Package: xserver-xorg-input-evdev
Version: 1:2.9.0-2
Severity: serious

Hi,

I upgraded the system from stable to testing and could not get a working
system. A few minutes (2-3) after boot the system seems to be tired and
goes into suspend mode.
Clicking the power button the system wakes up to start sleeping again after
approximately 2 minutes, and so on ...

Not funny ...

I removed the pm-suspend and other pm-* tools (by linking to /bin/true) but
this did not help. There was also no hint why the system is gooing to sleep
in the system logs (dmesg, /var/log/messages, /var/log/syslog).

After some time I remembered the acpi=off kernel option but with this I do
not even get a working X session. The problem is that the system is
unable to load i915.ko as is depends on some acpi_* symbols. The
framebuffer is not activated at boot (no vga= option) and fails as well as
the vesa mode :-(
[This justifies at least one other bug report, what to you think?]

Booting the kernel with "acpi=off vga=0x31b" I get a working X session
without suspend. But now I cannot power off the system ...

Why do I think it is evdevs fault? My non-working Xorg log (Xorg.0.log.old,
without kernel options) contains

[    41.427] (II) config/udev: Adding input device Power Button
(/dev/input/event4)
[    41.429] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    41.501] (II) Using input driver 'evdev' for 'Power Button'
[    41.501] (**) evdev: Power Button: Device: "/dev/input/event4"
[    41.502] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[    41.670] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[    41.671] (**) evdev: Power Button: Device: "/dev/input/event2"
[    41.671] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 8)
[    41.685] (II) config/udev: Adding input device Sleep Button
(/dev/input/event3)
[    41.686] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    41.686] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    41.686] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 9)
[   100.212] (II) evdev: Sleep Button: Close
[   100.212] (II) evdev: Power Button: Close
[   100.212] (II) evdev: Power Button: Close

So there are two power buttons and a sleep button? Is this possible or is
the keyboard interpreted as power button? I assume the latter. Please
reassign this bug if necessary.

My current X log is also attached (Xorg.0.log, with kernel option).

dmesg:
[   15.738284] udevd[383]: starting version 175
[   16.511124] ACPI: Requesting acpi_cpufreq
[   16.517493] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[   16.517573] ACPI: Lid Switch [LID0]
[   16.517724] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   16.517737] ACPI: Power Button [PWRB]
[   16.517881] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[   16.517891] ACPI: Sleep Button [SLPB]
[   16.527455] Marking TSC unstable due to TSC halts in idle
[   16.527489] ACPI: acpi_idle registered with cpuidle
[   16.527910] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   16.527923] ACPI: Power Button [PWRF]

syslog:

Jan 18 20:22:00 SilverBeauty kernel: [  857.581995] i915: Unknown
symbol acpi_video_verify_backlight_support (err 0)
Jan 18 20:22:00 SilverBeauty kernel: [  857.583357] i915: Unknown
symbol acpi_lid_notifier_register (err 0)
Jan 18 20:22:00 SilverBeauty kernel: [  857.584988] i915: Unknown
symbol acpi_video_unregister (err 0)
Jan 18 20:22:00 SilverBeauty kernel: [  857.585811] i915: Unknown
symbol acpi_lid_notifier_unregister (err 0)
Jan 18 20:22:00 SilverBeauty kernel: [  857.586148] i915: Unknown
symbol acpi_lid_open (err 0)
Jan 18 20:22:00 SilverBeauty kernel: [  857.586514] i915: Unknown
symbol acpi_video_register (err 0)

-- Package-specific info:
X server symlink status:
------------------------
lrwxrwxrwx 1 root root 13 Apr  5  2014 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 2569072 Dec  9 23:13 /usr/bin/Xorg

VGA-compatible devices on PCI bus:
----------------------------------
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03)

/etc/X11/xorg.conf does not exist.

/etc/X11/xorg.conf.d does not exist.

