Package: src:linux Version: 3.16.5-1 Severity: normal Hi,
I'm using my computer to read DVD images with mplayer on the second screen attached to HDMI (Intel card). This HDMI output is linked to an AV receiver. I do not use this installation very often. But, a few days ago, I did not succeed into sending sound and video throught HDMI. My goal here was to send 6 channels through HDMI (so the sound is decoded by mplayer and sent as PCM flows). It does not work. mplayer displays: [AO_ALSA] Unable to set buffer time near: Invalid argument Failed to initialize audio driver 'alsa:device=hw=0.7' Could not open/initialize audio device -> no sound. Audio: no sound And then, of course, no sound. If I send the sound through spdif (another plug also connected to the AV receiver), it works (but, of cause, with only two channels) If I use HDMI for the sound and I ask mplayer to use only 2 channels, it works. If I use HDMI for the sound and I ask mplayer to use 1, 3, 4, 5 or 6 channels, it fails with the previous message After trying lots of configuration, after googling a lot, I found this webpage: http://mailman.alsa-project.org/pipermail/alsa-devel/2014-February/072265.html And, indeed, I was suffering the same bug. With 64 as value in /proc/asound/card0/pcm7p/sub0/prealloc, I have the previous error message from mplayer. But mplayer works fine if I write 63, 65 and 128 in /proc/asound/card0/pcm7p/sub0/prealloc (I did not test other values) So, it seems to me that there is a bug with the 64 value when using not 2 channels. Even if this bug is not fixed, I hope this bug report will help people with similar problems as there is an easy workaround. Regards, Vincent -- Package-specific info: ** Version: Linux version 3.16-3-amd64 (debian-ker...@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-12) ) #1 SMP Debian 3.16.5-1 (2014-10-10) ** Command line: BOOT_IMAGE=/vmlinuz-3.16-3-amd64 root=/dev/mapper/aya+raid1-root ro init=/bin/systemd quiet systemd.log_level=debug ** Not tainted ** Kernel log: [ 1523.017597] kvm [4538]: vcpu0 unhandled rdmsr: 0x345 [ 1523.018224] kvm_set_msr_common: 22 callbacks suppressed [ 1523.018225] kvm [4538]: vcpu0 unhandled wrmsr: 0x680 data 0 [ 1523.018832] kvm [4538]: vcpu0 unhandled wrmsr: 0x6c0 data 0 [ 1523.019386] kvm [4538]: vcpu0 unhandled wrmsr: 0x681 data 0 [ 1523.019944] kvm [4538]: vcpu0 unhandled wrmsr: 0x6c1 data 0 [ 1523.020499] kvm [4538]: vcpu0 unhandled wrmsr: 0x682 data 0 [ 1523.021053] kvm [4538]: vcpu0 unhandled wrmsr: 0x6c2 data 0 [ 1523.021618] kvm [4538]: vcpu0 unhandled wrmsr: 0x683 data 0 [ 1523.022154] kvm [4538]: vcpu0 unhandled wrmsr: 0x6c3 data 0 [ 1523.046223] kvm [4538]: vcpu0 unhandled wrmsr: 0x684 data 0 [ 1523.046736] kvm [4538]: vcpu0 unhandled wrmsr: 0x6c4 data 0 [ 1523.310505] br-dmz: port 6(vn_urtho_00) entered learning state [ 1523.514824] kvm [4561]: vcpu0 unhandled rdmsr: 0x345 [ 1525.389503] kvm [4578]: vcpu0 unhandled rdmsr: 0x345 [ 1525.713221] br-lan: topology change detected, sending tcn bpdu [ 1525.713240] br-lan: port 4(vn_ogmios_00) entered forwarding state [ 1525.713288] br-kooot1: port 1(eth1) received tcn bpdu [ 1525.713290] br-kooot1: topology change detected, propagating [ 1525.720487] kvm [4595]: vcpu0 unhandled rdmsr: 0x345 [ 1526.257840] br-dmz: topology change detected, sending tcn bpdu [ 1526.257860] br-dmz: port 2(vn_ran_00) entered forwarding state [ 1526.642277] br-dmz: topology change detected, sending tcn bpdu [ 1526.642300] br-dmz: port 3(vn_yoko_00) entered forwarding state [ 1527.090778] br-dmz: topology change detected, sending tcn bpdu [ 1527.090788] br-dmz: port 4(vn_talia_00) entered forwarding state [ 1527.475211] br-lan: topology change detected, sending tcn bpdu [ 1527.475219] br-lan: port 5(vn_belgarath_00) entered forwarding state [ 1527.475262] br-kooot1: port 1(eth1) received tcn bpdu [ 1527.475263] br-kooot1: topology change detected, propagating [ 1527.875668] br-dmz: topology change detected, sending tcn bpdu [ 1527.875688] br-dmz: port 5(vn_rosee_00) entered forwarding state [ 1528.324173] br-dmz: topology change detected, sending tcn bpdu [ 1528.324183] br-dmz: port 6(vn_urtho_00) entered forwarding state [ 1576.927444] br-lan: port 3(vn_kooot_01) received tcn bpdu [ 1576.927448] br-lan: topology change detected, sending tcn bpdu [ 1576.927542] br-kooot1: port 1(eth1) received tcn bpdu [ 1576.927546] br-kooot1: topology change detected, propagating [ 1774.650959] systemd[1]: Sent message type=signal sender=n/a destination=n/a object=/org/freedesktop/systemd1/unit/loc_2densure_2dldap_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=602 reply_cookie=0 