Package: src:linux Version: 4.6.3-1 Severity: normal Dear Maintainer,
I'll start with a solution as it is simple to explain: there is new upstream r8152 driver (v2.06 2016/2/23) which fixes the issue: http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=56&Level=5&Conn=4&DownTypeID=3&GetDown=false Now the issue: I have USB3.0 hub with built-in Realtek 8153 ethernet adapter (served by r8152 driver). When I plug it into USB2.0 socket it works out-of-the-box automatically: ethtool reports "Link detected: yes" and network-manager acquires IP etc.. When I plug it into USB3.0 socket, the device is correctly detected and configured (r8152 is loaded and the adapter appears in usbview etc), but the adapter refuses to sense any network cable, i.e. ethtool reports "Link detected: no", consequently the network does not work (dhclient sends requests but does not get any response). I cannot use the noted USB2.0 socket for long because this socket is primarily used by the charger (it's a laptop without ethernet), so I need it to work with remaining USB3.0 sockets. The solution was to download the new driver (linked above), compile, install and copy 50-usb-realtek-net.rules into /lib/udev/rules.d -- then it works automatically. So it would be nice if this driver version was included into distribution. I also found a related problem: https://bugzilla.redhat.com/show_bug.cgi?id=1236679 but their workaround did not help me (I tried without tlp and with their fix -- the symptoms were the same). Marius -- Package-specific info: ** Version: Linux version 4.6.0-1-amd64 (debian-ker...@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.3-1 (2016-07-04) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64 root=UUID=b6485691-c9ee-4aad-85ba-4d9a8032e2c7 ro quiet ** Tainted: POE (12289) * Proprietary module has been loaded. * Out-of-tree module has been loaded. * Unsigned module has been loaded (currently expected). ** Kernel log: [ 3641.426334] usb 1-5.1: Manufacturer: Realtek [ 3641.426336] usb 1-5.1: SerialNumber: 000001000000 [ 3641.497319] usb 1-5.1: reset high-speed USB device number 22 using xhci_hcd [ 3641.615887] r8152 1-5.1:1.0 eth0: v1.08.3 [ 3641.658110] r8152 1-5.1:1.0 enx00e04c680005: renamed from eth0 [ 3641.691076] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680005: link is not ready [ 3641.737063] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680005: link is not ready [ 3644.326690] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c680005: link becomes ready [ 3712.823926] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 4009.221118] usbcore: deregistering interface driver r8152 [ 4091.423337] usb 1-5.1: reset high-speed USB device number 22 using xhci_hcd [ 4091.598695] r8152 1-5.1:1.0 eth0: v2.06.0 (2016/01/14) [ 4091.598699] r8152 1-5.1:1.0 eth0: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4091.598750] usbcore: registered new interface driver r8152 [ 4091.599333] r8152 1-5.1:1.0 enx00e04c680005: renamed from eth0 [ 4091.623307] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680005: link is not ready [ 4091.649105] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680005: link is not ready [ 4094.461390] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c680005: link becomes ready [ 4159.601904] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.601941] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.601986] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.602025] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.602068] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.602115] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.602161] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.602200] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.602251] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.602290] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4159.603215] usb 1-5: USB disconnect, device number 21 [ 4159.603220] usb 1-5.1: USB disconnect, device number 22 [ 4163.514874] usb 1-5: new high-speed USB device number 34 using xhci_hcd [ 4163.646658] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610 [ 4163.646663] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4163.646666] usb 1-5: Product: USB2.0 Hub [ 4163.646668] usb 1-5: Manufacturer: GenesysLogic [ 4163.647414] hub 1-5:1.0: USB hub found [ 4163.647686] hub 1-5:1.0: 4 ports detected [ 4163.918884] usb 1-5.1: new high-speed USB device number 35 using xhci_hcd [ 4164.008236] usb 1-5.1: New USB device found, idVendor=0bda, idProduct=8153 [ 4164.008243] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 