KMS configuration files:
------------------------
/etc/modprobe.d/radeon-kms.conf:
  options radeon modeset=1

Kernel version (/proc/version):
-------------------------------
Linux version 3.16.0-4-586 (debian-ker...@lists.debian.org) (gcc
version 4.8.3 (Debian 4.8.3-16) ) #1 Debian 3.16.7-ckt2-1 (2014-12-08)

Xorg X server log files on system:
----------------------------------
-rw-r--r-- 1 root root 28405 Nov 16 17:26 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 14543 Jan 23 23:21 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file (/var/log/Xorg.0.log):
---------------------------------------------------------------------
[removed, see attachments]

udev information:
-----------------
P: 
/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:15D9:0A4F.0001/input/input10
E: 
DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:15D9:0A4F.0001/input/input10
E: EV=17
E: ID_BUS=usb
E: ID_FOR_SEAT=input-pci-0000_00_1d_1-usb-0_1_1_0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_OPTICAL_MOUSE
E: ID_MODEL_ENC=\x20USB\x20OPTICAL\x20MOUSE
E: ID_MODEL_ID=0a4f
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=15d9_USB_OPTICAL_MOUSE
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=15d9
E: ID_VENDOR_ENC=15d9
E: ID_VENDOR_ID=15d9
E: KEY=70000 0 0 0 0 0 0 0 0
E: MODALIAS=input:b0003v15D9p0A4Fe0111-e0,1,2,4,k110,111,112,r0,1,8,am4,lsfw
E: MSC=10
E: NAME=" USB OPTICAL MOUSE"
E: PHYS="usb-0000:00:1d.1-1/input0"
E: PRODUCT=3/15d9/a4f/111
E: PROP=0
E: REL=103
E: SUBSYSTEM=input
E: TAGS=:seat:
E: UNIQ=""
E: USEC_INITIALIZED=794520

P: 
/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:15D9:0A4F.0001/input/input10/event3
N: input/event3
S: input/by-id/usb-15d9_USB_OPTICAL_MOUSE-event-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse
E: DEVLINKS=/dev/input/by-id/usb-15d9_USB_OPTICAL_MOUSE-event-mouse
/dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-event-mouse
E: DEVNAME=/dev/input/event3
E: 
DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:15D9:0A4F.0001/input/input10/event3
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_OPTICAL_MOUSE
E: ID_MODEL_ENC=\x20USB\x20OPTICAL\x20MOUSE
E: ID_MODEL_ID=0a4f
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=15d9_USB_OPTICAL_MOUSE
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=15d9
E: ID_VENDOR_ENC=15d9
E: ID_VENDOR_ID=15d9
E: MAJOR=13
E: MINOR=67
E: SUBSYSTEM=input
E: USEC_INITIALIZED=794861

P: 
/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:15D9:0A4F.0001/input/input10/mouse1
N: input/mouse1
S: input/by-id/usb-15d9_USB_OPTICAL_MOUSE-mouse
S: input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse
E: DEVLINKS=/dev/input/by-id/usb-15d9_USB_OPTICAL_MOUSE-mouse
/dev/input/by-path/pci-0000:00:1d.1-usb-0:1:1.0-mouse
E: DEVNAME=/dev/input/mouse1
E: 
DEVPATH=/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:15D9:0A4F.0001/input/input10/mouse1
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_MODEL=USB_OPTICAL_MOUSE
E: ID_MODEL_ENC=\x20USB\x20OPTICAL\x20MOUSE
E: ID_MODEL_ID=0a4f
E: ID_PATH=pci-0000:00:1d.1-usb-0:1:1.0
E: ID_PATH_TAG=pci-0000_00_1d_1-usb-0_1_1_0
E: ID_REVISION=0100
E: ID_SERIAL=15d9_USB_OPTICAL_MOUSE
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=15d9
E: ID_VENDOR_ENC=15d9
E: ID_VENDOR_ID=15d9
E: MAJOR=13
E: MINOR=33
E: SUBSYSTEM=input
E: USEC_INITIALIZED=794777