error=n/a [ 1774.662967] systemd[1]: Got notification message for unit systemd-machined.service [ 1774.674971] systemd[1]: systemd-machined.service: Got notification message from PID 4470 (WATCHDOG=1...) [ 1774.687022] systemd[1]: systemd-machined.service: got WATCHDOG=1 [ 1774.699007] systemd[1]: Got notification message for unit systemd-machined.service [ 1774.710985] systemd[1]: systemd-machined.service: Got notification message from PID 4470 (WATCHDOG=1...) [ 1774.723002] systemd[1]: systemd-machined.service: got WATCHDOG=1 [ 1774.735050] systemd[1]: Got notification message for unit systemd-logind.service [ 1774.747034] systemd[1]: systemd-logind.service: Got notification message from PID 3439 (WATCHDOG=1...) [ 1774.759080] systemd[1]: systemd-logind.service: got WATCHDOG=1 [ 1859.903402] systemd[1]: user@2001.service: Got notification message from PID 8697 (READY=1...) [ 1859.915407] systemd[1]: user@2001.service: got READY=1 [ 1859.927416] systemd[1]: user@2001.service changed start -> running [ 1859.939474] systemd[1]: Job user@2001.service/start finished, result=done [ 1859.963455] systemd[1]: Sent message type=signal sender=n/a destination=n/a object=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=JobRemoved cookie=774 reply_cookie=0 error=n/a [ 1859.975470] systemd[1]: Sent message type=method_call sender=n/a destination=org.freedesktop.DBus object=/org/freedesktop/DBus interface=org.freedesktop.DBus member=RemoveMatch cookie=775 reply_cookie=0 error=n/a [ 1859.987467] systemd[1]: user@2001.service: got STATUS=Startup finished in 56ms. [ 1859.999493] systemd[1]: Got notification message for unit user@2001.service [ 1860.011491] systemd[1]: user@2001.service: Got notification message from PID 8697 (READY=1...) [ 1860.023502] systemd[1]: user@2001.service: got STATUS=Startup finished in 56ms. [ 1860.035523] systemd[1]: Sent message type=signal sender=n/a destination=n/a object=/org/freedesktop/systemd1/unit/user_402001_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=776 reply_cookie=0 error=n/a [ 1860.047552] systemd[1]: Sent message type=signal sender=n/a destination=n/a object=/org/freedesktop/systemd1/unit/user_402001_2eservice interface=org.freedesktop.DBus.Properties member=PropertiesChanged cookie=777 reply_cookie=0 error=n/a [ 2338.875785] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. [ 2395.925900] systemd[1]: systemd-journald.service: got WATCHDOG=1 [ 2395.937949] systemd[1]: Got notification message for unit systemd-logind.service [ 2395.949922] systemd[1]: systemd-logind.service: Got notification message from PID 3439 (WATCHDOG=1...) [ 2395.965933] systemd[1]: systemd-logind.service: got WATCHDOG=1 [ 2395.977953] systemd[1]: Got notification message for unit systemd-logind.service [ 2395.989963] systemd[1]: systemd-logind.service: Got notification message from PID 3439 (WATCHDOG=1...) [ 5276.623007] systemd[1]: /etc [ 8236.627633] systemd[1]: systemd-logind.service: got WATCHDOG=1 [ 8236.639696] systemd[1]: Received SIGCHLD from PID 9254 (sshd). [ 8236.651669] systemd[1]: Child 9254 (sshd) died (code=exited, status=255/n/a) [ 8236.663681] systemd[1]: Got message type=signal sender=org.freedesktop.DBus destination=n/a object=/org/freedesktop/DBus interface=org.freedesktop.DBus member=NameOwnerChanged cookie=39 reply_cookie=0 error=n/a [ 8236.675690] systemd[1]: Accepted new private connection. [ 8921.350394] systemd[1]: Collecting session-68.scope [ 8921.362407] systemd[1]: Sent message type=signal sender=n/a destination=n/a object=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=UnitRemoved cookie=938 reply_cookie=0 error=n/a [ 8921.374423] systemd[1]: Accepted new private connection. [ 8921.386427] systemd[1]: Got message type=method_call sender=:1.1 destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/session_2d68_2escope interface=org.freedesktop.DBus.Properties member=Get cookie=249 reply_cookie=0 error=n/a [ 8921.402447] systemd[1]: Failed to load configuration for session-68.scope: No such file or directory [ 8921.414463] systemd[1]: Sent message type=method_return sender=n/a destination=:1.1 object=n/a interface=n/a member=n/a cookie=939 reply_cookie=249 error=n/a [ 8921.426478] systemd[1]: Collecting session-68.scope [ 8921.438490] systemd[1]: Sent message type=signal sender=n/a destination=n/a object=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=UnitNew cookie=940 reply_cookie=0 error=n/a [ 8921.450502] systemd[1]: Sent message type=signal sender=n/a destination=n/a object=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=UnitRemoved cookie=941 reply_cookie=0 error=n/a [ 9386.941352] systemd[1]: Got message type=signal sender=org.freedesktop.DBus destination=n/a object=/org/freedesktop/DBus interface=org.freedesktop.DBus member=NameOwnerChanged cookie=60 reply_cookie=0 error=n/a [ 9386.953354] systemd[1]: Accepted new private connection. [ 9386.965380] systemd[1]: Got message type=method_call sender=:1.1 destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/session_2d13_2escope interface=org.freedesktop.systemd1.Scope member=Abandon cookie=262 reply_cookie=0 error=n/a [ 9386.977393] systemd[1]: Sent message type=method_call sender=n/a destination=org.freedesktop.DBus object=/org/freedesktop/DBus interface=org.freedesktop.DBus member=GetConnectionUnixUser cookie=955 reply_cookie=0 error=n/a [ 9386.989407] systemd[1]: session-13.scope: cgroup is empty [13054.319620] perf interrupt took too long (2510 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [32306.993350] systemd[1]: /usr/local/lib/systemd/system [32307.005400] systemd[1]: /lib/systemd/system [32307.017369] systemd[1]: /usr/lib/systemd/system [32307.029376] systemd[1]: Looking for SysV init scripts in: [32307.041406] systemd[1]: /etc/init.d [38653.901040] systemd[1]: Sent message type=method_return sender=n/a destination=:1.1 object=n/a interface=n/a member=n/a cookie=1017 reply_cookie=297 error=n/a [38653.913064] systemd[1]: Collecting session-281.scope [38653.925106] systemd[1]: Sent message type=signal sender=n/a destination=n/a object=/org/freedesktop/systemd1 interface=org.freedesktop.systemd1.Manager member=UnitRemoved cookie=1018 reply_cookie=0 error=n/a [38653.937090] systemd[1]: Got notification message for unit systemd-machined.service [38653.949102] systemd[1]: systemd-machined.service: Got notification message from PID 4470 (WATCHDOG=1...) [38653.961148] systemd[1]: systemd-machined.service: got WATCHDOG=1 [67497.778557] hrtimer: interrupt took 6419 ns ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: H67A-UD3H-B3 product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F8 board_vendor: Gigabyte Technology Co., Ltd. board_name: H67A-UD3H-B3 board_version: x.x ** Loaded modules: vhost_net vhost macvtap macvlan tun cpufreq_powersave cpufreq_userspace cpufreq_conservative cpufreq_stats binfmt_misc dm_snapshot dm_bufio nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc ctr ccm bridge 8021q garp stp mrp llc iTCO_wdt iTCO_vendor_support pl2303 usbserial x86_pkg_temp_thermal intel_powerclamp intel_rapl kvm_intel kvm crc32_pclmul ghash_clmulni_intel arc4 aesni_intel ath9k ath9k_common ath9k_hw aes_x86_64 ath mac80211 cfg80211 rfkill lrw gf128mul glue_helper ablk_helper cryptd pcspkr snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss serio_raw snd_pcm mei_me i2c_i801 snd_timer shpchp lpc_ich evdev mei mfd_core snd soundcore processor coretemp it87 hwmon_vid firewire_sbp2 loop fuse autofs4 ext4 crc16 mbcache jbd2 dm_mod raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq sr_mod cdrom raid1 md_mod sg hid_generic usbhid hid sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel firewire_ohci 3c59x firewire_core crc_itu_t uhci_hcd sata_via ahci libahci ehci_pci i915 ehci_hcd i2c_algo_bit video r8169 libata mii drm_kms_helper xhci_hcd drm scsi_mod usbcore i2c_core usb_common thermal_sys button ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: snb_uncore 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: fbc00000-fbcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 49 Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at ff00 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:1c3a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 50 Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: Gigabyte Technology Co., Ltd Device [1458:a102] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at fbff4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: dfa00000-dfbfffff Prefetchable memory behind bridge: 00000000dfc00000-00000000dfdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbb00000-fbbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Memory behind bridge: fba00000-fbafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Prefetchable memory behind bridge: 00000000fbe00000-00000000fbefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev b5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=00, secondary=06, subordinate=07, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fbd00000-fbdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation H67 Express Chipset Family LPC Controller [8086:1c4a] (rev 05) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:b005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 