Package: src:linux
Version: 3.16.3-2
Severity: important
File: nouveau
Dear Maintainer,
System becomes unresponsive with blank screen. After forcing reboot, I find
the following kernel messages from before the reboot:
Nov 22 19:17:24 cerberus kernel: [22339.268881] nouveau E[
PGRAPH][0000:01:00.0] ERROR nsource: LIMIT_ZETA nstatus: PROTECTION_FAULT
Nov 22 19:17:24 cerberus kernel: [22339.268893] nouveau E[
PGRAPH][0000:01:00.0] ch 3 [0x00164b40 jigsaw[7590]] subc 7 class 0x4097 mthd
0x1d94 data 0x000000f1
Nov 22 19:22:24 cerberus kernel: [22639.450040] nouveau E[ DRM] GPU lockup
- switching to software fbcon
Nov 22 19:22:39 cerberus kernel: [22654.460008] nouveau E[Xorg[1004]] failed
to idle channel 0xcccc0001 [Xorg[1004]]
Nov 22 19:22:54 cerberus kernel: [22669.460006] nouveau E[Xorg[1004]] failed
to idle channel 0xcccc0001 [Xorg[1004]]
Nov 22 19:23:09 cerberus kernel: [22684.460016] nouveau E[Xorg[1004]] failed
to idle channel 0xcccc0000 [Xorg[1004]]
Nov 22 19:23:24 cerberus kernel: [22699.460006] nouveau E[Xorg[1004]] failed
to idle channel 0xcccc0000 [Xorg[1004]]
Nov 22 19:23:39 cerberus kernel: [22714.588006] nouveau E[glschool[7591]]
failed to idle channel 0xcccc0000 [glschool[7591]]
Nov 22 19:23:54 cerberus kernel: [22729.588006] nouveau E[glschool[7591]]
failed to idle channel 0xcccc0000 [glschool[7591]]
Nov 22 19:24:09 cerberus kernel: [22744.596005] nouveau E[jigsaw[7590]] failed
to idle channel 0xcccc0000 [jigsaw[7590]]
Nov 22 19:24:24 cerberus kernel: [22759.604014] nouveau E[jigsaw[7590]] failed
to idle channel 0xcccc0000 [jigsaw[7590]]
Nov 22 19:24:26 cerberus kernel: [22759.852001] nouveau E[
PGRAPH][0000:01:00.0] idle timed out with status 0x08800001
Nov 22 19:24:28 cerberus kernel: [22761.853429] nouveau E[
PGRAPH][0000:01:00.0] idle timed out with status 0x08800001
Nov 22 19:24:30 cerberus kernel: [22763.853477] nouveau E[
PGRAPH][0000:01:00.0] idle timed out with status 0x08800001
Nov 22 19:24:32 cerberus kernel: [22765.876885] nouveau E[
PGRAPH][0000:01:00.0] idle timed
out with status 0x08800001
Nov 22 19:31:03 cerberus kernel: [23158.800008] nouveau E[Xorg[7602]] failed
to idle channel 0xcccc0001 [Xorg[7602]]
Nov 22 19:31:09 cerberus kernel: [23164.807999] INFO: rcu_sched detected
stalls on CPUs/tasks: {} (detected by 3, t=5252 jiffies, g=852539, c=852538,
q=166)
Nov 22 19:31:09 cerberus kernel: [23164.808001] INFO: Stall ended before state
dump start
Nov 22 19:31:18 cerberus kernel: [23173.804006] nouveau E[Xorg[7602]] failed
to idle channel 0xcccc0001 [Xorg[7602]]
Nov 22 19:31:18 cerberus kernel: [23173.812254] [sched_delayed] sched: RT
throttling activated
Nov 22 19:31:29 cerberus kernel: [23184.127999] BUG: soft lockup - CPU#3 stuck
for 22s! [Xorg:7602]
Nov 22 19:31:29 cerberus kernel: [23184.128001] Modules linked in: tcp_diag
inet_diag tun cfg80211 rfkill cpufreq_powersave cpufreq_conservative
cpufreq_userspace binfmt_misc cpufreq_stats nfsd auth_rpcgss oid_registry
nfs_acl nfs lockd fscache sunrpc adt7475 iTCO_wdt iTCO_vendor_support nouveau
snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi mxm_wmi wmi
video ttm drm_kms_helper drm snd_hda_intel snd_hda_controller snd_hda_codec
snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_timer kvm_intel kvm snd evdev