4164.008248] usb 1-5.1: Product: USB 10/100/1000 LAN [ 4164.008251] usb 1-5.1: Manufacturer: Realtek [ 4164.008254] usb 1-5.1: SerialNumber: 000001000000 [ 4164.095157] usb 1-5.1: reset high-speed USB device number 35 using xhci_hcd [ 4164.243840] r8152 1-5.1:1.0 eth0: v2.06.0 (2016/01/14) [ 4164.243846] r8152 1-5.1:1.0 eth0: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4164.451153] usb 1-5.1: reset high-speed USB device number 35 using xhci_hcd [ 4164.618640] r8152 1-5.1:1.0 eth0: v2.06.0 (2016/01/14) [ 4164.618645] r8152 1-5.1:1.0 eth0: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4165.843560] r8152 1-5.1:1.0 enx00e04c680005: renamed from eth0 [ 4165.874673] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680005: link is not ready [ 4165.901139] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680005: link is not ready [ 4167.182768] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c680005: link becomes ready [ 4173.829398] net_ratelimit: 14 callbacks suppressed [ 4173.829407] r8152 1-5.1:1.0 enx00e04c680005: Rx status -71 [ 4173.829500] usb 1-5: USB disconnect, device number 34 [ 4173.829506] usb 1-5.1: USB disconnect, device number 35 [ 4180.822922] usb 1-1: new high-speed USB device number 46 using xhci_hcd [ 4180.956032] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [ 4180.956037] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4180.956040] usb 1-1: Product: USB2.0 Hub [ 4180.956042] usb 1-1: Manufacturer: GenesysLogic [ 4180.956916] hub 1-1:1.0: USB hub found [ 4180.957417] hub 1-1:1.0: 4 ports detected [ 4181.062886] usb 2-1: new SuperSpeed USB device number 4 using xhci_hcd [ 4181.083246] usb 2-1: New USB device found, idVendor=05e3, idProduct=0612 [ 4181.083251] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4181.083254] usb 2-1: Product: USB3.0 Hub [ 4181.083256] usb 2-1: Manufacturer: GenesysLogic [ 4181.085321] hub 2-1:1.0: USB hub found [ 4181.085591] hub 2-1:1.0: 4 ports detected [ 4181.238802] usb 1-1.1: new high-speed USB device number 47 using xhci_hcd [ 4181.422774] usb 2-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 4181.439450] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=8153 [ 4181.439455] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 4181.439458] usb 2-1.1: Product: USB 10/100/1000 LAN [ 4181.439460] usb 2-1.1: Manufacturer: Realtek [ 4181.439461] usb 2-1.1: SerialNumber: 000001000000 [ 4181.519463] usb 2-1.1: reset SuperSpeed USB device number 5 using xhci_hcd [ 4181.595615] r8152 2-1.1:1.0 eth0: v2.06.0 (2016/01/14) [ 4181.595623] r8152 2-1.1:1.0 eth0: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4181.719052] usb 2-1.1: reset SuperSpeed USB device number 5 using xhci_hcd [ 4181.818700] r8152 2-1.1:1.0 eth0: v2.06.0 (2016/01/14) [ 4181.818703] r8152 2-1.1:1.0 eth0: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4181.850862] r8152 2-1.1:1.0 enx00e04c680005: renamed from eth0 [ 4181.876230] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680005: link is not ready [ 4181.900565] IPv6: ADDRCONF(NETDEV_UP): enx00e04c680005: link is not ready [ 4184.414600] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04c680005: link becomes ready [ 4284.979449] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A [ 4543.832400] [drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A ** Model information sys_vendor: LENOVO product_name: 80HE product_version: Lenovo YOGA 3 Pro-1370 chassis_vendor: LENOVO chassis_version: Lenovo YOGA 3 Pro-1370 bios_vendor: LENOVO bios_version: A6CN58WW board_vendor: LENOVO board_name: VIUU4 board_version: 31900056 WIN ** Loaded modules: r8152(OE) sr_mod(E) cdrom(E) uas(E) usb_storage(E) fuse(E) rfcomm(E) bnep(E) binfmt_misc(E) nls_utf8(E) nls_cp437(E) vfat(E) fat(E) hid_sensor_rotation(E) hid_sensor_als(E) hid_sensor_accel_3d(E) hid_sensor_incl_3d(E) hid_sensor_gyro_3d(E) hid_sensor_magn_3d(E) hid_sensor_trigger(E) hid_sensor_iio_common(E) industrialio_triggered_buffer(E) kfifo_buf(E) industrialio(E) hid_sensor_hub(E) uvcvideo(E) videobuf2_vmalloc(E) videobuf2_memops(E) videobuf2_v4l2(E) videobuf2_core(E) videodev(E) media(E) btusb(E) btrtl(E) btbcm(E) btintel(E) cdc_ether(E) usbnet(E) bluetooth(E) mii(E) usbhid(E) joydev(E) iTCO_wdt(E) iTCO_vendor_support(E) thinkpad_acpi(E) nvram(E) msr(E) hid_rmi(E) hid_multitouch(E) snd_hda_codec_hdmi(E) intel_rapl(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) efi_pstore(E) ghash_clmulni_intel(E) pcspkr(E) wl(POE) evdev(E) serio_raw(E) efivars(E) sg(E) snd_hda_intel(E) snd_hda_codec(E) lpc_ich(E) i2c_i801(E) mei_me(E) i915(E) mfd_core(E) mei(E) shpchp(E) snd_hda_core(E) intel_pch_