Package: libexodusii-dev
Version: 6.02.dfsg.1-6.1build1
Severity: important
Tags: patch
Dear Maintainer,
The include file for Fortran is missing in libexodusii-dev. The file is
supposed to be named "exodusII.inc" and have the following content
! -*- mode: fortran -*-
!
! Copyright 1994 Sandia Corporation. Under the terms of Contract
! DE-AC04-94AL85000 with Sandia Corporation, the U.S. Government
! retains certain rights in this software.
!
! See the COPYRIGHT file for copying and redistribution conditions.
!
!***************************************************************
!
! Name: exodusII.inc - Exodus II Application include file
!
! Use this include file to define general Exodus II parameters
!
!*****************************************************************************
!
! Define Exodus functions that return values
!
integer excre,exopen,exlgmd, exinqi
external excre, exopen, exlgmd, exinqi
!
! Define access modes
!
integer EXNOCL,EXCLOB,EXREAD,EXWRIT,EXWRT,EXNORM,EXLARG
integer EXNET4, EXNOSH, EXSHAR
integer EX_READ,EX_WRITE,EX_NOCLOBBER,EX_CLOBBER,EX_NORMAL_MODEL
integer EX_LARGE_MODEL,EX_NETCDF4,EX_NOSHARE,EX_SHARE
integer EX_NOCLASSIC,EX_MAPS_INT64_DB,EX_IDS_INT64_DB
integer EX_BULK_INT64_DB,EX_ALL_INT64_DB
integer EX_MAPS_INT64_API
integer EX_IDS_INT64_API,EX_BULK_INT64_API,EX_ALL_INT64_API
parameter (EXWRIT = 1) ! EXWRIT - File open for write
parameter (EXWRT = 1) ! EXWRT - File open for write
(alternate to EXWRIT)
parameter (EXREAD = 2) ! EXREAD - File open for read
parameter (EXNOCL = 4) ! EXNOCL - File create with no
overwrite (no clobber), default
parameter (EXCLOB = 8) ! EXCLOB - File create with
overwrite (clobber)
parameter (EXNORM = 16) ! EXNORM - Disable large model
modifications
parameter (EXLARG = 32) ! EXLARG - Large model modifications
parameter (EXNET4 = 64) ! EXNET4 - use the hdf5-based
netcdf4 output
parameter (EXNOSH = 128) ! EXNOSH - Do not open netcdf file
in "share" mode
parameter (EXSHAR = 256) ! EXSHAR - Do open netcdf file in
"share" mode
! Some of these are repeated from above, but use the same name as the C/C++
versions...
parameter (EX_READ = 0) !ex_open(): open file for reading
(default)
parameter (EX_WRITE = 1) ! ex_open(): open existing file
for appending.
parameter (EX_NOCLOBBER = 4) ! Don't overwrite existing
database, default
parameter (EX_CLOBBER = 8) ! Overwrite existing database if
it exists
parameter (EX_NORMAL_MODEL = 16) ! disable mods that permit
storage of larger models
parameter (EX_LARGE_MODEL = 32) ! enable mods that permit storage
of larger models
parameter (EX_NETCDF4 = 64) ! use the hdf5-based netcdf4
output
parameter (EX_NOSHARE = 128) ! Do not open netcdf file in
"share" mode
parameter (EX_SHARE = 256) ! Do open netcdf file in "share"
mode
parameter (EX_NOCLASSIC = 512) ! Do not force netcdf to classic
mode in netcdf4 mode
! Need to distinguish between storage on database (DB in name) and
! passed through the API functions (API in name).
parameter (EX_MAPS_INT64_DB = 1024) ! All maps (id, order, ...) store
int64_t values
parameter (EX_IDS_INT64_DB = 2048) ! All entity ids (sets, blocks,
maps) are int64_t values
parameter (EX_BULK_INT64_DB = 4096) ! All integer bulk data (local
indices, counts, maps); not ids
parameter (EX_ALL_INT64_DB = 1024+2048+4096) ! All of the above...
parameter (EX_MAPS_INT64_API= 8192) ! All maps (id, order, ...) store
int64_t values
parameter (EX_IDS_INT64_API = 16384) ! All entity ids (sets, blocks,
maps) are int64_t values
parameter (EX_BULK_INT64_API= 32768) ! All integer bulk data (local
indices, counts, maps); not ids
parameter (EX_ALL_INT64_API = 8192+16384+32768) ! All of the above...
