Hello Benno, at the time of my first report in 2014, I used a PowerPC architecture (Apple B&W G3). In the meantime, I set up that machine completely new as backup server and the old configuration is no longer available. Maybe, that is the explanation for the former strange version number.
> your nano has a strange version number: 2.2.6-1+b1. That version I cannot > find > anywhere in Debian. The only 2.2.6 version is in oldstable, and that is > 2.2.6-3 > (https://packages.debian.org/source/oldstable/nano). So... Did you compile > nano > yourself? Or are you on something else than plain Debian?) Today, I use nano version 2.2.6-3 on amd64 standard Debian 8.8, but the problems with nano seem to be the same. Here the updated System Information from reportbug for today: ---- Debian Release: 8.8 APT prefers oldstable-updates APT policy: (500, 'oldstable-updates'), (500, 'oldstable') Architecture: amd64 (x86_64) Kernel: Linux 4.9.0-0.bpo.3-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages nano depends on: ii dpkg 1.17.27 ii install-info 5.2.0.dfsg.1-6 ii libc6 2.19-18+deb8u10 ii libncursesw5 5.9+20140913-1+b1 ii libtinfo5 5.9+20140913-1+b1 nano recommends no packages. Versions of packages nano suggests: pn spell <none> ---- > To figure out what is going wrong, please move your /etc/nanorc and your > .nanorc > to a safe place, and then force a reinstall of nano. This should put a > correct > /etc/nanorc back into your filesystem. I did this with apt-get purge and apt-get install, /etc/nanorc is identical with the backup. > Check whether shell scripts are colored > correctly now. They are, tested for two shell scripts with one example for filename-ending recognition and one example for header recognition. > If yes, then again make your one-line .nanorc, that does an include > of your self-made awk.nanorc. Then check again if shell scripts get colored > okay. > If not, then please show me the exact contents of your .nanorc, your > awk.nanorc, > and your /etc/nanorc. Both examples dont get colored any more. I append the requested files, as well as both examples. > I suspect that that rumour was caused by your bug report three years ago. :) This would be a very special sample for a common issue with rumours, they might obscure a self-referencing structure! Best regards, Bernward.
include "~/.nano/awk.nanorc"
## Here is an example for awk.
## white, black, red, blue, green, yellow, magenta, and cyan
##
syntax "awk" "\.awk$"
header "^#!/usr/bin/g?awk"
## records
icolor brightred "\$[0-9A-Z_!@#$*?-]+"
## awk-set variables
color red "\<(ARGC|ARGIND|ARGV|BINMODE|CONVFMT|ENVIRON|ERRNO|FIELDWIDTHS)\>"
color red "\<(FILENAME|FNR|FS|IGNORECASE|LINT|NF|NR|OFMT|OFS|ORS)\>"
color red "\<(PROCINFO|RS|RT|RSTART|RLENGTH|SUBSEP|TEXTDOMAIN)\>"
## function declarations and special patterns
color brightgreen "\<(function|extension|BEGIN|END)\>"
## operators
color green "(\{|\}|\(|\)|\;|\]|\[|\\|<|>|!|=|&|\+|-|\*|%|/|\?:|\^|\|)"
## flow control
color brightyellow "\<(for|if|while|do|else|in|delete|exit)\>"
color brightyellow "\<(break|continue|return)\>"
## I/O statements
color brightgreen "\<(close|getline|next|nextfile|print|printf)\>"
color brightgreen "\<(system|fflush)\>"
## standard functions
color magenta "\<(atan2|cos|exp|int|log|rand|sin|sqrt|srand)\>"
color magenta "\<(asort|asorti|gensub|gsub|index|length|match)\>"
color magenta "\<(split|sprintf|strtonum|sub|substr|tolower|toupper)\>"
color magenta "\<(mktime|strftime|systime)\>"
color magenta "\<(and|compl|lshift|or|rshift|xor)\>"
color magenta "\<(bindtextdomain|dcgettext|dcngettext)\>"
##
## String highlighting. You will in general want your comments and
## strings to come last, because syntax highlighting rules will be
## applied in the order they are read in.
color blue "<[^= ]*>" ""(\\.|[^"])*""
## Comment highlighting
color brightblue "(^|[[:space:]])#.*$"
## Trailing whitespace
color ,green "[[:space:]]+$"
