Package: watchdog
Version: 5.14-3
Severity: normal
Dear Maintainer,
I was unsing watchdog sucessfully on a machine on which the disk controller
ocasionaly hangs.
After upgrading to debian 8.1 the machine keept freezing again and was not
reset.
I checked my runlevel => 5
I did a fresly update-rc.d for watchdog and runlevel 5
root@quasar:~# ls -l /etc/rc5.d/S16watchdog
lrwxrwxrwx 1 root root 18 Jul 1 16:58 /etc/rc5.d/S16watchdog ->
../init.d/watchdog
Looks right.
But still:
root@quasar:~# /etc/init.d/watchdog start
[ ok ] Starting watchdog (via systemctl): watchdog.service.
root@quasar:~# /etc/init.d/watchdog stop
[ ok ] Stopping watchdog (via systemctl): watchdog.service.
root@quasar:~# /etc/rc5.d/S16watchdog start
[....] Starting S16watchdog (via systemctl): S16watchdog.serviceFailed to start
S16watchdog.service: Unit S16watchdog.service failed to load: No such file or
directory.
failed!
root@quasar:~# /etc/init.d/watchdog status
* watchdog.service - watchdog daemon
Loaded: loaded (/lib/systemd/system/watchdog.service; static)
Active: active (running) since Sam 2015-08-08 09:59:54 CEST; 5s ago
Process: 3796 ExecStopPost=/bin/sh -c [ $run_wd_keepalive != 1 ] || false
(code=exited, status=1/FAILURE)
Process: 3875 ExecStart=/bin/sh -c [ $run_watchdog != 1 ] || exec
/usr/sbin/watchdog $watchdog_options (code=exited, status=0/SUCCESS)
Process: 3872 ExecStartPre=/bin/sh -c [ -z "${watchdog_module}" ] || [
"${watchdog_module}" = "none" ] || /sbin/modprobe $watchdog_module
(code=exited, status=0/SUCCESS)
Main PID: 3877 (watchdog)
CGroup: /system.slice/watchdog.service
`-3877 /usr/sbin/watchdog -s
Aug 08 09:59:54 quasar.woody.ch watchdog[3877]: int=30s realtime=yes sync=yes
soft=no mla=0 mem=0
Aug 08 09:59:54 quasar.woody.ch watchdog[3877]: ping: no machine to check
Aug 08 09:59:54 quasar.woody.ch watchdog[3877]: file: no file to check
Aug 08 09:59:54 quasar.woody.ch watchdog[3877]: pidfile: no server process to
check
Aug 08 09:59:54 quasar.woody.ch watchdog[3877]: interface: no interface to check
Aug 08 09:59:54 quasar.woody.ch watchdog[3877]: temperature: no sensors to check
Aug 08 09:59:54 quasar.woody.ch watchdog[3877]: test=none(0) repair=none(0)
alive=/dev/watchdog heartbeat=none to=root no_act=no force=no
Aug 08 09:59:54 quasar.woody.ch watchdog[3877]: watchdog now set to 60 seconds
Aug 08 09:59:54 quasar.woody.ch watchdog[3877]: hardware watchdog identity:
Software Watchdog
Aug 08 09:59:54 quasar.woody.ch systemd[1]: Started watchdog daemon.
root@quasar:~# /etc/rc5.d/S16watchdog status
* S16watchdog.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
It is the same script, just the location where it is started is different.
I did try to debug the init script and find some relative paths or similar,
there are none.
I suppose the problem is hidden in the LSB Lib that is loaded.
-Benoit-
-- System Information:
Debian Release: 8.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'oldstable-updates'), (500,
'stable'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_CH, LC_CTYPE=de_CH (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages watchdog depends on:
ii debconf [debconf-2.0] 1.5.56
ii init-system-helpers 1.22
ii libc6 2.19-18
ii lsb-base 4.1+Debian13+nmu1
ii udev 215-17+deb8u1
watchdog recommends no packages.
watchdog suggests no packages.
-- Configuration Files:
/etc/watchdog.conf changed:
watchdog-device = /dev/watchdog
realtime = yes
priority = 1
interval = 30
-- debconf information:
watchdog/run_keepalive: true
watchdog/restart: false
watchdog/module: none
watchdog/run: true
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