!
! --INQUIRE FLAGS
integer EXTYPE, EXVERS, EXDBVR, EXTITL, EXDIM, EXNODE
integer EXELEM, EXELBL, EXNODS, EXSIDS, EXQA, EXINFO
integer EXTIMS, EXSSNL, EXSSEL, EXNSNL, EXNEBP, EXNNSP
integer EXNSSP, EXNSDF, EXSSDF, EXLBVR, EXNEMP, EXNNMP
integer EXNEM, EXNNM, EXNEDG, EXNEDB, EXNEDS, EXESL
integer EXESDL, EXEDBP, EXEDSP, EXNFAC, EXNFB , EXNFS
integer EXFSL , EXFSDL, EXFABP, EXFASP, EXNELS, EXELSL
integer EXELSD, EXELSP, EXNEDM, EXNFAM, EXNCF, EXDBMXALNM
integer EXDBMXUSNM, EXMXRDNM
!
parameter (EXTYPE = 1) ! -- inquire EXODUS II file type
parameter (EXVERS = 2) ! -- inquire API version number
parameter (EXDBVR = 3) ! -- inquire database version number
parameter (EXTITL = 4) ! -- inquire database title
parameter (EXDIM = 5) ! -- inquire number of dimensions
parameter (EXNODE = 6) ! -- inquire number of nodes
parameter (EXELEM = 7) ! -- inquire number of elements
parameter (EXELBL = 8) ! -- inquire number of element blocks
parameter (EXNODS = 9) ! -- inquire number of node sets
parameter (EXNSNL = 10) ! -- inquire length of node set node list
parameter (EXSIDS = 11) ! -- inquire number of side sets
parameter (EXSSNL = 12) ! -- inquire length of side set node list
parameter (EXSSEL = 13) ! -- inquire length of side set element list
parameter (EXQA = 14) ! -- inquire number of QA records
parameter (EXINFO = 15) ! -- inquire number of info records
parameter (EXTIMS = 16) ! -- inquire number of time steps in the
database
parameter (EXNEBP = 17) ! -- inquire number of element block
properties
parameter (EXNNSP = 18) ! -- inquire number of node set properties
parameter (EXNSSP = 19) ! -- inquire number of side set properties
parameter (EXNSDF = 20) ! -- inquire length of node set distribution
factor list
parameter (EXSSDF = 21) ! -- inquire length of side set distribution
factor list
parameter (EXLBVR = 22) ! -- inquire API Lib vers number
parameter (EXNEMP = 23) ! -- inquire number of element map properties
parameter (EXNNMP = 24) ! -- inquire number of node map properties
parameter (EXNEM = 25) ! -- inquire number of element maps
parameter (EXNNM = 26) ! -- inquire number of node maps
parameter (EXNEDG = 27) ! -- inquire number of edges
parameter (EXNEDB = 28) ! -- inquire number of edge blocks
parameter (EXNEDS = 29) ! -- inquire number of edge sets
parameter (EXESL = 30) ! -- inquire length of concat edge set edge
list
parameter (EXESDL = 31) ! -- inquire length of concat edge set dist
factor list
parameter (EXEDBP = 32) ! -- inquire number of properties stored per
edge block
parameter (EXEDSP = 33) ! -- inquire number of properties stored per
edge set
Parameter (EXNFAC = 34) ! -- inquire number of faces
parameter (EXNFB = 35) ! -- inquire number of face blocks
parameter (EXNFS = 36) ! -- inquire number of face sets
parameter (EXFSL = 37) ! -- inquire length of concat face set face
list
parameter (EXFSDL = 38) ! -- inquire length of concat face set dist
factor list
parameter (EXFABP = 39) ! -- inquire number of properties stored per
face block
parameter (EXFASP = 40) ! -- inquire number of properties stored per
face set
parameter (EXNELS = 41) ! -- inquire number of element sets
parameter (EXELSL = 42) ! -- inquire length of concat element set
element list
parameter (EXELSD = 43) ! -- inquire length of concat element set
dist factor list
parameter (EXELSP = 44) ! -- inquire number of properties stored per
elem set
parameter (EXNEDM = 45) ! -- inquire number of edge maps
parameter (EXNFAM = 46) ! -- inquire number of face maps
parameter (EXNCF = 47) ! -- inquire number of coordinate frames
parameter (EXDBMXALNM = 48)! -- inquire size of MAX_NAME_LENGTH
dimension on database
parameter (EXDBMXUSNM = 49)! -- inquire max size of any name existing on
database
parameter (EXMXRDNM = 50) ! -- inquire user-specified max size of names
returned; truncated if longer
!