i2c_algo_bit serio_raw pcspkr i2c_i801 soundcore i2c_core button lpc_ich
shpchp mfd_core processor thermal_sys coretemp it87 hwmon_vid firewire_sbp2
loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 raid1
md_mod sg sd_mod crc_t10dif sr_mod crct10dif_generic cdrom crct10dif_common
ata_generic hid_generic usbhid hid ahci libahci pata_jmicron firewire_ohci
firewire_core r8169 crc_itu_t mii uhci_hcd ehci_pci libata ehci_hcd scsi_mod
usbcore usb_common
Nov 22 19:31:29 cerberus kernel: [23184.128001] CPU: 3 PID: 7602 Comm: Xorg
Not tainted 3.16-2-amd64 #1 Debian 3.16.3-2
Nov 22 19:31:29 cerberus kernel: [23184.128001] Hardware name: Gigabyte
Technology Co., Ltd. G33M-S2H/G33M-S2H, BIOS F4H 07/29/2008
Nov 22 19:31:29 cerberus kernel: [23184.128001] task: ffff88020854e250 ti:
ffff880213820000 task.ti: ffff880213820000
Nov 22 19:31:29 cerberus kernel: [23184.128001] RIP: 0010:[<ffffffff812bb00a>]
[<ffffffff812bb00a>] ioread32+0x3a/0x40
Nov 22 19:31:29 cerberus kernel: [23184.128001] RSP: 0018:ffff880213823b58
EFLAGS: 00000292
Nov 22 19:31:29 cerberus kernel: [23184.128001] RAX: 0000000000000000 RBX:
ffff8801ef18c9c0 RCX: 0000000000004d57
Nov 22 19:31:29 cerberus kernel: [23184.128001] RDX: 0000000000004d57 RSI:
ffffc90017806048 RDI: ffffc90017806048
Nov 22 19:31:29 cerberus kernel: [23184.128001] RBP: ffff8801ee84de40 R08:
0000000000000007 R09: ffff8801ef18c9c0
Nov 22 19:31:29 cerberus kernel: [23184.128001] R10: ffff8800b7563950 R11:
000000000000000f R12: ffff8800cb95ad71
Nov 22 19:31:29 cerberus kernel: [23184.128001] R13: ffff8800cb95ad00 R14:
ffff88022fff5000 R15: 0000000000000000
Nov 22 19:31:29 cerberus kernel: [23184.128001] FS: 00007f2f45507980(0000)
GS:ffff88022fd80000(0000) knlGS:0000000000000000
Nov 22 19:31:29 cerberus kernel: [23184.128001] CS: 0010 DS: 0000 ES: 0000
CR0: 000000008005003b
Nov 22 19:31:29 cerberus kernel: [23184.128001] CR2: 00007f49154a3000 CR3:
00000000cba3f000 CR4: 00000000000407e0
Nov 22 19:31:29 cerberus kernel: [23184.128001] Stack:
Nov 22 19:31:29 cerberus kernel: [23184.128001] ffffffffa05e534b
ffff8801ef18c9c0 0000000000000000 0000000000000000
Nov 22 19:31:29 cerberus kernel: [23184.128001] ffff88020854e250
ffffffffa05e5945 00000000000003e8 ffff8801ef18c9c0
Nov 22 19:31:29 cerberus kernel: [23184.128001] ffff880036881100
0000000000000000 ffff880036881100 ffff880224d27000
Nov 22 19:31:29 cerberus kernel: [23184.128001] Call Trace:
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffffa05e534b>] ?
nouveau_fence_update+0x5b/0x80 [nouveau]
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffffa05e5945>] ?
nouveau_fence_wait+0xb5/0x190 [nouveau]
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffffa05e3fa5>] ?
nouveau_channel_idle+0x65/0x80 [nouveau]
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffffa05ec60a>] ?
nouveau_abi16_chan_fini.isra.3+0x2a/0x1c0 [nouveau]
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffffa05ec99e>] ?
nouveau_abi16_fini+0x3e/0x80 [nouveau]
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffffa05e2d43>] ?
nouveau_drm_preclose+0x33/0x90 [nouveau]
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffffa040b713>] ?
drm_release+0x53/0x5f0 [drm]
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffff811a6c2a>] ?