47 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fd00 [size=4] Region 2: I/O ports at fc00 [size=8] Region 3: I/O ports at fb00 [size=4] Region 4: I/O ports at fa00 [size=32] Region 5: Memory at fbffc000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbffb000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus 01:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fbcfe000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 03:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0]) Subsystem: ASMedia Technology Inc. Device [1b21:1060] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 48 Region 0: I/O ports at ef00 [size=8] Region 1: I/O ports at ee00 [size=4] Region 2: I/O ports at ed00 [size=8] Region 3: I/O ports at ec00 [size=4] Region 4: I/O ports at eb00 [size=32] Region 5: Memory at fbbff000 (32-bit, non-prefetchable) [size=512] [virtual] Expansion ROM at fbb00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ahci 04:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Qualcomm Atheros Device [168c:30a1] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fbaf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 46 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fbeff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fbef8000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 06:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device [1283:8892] (rev 10) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 4 bytes Bus: primary=06, secondary=07, subordinate=07, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fbd00000-fbdfffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat+ DiscTmrSERREn- Capabilities: <access denied> 07:00.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74) Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC [10b7:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2500ns min, 2500ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at cf00 [size=128] Region 1: Memory at fbdff000 (32-bit, non-prefetchable) [size=128] [virtual] Expansion ROM at fbd00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: 3c59x 07:01.0 RAID bus controller [0104]: VIA Technologies, Inc. VT6421 IDE/SATA Controller [1106:3249] (rev 50) Subsystem: VIA Technologies, Inc. VT6421 IDE/SATA Controller [1106:3249] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at ce00 [size=16] Region 1: I/O ports at cd00 [size=16] Region 2: I/O ports at cc00 [size=16] Region 3: I/O ports at cb00 [size=16] Region 4: I/O ports at ca00 [size=32] Region 5: I/O ports at c600 [size=256] [virtual] Expansion ROM at fbd20000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: sata_via 07:02.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c900 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 07:02.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 07:02.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Controller [1106:3104] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 4 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbdfe000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 07:03.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI]) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbdfd000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fbdf8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 005 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 003 Device 005: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse Bus 003 Device 004: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Bus 003 Device 010: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 003 Device 009: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 003 Device 008: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 003 Device 007: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 003 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'oldstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16-3-amd64 (SMP w/4 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-3.16-3-amd64 depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.16-3-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.16-3-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-22 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16-3-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.43 pn xen-hypervisor <none> -- debconf information: linux-image-3.16-3-amd64/postinst/depmod-error-initrd-3.16-3-amd64: false linux-image-3.16-3-amd64/postinst/mips-initrd-3.16-3-amd64: linux-image-3.16-3-amd64/prerm/removing-running-kernel-3.16-3-amd64: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