! Define limits
!
integer MXSTLN, MXLNLN, MXNAME
! MXSTLN - Maximum string length: used for store strings
parameter (MXSTLN = 32)
! MXLNLN - Maximum line string length
parameter (MXLNLN = 80)
! MXNAME - Maximum possible length of a name (due to netcdf NC_MAX_NAME)
parameter (MXNAME = 256)
!
! properties
!
integer EXEBLK, EXNSET, EXSSET, EXEMAP, EXNMAP
parameter (EXEBLK = 1) ! EXEBLK - element block property code
parameter (EXNSET = 2) ! EXNSPR - node set property code
parameter (EXSSET = 3) ! EXSSPR - side set property code
parameter (EXEMAP = 4) ! EXEMAP - element map property code
parameter (EXNMAP = 5) ! EXNMAP - node map property code
!
! Define options codes
!
integer EXVRBS, EXDEBG, EXABRT
parameter (EXVRBS = 1) ! EXVRBS - verbose mode message flag
parameter (EXDEBG = 2) ! EXDEBG - debug mode message flag
parameter (EXABRT = 4) ! EXABRT - abort mode flag
!
! Define coordinate frames
!
integer EXCFREC, EXCFCYL, EXCFSPH
parameter (EXCFREC = 1) ! Rectangular
parameter (EXCFCYL = 2) ! Cylindrical
parameter (EXCFSPH = 3) ! Spherical
!
! Define error return codes
!
integer EXFATL, EXOK, EXWARN
parameter (EXFATL = -1) ! EXFATL - fatal error flag def
parameter (EXOK = 0) ! EXOK - no err (success) flag def
parameter (EXWARN = 1) ! EXWARN - warning flag def
!
! Define error return codes and flags
!
integer EXMEMF, EXBFMD, EXBFID, EXBTID, EXBPRM, EXNULL
integer EXPMSG, EXLMSG
parameter (EXMEMF = 1000) ! EXMEMF - memory allocation failure flag def
parameter (EXBFMD = 1001) ! EXBFMD - wrong file mode
parameter (EXBFID = 1002) ! EXBFID - bad file id def
parameter (EXBTID = 1004) ! EXBTID - id table lookup failed
parameter (EXBPRM = 1005) ! EXBPRM - bad parameter passed
parameter (EXNULL = -1006) ! EXNULL - null entity found
parameter (EXPMSG = -1000) ! EXPMSG - message print code - no error
implied
parameter (EXLMSG = -1001) ! EXLMSG - print last error message msg code
I got this file by manually compiling ExodusII.
The definitions in the file above make it much easier to call the functions in
libexoIIv2for.a -- which is already in the libexodusii-dev package.
Best regards
Christian Felter
-- System Information:
Debian Release: stretch/sid
APT prefers xenial-updates
APT policy: (500, 'xenial-updates'), (500, 'xenial-security'), (500,
'xenial'), (100, 'xenial-backports')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.4.0-22-generic (SMP w/48 CPU cores)
Locale: LANG=da_DK.UTF-8, LC_CTYPE=da_DK.UTF-8 (charmap=locale: Cannot set
LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages libexodusii-dev depends on:
ii libexodusii5 6.02.dfsg.1-6.1build1
ii libnemesis3 6.02.dfsg.1-6.1build1
ii libnetcdf-dev 1:4.4.0-2
libexodusii-dev recommends no packages.
libexodusii-dev suggests no packages.
-- debconf information:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_US:en",
LC_ALL = (unset),
LANG = "da_DK.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
