Package: watchdog
Version: 5.14-3
Severity: important
Dear Maintainer,
the watchdog package fails to upgrade (from version 5.14-2):
Setting up watchdog (5.14-3) ...
/run/udev or .udevdb or .udev presence implies active udev. Aborting MAKEDEV
invocation.
Job for watchdog.service canceled.
invoke-rc.d: initscript watchdog, action "restart" failed.
dpkg: error processing package watchdog (--configure):
subprocess installed post-installation script returned error exit status 1
Trying to recover at the end of the aptitude run fails too:
Errors were encountered while processing:
watchdog
E: Sub-process /usr/bin/dpkg returned an error code (1)
Failed to perform requested operation on package. Trying to recover:
Setting up watchdog (5.14-3) ...
/run/udev or .udevdb or .udev presence implies active udev. Aborting MAKEDEV
invocation.
Also when I try to restart watchdog manually I end up with no
watchdog process running:
# systemctl status watchdog.service
● watchdog.service - watchdog daemon
Loaded: loaded (/lib/systemd/system/watchdog.service; enabled)
Active: active (running) since Thu 2014-12-11 14:27:42 CET; 22s ago
Process: 29018 ExecStopPost=/bin/sh -c [ $run_wd_keepalive != 1 ] || false
(code=exited, status=1/FAILURE)
Process: 29042 ExecStart=/bin/sh -c [ $run_watchdog != 1 ] || exec
/usr/sbin/watchdog $watchdog_options (code=exited, status=0/SUCCESS)
Process: 29040 ExecStartPre=/bin/sh -c [ -z "${watchdog_module}" ] || [
"${watchdog_module}" = "none" ] || /sbin/modprobe $watchdog_module
(code=exited, status=0/SUCCESS)
Main PID: 29044 (watchdog)
CGroup: /system.slice/watchdog.service
└─29044 /usr/sbin/watchdog
# systemctl restart watchdog.service
Job for watchdog.service canceled.
# systemctl status -l watchdog.service
● watchdog.service - watchdog daemon
Loaded: loaded (/lib/systemd/system/watchdog.service; enabled)
Active: inactive (dead) since Thu 2014-12-11 14:30:15 CET; 33s ago
Process: 29639 ExecStopPost=/bin/sh -c [ $run_wd_keepalive != 1 ] || false
(code=exited, status=1/FAILURE)
Process: 29042 ExecStart=/bin/sh -c [ $run_watchdog != 1 ] || exec
/usr/sbin/watchdog $watchdog_options (code=exited, status=0/SUCCESS)
Process: 29040 ExecStartPre=/bin/sh -c [ -z "${watchdog_module}" ] || [
"${watchdog_module}" = "none" ] || /sbin/modprobe $watchdog_module
(code=exited, status=0/SUCCESS)
Main PID: 29044 (code=exited, status=0/SUCCESS)
Dec 11 14:30:10 grappa watchdog[29044]: stopping daemon (5.14)
Dec 11 14:30:15 grappa systemd[1]: watchdog.service: control process exited,
code=exited status=1
Dec 11 14:30:15 grappa systemd[1]: Unit watchdog.service entered failed state.
Using only the start command works, but ends up with status
1/FAILURE for the service:
# systemctl start watchdog.service
# systemctl status -l watchdog.service
● watchdog.service - watchdog daemon
Loaded: loaded (/lib/systemd/system/watchdog.service; enabled)
Active: active (running) since Thu 2014-12-11 14:31:35 CET; 15s ago
Process: 29639 ExecStopPost=/bin/sh -c [ $run_wd_keepalive != 1 ] || false
(code=exited, status=1/FAILURE)
Process: 29675 ExecStart=/bin/sh -c [ $run_watchdog != 1 ] || exec
/usr/sbin/watchdog $watchdog_options (code=exited, status=0/SUCCESS)
Process: 29673 ExecStartPre=/bin/sh -c [ -z "${watchdog_module}" ] || [
"${watchdog_module}" = "none" ] || /sbin/modprobe $watchdog_module
(code=exited, status=0/SUCCESS)
Main PID: 29678 (watchdog)
CGroup: /system.slice/watchdog.service
└─29678 /usr/sbin/watchdog
Dec 11 14:31:35 grappa watchdog[29678]: starting daemon (5.14):
Dec 11 14:31:35 grappa watchdog[29678]: int=1s realtime=yes sync=no soft=no
mla=0 mem=0
Dec 11 14:31:35 grappa watchdog[29678]: ping: no machine to check
Dec 11 14:31:35 grappa watchdog[29678]: file: no file to check
Dec 11 14:31:35 grappa watchdog[29678]: pidfile: no server process to check
Dec 11 14:31:35 grappa watchdog[29678]: interface: no interface to check
Dec 11 14:31:35 grappa watchdog[29678]: temperature: no sensors to check
Dec 11 14:31:35 grappa watchdog[29678]: test=none(0) repair=none(0)
alive=/dev/watchdog heartbeat=none to=root no_act=no force=no
Dec 11 14:31:35 grappa watchdog[29678]: cannot set timeout 60 (errno = 22 =
'Invalid argument')
Dec 11 14:31:35 grappa watchdog[29678]: hardware watchdog identity: INTCAMT
I'm not sure what the correct severity for this bug should be
(I would consider it RC, so "serious"?). Please adjust the
severity as needed.
Regards
Uwe
PS: The old config file /etc/default/watchdog seems not to be
properly removed from the package, dpkg -s still lists it (as
obsolete). See also the "Configuration Files" section below.
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (750, 'testing'), (650, 'unstable'), (1, 'experimental')
Architecture: i386 (x86_64)
Kernel: Linux 3.14-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages watchdog depends on:
ii debconf [debconf-2.0] 1.5.54
ii init-system-helpers 1.22
ii libc6 2.19-13
ii lsb-base 4.1+Debian13+nmu1
ii makedev 2.3.1-93
ii udev 215-7
watchdog recommends no packages.
watchdog suggests no packages.
-- Configuration Files:
/etc/default/watchdog f6517ce4745ab05fd8cd4da1a39e5906 [Errno 2] No such file
or directory: u'/etc/default/watchdog f6517ce4745ab05fd8cd4da1a39e5906'
/etc/watchdog.conf changed:
watchdog-device = /dev/watchdog
realtime = yes
priority = 1
-- debconf information:
* watchdog/module: none
* watchdog/run_keepalive: true
* watchdog/restart: true
* watchdog/run: true
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