P: /devices/platform/i8042/serio0/input/input0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0
E: EV=120013
E: ID_FOR_SEAT=input-platform-i8042-serio-0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEY=500f 2000403 3803078 f870d001 feffffdf e3efffff ffffffff fffffffe
E: LED=7
E: 
MODALIAS=input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,94,95,96,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,C0,C1,CA,D9,E0,E1,E2,E3,EC,EE,ram4,l0,1,2,sfw
E: MSC=10
E: NAME="AT Translated Set 2 keyboard"
E: PHYS="isa0060/serio0/input0"
E: PRODUCT=11/1/1/ab41
E: PROP=0
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=7951

P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: input/by-path/platform-i8042-serio-0-event-kbd
E: BACKSPACE=guess
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DEVNAME=/dev/input/event0
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_PATH=platform-i8042-serio-0
E: ID_PATH_TAG=platform-i8042-serio-0
E: ID_SERIAL=noserial
E: KEYBOARD_KEY_74=prog1
E: KEYBOARD_KEY_75=www
E: KEYBOARD_KEY_77=f22
E: KEYBOARD_KEY_78=mail
E: KEYBOARD_KEY_79=f23
E: KEYBOARD_KEY_82=!switchvideomode
E: KEYBOARD_KEY_83=!battery
E: KEYBOARD_KEY_84=!prog1
E: KEYBOARD_KEY_86=!wlan
E: KEYBOARD_KEY_88=!brightnessup
E: KEYBOARD_KEY_89=!brightnessdown
E: KEYBOARD_KEY_b1=!prog2
E: KEYBOARD_KEY_b3=!prog3
E: KEYBOARD_KEY_b4=!wlan
E: KEYBOARD_KEY_c5=!prog3
E: KEYBOARD_KEY_d5=!wlan
E: KEYBOARD_KEY_f7=!f22
E: KEYBOARD_KEY_f9=!f23
E: MAJOR=13
E: MINOR=64
E: SUBSYSTEM=input
E: USEC_INITIALIZED=41922
E: XKBLAYOUT=de
E: XKBMODEL=a4techKB21

P: /devices/platform/i8042/serio4/input/input9
E: ABS=11000003
E: DEVPATH=/devices/platform/i8042/serio4/input/input9
E: EV=b
E: ID_FOR_SEAT=input-platform-i8042-serio-4
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: ID_SERIAL=noserial
E: KEY=6420 0 30000 0 0 0 0 0 0 0 0
E: 
MODALIAS=input:b0011v0002p0007e25B1-e0,1,3,k110,111,145,14A,14D,14E,ra0,1,18,1C,mlsfw
E: NAME="SynPS/2 Synaptics TouchPad"
E: PHYS="isa0060/serio4/input0"
E: PRODUCT=11/2/7/25b1
E: PROP=1
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=864850

P: /devices/platform/i8042/serio4/input/input9/event2
N: input/event2
S: input/by-path/platform-i8042-serio-4-event-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-event-mouse
E: DEVNAME=/dev/input/event2
E: DEVPATH=/devices/platform/i8042/serio4/input/input9/event2
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=66
E: SUBSYSTEM=input
E: USEC_INITIALIZED=866627

P: /devices/platform/i8042/serio4/input/input9/mouse0
N: input/mouse0
S: input/by-path/platform-i8042-serio-4-mouse
E: DEVLINKS=/dev/input/by-path/platform-i8042-serio-4-mouse
E: DEVNAME=/dev/input/mouse0
E: DEVPATH=/devices/platform/i8042/serio4/input/input9/mouse0
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_PATH=platform-i8042-serio-4
E: ID_PATH_TAG=platform-i8042-serio-4
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=32
E: SUBSYSTEM=input
E: USEC_INITIALIZED=865950

P: /devices/platform/pcspkr/input/input7
E: DEVPATH=/devices/platform/pcspkr/input/input7
E: EV=40001
E: ID_FOR_SEAT=input-platform-pcspkr
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MODALIAS=input:b0010v001Fp0001e0100-e0,12,kramls1,2,fw
E: NAME="PC Speaker"
E: PHYS="isa0061/input0"
E: PRODUCT=10/1f/1/100
E: PROP=0
E: SND=6
E: SUBSYSTEM=input
E: TAGS=:seat:
E: USEC_INITIALIZED=132704

