Package: installation-reports
Boot method: CD (using 2.6 kernel and /install/2.6/initrd.gz ramdisk image)
Image version: debian-testing-i386-businesscard.iso
Downloaded from:
http://cdimage.debian.org/cdimage/daily-builds/etch_d-i/beta1/i386/iso
-cd/
Download date: Wed, 08 Mar 2006 13:08:34 -0500
Date: Wed, 08 Mar 2006 13:08:34 -0500
Machine: Dell Precision 470n
Processor: Intel(R) Xeon(TM) CPU 2.80GHz
Memory: 1035096 kB
Partitions:
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 4863 39062016 83 Linux
/dev/sda2 4864 19452 117186142+ 5 Extended
/dev/sda5 4864 19122 114535386 83 Linux
/dev/sda6 19123 19452 2650693+ 82 Linux swap / Solaris
Output of lspci and lspci -n:
$ lspci
0000:00:00.0 Host bridge: Intel Corp. Workstation Memory Controller Hub (rev 09)
0000:00:00.1 ff00: Intel Corp. Memory Controller Hub Error Reporting Register
(rev 09)
0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0
(rev 09)
0000:00:03.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A1
(rev 09)
0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0
(rev 09)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
(rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
(rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
(rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
(rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100
Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage
Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev
02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R)
AC'97 Audio Controller (rev 02)
0000:01:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A
0000:01:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B
0000:03:0e.0 Ethernet controller: Intel Corp. 82545GM Gigabit Ethernet
Controller (rev 04)
0000:05:00.0 VGA compatible controller: nVidia Corporation: Unknown device 00fd
(rev a2)
$ lspci -n
0000:00:00.0 0600: 8086:359e (rev 09)
0000:00:00.1 ff00: 8086:3591 (rev 09)
0000:00:02.0 0604: 8086:3595 (rev 09)
0000:00:03.0 0604: 8086:3596 (rev 09)
0000:00:04.0 0604: 8086:3597 (rev 09)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:01:00.0 0604: 8086:0329
0000:01:00.2 0604: 8086:032a
0000:03:0e.0 0200: 8086:1026 (rev 04)
0000:05:00.0 0300: 10de:00fd (rev a2)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E]
Comments/Problems:
Preseeded automatic installation (where debconf/priority is preseeded to
"critical") fails to install a kernel. After installation completes and the
prompt to remove the disk for reboot appears, ls /target/boot shows only a
grub/ directory -- no initrd.img-* or vmlinuz-* files are present, and the file
/target/boot/grub/menu.lst is void of menu entries (no title, root, kernel, or
initrd lines).
Performing the same preseed install with the same preseed values except
debconf/priority set to "medium" results in the installer specifically asking
for a kernel and the chosen kernel being installed. A reboot then works as
expected.
Michael Peek
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
