On Sun, Jan 29, 2006 at 12:01:50PM +0100, Georg Colle wrote: > Package: installation-reports > > Boot method: CD > Image version: > 05-11-11 > //cdimage.debian.org/cdimage/daily-builds/etch_d-i/beta1/i386/iso-cd/debian-testing-i386-netinst.iso > Date (yy-mm-dd): 05-12-26 03:07pm > > Machine: Own assembly > Processor: Intel(R) EM64T Pentium(R) 4 CPU 3.20GHz > Memory: 1 GB DDR RAM > Partitions: > Dateisystem Typ 1K-Bl?cke Benutzt Verf?gbar Ben% Eingeh?ngt auf > /dev/sda3 ext3 76896348 10322652 62667492 15% / > tmpfs tmpfs 517056 0 517056 0% /dev/shm > /dev/sda2 ext3 83095060 10438688 68435296 14% /media/sda2 > /dev/sda4 ext3 80234664 9231508 66927468 13% /media/sda4 > tmpfs tmpfs 10240 96 10144 1% /dev > > Output of lspci and lspci -n: > 0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor > to > I/O Controller (rev 04) > 0000:00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL PCI Express > Root Port (rev 04) > 0000:00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) High Definition Audio Controller (rev 03) > 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) > PCI Express Port 1 (rev 03) > 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) > PCI Express Port 2 (rev 03) > 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #1 (rev 03) > 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #2 (rev 03) > 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #3 (rev 03) > 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB UHCI #4 (rev 03) > 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) USB2 EHCI Controller (rev 03) > 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) > 0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC > Interface Bridge (rev 03) > 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 > Family) IDE Controller (rev 03) > 0000:00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA > Controller (rev 03) > 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) > SMBus Controller (rev 03) > 0000:01:04.0 Mass storage controller: Integrated Technology Express, Inc. > IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be IT8212, > embedded seems (rev 13) > 0000:01:0a.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless > Interface > 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E > Gigabit Ethernet Controller (rev 19) > 0000:04:00.0 VGA compatible controller: ATI Technologies Inc R423 UK [Radeon > X800SE (PCIE)] > 0000:04:00.1 Display controller: ATI Technologies Inc Radeon R423 UK (PCIE) > [X800 SE] (Secondary) > > 0000:00:00.0 0600: 8086:2580 (rev 04) > 0000:00:01.0 0604: 8086:2581 (rev 04) > 0000:00:1b.0 0403: 8086:2668 (rev 03) > 0000:00:1c.0 0604: 8086:2660 (rev 03) > 0000:00:1c.1 0604: 8086:2662 (rev 03) > 0000:00:1d.0 0c03: 8086:2658 (rev 03) > 0000:00:1d.1 0c03: 8086:2659 (rev 03) > 0000:00:1d.2 0c03: 8086:265a (rev 03) > 0000:00:1d.3 0c03: 8086:265b (rev 03) > 0000:00:1d.7 0c03: 8086:265c (rev 03) > 0000:00:1e.0 0604: 8086:244e (rev d3) > 0000:00:1f.0 0601: 8086:2640 (rev 03) > 0000:00:1f.1 0101: 8086:266f (rev 03) > 0000:00:1f.2 0101: 8086:2652 (rev 03) > 0000:00:1f.3 0c05: 8086:266a (rev 03) > 0000:01:04.0 0180: 1283:8212 (rev 13) > 0000:01:0a.0 0280: 104c:9066 > 0000:02:00.0 0200: 11ab:4362 (rev 19) > 0000:04:00.0 0300: 1002:554b > 0000:04:00.1 0380: 1002:556b > > Base System Installation Checklist: > [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > > Initial boot worked: [O] > Configure network HW: [E] > Config network: [E] > Detect CD: [O] > Load installer modules: [O] > Detect hard drives: [O] > Partition hard drives: [O] > Create file systems: [O] > Mount partitions: [O] > Install base system: [O] > Install boot loader: [O] > Reboot: [O] > > Comments/Problems: > > The LAN Driver Module sk98lin needed for the Marvell Technology Group Ltd. > 88E8053 PCI-E Gigabit Ethernet Controller (rev 19) in chipset Intel 915G > could not be inserted. > This chipset is wide-spread with Intel P4 machines and there are working > versions of sk98lin delivered with modified debian kernels. See, e. > g., //kanotix.com or //debian.tu-bs.de/project/kanotix/kernel/ . I believe > that it would increase the acceptance of Debian linux very much if they could > provide for working lan drivers for 915G.
The marvell is not (I am pretty sure) part of the 915G. It is a seperate PCI or PCI express chip. Some versions are supported in various kernel versions, others are not yet. Some need a newer sk98lin driver than even 2.6.15 has, some need skge driver. I would expect the 915G to have an intel MAC if it has any networking at all. Given the marvell is on a seperate PCI bus and is pci express in this case, it certainly isn't integrated in the chipset. It is just on the mainboard. And being PCI express means it needs a very new version of the driver to work. Sarge won't run it without a kernel upgrade for sure. Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