P: /devices/platform/pcspkr/input/input7/event1
N: input/event1
S: input/by-path/platform-pcspkr-event-spkr
E: DEVLINKS=/dev/input/by-path/platform-pcspkr-event-spkr
E: DEVNAME=/dev/input/event1
E: DEVPATH=/devices/platform/pcspkr/input/input7/event1
E: ID_INPUT=1
E: ID_PATH=platform-pcspkr
E: ID_PATH_TAG=platform-pcspkr
E: ID_SERIAL=noserial
E: MAJOR=13
E: MINOR=65
E: SUBSYSTEM=input
E: USEC_INITIALIZED=136304


DRM Information from dmesg:
---------------------------
[    0.746807] Linux agpgart interface v0.103
[    0.746924] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[    0.746942] agpgart-intel 0000:00:00.0: detected gtt size: 262144K
total, 262144K mappable
[    0.747778] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.747916] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   21.478232] [drm] Initialized drm 1.1.0 20060810


-- System Information:
Debian Release: 8.0
  APT prefers testing-updates
  APT policy: (500, 'testing-updates'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 3.16.0-4-586
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages xserver-xorg-input-evdev depends on:
ii  libc6                                  2.19-13
ii  libevdev2                              1.3+dfsg-1
ii  libmtdev1                              1.1.5-1
ii  libudev1                               215-8
ii  xserver-xorg-core [xorg-input-abi-21]  2:1.16.2.901-1

xserver-xorg-input-evdev recommends no packages.

xserver-xorg-input-evdev suggests no packages.

-- no debconf information

Attachment: xinput.list.--long
Description: Binary data

[    39.116] 
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[    39.116] X Protocol Version 11, Revision 0
[    39.116] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[    39.116] Current Operating System: Linux SilverBeauty 3.16.0-4-586 #1 Debian 3.16.7-ckt2-1 (2014-12-08) i686
[    39.116] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-586 root=UUID=c9f0e4f5-ed11-47f9-b4d1-4df6cd57d749 ro quiet acpi=off vga=0x31b
[    39.117] Build Date: 09 December 2014  10:10:21PM
[    39.117] xorg-server 2:1.16.2.901-1 (http://www.debian.org/support) 
[    39.117] Current version of pixman: 0.32.6
[    39.117] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    39.117] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    39.117] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 23 23:21:03 2015
[    39.145] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    39.166] (==) No Layout section.  Using the first Screen section.
[    39.166] (==) No screen section available. Using defaults.
[    39.166] (**) |-->Screen "Default Screen Section" (0)
[    39.166] (**) |   |-->Monitor "<default monitor>"
[    39.166] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    39.166] (==) Automatically adding devices
[    39.166] (==) Automatically enabling devices
[    39.166] (==) Automatically adding GPU devices
[    39.166] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    39.166] 	Entry deleted from font path.
[    39.166] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[    39.166] (==) ModulePath set to "/usr/lib/xorg/modules"
[    39.166] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    39.166] (II) Loader magic: 0xb7713700
[    39.166] (II) Module ABI versions:
[    39.166] 	X.Org ANSI C Emulation: 0.4
[    39.166] 	X.Org Video Driver: 18.0
[    39.166] 	X.Org XInput driver : 21.0
[    39.166] 	X.Org Server Extension : 8.0
[    39.168] (--) PCI:*(0:0:2:0) 8086:2592:144d:c01a rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0000000/262144, I/O @ 0x00001800/8
[    39.168] (--) PCI: (0:0:2:1) 8086:2792:144d:c01a rev 3, Mem @ 0x80000000/524288
[    39.168] (II) LoadModule: "glx"
[    39.168] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    39.300] (II) Module glx: vendor="X.Org Foundation"
[    39.301] 	compiled for 1.16.2.901, module version = 1.0.0
[    39.301] 	ABI class: X.Org Server Extension, version 8.0
[    39.301] (==) AIGLX enabled
[    39.301] (==) Matched intel as autoconfigured driver 0
[    39.301] (==) Matched modesetting as autoconfigured driver 1
[    39.301] (==) Matched fbdev as autoconfigured driver 2
[    39.301] (==) Matched vesa as autoconfigured driver 3
[    39.301] (==) Assigned the driver to the xf86ConfigLayout
[    39.301] (II) LoadModule: "intel"
[    39.302] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    39.302] (II) Module intel: vendor="X.Org Foundation"
[    39.302] 	compiled for 1.15.99.904, module version = 2.21.15
[    39.302] 	Module class: X.Org Video Driver
[    39.302] 	ABI class: X.Org Video Driver, version 18.0
[    39.302] (II) LoadModule: "modesetting"
[    39.302] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    39.339] (II) Module modesetting: vendor="X.Org Foundation"
[    39.339] 	compiled for 1.15.99.904, module version = 0.9.0
[    39.339] 	Module class: X.Org Video Driver
[    39.339] 	ABI class: X.Org Video Driver, version 18.0
[    39.339] (II) LoadModule: "fbdev"
[    39.340] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    39.340] (II) Module fbdev: vendor="X.Org Foundation"
[    39.340] 	compiled for 1.15.99.904, module version = 0.4.4
[    39.340] 	Module class: X.Org Video Driver
[    39.340] 	ABI class: X.Org Video Driver, version 18.0
[    39.340] (II) LoadModule: "vesa"
[    39.341] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    39.341] (II) Module vesa: vendor="X.Org Foundation"
[    39.341] 	compiled for 1.15.99.904, module version = 2.3.3
[    39.341] 	Module class: X.Org Video Driver
[    39.341] 	ABI class: X.Org Video Driver, version 18.0
[    39.341] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
	HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
	HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
	HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
	HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    39.341] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    39.341] (II) FBDEV: driver for framebuffer: fbdev
[    39.341] (II) VESA: driver for VESA chipsets: vesa
[    39.341] (++) using VT number 7

