Package: firmware-atheros https://packages.debian.org/stretch/firmware-atheros https://packages.debian.org/jessie/firmware-atheros https://packages.debian.org/jessie-backports/firmware-atheros
Severity: normal Tags: stretch jessie ath9k Dear Maintainer, I report that I can not connect to a network using the Atheros firmware. However, the device works properly but does not connect to a network. It works on jessie but does not work on stretch. This has been tested. Remembering that I am following the Debian documentation https://wiki.debian.org/ath9k_htc Linux wireless documentation: https://wireless.wiki.kernel.org/en/ users/drivers/ath9k -- System Information: Debian Release: 9.1 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.9.0-3-amd64 (SMP w/4 CPU cores) Locale: LANG=pt_BR.utf8, LC_CTYPE=pt_BR.utf8 (charmap=UTF-8), LANGUAGE=pt_BR:pt:en (charmap=UTF-8) Log sudo dmesg [ 0.974410] ahci 0000:00:1f.2: version 3.0 [ 0.974671] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.984865] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x1d impl SATA mode [ 0.984883] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 1.018788] scsi host0: ahci [ 1.018967] scsi host1: ahci [ 1.019151] scsi host2: ahci [ 1.019272] scsi host3: ahci [ 1.019401] scsi host4: ahci [ 1.019522] scsi host5: ahci [ 1.019584] ata1: SATA max UDMA/133 abar m2048@0x90608000 port 0x90608100 irq 25 [ 1.019585] ata2: DUMMY [ 1.019587] ata3: SATA max UDMA/133 abar m2048@0x90608000 port 0x90608200 irq 25 [ 1.019589] ata4: SATA max UDMA/133 abar m2048@0x90608000 port 0x90608280 irq 25 [ 1.019592] ata5: SATA max UDMA/133 abar m2048@0x90608000 port 0x90608300 irq 25 [ 1.019592] ata6: DUMMY [ 1.281887] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.301870] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.333812] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.387800] ata1.00: ATA-8: TOSHIBA MQ01ABD032, AX001F, max UDMA/100 [ 1.387805] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.390148] ata1.00: configured for UDMA/100 [ 1.390673] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 1F PQ: 0 ANSI: 5 [ 1.430294] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.430310] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.430937] hub 1-1:1.0: USB hub found [ 1.431077] hub 1-1:1.0: 6 ports detected [ 1.450551] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.450557] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.451200] hub 2-1:1.0: USB hub found [ 1.451339] hub 2-1:1.0: 6 ports detected [ 1.717827] usb 1-1.4: new high-speed USB device number 3 using ehci-pci [ 1.745454] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.747641] ata3.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SC00, max UDMA/100 [ 1.752105] ata3.00: configured for UDMA/100 [ 1.764503] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SC00 PQ: 0 ANSI: 5 [ 1.775537] random: fast init done [ 1.817813] tsc: Refined TSC clocksource calibration: 2095.243 MHz [ 1.817830] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e33a2d1c95, max_idle_ns: 440795290169 ns [ 1.830198] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1028 [ 1.830203] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.830206] usb 1-1.4: Product: WebCam SC-03FFL11939N [ 1.830208] usb 1-1.4: Manufacturer: Image Processor [ 1.890230] psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5130] [ 1.924941] psmouse serio1: synaptics: queried min coordinates: x [1196..], y [878..] [ 1.990126] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xf00133/0x240000/0xa2400/0x0, board id: 1871, fw id: 1097399 [ 2.032167] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/ serio1/input/input2 [ 2.097944] ata4: SATA link down (SStatus 0 SControl 300) [ 2.413891] ata5: SATA link down (SStatus 0 SControl 300) [ 2.421458] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.421463] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.421630] sd 0:0:0:0: [sda] Write Protect is off [ 2.421637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.421699] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.446860] sr 2:0:0:0: [sr0] scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.446866] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.447436] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.557979] sda: sda1 sda2 < sda5 > [ 2.559453] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.842127] clocksource: Switched to clocksource tsc [ 2.911369] PM: Starting manual resume from disk [ 2.911374] PM: Hibernation image partition 8:5 present [ 2.911375] PM: Looking for hibernation image. [ 2.911647] PM: Image not found (code -22) [ 2.911649] PM: Hibernation image not present or could not be loaded. [ 3.224319] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.845042] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.043117] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 5.043454] systemd[1]: Detected architecture x86-64. [ 5.058392] systemd[1]: Set hostname to <debian-pc>. [ 5.226236] random: crng init done [ 6.951691] systemd[1]: Reached target Remote File Systems. [ 6.952166] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.952501] systemd[1]: Created slice User and Session Slice. [ 6.952605] systemd[1]: Listening on Syslog Socket. [ 6.952696] systemd[1]: Listening on udev Control Socket. [ 6.952948] systemd[1]: Created slice System Slice. [ 6.954146] systemd[1]: Mounting POSIX Message Queue File System... [ 7.849836] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 8.013460] lp: driver loaded but no devices found [ 8.149275] systemd-journald[217]: Received request to flush runtime journal from PID 1 [ 8.321517] ppdev: user-space parallel port driver [ 8.353725] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 8.489090] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 11.709777] wmi: Mapper loaded [ 11.829747] ACPI: AC Adapter [ADP1] (off-line) [ 11.830621] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS: 00/PNP0C0D:00/input/input3 [ 11.830625] ACPI: Lid Switch [LID0] [ 11.830675] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS: 00/PNP0C0C:00/input/input4 [ 11.830678] ACPI: Power Button [PWRB] [ 11.830723] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN: 00/input/input5 [ 11.830725] ACPI: Power Button [PWRF] [ 11.972720] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 11.972721] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 11.972722] RAPL PMU: hw unit of domain package 2^-16 Joules [ 11.972723] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 12.002319] ACPI: Battery Slot [BAT1] (battery present) [ 12.053316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.076748] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 12.122782] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.122826] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 12.197197] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160831/utaddress-247) [ 12.197204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.197207] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247) [ 12.197211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.197212] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247) [ 12.197215] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.197215] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160831/utaddress-247) [ 12.197218] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.197219] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 12.568415] [drm] Initialized [ 12.709859] samsung_laptop: detected SABI interface: SwSmi@ [ 12.977157] Intel(R) Wireless WiFi driver for Linux [ 12.977161] Copyright(c) 2003- 2015 Intel Corporation [ 12.977483] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 13.012353] iwlwifi 0000:01:00.0: firmware: direct-loading firmware iwlwifi-100-5.ucode [ 13.012593] iwlwifi 0000:01:00.0: loaded firmware version 39.31.5.1 build 32895 op_mode iwldvm [ 13.092825] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 13.092830] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 13.092832] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 13.092836] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 100 BGN, REV=0x6C [ 13.094950] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 13.154158] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 13.220198] iTCO_vendor_support: vendor-support=0 [ 13.230319] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 13.230377] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 13.230546] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 13.478990] [drm] Memory usable by graphics device = 2048M [ 13.478994] [drm] Replacing VGA console driver [ 13.479684] Console: switching to colour dummy device 80x25 [ 13.485418] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 13.485421] [drm] Driver supports precise vblank timestamp query. [ 13.488003] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes= io+mem,decodes=io+mem:owns=io+mem [ 13.521075] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 13.521251] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS: 00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 13.521404] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0 [ 13.524297] fbcon: inteldrmfb (fb0) is primary device [ 14.002428] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 14.002432] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.002435] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 14.002438] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 14.002439] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 14.002443] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19 [ 14.002446] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18 [ 14.594668] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 14.594675] Console: switching to colour frame buffer device 170x48 [ 14.599378] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00: 1b.0/sound/card0/input8 [ 14.599600] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.599808] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.616552] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 14.858875] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 [ 14.977355] intel_rapl: Found RAPL domain package [ 14.977359] intel_rapl: Found RAPL domain core [ 14.977361] intel_rapl: Found RAPL domain uncore [ 14.977371] intel_rapl: RAPL package 0 domain package locked by BIOS [ 15.132069] media: Linux media interface: v0.10 [ 15.157513] Linux video capture interface: v2.00 [ 15.294450] uvcvideo: Found UVC 1.00 device WebCam SC-03FFL11939N (2232:1028) [ 15.312776] uvcvideo 1-1.4:1.0: Entity type for entity Processing 3 was not initialized! [ 15.312781] uvcvideo 1-1.4:1.0: Entity type for entity Extension 2 was not initialized! [ 15.312783] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized! [ 15.312934] input: WebCam SC-03FFL11939N as /devices/pci0000:00/0000:00: 1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input11 [ 15.313051] usbcore: registered new interface driver uvcvideo [ 