thermal(E) snd_hwdep(E) snd_pcm(E) processor_thermal_device(E) intel_soc_dts_iosf(E) drm_kms_helper(E) snd_timer(E) snd(E) soundcore(E) drm(E) wmi(E) i2c_algo_bit(E) battery(E) snd_soc_sst_acpi(E) int3403_thermal(E) snd_soc_sst_match(E) video(E) dw_dmac(E) dw_dmac_core(E) int3402_thermal(E) int340x_thermal_zone(E) i2c_designware_platform(E) i2c_designware_core(E) int3400_thermal(E) acpi_pad(E) acpi_thermal_rel(E) ac(E) tpm_tis(E) button(E) tpm(E) processor(E) iwlwifi(E) cfg80211(E) rfkill(E) broadcom(E) bcm_phy_lib(E) libphy(E) ecryptfs(E) cbc(E) hmac(E) encrypted_keys(E) parport_pc(E) ppdev(E) lp(E) parport(E) efivarfs(E) autofs4(E) ext4(E) ecb(E) crc16(E) jbd2(E) crc32c_generic(E) mbcache(E) sd_mod(E) crc32c_intel(E) aesni_intel(E) aes_x86_64(E) glue_helper(E) lrw(E) gf128mul(E) ablk_helper(E) cryptd(E) ahci(E) libahci(E) libata(E) scsi_mod(E) xhci_pci(E) xhci_hcd(E) usbcore(E) usb_common(E) thermal(E) fan(E) i2c_hid(E) hid(E) sdhci_acpi(E) sdhci(E) mmc_core(E) fjes(E) ** Network interface configuration: source /etc/network/interfaces.d/* auto lo iface lo inet loopback ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state DORMANT group default qlen 1000 link/ether 38:b1:db:e3:e9:e7 brd ff:ff:ff:ff:ff:ff 10: enx00e04c680005: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 00:e0:4c:68:00:05 brd ff:ff:ff:ff:ff:ff inet 192.168.1.192/24 brd 192.168.1.255 scope global dynamic enx00e04c680005 valid_lft 85216sec preferred_lft 85216sec inet6 fe80::4507:aae4:58b0:b8c0/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 857283 11030 0 0 0 0 0 0 857283 11030 0 0 0 0 0 0 wlan0: 5626 24 0 0 0 4909 0 0 35946 193 0 0 0 0 0 0 enx00e04c680005: 4701803 3969 0 0 0 0 0 0 622823 2723 0 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 2 18312 total packets received 11 with invalid addresses 0 forwarded 0 incoming packets discarded 18298 incoming packets delivered 18034 requests sent out 1116 outgoing packets dropped 675 dropped because of missing route Icmp: 5507 ICMP messages received 4 input ICMP message failed. ICMP input histogram: destination unreachable: 5506 echo requests: 1 5508 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 5507 echo replies: 1 IcmpMsg: InType3: 5506 InType8: 1 OutType0: 1 OutType3: 5507 Tcp: 176 active connections openings 0 passive connection openings 10 failed connection attempts 20 connection resets received 11 connections established 3874 segments received 4346 segments send out 15 segments retransmited 0 bad segments received. 26 resets sent Udp: 3468 packets received 5499 packets to unknown port received. 0 packet receive errors 8442 packets sent 0 receive buffer errors 0 send buffer errors IgnoredMulti: 3 UdpLite: TcpExt: 42 TCP sockets finished time wait in fast timer 113 delayed acks sent Quick ack mode was activated 4 times 2068 packet headers predicted 675 acknowledgments not containing data payload received 172 predicted acknowledgments 1 congestion windows recovered without slow start after partial ack TCPTimeouts: 7 TCPLossProbes: 2 TCPDSACKOldSent: 6 3 connections reset due to unexpected data 3 connections reset due to early user close 5 connections aborted due to timeout 2 times unable to send RST due to no memory TCPRcvCoalesce: 701 TCPOFOQueue: 70 TCPSpuriousRtxHostQueues: 5 TCPAutoCorking: 1 TCPSynRetrans: 4 TCPOrigDataSent: 1068 TCPKeepAlive: 255 IpExt: InMcastPkts: 140 OutMcastPkts: 157 InBcastPkts: 255 OutBcastPkts: 201 InOctets: 8368011 OutOctets: 2267666 InMcastOctets: 15298 OutMcastOctets: 15978 InBcastOctets: 60117 OutBcastOctets: 47319 InNoECTPkts: 20430 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Broadwell-U Host Bridge -OPI [8086:1604] (rev 08) Subsystem: Lenovo Broadwell-U Host Bridge -OPI [17aa:3906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: bdw_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation Broadwell-U Integrated Graphics [8086:161e] (rev 08) (prog-if 00 [VGA controller]) Subsystem: Lenovo HD Graphics 5300 [17aa:3906] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 46 Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 3000 [size=64] [virtual] Expansion ROM at 000c0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:03.0 Audio device [0403]: Intel Corporation Broadwell-U Audio Controller [8086:160c] (rev 08) Subsystem: Lenovo Broadwell-U Audio Controller [17aa:3906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 48 Region 0: Memory at c1318000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:04.0 Signal processing controller [1180]: Intel Corporation Broadwell-U Camarillo Device [8086:1603] (rev 08) Subsystem: Lenovo Broadwell-U