__fput+0xca/0x1d0
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffff81083024>] ?
task_work_run+0xb4/0xd0
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffff81067ac1>] ?
do_exit+0x2c1/0xa60
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffff810682d9>] ?
do_group_exit+0x39/0xa0
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffff81076348>] ?
get_signal_to_deliver+0x1c8/0x5a0
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffff81012472>] ?
do_signal+0x42/0x930
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffff81075414>] ?
do_send_sig_info+0x54/0x70
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffff81012dd8>] ?
do_notify_resume+0x78/0xa0
Nov 22 19:31:29 cerberus kernel: [23184.128001] [<ffffffff8150c52a>] ?
int_signal+0x12/0x17
Nov 22 19:31:29 cerberus kernel: [23184.128001] Code: 00 76 0e 0f b7 d7 ed c3
66 0f 1f 84 00 00 00 00 00 48 c7 c6 7d 8c 74 81 e8 14 ff ff ff b8 ff ff ff ff
c3 66 0f 1f 44 00 00 8b 07 <c3> 0f 1f 44 00 00 48 81 fe ff ff 03 00 48 89 f2
77 24 48 81 fe
Nov 22 19:31:33 cerberus kernel: [23188.812005] nouveau E[Xorg[7602]] failed
to idle channel 0xcccc0000 [Xorg[7602]]
Nov 22 19:31:48 cerberus kernel: [23203.816006] nouveau E[Xorg[7602]] failed
to idle channel 0xcccc0000 [Xorg[7602]]
Nov 22 19:31:51 cerberus kernel: [23204.244002] nouveau E[
PGRAPH][0000:01:00.0] idle timed out with status 0x08800001
Nov 22 19:31:53 cerberus kernel: [23206.248002] nouveau E[
PGRAPH][0000:01:00.0] idle timed out with status 0x08800001
Nov 22 19:38:24 cerberus kernel: [23599.240007] nouveau E[Xorg[7659]] failed
to idle channel 0xcccc0001 [Xorg[7659]]
Nov 22 19:38:39 cerberus kernel: [23614.244006] nouveau E[Xorg[7659]] failed
to idle channel 0xcccc0001 [Xorg[7659]]
Nov 22 19:38:54 cerberus kernel: [23629.248005] nouveau E[Xorg[7659]] failed
to idle channel 0xcccc0000 [Xorg[7659]]
Nov 22 19:39:09 cerberus kernel: [23644.252007] nouveau E[Xorg[7659]] failed
to idle channel 0xcccc0000 [Xorg[7659]]
Nov 22 19:39:11 cerberus kernel: [23644.652001] nouveau E[
PGRAPH][0000:01:00.0] idle timed out with status 0x08800001
Nov 22 19:39:13 cerberus kernel: [23646.656002] nouveau E[
PGRAPH][0000:01:00.0] idle timed out with status 0x08800001
-- Package-specific info:
** Version:
Linux version 3.16-2-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.3
(Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16-2-amd64 root=UUID=48ca44ea-960b-4451-a641-3d73c2f2c0ae
ro
** Not tainted
** Kernel log:
[ 16.527115] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 16.527175] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 16.527359] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 16.527417] nouveau [ VBIOS][0000:01:00.0] version 05.71.22.39.08
[ 16.527699] nouveau 0000:01:00.0: irq 44 for MSI/MSI-X
[ 16.527710] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 16.527793] nouveau [ PFB][0000:01:00.0] RAM type: GDDR3
[ 16.527847] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 16.527903] nouveau [ PFB][0000:01:00.0] ZCOMP: 294912 tags
[ 16.549593] nouveau [ VOLT][0000:01:00.0] GPU voltage: 1300000uv
[ 16.558731] sound hdaudioC0D2: autoconfig: line_outs=4
(0x14/0x15/0x16/0x17/0x0) type:line
[ 16.558810] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.558866] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 16.558919] sound hdaudioC0D2: mono: mono_out=0x0
[ 16.558971] sound hdaudioC0D2: dig-out=0x1e/0x0
[ 16.559023] sound hdaudioC0D2: inputs:
[ 16.559075] sound hdaudioC0D2: Rear Mic=0x18