15.313052] USB Video Class driver (1.1.1) [ 15.572599] Adding 2007036k swap on /dev/sda5. Priority:-1 extents:1 across:2007036k FS [ 17.297166] usb 2-1.1: new full-speed USB device number 3 using ehci-pci [ 17.408619] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c52f [ 17.408625] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 17.408628] usb 2-1.1: Product: USB Receiver [ 17.408631] usb 2-1.1: Manufacturer: Logitech [ 18.053976] hidraw: raw HID events driver (C) Jiri Kosina [ 18.284598] usbcore: registered new interface driver usbhid [ 18.284601] usbhid: USB HID core driver [ 18.434766] input: Logitech USB Receiver as /devices/pci0000:00/0000:00: 1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:046D:C52F.0001/input/input12 [ 18.435049] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0 [ 18.436105] input: Logitech USB Receiver as /devices/pci0000:00/0000:00: 1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:046D:C52F.0002/input/input13 [ 18.493701] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1 [ 18.539490] vboxdrv: loading out-of-tree module taints kernel. [ 18.547981] vboxdrv: Found 4 processor cores [ 18.565379] vboxdrv: TSC mode is Invariant, tentative frequency 2095241599 Hz [ 18.565381] vboxdrv: Successfully loaded version 5.0.40 (interface 0x00240000) [ 19.881821] VBoxNetFlt: Successfully started. [ 20.862959] VBoxNetAdp: Successfully started. [ 20.948724] VBoxPciLinuxInit [ 21.152586] vboxpci: IOMMU not found (not registered) [ 27.058369] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 27.058726] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2) [ 27.058825] r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168e-3.fw failed with error -2 [ 27.058831] r8169 0000:02:00.0 enp2s0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2) [ 27.078934] r8169 0000:02:00.0 enp2s0: link down [ 27.079007] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 27.108087] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 27.110428] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 27.117837] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 27.117941] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 27.164811] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 27.172219] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 27.172323] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 27.206232] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 27.214540] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 27.221924] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 27.222026] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 27.268458] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 27.275860] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 27.275961] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 27.310390] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 28.321966] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 60.854337] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 60.861913] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 60.862018] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 60.907305] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 60.914695] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 60.914797] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 60.949258] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 61.438538] wlp1s0: authenticate with 00:26:5a:b2:77:a6 [ 61.443807] wlp1s0: send auth to 00:26:5a:b2:77:a6 (try 1/3) [ 61.446174] wlp1s0: authenticated [ 61.447248] wlp1s0: associate with 00:26:5a:b2:77:a6 (try 1/3) [ 61.451375] wlp1s0: RX AssocResp from 00:26:5a:b2:77:a6 (capab=0xc31 status=0 aid=5) [ 61.457140] wlp1s0: associated [ 61.457232] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 135.155911] usb 2-1.2: new high-speed USB device number 4 using ehci-pci [ 135.281568] usb 2-1.2: New USB device found, idVendor=0cf3, idProduct=9271 [ 135.281574] usb 2-1.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 135.281578] usb 2-1.2: Product: USB2.0 WLAN [ 135.281581] usb 2-1.2: Manufacturer: ATHEROS [ 135.281584] usb 2-1.2: SerialNumber: 12345 [ 135.655682] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:7ed7:a95f:1bc9:15fa DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354787 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 135.655716] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:7ed7:a95f:1bc9:15fa DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=1031983 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 135.665975] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:7ed7:a95f:1bc9:15fa DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=354787 PROTO=UDP SPT=8612 DPT=8612 LEN=24 [ 135.665999] [UFW BLOCK] IN=wlp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:7ed7:a95f:1bc9:15fa DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=1031983 PROTO=UDP SPT=8612 DPT=8610 LEN=24 [ 135.748466] usb 2-1.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 135.748636] usbcore: registered new interface driver ath9k_htc [ 135.772628] usb 2-1.2: firmware: direct-loading firmware ath9k_htc/htc_9271-1.4.0.fw [ 136.062040] usb 2-1.