## Sample initialization file for GNU nano.
##
## Please note that you must have configured nano with --enable-nanorc
## for this file to be read! Also note that this file should not be in
## DOS or Mac format, and that characters specially interpreted by the
## shell should not be escaped here.
##
## To make sure a value is disabled, use "unset <option>".
##
## For the options that take parameters, the default value is given.
## Other options are unset by default.
##
## Quotes inside string parameters don't have to be escaped with
## backslashes. The last double quote in the string will be treated as
## its end. For example, for the "brackets" option, ""')>]}" will match
## ", ', ), >, ], and }.
## Use auto-indentation.
# set autoindent
## Backup files to filename~.
# set backup
## The directory to put unique backup files in.
# set backupdir ""
## Do backwards searches by default.
# set backwards
## Use bold text instead of reverse video text.
# set boldtext
## The characters treated as closing brackets when justifying
## paragraphs. They cannot contain blank characters. Only closing
## punctuation, optionally followed by closing brackets, can end
## sentences.
##
# set brackets ""')>]}"
## Do case sensitive searches by default.
# set casesensitive
## Constantly display the cursor position in the statusbar. Note that
## this overrides "quickblank".
# set const
## Use cut to end of line by default.
# set cut
## Set the line length for wrapping text and justifying paragraphs.
## If fill is 0 or less, the line length will be the screen width less
## this number.
##
# set fill -8
## Enable ~/.nano_history for saving and reading search/replace strings.
set historylog
## The opening and closing brackets that can be found by bracket
## searches. They cannot contain blank characters. The former set must
## come before the latter set, and both must be in the same order.
##
# set matchbrackets "(<[{)>]}"
## Use the blank line below the titlebar as extra editing space.
# set morespace
## Enable mouse support, if available for your system. When enabled,
## mouse clicks can be used to place the cursor, set the mark (with a
## double click), and execute shortcuts. The mouse will work in the X
## Window System, and on the console when gpm is running.
##
# set mouse
## Allow multiple file buffers (inserting a file will put it into a
## separate buffer). You must have configured with --enable-multibuffer
## for this to work.
##
# set multibuffer
## Don't convert files from DOS/Mac format.
# set noconvert
## Don't follow symlinks when writing files.
# set nofollow
## Don't display the helpful shortcut lists at the bottom of the screen.
# set nohelp
## Don't add newlines to the ends of files.
# set nonewlines
## Don't wrap text at all.
set nowrap
## Set operating directory. nano will not read or write files outside
## this directory and its subdirectories. Also, the current directory
## is changed to here, so any files are inserted from this dir. A blank
## string means the operating directory feature is turned off.
##
# set operatingdir ""
## Preserve the XON and XOFF keys (^Q and ^S).
# set preserve
## The characters treated as closing punctuation when justifying
## paragraphs. They cannot contain blank characters. Only closing
## punctuation, optionally followed by closing brackets, can end
## sentences.
##
# set punct "!.?"
## Do quick statusbar blanking. Statusbar messages will disappear after
## 1 keystroke instead of 26. Note that "const" overrides this.
##
# set quickblank
## The email-quote string, used to justify email-quoted paragraphs.
## This is an extended regular expression if your system supports them,
## otherwise a literal string. Default:
# set quotestr "^([ ]*[#:>\|}])+"
## if you have extended regular expression support, otherwise:
# set quotestr "> "
## Fix Backspace/Delete confusion problem.
# set rebinddelete
## Fix numeric keypad key confusion problem.
# set rebindkeypad
## Do extended regular expression searches by default.
# set regexp
## Make the Home key smarter. When Home is pressed anywhere but at the
## very beginning of non-whitespace characters on a line, the cursor
## will jump to that beginning (either forwards or backwards). If the
## cursor is already at that position, it will jump to the true
## beginning of the line.
# set smarthome
## Use smooth scrolling as the default.
# set smooth
## Use this spelling checker instead of the internal one. This option
## does not properly have a default value.
##
# set speller "aspell -x -c"
## Allow nano to be suspended.
set suspend
