Package: urjtag Version: 0.10+r2007-1.2 Severity: important Dear Maintainer,
urjtag 0.10+r2007-1.2 exits with segmentation fault during the detect command, whereas version 0.10+r2007-1 works fine. --snip-- jtag> cable usbblaster Connected to libftdi driver. jtag> detect IR length: 14 Chain length: 2 Device Id: 11110101000001000110000010010011 (0xF5046093) Manufacturer: Xilinx (0x093) Part(0): xcf04s (0x5046) Stepping: 15 Filename: /usr/share/urjtag/xilinx/xcf04s/xcf04s Segmentation fault --snip-- urjtag is used to program a Nexys2 FPGA board with VOTI FX2-firmware. The last lines of a ltrace are attached. Thanks! Christian -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (1001, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=, LC_CTYPE= (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages urjtag depends on: ii libc6 2.19-13 ii libftdi1 0.20-2 ii libreadline6 6.3-8+b1 ii libusb-0.1-4 2:0.1.12-25 urjtag recommends no packages. urjtag suggests no packages. -- no debconf information
----
--snip
---
strlen("xcf04s")
= 6
__strncat_chk(0x7fff8305ba00, 0x1c3e430, 20, 21)
= 0x7fff8305ba00
strrchr("/usr/share/urjtag/xilinx/PARTS", '/')
= "/PARTS"
__strncat_chk(0x7fff8305ba40, 0x1c3e450, 998, 1024)
= 0x7fff8305ba40
__strncat_chk(0x7fff8305ba40, 0x47c956, 992, 1024)
= 0x7fff8305ba40
malloc(24)
= 0x1c3e070
malloc(4)
= 0x1c3d980
memset(0x1c3d980, '\0', 4)
= 0x1c3d980
malloc(5)
= 0x1c3e1b0
memcpy(0x1c3d980, "\001\001\001\001", 4)
= 0x1c3d980
free(0x1c3e450)
= <void>
free(0x1c3e430)
= <void>
fopen("/usr/share/urjtag/xilinx/xcf04s/"..., "re")
= 0x1c3e1d0
malloc(24)
= 0x1c3e430
malloc(4)
= 0x1c3e450
memset(0x1c3e450, '\0', 4)
= 0x1c3e450
malloc(5)
= 0x1c3e510
__getdelim(0x7fff8305b908, 0x7fff8305b910, 10, 0x1c3e1d0)
= 14
__ctype_b_loc()
= 0x7f7782b886a8
__rawmemchr(0x1c3e470, 0, 48, 0xa30097334306663)
= 0x1c3e47d
__ctype_b_loc()
= 0x7f7782b886a8
__ctype_b_loc()
= 0x7f7782b886a8
strlen("0000")
= 4
__rawmemchr(0x1c3e470, 0, 0x6010, 1136)
= 0x1c3e474
__getdelim(0x7fff8305b908, 0x7fff8305b910, 10, 0x1c3e1d0)
= 15
__ctype_b_loc()
= 0x7f7782b886a8
__rawmemchr(0x1c3e470, 0, 49, 0xa35310973343066)
= 0x1c3e47e
__ctype_b_loc()
= 0x7f7782b886a8
__ctype_b_loc()
= 0x7f7782b886a8
strlen("1111")
= 4
__rawmemchr(0x1c3e470, 0, 0xc010, 1136)
= 0x1c3e474
__ctype_b_loc()
= 0x7f7782b886a8
__strdup(0x1c3e475, 0x1c3d980, 1, 9)
= 0x1c3e410
__strdup(0x1c3e47c, 0x7f7781de3640, 0, 49)
= 0x1c3e4f0
free(0x1c3e470)
= <void>
fclose(0x1c3e1d0)
= 0
free(0x1c3e450)
= <void>
free(0x1c3e510)
= <void>
free(0x1c3e430)
= <void>
free(0x1c3d980)
= <void>
free(0x1c3e1b0)
= <void>
free(0x1c3e070)
= <void>
dcgettext(0, 0x47c973, 5, 0x1c3e1a0)
= 0x47c973
__vfprintf_chk(0x7f778203b2a0, 1, 0x47c973, 0x7fff8305b850)
= 19
fflush(0x7f778203b2a0)
= 0
strlen("15")
= 2
__strncat_chk(0x7fff8305b9f0, 0x1c3e4f0, 8, 9)
= 0x7fff8305b9f0
strrchr("/usr/share/urjtag/xilinx/xcf04s/"..., '/')
= "/STEPPINGS"
__strncat_chk(0x7fff8305ba40, 0x1c3e410, 991, 1024)
= 0x7fff8305ba40
dcgettext(0, 0x474c0d, 5, 988)
= 0x474c0d
__vfprintf_chk(0x7f778203b2a0, 1, 0x474c0d, 0x7fff8305b850)
= 55
fflush(0x7f778203b2a0)
= 0
__strcpy_chk(0x1c3e120, 0x7fff8305ba20, 26, 54)
= 0x1c3e120
__strcpy_chk(0x1c3e13a, 0x7fff8305ba00, 21, 0x1c3e13a)
= 0x1c3e13a
__strcpy_chk(0x1c3e14f, 0x7fff8305b9f0, 9, 0)
= 0x1c3e14f
fopen("/usr/share/urjtag/xilinx/xcf04s/"..., "re")
= 0x1c3e1d0
malloc(168)
= 0x1c3e530
malloc(208)
= 0x1c3e5e0
malloc(12)
= 0x1c3e070
malloc(65544)
= 0x1c50fa0
malloc(8)
= 0x1c3e1b0
malloc(72)
= 0x1c3daa0
malloc(16386)
= 0x1c3e6c0
__errno_location()
= 0x7f7782b88690
fileno(0x7f778203a888)
= -1
isatty(-1)
= 0
__errno_location()
= 0x7f7782b88690
fread(0x1c3e6c0, 1, 8192, 0x7f778203a888 <no return ...>
--- SIGSEGV (Segmentation fault) ---
+++ killed by SIGSEGV +++
