*Hello Sir* *Kindly update; the virtualbox runs the sound through the pulse audio. But the rest is the same.*
*Thank you and oblige.* *Kind Regards,* *(Khurram Mahmood)* On 4 January 2015 at 08:57, Khurram Mahmood <makh...@gmail.com> wrote: > Package: src:linux > Version: 3.16.7-ckt2-1 > Severity: normal > > Dear Maintainer, > > *** Reporter, please consider answering these questions, where appropriate > *** > > * What led up to the situation? > Fresh Install. > > * What exactly did you do (or not do) that was effective (or > ineffective)? > I installed pulse audio, but some apps still have no audio like > quodlibet, virtualbox and chroot environment, etc. But vlc and > some other apps have working sound after installation of > pulse audio. > > * What was the outcome of this action? > * What outcome did you expect instead? > > *** End of the template - remove these template lines *** > > > -- Package-specific info: > ** Version: > Linux version 3.16.0-4-amd64 (debian-ker...@lists.debian.org) (gcc > version 4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08) > > ** Command line: > BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 > root=UUID=b635f48f-40fe-4a54-8fac-f5953137b67e ro quiet > > ** Tainted: O (4096) > * Out-of-tree module has been loaded. > > ** Kernel log: > [ 10.337315] input: HDA Intel PCH Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 > [ 10.394325] tpm_tis 00:05: TPM is disabled/deactivated (0x7) > [ 10.444129] cfg80211: Calling CRDA to update world regulatory domain > [ 10.560045] input: PC Speaker as /devices/platform/pcspkr/input/input12 > [ 10.566786] ACPI: Battery Slot [BAT0] (battery present) > [ 10.566882] input: Sleep Button as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input13 > [ 10.566887] ACPI: Sleep Button [SLPB] > [ 10.566936] input: Lid Switch as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input14 > [ 10.566965] ACPI: Lid Switch [LID] > [ 10.567011] input: Power Button as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15 > [ 10.567014] ACPI: Power Button [PWRF] > [ 10.642488] iTCO_vendor_support: vendor-support=0 > [ 10.865802] [drm] Memory usable by graphics device = 2048M > [ 10.865805] [drm] Replacing VGA console driver > [ 10.867013] Console: switching to colour dummy device 80x25 > [ 10.867534] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, > using 1500 ms instead > [ 10.974318] AVX2 version of gcm_enc/dec engaged. > [ 10.976002] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) > [ 11.040611] alg: No test for crc32 (crc32-pclmul) > [ 11.040837] input: HP WMI hotkeys as /devices/virtual/input/input16 > [ 11.046143] i915 0000:00:02.0: irq 66 for MSI/MSI-X > [ 11.046153] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). > [ 11.046154] [drm] Driver supports precise vblank timestamp query. > [ 11.120261] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 > [ 11.120298] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, > TCOBASE=0x1860) > [ 11.120425] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 11.174158] vgaarb: device changed decodes: > PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem > [ 11.194926] [drm] VBT doesn't support DRRS > [ 11.227245] fbcon: inteldrmfb (fb0) is primary device > [ 11.351582] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: > 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2653, fw id: 1481159 > [ 11.387503] input: SynPS/2 Synaptics TouchPad as > /devices/platform/i8042/serio3/input/input11 > [ 11.784652] Using firmware rtlwifi/rtl8723befw.bin > [ 11.789205] media: Linux media interface: v0.10 > [ 11.797912] input: ST LIS3LV02DL Accelerometer as > /devices/platform/lis3lv02d/input/input18 > [ 11.811584] Linux video capture interface: v2.00 > [ 11.955652] rtl8723be 0000:09:00.0: firmware: failed to load > rtlwifi/rtl8723befw.bin (-2) > [ 11.955653] rtl8723be 0000:09:00.0: Direct firmware load failed with > error -2 > [ 11.955654] rtl8723be 0000:09:00.0: Falling back to user helper > [ 11.985365] uvcvideo: Found UVC 1.00 device HP HD Webcam (04f2:b3c8) > [ 11.986510] input: HP HD Webcam as > /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input19 > [ 11.986562] usbcore: registered new interface driver uvcvideo > [ 11.986562] USB Video Class driver (1.1.1) > [ 12.176277] Firmware rtlwifi/rtl8723befw.bin not available > [ 12.176653] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' > [ 12.176929] rtlwifi: wireless switch is on > [ 12.281698] Console: switching to colour frame buffer device 170x48 > [ 12.286424] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device > [ 12.286426] i915 0000:00:02.0: registered panic notifier > [ 12.357333] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: > no) > [ 12.357450] input: Video Bus as > /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20 > [ 12.357536] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on > minor 0 > [ 12.365629] snd_hda_intel 0000:00:03.0: irq 67 for MSI/MSI-X > [ 12.447885] Bluetooth: Core ver 2.19 > [ 12.447900] NET: Registered protocol family 31 > [ 12.447902] Bluetooth: HCI device and connection manager initialized > [ 12.447910] Bluetooth: HCI socket layer initialized > [ 12.447913] Bluetooth: L2CAP socket layer initialized > [ 12.447922] Bluetooth: SCO socket layer initialized > [ 12.612703] input: HDA Intel HDMI HDMI/DP,pcm=3 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input21 > [ 12.612816] input: HDA Intel HDMI HDMI/DP,pcm=7 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input22 > [ 12.613988] input: HDA Intel HDMI HDMI/DP,pcm=8 as > /devices/pci0000:00/0000:00:03.0/sound/card0/input23 > [ 12.825589] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off > [ 12.853322] usbcore: registered new interface driver btusb > [ 13.618239] Adding 1843196k swap on /dev/sda6. Priority:-1 extents:1 > across:1843196k FS > [ 13.719492] Turbo disabled by BIOS or unavailable on processor > [ 14.349908] EXT4-fs (sda7): re-mounted. Opts: > errors=remount-ro,data=ordered,commit=600 > [ 14.828053] r8169 0000:08:00.0 eth0: rtl_ocp_gphy_cond == 1 (loop: 10, > delay: 25). > [ 14.828607] r8169 0000:08:00.0 eth0: rtl_ocp_gphy_cond == 1 (loop: 10, > delay: 25). > [ 14.829165] r8169 0000:08:00.0 eth0: rtl_ocp_gphy_cond == 1 (loop: 10, > delay: 25). > [ 14.840028] EXT4-fs (sda8): mounted filesystem with ordered data mode. > Opts: user_xattr,data=ordered > [ 14.849295] systemd-journald[163]: Received request to flush runtime > journal from PID 1 > [ 16.178273] RPC: Registered named UNIX socket transport module. > [ 16.178281] RPC: Registered udp transport module. > [ 16.178285] RPC: Registered tcp transport module. > [ 16.178289] RPC: Registered tcp NFSv4.1 backchannel transport module. > [ 16.200519] FS-Cache: Loaded > [ 16.240070] FS-Cache: Netfs 'nfs' registered for caching > [ 16.305817] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). > [ 17.461637] vboxdrv: Found 4 processor cores. > [ 17.462113] vboxdrv: fAsync=0 offMin=0x1ec offMax=0x23f6 > [ 17.462305] vboxdrv: TSC mode is 'synchronous', kernel timer mode is > 'normal'. > [ 17.462310] vboxdrv: Successfully loaded version 4.3.18_Debian > (interface 0x001a0008). > [ 17.908547] vboxpci: IOMMU not found (not registered) > [ 21.886588] r8169 0000:08:00.0: firmware: failed to load > rtl_nic/rtl8168g-3.fw (-2) > [ 21.886665] r8169 0000:08:00.0: Direct firmware load failed with error > -2 > [ 21.886668] r8169 0000:08:00.0: Falling back to user helper > [ 21.887868] r8169 0000:08:00.0 eth0: unable to load firmware patch > rtl_nic/rtl8168g-3.fw (-12) > [ 21.896255] r8169 0000:08:00.0 eth0: link down > [ 21.896315] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 23.458573] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 27.112477] wlan0: authenticate with c8:3a:35:1d:96:b1 > [ 27.122579] wlan0: send auth to c8:3a:35:1d:96:b1 (try 1/3) > [ 27.124168] wlan0: authenticated > [ 27.128364] wlan0: associate with c8:3a:35:1d:96:b1 (try 1/3) > [ 27.131943] wlan0: RX AssocResp from c8:3a:35:1d:96:b1 (capab=0x411 > status=0 aid=1) > [ 27.140072] wlan0: associated > [ 27.140089] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > [ 422.339783] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has > bogus alignment > [ 