[    39.398] (EE) open /dev/dri/card0: No such file or directory
[    39.398] (WW) Falling back to old probe method for modesetting
[    39.398] (EE) open /dev/dri/card0: No such file or directory
[    39.398] (II) Loading sub module "fbdevhw"
[    39.398] (II) LoadModule: "fbdevhw"
[    39.398] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    39.398] (II) Module fbdevhw: vendor="X.Org Foundation"
[    39.398] 	compiled for 1.16.2.901, module version = 0.0.2
[    39.398] 	ABI class: X.Org Video Driver, version 18.0
[    39.398] (**) FBDEV(1): claimed PCI slot 0@0:2:0
[    39.399] (II) FBDEV(1): using default device
[    39.399] (WW) Falling back to old probe method for vesa
[    39.399] (EE) Screen 0 deleted because of no matching config section.
[    39.399] (II) UnloadModule: "modesetting"
[    39.399] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    39.399] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[    39.399] (==) FBDEV(0): RGB weight 888
[    39.399] (==) FBDEV(0): Default visual is TrueColor
[    39.399] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[    39.399] (II) FBDEV(0): hardware: simple (video memory: 5120kB)
[    39.399] (II) FBDEV(0): checking modes against framebuffer device...
[    39.399] (II) FBDEV(0): checking modes against monitor...
[    39.399] (--) FBDEV(0): Virtual size is 1280x1024 (pitch 1280)
[    39.399] (**) FBDEV(0):  Built-in mode "current"
[    39.399] (==) FBDEV(0): DPI set to (96, 96)
[    39.399] (II) Loading sub module "fb"
[    39.399] (II) LoadModule: "fb"
[    39.399] (II) Loading /usr/lib/xorg/modules/libfb.so
[    39.399] (II) Module fb: vendor="X.Org Foundation"
[    39.399] 	compiled for 1.16.2.901, module version = 1.0.0
[    39.399] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    39.399] (**) FBDEV(0): using shadow framebuffer
[    39.399] (II) Loading sub module "shadow"
[    39.399] (II) LoadModule: "shadow"
[    39.399] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    39.492] (II) Module shadow: vendor="X.Org Foundation"
[    39.492] 	compiled for 1.16.2.901, module version = 1.1.0
[    39.492] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    39.492] (II) UnloadModule: "vesa"
[    39.492] (II) Unloading vesa
[    39.492] (==) Depth 24 pixmap format is 32 bpp
[    39.492] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    39.493] (==) FBDEV(0): Backing store enabled
[    39.493] (==) FBDEV(0): DPMS enabled
[    39.493] (==) RandR enabled
[    39.511] (II) SELinux: Disabled on system
[    39.514] (II) AIGLX: Screen 0 is not DRI2 capable
[    39.514] (EE) AIGLX: reverting to software rendering
[    42.554] (II) AIGLX: Loaded and initialized swrast
[    42.555] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    42.699] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/event3)
[    42.699] (**)  USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[    42.699] (II) LoadModule: "evdev"
[    42.699] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    43.098] (II) Module evdev: vendor="X.Org Foundation"
[    43.098] 	compiled for 1.16.0, module version = 2.9.0
[    43.098] 	Module class: X.Org XInput Driver
[    43.098] 	ABI class: X.Org XInput driver, version 21.0
[    43.098] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[    43.098] (**)  USB OPTICAL MOUSE: always reports core events
[    43.098] (**) evdev:  USB OPTICAL MOUSE: Device: "/dev/input/event3"
[    43.098] (--) evdev:  USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4f
[    43.098] (--) evdev:  USB OPTICAL MOUSE: Found 3 mouse buttons
[    43.098] (--) evdev:  USB OPTICAL MOUSE: Found scroll wheel(s)
[    43.098] (--) evdev:  USB OPTICAL MOUSE: Found relative axes
[    43.098] (--) evdev:  USB OPTICAL MOUSE: Found x and y relative axes
[    43.098] (II) evdev:  USB OPTICAL MOUSE: Configuring as mouse
[    43.098] (II) evdev:  USB OPTICAL MOUSE: Adding scrollwheel support
[    43.098] (**) evdev:  USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[    43.098] (**) evdev:  USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    43.098] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/0003:15D9:0A4F.0001/input/input10/event3"
