Please note the connection to: https://lkml.org/lkml/2014/11/5/905
as presented in this answer: https://unix.stackexchange.com/a/433192/181255 2018-03-24 4:51 GMT+01:00 Tomasz Warniełło <tomasz.warnie...@gmail.com>: > Package: src:linux > Version: 4.9.82-1+deb9u3 > Severity: important > File: /lib/modules/4.9.0-6-amd64/kernel/drivers/mmc/host/rtsx_usb_sdmmc.ko > > Dear Maintainer, > > I observed high load in idle system in `top`. The load was ca. 2.00, the > CPU i5. > I checked i/o and net and didn't find load. There were always 3 processes > in the D state: > two kworkers and rtsx_usb_ms_1. I did `rmmod rtsx_usb_ms`, which didn't > help, > but then I did `rmmod rtsx_usb_sdmmc` and the load went down to 0.00. > > The situation is also described here: > https://unix.stackexchange.com/questions/433052/high- > load-on-i5-with-no-visible-reason/433192#433192 > > > -- Package-specific info: > ** Version: > Linux version 4.9.0-6-amd64 (debian-ker...@lists.debian.org) (gcc version > 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.82-1+deb9u3 > (2018-03-02) > > ** Command line: > BOOT_IMAGE=/vmlinuz-4.9.0-6-amd64 root=/dev/mapper/tomasz--laptop--f--vg-root > ro quiet acpi_osi=Linux > > ** Not tainted > > ** Kernel log: > [ 7.590362] Console: switching to colour dummy device 80x25 > [ 7.590434] [drm] Replacing VGA console driver > [ 7.592890] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b413) > [ 7.595472] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, > 655360 ms ovfl timer > [ 7.595474] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules > [ 7.595475] RAPL PMU: hw unit of domain package 2^-14 Joules > [ 7.595476] RAPL PMU: hw unit of domain dram 2^-14 Joules > [ 7.595476] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules > [ 7.600777] Intel(R) Wireless WiFi driver for Linux > [ 7.600780] Copyright(c) 2003- 2015 Intel Corporation > [ 7.601096] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 7.601097] [drm] Driver supports precise vblank timestamp query. > [ 7.603501] Bluetooth: hci0: read Intel version: 370710018002030d00 > [ 7.605666] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes= > io+mem,decodes=io+mem:owns=io+mem > [ 7.608162] bluetooth hci0: firmware: direct-loading firmware > intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq > [ 7.608166] Bluetooth: hci0: Intel Bluetooth firmware file: > intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq > [ 7.615990] iwlwifi 0000:03:00.0: firmware: direct-loading firmware > iwlwifi-7260-17.ucode > [ 7.616459] iwlwifi 0000:03:00.0: loaded firmware version 17.352738.0 > op_mode iwlmvm > [ 7.622788] snd_hda_codec_realtek hdaudioC1D0: ALC269VC: SKU not ready > 0x909701f0 > [ 7.623075] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VC: > line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker > [ 7.623077] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 > (0x0/0x0/0x0/0x0/0x0) > [ 7.623079] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 > (0x15/0x0/0x0/0x0/0x0) > [ 7.623080] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 > [ 7.623081] snd_hda_codec_realtek hdaudioC1D0: inputs: > [ 7.623083] snd_hda_codec_realtek hdaudioC1D0: Mic=0x18 > [ 7.623084] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 > [ 7.640540] uvcvideo 1-7:1.0: Entity type for entity Extension 3 was > not initialized! > [ 7.640543] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was > not initialized! > [ 7.640545] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not > initialized! > [ 7.640648] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00: > 1b.0/sound/card1/input14 > [ 7.641879] input: FJ Camera as /devices/pci0000:00/0000:00: > 14.0/usb1/1-7/1-7:1.0/input/input17 > [ 7.641976] usbcore: registered new interface driver uvcvideo > [ 7.641977] USB Video Class driver (1.1.1) > [ 7.642217] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00: > 1b.0/sound/card1/input15 > [ 7.642280] input: HDA Intel PCH Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 > [ 7.643665] intel_rapl: Found RAPL domain package > [ 7.643667] intel_rapl: Found RAPL domain core > [ 7.643668] intel_rapl: Found RAPL domain uncore > [ 7.643669] intel_rapl: Found RAPL domain dram > [ 7.651834] iwlwifi 0000:03:00.0: Detected Intel(R) Wireless N 7260, > REV=0x144 > [ 7.654762] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 7.655217] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 7.659544] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: > no) > [ 7.660680] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS: > 00/PNP0A08:00/LNXVIDEO:00/input/input18 > [ 7.665352] iTCO_vendor_support: vendor-support=0 > [ 7.667957] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 > [ 7.668017] iTCO_wdt: Found a Lynx Point TCO device (Version=2, > TCOBASE=0x1860) > [ 7.669127] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 7.680044] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops > i915_audio_component_bind_ops [i915]) > [ 7.680054] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on > minor 0 > [ 7.710550] Adding 4095996k swap on > /dev/mapper/tomasz--laptop--f--vg-swap_1. > Priority:-1 extents:1 across:4095996k SSFS > [ 7.713849] input: HDA Intel HDMI HDMI/DP,pcm=3 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input19 > [ 7.713933] input: HDA Intel HDMI HDMI/DP,pcm=7 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input20 > [ 7.713993] input: HDA Intel HDMI HDMI/DP,pcm=8 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input21 > [ 7.717724] fbcon: inteldrmfb (fb0) is primary device > [ 7.746538] EXT4-fs (sda2): mounting ext2 file system using the ext4 > subsystem > [ 7.751334] Bluetooth: hci0: Intel Bluetooth firmware patch completed > and activated > [ 7.756589] EXT4-fs (sda2): mounted filesystem without journal. Opts: > (null) > [ 7.768886] EXT4-fs (dm-2): mounted filesystem with ordered data mode. > Opts: (null) > [ 7.791410] EXT4-fs (dm-4): mounted filesystem with ordered data mode. > Opts: (null) > [ 7.791985] EXT4-fs (dm-5): mounted filesystem with ordered data mode. > Opts: (null) > [ 7.797602] systemd-journald[315]: Received request to flush runtime > journal from PID 1 > [ 7.865210] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' > [ 7.868450] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 > [ 8.127452] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 8.145099] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 8.145101] Bluetooth: BNEP filters: protocol multicast > [ 8.145105] Bluetooth: BNEP socket layer initialized > [ 8.330748] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready > [ 8.331465] r8169 0000:04:00.0: firmware: direct-loading firmware > rtl_nic/rtl8168e-3.fw > [ 8.442601] r8169 0000:04:00.0 enp4s0: link down > [ 8.442652] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready > [ 8.446129] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready > [ 8.448227] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 8.448496] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 8.658687] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 8.658988] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 8.675725] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready > [ 8.686748] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 8.687018] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 8.904260] Console: switching to colour frame buffer device 170x48 > [ 8.910233] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 8.910496] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled > [ 8.922811] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 8.928576] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready > [ 9.041156] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready > [ 9.411848] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready > [ 9.448074] wlp3s0: authenticate with e8:df:70:82:1b:3c > [ 9.451034] wlp3s0: send auth to e8:df:70:82:1b:3c (try 1/3) > [ 9.453226] wlp3s0: authenticated > [ 9.456547] wlp3s0: associate with e8:df:70:82:1b:3c (try 1/3) > [ 9.560519] wlp3s0: associate with e8:df:70:82:1b:3c (try 2/3) > [ 9.637855] wlp3s0: associate with e8:df:70:82:1b:3c (try 3/3) > [ 9.670176] wlp3s0: RX AssocResp from e8:df:70:82:1b:3c (capab=0x431 > status=0 aid=1) > [ 9.674238] wlp3s0: associated > [ 10.505198] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready > [ 10.889591] Bluetooth: RFCOMM TTY layer initialized > [ 10.889599] Bluetooth: RFCOMM socket layer initialized > [ 10.889606] Bluetooth: RFCOMM ver 1.11 > [ 20.836088] fuse init (API version 7.26) > > ** Model information > sys_vendor: FUJITSU > product_name: LIFEBOOK A544 > product_version: > chassis_vendor: FUJITSU > chassis_version: > bios_vendor: FUJITSU // Phoenix Technologies Ltd. > bios_version: Version 1.17 > board_vendor: FUJITSU > board_name: FJNBB35 > board_version: > > ** Loaded modules: > fuse > rfcomm > ctr > ccm > xt_tcpudp > xt_conntrack > bnep > iptable_mangle > iptable_nat > nf_conntrack_ipv4 > nf_defrag_ipv4 > nf_nat_ipv4 > nf_nat > nf_conntrack > iptable_filter > iptable_security > iptable_raw > arc4 > nls_ascii > nls_cp437 > vfat > fat > snd_hda_codec_hdmi > iTCO_wdt > iTCO_vendor_support > iwlmvm > intel_rapl > x86_pkg_temp_thermal > intel_powerclamp > mac80211 > kvm_intel > snd_hda_codec_realtek > kvm > snd_hda_codec_generic > irqbypass > intel_cstate > iwlwifi > intel_uncore > intel_rapl_perf > uvcvideo > videobuf2_vmalloc > videobuf2_memops > efi_pstore > btusb > pcspkr > i915 > efivars > serio_raw > btrtl > snd_hda_intel > cfg80211 > btbcm > intel_pch_thermal > btintel > videobuf2_v4l2 > snd_hda_codec > bluetooth > videobuf2_core > snd_hda_core > videodev > snd_hwdep > rfkill > snd_pcm > media > memstick > drm_kms_helper > snd_timer > drm > snd > mei_me > evdev > joydev > mei > sg > lpc_ich > soundcore > i2c_algo_bit > shpchp > ie31200_edac > edac_core > fujitsu_laptop > battery > video > ac > button > coretemp > efivarfs > ip_tables > x_tables > autofs4 > ext4 > crc16 > jbd2 > crc32c_generic > fscrypto > ecb > mbcache > algif_skcipher > af_alg > dm_crypt > dm_mod > sr_mod > cdrom > sd_mod > mmc_core > rtsx_usb > mfd_core > hid_generic > usbhid > hid > crct10dif_pclmul > crc32_pclmul > crc32c_intel > ghash_clmulni_intel > aesni_intel > aes_x86_64 > lrw > gf128mul > glue_helper > ablk_helper > cryptd > psmouse > ahci > i2c_i801 > i2c_smbus > libahci > libata > xhci_pci > xhci_hcd > scsi_mod > r8169 > mii > usbcore > usb_common > thermal > > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core > Processor DRAM Controller [8086:0c04] (rev 06) > Subsystem: Fujitsu Limited. Xeon E3-1200 v3/4th Gen Core Processor > DRAM Controller [10cf:17a6] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: <access denied> > Kernel modules: ie31200_edac > > 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core > Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 24 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > Kernel modules: shpchp > > 00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core > Processor Integrated Graphics Controller [8086:0416] (rev 06) (prog-if 00 > [VGA controller]) > Subsystem: Fujitsu Limited. 4th Gen Core Processor Integrated > Graphics Controller [10cf:17a9] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 30 > Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] > Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] > Region 4: I/O ports at 4000 [size=64] > [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] > Capabilities: <access denied> > Kernel driver in use: i915 > Kernel modules: i915 > > 00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen > Core Processor HD Audio Controller [8086:0c0c] (rev 06) > Subsystem: Fujitsu Limited. Xeon E3-1200 v3/4th Gen Core Processor > HD Audio Controller [10cf:17c6] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 32 > Region 0: Memory at f0710000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: snd_hda_intel > Kernel modules: snd_hda_intel > > 00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series > Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI]) > Subsystem: Fujitsu Limited. 8 Series/C220 Series Chipset Family > USB xHCI [10cf:17e1] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 26 > Region 0: Memory at f0700000 (64-bit, non-prefetchable) [size=64K] > Capabilities: <access denied> > Kernel driver in use: xhci_hcd > Kernel modules: xhci_pci > > 00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 > Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04) > Subsystem: Fujitsu Limited. 8 Series/C220 Series Chipset Family > MEI Controller [10cf:17dd] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 28 > Region 0: Memory at f0719000 (64-bit, non-prefetchable) [size=16] > Capabilities: <access denied> > Kernel driver in use: mei_me > Kernel modules: mei_me > > 00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series > Chipset High Definition Audio Controller [8086:8c20] (rev 04) > Subsystem: Fujitsu Limited. 8 Series/C220 Series Chipset High > Definition Audio Controller [10cf:1757] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 29 > Region 0: Memory at f0714000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: snd_hda_intel > Kernel modules: snd_hda_intel > > 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset > Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 16 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > Kernel modules: shpchp > > 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset > Family PCI Express Root Port #3 [8086:8c14] (rev d4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin C routed to IRQ 18 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > Memory behind bridge: f0600000-f06fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > Kernel modules: shpchp > > 00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset > Family PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal > decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 17 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: f0500000-f05fffff > Prefetchable memory behind bridge: 00000000f0400000- > 00000000f04fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > Kernel modules: shpchp > > 00:1f.0 ISA bridge [0601]: Intel Corporation HM86 Express LPC Controller > [8086:8c49] (rev 04) > Subsystem: Fujitsu Limited. HM86 Express LPC Controller [10cf:17c7] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: <access denied> > Kernel driver in use: lpc_ich > Kernel modules: lpc_ich > > 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series > Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 04) > (prog-if 01 [AHCI 1.0]) > Subsystem: Fujitsu Limited. 