On Tue, 31 Jan 2006, Vincent Danjean wrote:
Can you try
Daniel Kobras wrote:
On Fri, Dec 09, 2005 at 04:41:36PM -0500, Faheem Mitha wrote:
" Suppose we are trying to push/pull between two repos using ssh://
protocol, one local and one remote, then, if the local repos exists, and
the
remote repos does not, pushing to or pulling from the remote repos will
hang, seemingly indefinitely. "
It seems possible this is a Debian specific bug, since Benoit Boissinot
says
he cannot reproduce it.
I do not succeed in reproducing it, me neither. Can you tell me what is
exactely your environment (linux distribution, ssh version, hg version,
specific .ssh/config options, ...) for both sides ?
Daniel: which backport of mercurial do you use when you experiment
this bug from a sarge->unstable connection ?
I just upload the 0.8 version of mercurial in the incomming queue. It
should be in the unstable distribution tomorrow. Can you check if the
problem is still here with this version ?
I can still reproduce the problem with 0.8, sorry.
Both machines are Debian sarge (stable) and have the following versions
of ssh and mercurial:
ssh version: 1:3.8.1p1-8.sarge.4
mercurial version: 0.8-1 (backport from your version as posted to the
mercurial mailing list)
ssh config files attached. Let me know if there is other information you
need.
I'm sitting in a empty hg repository and pulling from the server. Ie.
[EMAIL PROTECTED] /tmp>mkdir hg
[EMAIL PROTECTED] /tmp>hg init
[EMAIL PROTECTED] /tmp/hg>hg pull ssh://server//tmp/hg
pulling from ssh://server//tmp/hg
requesting all changes
adding changesets
[hangs]
The directory /tmp/hg exists on the server but is not a hg repos. When I
create the hg repos, the command completes successfully.
Faheem.# $OpenBSD: ssh_config,v 1.19 2003/08/13 08:46:31 markus Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for various options
# Host *
# ForwardAgent no
# ForwardX11 no
# ForwardX11Trusted yes
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
# Protocol 2,1
# Cipher 3des
# Ciphers
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
# EscapeChar ~
# Package generated configuration file
# See the sshd(8) manpage for defails
# What ports, IPs and protocols we listen for
Port 22
# Use these options to restrict which interfaces/protocols sshd will bind to
#ListenAddress ::
#ListenAddress 0.0.0.0
Protocol 2
# HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
# Lifetime and size of ephemeral version 1 server key
KeyRegenerationInterval 3600
ServerKeyBits 768
# Logging
SyslogFacility AUTH
LogLevel INFO
# Authentication:
LoginGraceTime 600
#PermitRootLogin yes (Changed by Faheem 19th March 2005).
PermitRootLogin no
StrictModes yes
RSAAuthentication yes
PubkeyAuthentication yes
#AuthorizedKeysFile %h/.ssh/authorized_keys
# rhosts authentication should not be used
#RhostsAuthentication no
# Don't read the user's ~/.rhosts and ~/.shosts files
IgnoreRhosts yes
# For this to work you will also need host keys in /etc/ssh_known_hosts
RhostsRSAAuthentication no
# similar for protocol version 2
HostbasedAuthentication no
# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
#IgnoreUserKnownHosts yes
# To enable empty passwords, change to yes (NOT RECOMMENDED)
PermitEmptyPasswords no
# Uncomment to disable s/key passwords
#ChallengeResponseAuthentication no
# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication yes
# Use PAM authentication via keyboard-interactive so PAM modules can
# properly interface with the user
#PAMAuthenticationViaKbdInt yes
# To change Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#AFSTokenPassing no
#KerberosTicketCleanup no
# Kerberos TGT Passing does only work with the AFS kaserver
#KerberosTgtPassing yes
#X11Forwarding no (changed by Faheem on 5th April 2004)
X11Forwarding yes
X11DisplayOffset 10
PrintMotd no
#PrintLastLog no
KeepAlive yes
#UseLogin no
#MaxStartups 10:30:60
#Banner /etc/issue.net
#ReverseMappingCheck yes
Subsystem sftp /usr/lib/sftp-server
UsePAM yes
# $OpenBSD: ssh_config,v 1.19 2003/08/13 08:46:31 markus Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for various options
# Host *
# ForwardAgent no
# ForwardX11 no
# ForwardX11Trusted yes
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
# Protocol 2,1
# Cipher 3des
# Ciphers
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
# EscapeChar ~
# Package generated configuration file
# See the sshd(8) manpage for details
# What ports, IPs and protocols we listen for
Port 22
# Use these options to restrict which interfaces/protocols sshd will bind to
#ListenAddress ::
#ListenAddress 0.0.0.0
Protocol 2
# HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
#Privilege Separation is turned on for security
UsePrivilegeSeparation yes
# Lifetime and size of ephemeral version 1 server key
KeyRegenerationInterval 3600
ServerKeyBits 768
# Logging
SyslogFacility AUTH
LogLevel INFO
# Authentication:
LoginGraceTime 600
#PermitRootLogin yes (changed by Faheem 19th March 2005)
PermitRootLogin no
StrictModes yes
RSAAuthentication yes
PubkeyAuthentication yes
#AuthorizedKeysFile %h/.ssh/authorized_keys
# Don't read the user's ~/.rhosts and ~/.shosts files
IgnoreRhosts yes
# For this to work you will also need host keys in /etc/ssh_known_hosts
RhostsRSAAuthentication no
# similar for protocol version 2
HostbasedAuthentication no
# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
#IgnoreUserKnownHosts yes
# To enable empty passwords, change to yes (NOT RECOMMENDED)
PermitEmptyPasswords no
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
# Change to yes to enable tunnelled clear text passwords
PasswordAuthentication no
# To change Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#AFSTokenPassing no
#KerberosTicketCleanup no
# Kerberos TGT Passing does only work with the AFS kaserver
#KerberosTgtPassing yes
#X11Forwarding no (changed by Faheem on 5th April 2004)
X11Forwarding yes
X11DisplayOffset 10
PrintMotd no
PrintLastLog yes
KeepAlive yes
#UseLogin no
#MaxStartups 10:30:60
#Banner /etc/issue.net
#ReverseMappingCheck yes
Subsystem sftp /usr/lib/sftp-server
UsePAM yes