[    43.098] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 6)
[    43.098] (II) evdev:  USB OPTICAL MOUSE: initialized for relative axes.
[    43.099] (**)  USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[    43.099] (**)  USB OPTICAL MOUSE: (accel) acceleration profile 0
[    43.099] (**)  USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[    43.099] (**)  USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[    43.099] (II) config/udev: Adding input device  USB OPTICAL MOUSE (/dev/input/mouse1)
[    43.099] (II) No input driver specified, ignoring this device.
[    43.099] (II) This device may have been added with another device file.
[    43.100] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    43.100] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    43.100] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    43.100] (**) AT Translated Set 2 keyboard: always reports core events
[    43.100] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    43.100] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    43.100] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    43.100] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    43.100] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    43.100] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 7)
[    43.100] (**) Option "xkb_rules" "evdev"
[    43.100] (**) Option "xkb_model" "a4techKB21"
[    43.100] (**) Option "xkb_layout" "de"
[    43.131] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event2)
[    43.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    43.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    43.131] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    43.131] (II) LoadModule: "synaptics"
[    43.131] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    43.132] (II) Module synaptics: vendor="X.Org Foundation"
[    43.132] 	compiled for 1.16.0.901, module version = 1.8.99
[    43.132] 	Module class: X.Org XInput Driver
[    43.132] 	ABI class: X.Org XInput driver, version 21.0
[    43.132] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    43.132] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    43.132] (**) Option "Device" "/dev/input/event2"
[    43.132] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 67)
[    43.132] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 136)
[    43.132] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    43.132] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    43.132] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    43.132] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    43.132] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    43.132] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    43.132] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input9/event2"
[    43.132] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 8)
[    43.132] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    43.132] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    43.132] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[    43.132] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    43.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    43.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    43.133] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    43.133] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    43.133] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    43.133] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    43.133] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[    43.133] (II) No input driver specified, ignoring this device.
[    43.133] (II) This device may have been added with another device file.
[    43.138] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    72.472] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[    72.473] (EE) FBDEV(0): FBIOBLANK: Invalid argument

Attachment: Xorg.0.log.old
Description: application/trash

Reply via email to