> > Can you tell me which mode (normal/PTP) did you use ? > > How do I find out? I just plug the camera in.
I do not have a camera. But when I plug my
cell phone I have two options (in the cell
phone):
- media device. Like a pendrive I guess.
- camera (PTP))
Is there something similar in your camera ?
> > Can you set '--camera MODEL' and see what happens ? It
> > will necessary to use '--port' too.
> >
> > "--list-cameras" (List supported camera models.) and
>
> This "only" gives:
> helge@samd:~$ gphoto2 --list-cameras | grep G5
> »Canon PowerShot G5 (PTP mode)«
PTP mode is the only way.
> > "--list-ports" (List supported port devices) can be
> > a help.
>
> helge@samd:~$ LC_ALL=C gphoto2 -L --camera "Canon PowerShot G5 (PTP mode)"
> --port "usb:"
>
> *** Error ***
> An error occurred in the io-library ('Bad parameters'): No error description
> available
> *** Error (-2: 'Bad parameters') ***
Yes, PTP must be set on the device, if possible. Did
you try '--auto-detect' ? The manpage says it list
auto-detected cameras.
>
> For debugging messages, please use the --debug option.
> Debugging messages may help finding a solution to your problem.
> If you intend to send any error or debug messages to the gphoto
> developer mailing list <[email protected]>, please run
> gphoto2 as follows:
>
> env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt -L --camera
> "Canon PowerShot G5 (PTP mode)" --port usb:
>
> Please make sure there is sufficient quoting around the arguments.
>
> However, I just by chance tried as root:
> root@samd:~# LC_ALL=C gphoto2 -L
> There is no file in folder '/'.
> There is no file in folder '/store_00010001'.
> There is no file in folder '/store_00010001/MISC'.
> There is no file in folder '/store_80000001'.
>
> Strange, so it must be a permission problem. Also -P works (as root).
Did you check /dev/* ? lsusb and ls -l /dev/bus/usb/003/012 (in my case)
can show the permissions.
regards,
-- Herbert Parentes Fortes Neto (hpfn)
signature.asc
Description: This is a digitally signed message part