8 Series/C220 Series Chipset Family > 6-port SATA Controller 1 [AHCI mode] [10cf:17c9] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 27 > Region 0: I/O ports at 4088 [size=8] > Region 1: I/O ports at 4094 [size=4] > Region 2: I/O ports at 4080 [size=8] > Region 3: I/O ports at 4090 [size=4] > Region 4: I/O ports at 4060 [size=32] > Region 5: Memory at f071c000 (32-bit, non-prefetchable) [size=2K] > Capabilities: <access denied> > Kernel driver in use: ahci > Kernel modules: ahci > > 00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset > Family SMBus Controller [8086:8c22] (rev 04) > Subsystem: Fujitsu Limited. 8 Series/C220 Series Chipset Family > SMBus Controller [10cf:17cf] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at f0718000 (64-bit, non-prefetchable) [size=256] > Region 4: I/O ports at efa0 [size=32] > Kernel driver in use: i801_smbus > Kernel modules: i2c_i801 > > 00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series > Chipset Family Thermal Management Controller [8086:8c24] (rev 04) > Subsystem: Fujitsu Limited. 8 Series Chipset Family Thermal > Management Controller [10cf:17d0] > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at f071b000 (64-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > Kernel modules: intel_pch_thermal > > 03:00.0 Network controller [0280]: Intel Corporation Wireless 7260 > [8086:08b1] (rev 73) > Subsystem: Intel Corporation Wireless-N 7260 [8086:4062] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 31 > Region 0: Memory at f0600000 (64-bit, non-prefetchable) [size=8K] > Capabilities: <access denied> > Kernel driver in use: iwlwifi > Kernel modules: iwlwifi > > 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev > 07) > Subsystem: Fujitsu Limited. RTL8111/8168/8411 PCI Express Gigabit > Ethernet Controller [10cf:175a] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 25 > Region 0: I/O ports at 3000 [size=256] > Region 2: Memory at f0500000 (64-bit, non-prefetchable) [size=4K] > Region 4: Memory at f0400000 (64-bit, prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: r8169 > Kernel modules: r8169 > > > ** USB devices: > Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > Bus 001 Device 006: ID 8087:07dc Intel Corp. > Bus 001 Device 005: ID 04f2:b413 Chicony Electronics Co., Ltd > Bus 001 Device 004: ID 1a2c:0c23 China Resource Semico Co., Ltd > Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card > Reader Controller > Bus 001 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for > Bluetooth > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > -- System Information: > Debian Release: 9.4 > APT prefers stable-updates > APT policy: (500, 'stable-updates'), (500, 'stable') > Architecture: amd64 (x86_64) > > Kernel: Linux 4.9.0-6-amd64 (SMP w/4 CPU cores) > Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), > LANGUAGE=en_GB:en (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > Init: systemd (via /run/systemd/system) > > Versions of packages linux-image-4.9.0-6-amd64 depends on: > ii initramfs-tools [linux-initramfs-tool] 0.130 > ii kmod 23-2 > ii linux-base 4.5 > > Versions of packages linux-image-4.9.0-6-amd64 recommends: > ii firmware-linux-free 3.4 > pn irqbalance <none> > > Versions of packages linux-image-4.9.0-6-amd64 suggests: > pn debian-kernel-handbook <none> > ii grub-efi-amd64 2.02~beta3-5 > pn linux-doc-4.9 <none> > > Versions of packages linux-image-4.9.0-6-amd64 is related to: > pn firmware-amd-graphics <none> > pn firmware-atheros <none> > pn firmware-bnx2 <none> > pn firmware-bnx2x <none> > pn firmware-brcm80211 <none> > pn firmware-cavium <none> > pn firmware-intel-sound <none> > pn firmware-intelwimax <none> > pn firmware-ipw2x00 <none> > pn firmware-ivtv <none> > ii firmware-iwlwifi 20161130-3 > pn firmware-libertas <none> > pn firmware-linux-nonfree <none> > pn firmware-misc-nonfree <none> > pn firmware-myricom <none> > pn firmware-netxen <none> > pn firmware-qlogic <none> > ii firmware-realtek 20161130-3 > pn firmware-samsung <none> > pn firmware-siano <none> > pn firmware-ti-connectivity <none> > pn xen-hypervisor <none> > > -- no debconf information >