[ 16.559127] sound hdaudioC0D2: Front Mic=0x19
[ 16.559178] sound hdaudioC0D2: Line=0x1a
[ 16.559230] sound hdaudioC0D2: CD=0x1c
[ 16.559280] sound hdaudioC0D2: dig-in=0x1f
[ 16.575407] input: HDA Intel HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 16.575795] input: HDA Intel Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 16.576246] input: HDA Intel Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 16.576508] input: HDA Intel Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 16.576775] input: HDA Intel Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 16.577045] input: HDA Intel Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 16.577316] input: HDA Intel Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 16.577584] input: HDA Intel Line Out Side as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 16.964149] adt7475 3-002e: ADT7473 device, revision 0
[ 16.964208] adt7475 3-002e: Optional features: pwm2
[ 16.964260] adt7475 3-002e: Bypassing attenuators on: in1
[ 17.746866] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts:
(null)
[ 17.760636] systemd-journald[187]: Received request to flush runtime journal
from PID 1
[ 18.044727] r8169 0000:03:05.0 eth0: link down
[ 18.044872] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.056033] r8169 0000:03:05.0 eth0: link down
[ 18.152022] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 18.152087] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 18.152143] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 18.166013] RPC: Registered named UNIX socket transport module.
[ 18.166071] RPC: Registered udp transport module.
[ 18.166122] RPC: Registered tcp transport module.
[ 18.166173] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.172063] nouveau [ CLK][0000:01:00.0] 20: core 275 MHz shader 275
MHz memory 660 MHz
[ 18.172143] nouveau [ CLK][0000:01:00.0] 21: core 680 MHz shader 630
MHz memory 660 MHz
[ 18.172216] nouveau [ CLK][0000:01:00.0] 22: core 700 MHz shader 650
MHz memory 660 MHz
[ 18.172297] nouveau [ CLK][0000:01:00.0] --: core 275 MHz shader 275
MHz memory 405 MHz
[ 18.172470] [TTM] Zone kernel: Available graphics memory: 4097302 kiB
[ 18.172525] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 18.172579] [TTM] Initializing pool allocator
[ 18.172636] [TTM] Initializing DMA pool allocator
[ 18.172699] nouveau [ DRM] VRAM: 505 MiB
[ 18.172751] nouveau [ DRM] GART: 512 MiB
[ 18.172804] nouveau [ DRM] TMDS table version 1.1
[ 18.172856] nouveau W[ DRM] TMDS table script pointers not stubbed
[ 18.172910] nouveau [ DRM] DCB version 3.0
[ 18.172962] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 18.173017] nouveau [ DRM] DCB outp 01: 03000302 00000000
[ 18.173072] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 18.173126] nouveau [ DRM] DCB outp 03: 0c011312 00000000
[ 18.173181] nouveau [ DRM] DCB outp 04: 020223f1 00c0c080
[ 18.173235] nouveau [ DRM] DCB conn 00: 1030
[ 18.173323] nouveau [ DRM] DCB conn 01: 2130
[ 18.173366] FS-Cache: Loaded
[ 18.173459] nouveau [ DRM] DCB conn 02: 0210
[ 18.173545] nouveau [ DRM] DCB conn 03: 0211
[ 18.173629] nouveau [ DRM] DCB conn 04: 0213
[ 18.173838] nouveau [ DRM] Saving VGA fonts
[ 18.211869] FS-Cache: Netfs 'nfs' registered for caching
[ 18.240687] Installing knfsd (copyright (C) 1996o...@monad.swb.de).
[ 18.244368] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 18.244423] [drm] Driver supports precise vblank timestamp query.