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 136.312897] ath9k_htc 2-1.2:1.0: ath9k_htc: HTC initialized with 33 credits [ 136.546501] ath9k_htc 2-1.2:1.0: ath9k_htc: FW Version: 1.4 [ 136.546507] ath9k_htc 2-1.2:1.0: FW RMW support: On [ 136.546510] ath: EEPROM regdomain: 0x809c [ 136.546512] ath: EEPROM indicates we should expect a country code [ 136.546514] ath: doing EEPROM country->regdmn map search [ 136.546516] ath: country maps to regdmn code: 0x52 [ 136.546518] ath: Country alpha2 being used: CN [ 136.546519] ath: Regpair used: 0x52 [ 136.558676] ieee80211 phy1: Atheros AR9271 Rev:1 [ 136.574196] ath9k_htc 2-1.2:1.0 wlxe894f6285298: renamed from wlan0 [ 136.614335] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 136.749694] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 136.928525] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 136.969580] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 138.714869] wlp1s0: deauthenticating from 00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 138.733798] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 138.741203] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 138.741305] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 138.786891] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 138.794316] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 138.794414] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 138.828258] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 142.769477] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 150.533585] wlxe894f6285298: authenticate with 00:26:5a:b2:77:a6 [ 150.725072] wlxe894f6285298: send auth to 00:26:5a:b2:77:a6 (try 1/3) [ 150.732169] wlxe894f6285298: authenticated [ 155.729297] wlxe894f6285298: aborting authentication with 00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 157.071754] wlxe894f6285298: authenticate with 00:26:5a:b2:77:a6 [ 157.265714] wlxe894f6285298: send auth to 00:26:5a:b2:77:a6 (try 1/3) [ 157.273008] wlxe894f6285298: authenticated [ 162.269269] wlxe894f6285298: aborting authentication with 00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 164.038142] wlxe894f6285298: authenticate with 00:26:5a:b2:77:a6 [ 164.228022] wlxe894f6285298: send auth to 00:26:5a:b2:77:a6 (try 1/3) [ 164.230380] wlxe894f6285298: authenticated [ 169.228625] wlxe894f6285298: aborting authentication with 00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 171.456520] wlxe894f6285298: authenticate with 00:26:5a:b2:77:a6 [ 171.645193] wlxe894f6285298: send auth to 00:26:5a:b2:77:a6 (try 1/3) [ 171.648397] wlxe894f6285298: authenticated [ 174.621021] wlxe894f6285298: aborting authentication with 00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 174.693321] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 174.866291] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 224.566776] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 224.574558] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 224.574669] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 224.623522] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 224.630970] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 224.631067] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 224.665048] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 225.188867] wlp1s0: authenticate with 00:26:5a:b2:77:a6 [ 225.193984] wlp1s0: send auth to 00:26:5a:b2:77:a6 (try 1/3) [ 225.196320] wlp1s0: authenticated [ 225.199215] wlp1s0: associate with 00:26:5a:b2:77:a6 (try 1/3) [ 225.203097] wlp1s0: RX AssocResp from 00:26:5a:b2:77:a6 (capab=0xc31 status=0 aid=5) [ 225.210379] wlp1s0: associated [ 225.210474] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 235.209782] wlp1s0: deauthenticating from 00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 235.735840] wlp1s0: authenticate with 00:26:5a:b2:77:a6 [ 235.739928] wlp1s0: send auth to 00:26:5a:b2:77:a6 (try 1/3) [ 235.742464] wlp1s0: authenticated [ 235.745530] wlp1s0: associate with 00:26:5a:b2:77:a6 (try 1/3) [ 235.749517] wlp1s0: RX AssocResp from 00:26:5a:b2:77:a6 (capab=0xc31 status=0 aid=5) [ 235.755368] wlp1s0: associated [ 239.474572] wlp1s0: deauthenticating from 00:26:5a:b2:77:a6 by local choice (Reason: 3=DEAUTH_LEAVING) [ 239.487819] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 239.495227] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 239.495322] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 239.541182] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 239.548585] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 239.548683] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 239.586615] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 241.220717] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 241.228112] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 241.228210] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 241.272999] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 241.280405] iwlwifi 0000:01:00.0: L1 Enabled - LTR Disabled [ 241.280505] iwlwifi 0000:01:00.0: Radio type=0x0-0x0-0x3 [ 241.318817] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready [ 241.363702] wlp1s0: authenticate with 00:26:5a:b2:77:a6 [ 241.366848] wlp1s0: send auth to 00:26:5a:b2:77:a6 (try 1/3) [ 241.369169] wlp1s0: authenticated [ 241.372597] wlp1s0: associate with 00:26:5a:b2:77:a6 (try 1/3) [ 241.376476] wlp1s0: RX AssocResp from 00:26:5a:b2:77:a6 (capab=0xc31 status=0 aid=5) [ 241.383206] wlp1s0: associated [ 241.383293] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready [ 518.763984] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 833.732377] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 1148.718927] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready [ 1463.693279] IPv6: ADDRCONF(NETDEV_UP): wlxe894f6285298: link is not ready