422.341982] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has > bogus alignment > [ 3300.998996] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has > bogus alignment > > ** Model information > sys_vendor: Hewlett-Packard > product_name: HP ProBook 440 G2 > product_version: A3008CD10003 > chassis_vendor: Hewlett-Packard > chassis_version: > bios_vendor: Hewlett-Packard > bios_version: M74 Ver. 01.03 > board_vendor: Hewlett-Packard > board_name: 2247 > board_version: KBC Version 67.22 > > ** Loaded modules: > ctr > ccm > pci_stub > vboxpci(O) > vboxnetadp(O) > vboxnetflt(O) > vboxdrv(O) > nfsd > auth_rpcgss > oid_registry > nfs_acl > nfs > lockd > fscache > sunrpc > ecb > btusb > snd_hda_codec_hdmi > bluetooth > x86_pkg_temp_thermal > arc4 > uvcvideo > videobuf2_vmalloc > videobuf2_memops > videobuf2_core > v4l2_common > intel_powerclamp > videodev > media > 6lowpan_iphc > rtl8723be(O) > btcoexist(O) > rtl_pci(O) > rtlwifi(O) > intel_rapl > joydev > coretemp > kvm_intel > kvm > iTCO_wdt > crc32_pclmul > ghash_clmulni_intel > mac80211 > aesni_intel > aes_x86_64 > lrw > gf128mul > i915 > glue_helper > hp_wmi > ablk_helper > cryptd > sparse_keymap > iTCO_vendor_support > evdev > pcspkr > psmouse > tpm_infineon > serio_raw > cfg80211 > drm_kms_helper > snd_hda_codec_realtek > snd_hda_codec_generic > rfkill > drm > rtsx_pci_ms > memstick > snd_hda_intel > snd_hda_controller > snd_hda_codec > tpm_tis > tpm > battery > button > wmi > snd_hwdep > snd_pcm > snd_timer > snd > video > mei_me > mei > soundcore > intel_smartconnect > hp_wireless > hp_accel > lis3lv02d > lpc_ich > i2c_algo_bit > ac > i2c_core > shpchp > processor > input_polldev > fuse > parport_pc > ppdev > lp > parport > autofs4 > ext4 > crc16 > mbcache > jbd2 > sg > sr_mod > sd_mod > cdrom > crc_t10dif > crct10dif_generic > rtsx_pci_sdmmc > mmc_core > crct10dif_pclmul > crct10dif_common > crc32c_intel > ahci > libahci > libata > scsi_mod > ehci_pci > ehci_hcd > r8169 > rtsx_pci > mii > mfd_core > xhci_hcd > usbcore > usb_common > thermal > thermal_sys > > ** Network interface configuration: > > auto lo > iface lo inet loopback > > ** Network status: > *** IP interfaces and addresses: > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group > default > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > valid_lft forever preferred_lft forever > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast > state DOWN group default qlen 1000 > link/ether 14:58:d0:c0:02:10 brd ff:ff:ff:ff:ff:ff > 3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > group default qlen 1000 > link/ether 38:b1:db:af:a2:69 brd ff:ff:ff:ff:ff:ff > inet 192.168.1.2/24 brd 192.168.1.255 scope global dynamic wlan0 > valid_lft 81309sec preferred_lft 81309sec > inet6 fe80::3ab1:dbff:feaf:a269/64 scope link > valid_lft forever preferred_lft forever > > *** Device statistics: > Inter-| Receive | > Transmit > face |bytes packets errs drop fifo frame compressed multicast|bytes > packets errs drop fifo colls carrier compressed > eth0: 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 > wlan0: 623845390 416721 0 0 0 0 0 0 > 32943044 355203 0 0 0 0 0 0 > lo: 114971555 87488 0 0 0 0 0 0 > 114971555 87488 0 0 0 0 0 0 > > *** Protocol statistics: > Ip: > 422089 total packets received > 2 with invalid addresses > 0 forwarded > 0 incoming packets discarded > 421975 incoming packets delivered > 361078 requests sent out > Icmp: > 8 ICMP messages received > 0 input ICMP message failed. > ICMP input histogram: > destination unreachable: 8 > 8 ICMP messages sent > 0 ICMP messages failed > ICMP output histogram: > destination unreachable: 8 > IcmpMsg: > InType3: 8 > OutType3: 8 > Tcp: > 846 active connections openings > 645 passive connection openings > 6 failed connection attempts > 33 connection resets received > 17 connections established > 502960 segments received > 442021 segments send out > 80 segments retransmited > 49 bad segments received. > 116 resets sent > Udp: > 315 packets received > 8 packets to unknown port received. > 0 packet receive errors > 226 packets sent > UdpLite: > TcpExt: > 703 TCP sockets finished time wait in fast timer > 16012 delayed acks sent > 1 delayed acks further delayed because of locked socket > Quick ack mode was activated 777 times > 371 packets directly queued to recvmsg prequeue. > 6750 bytes directly in process context from backlog > 5383 bytes directly received in process context from prequeue > 247347 packet headers predicted > 4 packets header predicted and directly queued to user > 2119 acknowledgments not containing data payload received > 28035 predicted acknowledgments > 21 congestion windows recovered without slow start after partial ack > 26 other TCP timeouts > TCPLossProbes: 44 > TCPLossProbeRecovery: 19 > 776 DSACKs sent for old packets > 182 DSACKs sent for out of order packets > 37 DSACKs received > 17 connections reset due to unexpected data > 28 connections reset due to early user close > 2 connections aborted due to timeout > TCPDSACKIgnoredNoUndo: 28 > TCPSackShiftFallback: 2 > TCPRcvCoalesce: 102848 > TCPOFOQueue: 130092 > TCPOFOMerge: 182 > TCPChallengeACK: 59 > TCPSYNChallenge: 49 > TCPAutoCorking: 61 > TCPSynRetrans: 20 > TCPOrigDataSent: 57346 > IpExt: > InMcastPkts: 96 > OutMcastPkts: 65 > InBcastPkts: 77 > OutBcastPkts: 63 > InOctets: 618349833 > OutOctets: 21206622 > InMcastOctets: 10427 > OutMcastOctets: 5246 > InBcastOctets: 12358 > OutBcastOctets: 10334 > InNoECTPkts: 422089 > > > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller > [8086:0a04] (rev 0b) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort+ <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: <access denied> > > 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT > Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA > controller]) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 66 > Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M] > Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] > Region 4: I/O ports at 7000 [size=64] > Expansion ROM at <unassigned> [disabled] > Capabilities: <access denied> > Kernel driver in use: i915 > > 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio > Controller [8086:0a0c] (rev 0b) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 67 > Region 0: Memory at c0810000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: snd_hda_intel > > 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC > [8086:9c31] (rev 04) (prog-if 30 [XHCI]) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 60 > Region 0: Memory at c0800000 (64-bit, non-prefetchable) [size=64K] > Capabilities: <access denied> > Kernel driver in use: xhci_hcd > > 00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI > #0 [8086:9c3a] (rev 04) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 64 > Region 0: Memory at c0819000 (64-bit, non-prefetchable) [size=32] > Capabilities: <access denied> > Kernel driver in use: mei_me > > 00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio > Controller [8086:9c20] (rev 04) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 65 > Region 0: Memory at c0814000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: snd_hda_intel > > 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root > Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=01, subordinate=06, sec-latency=0 > Memory behind bridge: c0700000-c07fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root > Port 2 [8086:9c12] (rev e4) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 > I/O behind bridge: 00005000-00006fff > Memory behind bridge: c0600000-c06fffff > Prefetchable memory behind bridge: > 00000000afb00000-00000000afcfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root > Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 > I/O behind bridge: 00004000-00004fff > Memory behind bridge: c0500000-c05fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root > Port 4 [8086:9c16] (rev e4) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: c0400000-c04fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort+ <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: <access denied> > Kernel driver in use: pcieport > > 00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1 > [8086:9c26] (rev 04) (prog-if 20 [EHCI]) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 17 > Region 0: Memory at c081d000 (32-bit, non-prefetchable) [size=1K] > Capabilities: <access denied> > Kernel driver in use: ehci-pci > > 00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller > [8086:9c43] (rev 04) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: <access denied> > Kernel driver in use: lpc_ich > > 00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller > 1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0]) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 63 > Region 0: I/O ports at 7088 [size=8] > Region 1: I/O ports at 7094 [size=4] > Region 2: I/O ports at 7080 [size=8] > Region 3: I/O ports at 7090 [size=4] > Region 4: I/O ports at 7060 [size=32] > Region 5: Memory at c081c000 (32-bit, non-prefetchable) [size=2K] > Capabilities: <access denied> > Kernel driver in use: ahci > > 00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series > Thermal [8086:9c24] (rev 04) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 10 > Region 0: Memory at c081b000 (64-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > > 07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 > PCI Express Card Reader [10ec:5227] (rev 01) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Physical Slot: 1 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 61 > Region 0: Memory at c0600000 (32-bit, non-prefetchable) [size=4K] > Capabilities: <access denied> > Kernel driver in use: rtsx_pci > > 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev > 10) > Subsystem: Hewlett-Packard Company Device [103c:2247] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 62 > Region 0: I/O ports at 4000 [size=256] > Region 2: Memory at c0504000 (64-bit, non-prefetchable) [size=4K] > Region 4: Memory at c0500000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: r8169 > > 09:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. > RTL8723BE PCIe Wireless Network Adapter [10ec:b723] > Subsystem: Hewlett-Packard Company Device [103c:2231] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 19 > Region 0: I/O ports at 3000 [size=256] > Region 2: Memory at c0400000 (64-bit, non-prefetchable) [size=16K] > Capabilities: <access denied> > Kernel driver in use: rtl8723be > > > ** USB devices: > Bus 003 Device 002: ID 8087:8000 Intel Corp. > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub > Bus 001 Device 003: ID 04f2:b3c8 Chicony Electronics Co., Ltd > Bus 001 Device 002: ID 0bda:b001 Realtek Semiconductor Corp. > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > > -- System Information: > Debian Release: 8.0 > APT prefers testing > APT policy: (500, 'testing') > Architecture: amd64 (x86_64) > > Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) > Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > Init: systemd (via /run/systemd/system) > > Versions of packages linux-image-3.16.0-4-amd64 depends on: > ii debconf [debconf-2.0] 1.5.55 > ii initramfs-tools [linux-initramfs-tool] 0.116 > ii kmod 18-3 > ii linux-base 3.5 > ii module-init-tools 18-3 > > Versions of packages linux-image-3.16.0-4-amd64 recommends: > pn firmware-linux-free <none> > pn irqbalance <none> > > Versions of packages linux-image-3.16.0-4-amd64 suggests: > pn debian-kernel-handbook <none> > ii grub-pc 2.02~beta2-19 > pn linux-doc-3.16 <none> > > Versions of packages linux-image-3.16.0-4-amd64 is related to: > pn firmware-atheros <none> > pn firmware-bnx2 <none> > pn firmware-bnx2x <none> > pn firmware-brcm80211 <none> > pn firmware-intelwimax <none> > pn firmware-ipw2x00 <none> > pn firmware-ivtv <none> > pn firmware-iwlwifi <none> > pn firmware-libertas <none> > pn firmware-linux <none> > pn firmware-linux-nonfree <none> > pn firmware-myricom <none> > pn firmware-netxen <none> > pn firmware-qlogic <none> > pn firmware-ralink <none> > pn firmware-realtek <none> > pn xen-hypervisor <none> > > -- debconf information: > linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: > false > linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: > true > linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64: >