[ 18.244481] nouveau [ DRM] 0xC585: Parsing digital output script table
[ 18.294152] nouveau [ DRM] 0xC5CE: Parsing digital output script table
[ 18.350274] nouveau [ DRM] MM: using M2MF for buffer copies
[ 18.350335] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 4)
[ 18.436100] nouveau [ DRM] allocated 1600x1200 fb: 0x9000, bo
ffff88022605e800
[ 18.436244] fbcon: nouveaufb (fb0) is primary device
[ 18.457238] nouveau [ DRM] 0xC585: Parsing digital output script table
[ 18.527030] nouveau [ DRM] 0xC5CE: Parsing digital output script table
[ 18.577476] Console: switching to colour frame buffer device 200x56
[ 18.578329] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 18.578336] nouveau 0000:01:00.0: registered panic notifier
[ 18.592288] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on
minor 0
[ 19.244025] floppy0: no floppy controllers found
[ 21.495516] r8169 0000:03:05.0 eth0: link up
[ 21.495535] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 100.764553] cfg80211: Calling CRDA to update world regulatory domain
[ 101.015693] cfg80211: World regulatory domain updated:
[ 101.015949] cfg80211: DFS Master region: unset
[ 101.015954] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 101.016457] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 101.016728] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm), (N/A)
[ 101.017080] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000
mBm), (N/A)
[ 101.017451] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 101.017818] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000
mBm), (N/A)
[ 101.018185] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0
mBm), (N/A)
[ 101.227805] tun: Universal TUN/TAP device driver, 1.6
[ 101.228091] tun: (C) 1999-2004 Max Krasnyansky<m...@qualcomm.com>
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: G33M-S2H
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F4H
board_vendor: Gigabyte Technology Co., Ltd.
board_name: G33M-S2H
board_version: x.x
** Loaded modules:
tcp_diag
inet_diag
tun
cfg80211
rfkill
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
binfmt_misc
cpufreq_stats
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
adt7475
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_codec_hdmi
snd_hda_intel
snd_hda_controller
nouveau
snd_hda_codec
snd_hwdep
mxm_wmi
wmi
video
ttm
iTCO_wdt
iTCO_vendor_support
drm_kms_helper
snd_pcm_oss
drm
i2c_algo_bit
snd_mixer_oss
processor
pcspkr
kvm_intel
kvm
snd_pcm
button
snd_timer
evdev
serio_raw
i2c_i801
i2c_core
snd
soundcore
lpc_ich
mfd_core
shpchp
thermal_sys
coretemp
it87
hwmon_vid
firewire_sbp2
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
raid1
md_mod
sg
sd_mod
crc_t10dif
sr_mod
crct10dif_generic
cdrom
crct10dif_common
ata_generic
hid_generic
usbhid
hid
firewire_ohci
firewire_core
ahci
libahci
pata_jmicron
ehci_pci
crc_itu_t
libata
uhci_hcd
r8169
ehci_hcd
mii
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller [8086:29c0] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at e000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at e100 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e500 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f6005000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 02)
Subsystem: Giga-byte Technology Device [1458:a022]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f6000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f3000000-f3ffffff
Prefetchable memory behind bridge: 00000000f6100000-00000000f62fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e200 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e300 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f6004000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f4000000-f5ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface
Controller [8086:2918] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801IB (ICH9) 4 port SATA
AHCI Controller [8086:2923] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at e600 [size=8]
Region 1: I/O ports at e700 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e900 [size=4]
Region 4: I/O ports at ea00 [size=32]
Region 5: Memory at f6006000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f6007000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: nVidia Corporation G71 [GeForce 7900
GT/GTO] [10de:0291] (rev a1) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation NX7900GTO-T2D512E [7900 GTO] [10de:042b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f1000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at b000 [size=128]
[virtual] Expansion ROM at f2000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB368 IDE controller
[197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c100 [size=4]
Region 2: I/O ports at c200 [size=8]
Region 3: I/O ports at c300 [size=4]
Region 4: I/O ports at c400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
03:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet [10ec:8167] (rev 10)
Subsystem: Giga-byte Technology Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at d000 [size=256]
Region 1: Memory at f5005000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Device [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f5000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.00-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
