_64 ;)
ddccontrol version 0.4.4 Copyright 2004-2005 Oleg I. Vdovikin ([email protected]) Copyright 2004-2006 Nicolas Boichat ([email protected]) This program comes with ABSOLUTELY NO WARRANTY. You may redistribute copies of this program under the terms of the GNU General Public License. Probing for available monitors............. Detected monitors : - Device: dev:/dev/i2c-7 DDC/CI supported: Yes Monitor Name: Samsung SyncMaster 710TM Input type: Digital (Automatically selected) - Device: dev:/dev/i2c-5 DDC/CI supported: No Monitor Name: VESA standard monitor Input type: Digital Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-7... EDID readings: Plug and Play ID: SAM0168 [Samsung SyncMaster 710TM] Input type: Digital = Samsung SyncMaster 710TM > Color settings > Brightness and Contrast > id=magicbright, name=Magic Bright Mode, address=0xdc, delay=-1ms, type=2 Possible values: > id=text - name=Text, value=1 > id=internet - name=Internet, value=2 > id=entertain - name=Entertain, value=3 > id=custom - name=Custom, value=4 supported, value=4, maximum=4 > id=brightness, name=Brightness, address=0x10, delay=-1ms, type=0 supported, value=1, maximum=100 > id=contrast, name=Contrast, address=0x12, delay=-1ms, type=0 supported, value=63, maximum=100 > Color maximum level > id=red, name=Red maximum level, address=0x16, delay=-1ms, type=0 supported, value=32, maximum=64 > id=green, name=Green maximum level, address=0x18, delay=-1ms, type=0 supported, value=32, maximum=64 > id=blue, name=Blue maximum level, address=0x1a, delay=-1ms, type=0 supported, value=32, maximum=64 > Various color settings > id=colorpreset, name=Color Preset, address=0xe0, delay=-1ms, type=2 Possible values: > id=normal - name=Normal, value=3 > id=custom - name=Custom, value=0 > id=warm - name=Warm, value=1 > id=cool - name=Cool, value=2 supported, value=0, maximum=3 > Others > Restore defaults > id=defaults, name=Restore Factory Defaults, address=0x4, delay=2000ms, type=1 Possible values: > id=default - name=Restore Factory Defaults, value=1 supported, value=0, maximum=1 > id=defaultluma, name=Restore Brightness and Contrast, address=0x5, delay=2000ms, type=1 Possible values: > id=default - name=Restore Brightness and Contrast, value=1 supported, value=0, maximum=1 > id=defaultcolor, name=Restore Factory Default Color, address=0x8, delay=2000ms, type=1 Possible values: > id=default - name=Restore Factory Default Color, value=1 supported, value=0, maximum=1 > id=settings, name=Settings, address=0xb0, delay=1000ms, type=1 Possible values: > id=default - name=Settings, value=1 supported, value=0, maximum=2 > OSD > id=osd, name=On Screen Display, address=0xca, delay=-1ms, type=2 Possible values: > id=disable - name=Disable, value=1 > id=enable - name=Enable, value=2 supported, value=2, maximum=2 > id=osd2, name=On Screen Display (Samsung), address=0xf5, delay=-1ms, type=2 Possible values: > id=disable - name=Disable, value=1 > id=enable - name=Enable, value=0 supported, value=0, maximum=2 > id=language, name=Language select, address=0xcc, delay=-1ms, type=2 Possible values: > id=english - name=English, value=2 > id=french - name=Français (French), value=3 > id=german - name=Deutsch (German), value=4 > id=italian - name=Italiano (Italian), value=5 > id=spanish - name=Castellano (Spanish), value=10 > id=russian - name=Русский (Russian), value=9 > id=swedish - name=Svenska (Swedish), value=11 supported, value=2, maximum=11 > Input settings > id=autosource, name=Autoselect Input Source, address=0xe2, delay=-1ms, type=2 Possible values: > id=auto - name=Automatic, value=0 > id=manual - name=Manual, value=1 supported, value=0, maximum=1 > id=inputsource, name=Input Source Select, address=0x60, delay=-1ms, type=2 Possible values: > id=analog - name=Analog, value=1 > id=digital - name=Digital, value=3 supported, value=3, maximum=3 > Power control > id=dpms, name=DPMS Control, address=0xd6, delay=-1ms, type=2 Possible values: > id=on - name=On, value=1 > id=standby - name=Standby, value=4 supported, value=1, maximum=4 > id=power, name=Power control, address=0xe1, delay=-1ms, type=2 Possible values: > id=off - name=Off, value=0 > id=on - name=On, value=1 supported, value=1, maximum=1
