Source: mricron Version: 0.20140804.1~dfsg.1-2 Severity: serious This might be a bug in fpc?
https://buildd.debian.org/status/fetch.php?pkg=mricron&arch=armhf&ver=0.20140804.1~dfsg.1-2&stamp=1484442821&raw=0 ... (3104) Compiling parconvert.pas /«PKGBUILDDIR»/dcm2nii/parconvert.pas(340,40) Hint: (5057) Local variable "dz" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(340,36) Hint: (5057) Local variable "dy" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(340,32) Hint: (5057) Local variable "dx" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(238,42) Hint: (5024) Parameter "lDICOMdata" not used /«PKGBUILDDIR»/dcm2nii/parconvert.pas(496,17) Hint: (5057) Local variable "lRangeRA" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(511,42) Hint: (5057) Local variable "linPos" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(707,123) Hint: (5057) Local variable "lInterceptRAx" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(707,96) Hint: (5057) Local variable "lSlopeRAx" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(411,10) Hint: (5028) Local const "kASL" is not used /«PKGBUILDDIR»/dcm2nii/parconvert.pas(429,4) Note: (5027) Local variable "lScanResX" is assigned but never used /«PKGBUILDDIR»/dcm2nii/parconvert.pas(429,14) Note: (5027) Local variable "lScanResY" is assigned but never used /«PKGBUILDDIR»/dcm2nii/parconvert.pas(430,36) Note: (5025) Local variable "lSortedSliceSequence" not used /«PKGBUILDDIR»/dcm2nii/parconvert.pas(972,41) Hint: (5091) Local variable "lExt" of a managed type does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(972,36) Hint: (5091) Local variable "lPathWName" of a managed type does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,212) Hint: (5057) Local variable "lDTIra" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,192) Hint: (5057) Local variable "lnum4Ddatasets" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,177) Hint: (5057) Local variable "lInterceptRA" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,164) Hint: (5057) Local variable "lSlopeRA" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,154) Hint: (5057) Local variable "lRescaleEntries" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,138) Hint: (5057) Local variable "lOffsetTableEntries" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,118) Hint: (5057) Local variable "lOffset_pos_table" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,85) Hint: (5091) Local variable "lDynStr" of a managed type does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,54) Hint: (5057) Local variable "lImageFormatOK" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,39) Hint: (5057) Local variable "lHdrOK" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,32) Hint: (5057) Local variable "lDICOMdata" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1088,21) Hint: (5057) Local variable "lNHdr" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1155,51) Hint: (4081) Converting the operands to "Int64" before doing the multiply could prevent overflow errors. /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1158,31) Hint: (4081) Converting the operands to "Int64" before doing the multiply could prevent overflow errors. /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1167,58) Hint: (4079) Converting the operands to "Int64" before doing the add could prevent overflow errors. /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1179,25) Hint: (5057) Local variable "lAHdr" does not seem to be initialized /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1249,9) Hint: (4080) Converting the operands to "Int64" before doing the subtract could prevent overflow errors. /«PKGBUILDDIR»/dcm2nii/parconvert.pas(1052,43) Note: (5025) Local variable "lSwap" not used /«PKGBUILDDIR»/dcm2nii/parconvert.pas(6,34) Hint: (5023) Unit "dicom" not used in parconvert /«PKGBUILDDIR»/dcm2nii/parconvert.pas(6,60) Hint: (5023) Unit "nii_4dto3d" not used in parconvert /«PKGBUILDDIR»/dcm2nii/parconvert.pas(10,6) Hint: (5023) Unit "dialogsx" not used in parconvert (9009) Assembling parconvert parconvert.s: Assembler messages: parconvert.s:3121: Error: co-processor offset out of range parconvert.s:3128: Error: co-processor offset out of range parconvert.s:3211: Error: co-processor offset out of range parconvert.s:3216: Error: co-processor offset out of range parconvert.s:3221: Error: co-processor offset out of range parconvert.s:3223: Error: co-processor offset out of range parconvert.s:3226: Error: co-processor offset out of range parconvert.s:3229: Error: co-processor offset out of range parconvert.s:3242: Error: co-processor offset out of range parconvert.s:3247: Error: co-processor offset out of range parconvert.s:3252: Error: co-processor offset out of range parconvert.s:4064: Error: co-processor offset out of range parconvert.s:4068: Error: co-processor offset out of range parconvert.s:4072: Error: co-processor offset out of range parconvert.s:4076: Error: co-processor offset out of range parconvert.s:4144: Error: co-processor offset out of range parconvert.s:4148: Error: co-processor offset out of range parconvert.pas(1375) Error: (9007) Error while assembling exitcode 1 parconvert.pas(1375) Fatal: (10026) There were 2 errors compiling module, stopping Fatal: (1018) Compilation aborted Error: /usr/bin/ppcarm returned an error exitcode Error: (lazarus) Compile Project, Target: dcm2nii: stopped with exit code 256 ERROR: failed compiling of project /«PKGBUILDDIR»/dcm2nii/dcm2nii.lpi debian/rules:12: recipe for target 'override_dh_auto_build' failed make[1]: *** [override_dh_auto_build] Error 2