## Use this tab size instead of the default; it must be greater than 0.
# set tabsize 8
## Convert typed tabs to spaces.
# set tabstospaces
## Save automatically on exit, don't prompt.
# set tempfile
## Disallow file modification. Why would you want this in an rcfile? ;)
# set view
## The two single-column characters used to display the first characters
## of tabs and spaces. 187 in ISO 8859-1 (0000BB in Unicode) and 183 in
## ISO-8859-1 (0000B7 in Unicode) seem to be good values for these.
# set whitespace " "
## Detect word boundaries more accurately by treating punctuation
## characters as parts of words.
# set wordbounds
## Enable the new (EXPERIMENTAL) generic undo code, not just for line cuts
# set undo
## Enable soft line wrapping (AKA full line display)
# set softwrap
## Color setup
##
## Format:
##
## syntax "short description" ["filename regex" ...]
##
## The "none" syntax is reserved; specifying it on the command line is
## the same as not having a syntax at all. The "default" syntax is
## special: it takes no filename regexes, and applies to files that
## don't match any other syntax's filename regexes.
##
## color foreground,background "regex" ["regex"...]
## or
## icolor foreground,background "regex" ["regex"...]
##
## "color" will do case sensitive matches, while "icolor" will do case
## insensitive matches.
##
## Valid colors: white, black, red, blue, green, yellow, magenta, cyan.
## For foreground colors, you may use the prefix "bright" to get a
## stronger highlight.
##
## To use multi-line regexes, use the start="regex" end="regex"
## [start="regex" end="regex"...] format.
##
## If your system supports transparency, not specifying a background
## color will use a transparent color. If you don't want this, be sure
## to set the background color to black or white.
##
## If you wish, you may put your syntaxes in separate files. You can
## make use of such files (which can only include "syntax", "color", and
## "icolor" commands) as follows:
##
## include "/path/to/syntax_file.nanorc"
##
## Unless otherwise noted, the name of the syntax file (without the
## ".nanorc" extension) should be the same as the "short description"
## name inside that file. These names are kept fairly short to make
## them easier to remember and faster to type using nano's -Y option.
##
## All regexes should be extended regular expressions.
## Key bindings
## Please see nanorc(5) for more details on this
##
## Here are some samples to get you going
##
# bind M-W nowrap main
# bind M-A casesens search
# bind ^S research main
## Set this if your backspace key sends delete most of the time (2.1.3+)
# bind kdel backspace all
## Nanorc files
include "/usr/share/nano/nanorc.nanorc"
## C/C++
include "/usr/share/nano/c.nanorc"
## Cascading Style Sheets
include "/usr/share/nano/css.nanorc"
## Debian files
include "/usr/share/nano/debian.nanorc"
## Gentoo files
include "/usr/share/nano/gentoo.nanorc"
## HTML
include "/usr/share/nano/html.nanorc"
## PHP
include "/usr/share/nano/php.nanorc"
## TCL
include "/usr/share/nano/tcl.nanorc"
## TeX
include "/usr/share/nano/tex.nanorc"
## Quoted emails (under e.g. mutt)
include "/usr/share/nano/mutt.nanorc"
## Patch files
include "/usr/share/nano/patch.nanorc"
## Manpages
include "/usr/share/nano/man.nanorc"
## Groff
include "/usr/share/nano/groff.nanorc"
## Perl
include "/usr/share/nano/perl.nanorc"
## Python
include "/usr/share/nano/python.nanorc"
## Ruby
include "/usr/share/nano/ruby.nanorc"
## Java
include "/usr/share/nano/java.nanorc"
## AWK
include "/usr/share/nano/awk.nanorc"
## Assembler
include "/usr/share/nano/asm.nanorc"
## Bourne shell scripts
include "/usr/share/nano/sh.nanorc"
## POV-Ray
include "/usr/share/nano/pov.nanorc"
## XML-type files
include "/usr/share/nano/xml.nanorc"
dict.sh
Description: Bourne shell script
#!/bin/bash
#
# $Log$
#
# aus addbib erzeugt.
BIBDIR=~/bib
BIBSRC=$BIBDIR/bib.utf8
BIB=bib.ref
TEMPLATE=~/bib/template.ref
function help
{
clear
echo -e \
"editbib - öffnet die Literaturdatenbank zum Editieren.
Der Cursor wird auf den Eintrag gesetzt, dessen Label
auf der Befehlszeile oder interaktiv angegeben wurde.
Passt das Suchmuster auf mehrere Einträge, so wird der
erste Fund verwendet.
Nach Schließen der Datei folgt make bib.ref.
Aufruf:\teditbib [Suchmuster]
=============================================
"
}
function user_input
{
echo
echo "Suchmuster: $LABEL"
echo "gefunden:"
grep "^%L $LABEL" $BIBSRC | cut -d' ' -f2 | sort
echo
echo "Welches Label hat der zu editierender Eintrag?"
echo "Eingabe: OK=ENTER, oder geändertes Suchmuster"
read LABEL_CHANGED
clear
}
# Initialisierung von LABEL und LABEL_CHANGED
LABEL=""
if [ $# != 1 ]
then
help
user_input # liest LABEL_CHANGED ein
else
LABEL_CHANGED=$1
fi
while [ $LABEL_CHANGED ]
do
LABEL=$LABEL_CHANGED
user_input
done
echo "Akzeptierts Suchmuster für Label war <$LABEL>"
STARTZEILE=`grep --line-number "^%L $LABEL" $BIBSRC --max-count=1 | cut -d: -f1`
echo "Eintrag beginnt in Zeile $STARTZEILE"
nano +$STARTZEILE $BIBSRC
cd $BIBDIR
make $BIB