Processor Thermal Subsystem [17aa:3906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at c1310000 (64-bit, non-prefetchable) [size=32K] Capabilities: <access denied> Kernel driver in use: proc_thermal Kernel modules: processor_thermal_device 00:14.0 USB controller [0c03]: Intel Corporation Wildcat Point-LP USB xHCI Controller [8086:9cb1] (rev 03) (prog-if 30 [XHCI]) Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller [17aa:3906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at c1300000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:16.0 Communication controller [0780]: Intel Corporation Wildcat Point-LP MEI Controller #1 [8086:9cba] (rev 03) Subsystem: Lenovo Wildcat Point-LP MEI Controller [17aa:3906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at c1321000 (64-bit, non-prefetchable) [size=32] Capabilities: <access denied> Kernel driver in use: mei_me Kernel modules: mei_me 00:1b.0 Audio device [0403]: Intel Corporation Wildcat Point-LP High Definition Audio Controller [8086:9ca0] (rev 03) Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller [17aa:3906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at c131c000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 [8086:9c94] (rev e3) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 42 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: c1000000-c12fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport Kernel modules: shpchp 00:1f.0 ISA bridge [0601]: Intel Corporation Wildcat Point-LP LPC Controller [8086:9cc7] (rev 03) Subsystem: Lenovo Wildcat Point-LP LPC Controller [17aa:3906] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich Kernel modules: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] [8086:9c83] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode] [17aa:3906] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 44 Region 0: I/O ports at 3088 [size=8] Region 1: I/O ports at 3094 [size=4] Region 2: I/O ports at 3080 [size=8] Region 3: I/O ports at 3090 [size=4] Region 4: I/O ports at 3060 [size=32] Region 5: Memory at c1324000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus [0c05]: Intel Corporation Wildcat Point-LP SMBus Controller [8086:9ca2] (rev 03) Subsystem: Lenovo Wildcat Point-LP SMBus Controller [17aa:3906] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at c1320000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 3040 [size=32] Kernel modules: i2c_i801 00:1f.6 Signal processing controller [1180]: Intel Corporation Wildcat Point-LP Thermal Management Controller [8086:9ca4] (rev 03) Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller [17aa:3906] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at c1323000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel_pch_thermal Kernel modules: intel_pch_thermal 01:00.0 Network controller [0280]: Broadcom Corporation BCM4352 802.11ac Wireless Network Adapter [14e4:43b1] (rev 03) Subsystem: Lenovo BCM4352 802.11ac Wireless Network Adapter [17aa:0623] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at c1200000 (64-bit, non-prefetchable) [size=32K] Region 2: Memory at c1000000 (64-bit, non-prefetchable) [size=2M] Capabilities: <access denied> Kernel driver in use: wl Kernel modules: bcma, wl ** USB devices: Bus 002 Device 005: ID 0bda:8153 Realtek Semiconductor Corp. Bus 002 Device 004: ID 05e3:0612 Genesys Logic, Inc. Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 006: ID 048d:8386 Integrated Technology Express, Inc. Bus 001 Device 004: ID 5986:0535 Acer, Inc Bus 001 Device 002: ID 0489:e07a Foxconn / Hon Hai Bus 001 Device 046: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (900, 'testing'), (500, 'stable'), (50, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.6.0-1-amd64 depends on: ii initramfs-tools [linux-initramfs-tool] 0.125 ii kmod 22-1.1 ii linux-base 4.4 Versions of packages linux-image-4.6.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2 Versions of packages linux-image-4.6.0-1-amd64 suggests: ii debian-kernel-handbook 1.0.17 ii grub-efi 2.02~beta2-36 ii linux-doc-4.6 4.6.3-1 Versions of packages linux-image-4.6.0-1-amd64 is related to: ii firmware-amd-graphics 20160110-1 pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> ii firmware-brcm80211 20160110-1 pn firmware-cavium <none> pn firmware-intel-sound <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux-nonfree 20160110-1 ii firmware-misc-nonfree 20160110-1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-realtek <none> pn firmware-samsung <none> pn firmware-siano <none> pn firmware-ti-connectivity <none> pn xen-hypervisor <none> -- no debconf information
