Package: openocd
Version: 0.8.0-4
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
Attempted connection between Olimex ARM-USB-OCD / LPC-microcontroller
and 'jessie' host
for programming/debugging.
* What exactly did you do (or not do) that was effective (or
ineffective)?
Attempted to edit interface script
/usr/share/openocd/scripts/interface/olimex-arm-usb-ocd.cfg,
which was ineffective.
Tried using 'wheezy' system, which uses an older version of openocd.
This worked, showing
that the failure is a consequence of a change in openocd that
no longer supports
the ft2232 interface. (That system cannot be substituted for
whole job, but
demonstrates that the problem is with the newer software rather
than the hardware).
Also tried updating to stretch versions of openocd (and supporting
libraries). This
did not change the script, so (unsurprisingly) failed to fix
the problem.
* What was the outcome of this action?
Various error messages, logs, etc., all indicating that the connection
between the linux host
and the target embedded system was not established.
* What outcome did you expect instead?
A proper connection as occurred with a wheezy system.
PLEASE update the scripts so that they will work with the ftdi
protocol. THANKS!
*** End of the template - remove these template lines ***
-- System Information:
Debian Release: 8.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.7-ckt11 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages openocd depends on:
ii libc6 2.19-18+deb8u1
ii libftdi1 0.20-3
ii libhidapi-hidraw0 0.8.0~rc1+git20140201.3a66d4e+dfsg-3
ii libusb-0.1-4 2:0.1.12-25
ii libusb-1.0-0 2:1.0.19-1
openocd recommends no packages.
openocd suggests no packages.
-- no debconf information
