Package: gitso Version: 0.6.2+svn158+dfsg-1 Severity: normal Dear Maintainer,
connecting to a supporter leads to a crash with assertion failure, leaving the supportee without the possibility to cleanly terminate the session. Please have a look at the attached console log. Regards, Tim -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.14-2-amd64 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gitso depends on: ii python 2.7.8-1 ii python-wxtools 3.0.0.0+dfsg-4 ii x11vnc 0.9.13-1.1+b1 ii xtightvncviewer 1.3.9-6.4 gitso recommends no packages. gitso suggests no packages. -- no debconf information
guyintrouble@hiscomputer:~$ gitso 31/08/2014 15:22:52 x11vnc version: 0.9.13 lastmod: 2011-08-10 pid: 6086 31/08/2014 15:22:52 Using X display :0.0 31/08/2014 15:22:52 rootwin: 0x1c0 reswin: 0x2400001 dpy: 0x1c23970 31/08/2014 15:22:52 31/08/2014 15:22:52 ------------------ USEFUL INFORMATION ------------------ 31/08/2014 15:22:52 X DAMAGE available on display, using it for polling hints. 31/08/2014 15:22:52 To disable this behavior use: '-noxdamage' 31/08/2014 15:22:52 31/08/2014 15:22:52 Most compositing window managers like 'compiz' or 'beryl' 31/08/2014 15:22:52 cause X DAMAGE to fail, and so you may not see any screen 31/08/2014 15:22:52 updates via VNC. Either disable 'compiz' (recommended) or 31/08/2014 15:22:52 supply the x11vnc '-noxdamage' command line option. 31/08/2014 15:22:52 31/08/2014 15:22:52 Wireframing: -wireframe mode is in effect for window moves. 31/08/2014 15:22:52 If this yields undesired behavior (poor response, painting 31/08/2014 15:22:52 errors, etc) it may be disabled: 31/08/2014 15:22:52 - use '-nowf' to disable wireframing completely. 31/08/2014 15:22:52 - use '-nowcr' to disable the Copy Rectangle after the 31/08/2014 15:22:52 moved window is released in the new position. 31/08/2014 15:22:52 Also see the -help entry for tuning parameters. 31/08/2014 15:22:52 You can press 3 Alt_L's (Left "Alt" key) in a row to 31/08/2014 15:22:52 repaint the screen, also see the -fixscreen option for 31/08/2014 15:22:52 periodic repaints. 31/08/2014 15:22:52 31/08/2014 15:22:52 XFIXES available on display, resetting cursor mode 31/08/2014 15:22:52 to: '-cursor most'. 31/08/2014 15:22:52 to disable this behavior use: '-cursor arrow' 31/08/2014 15:22:52 or '-noxfixes'. 31/08/2014 15:22:52 using XFIXES for cursor drawing. 31/08/2014 15:22:52 GrabServer control via XTEST. 31/08/2014 15:22:52 31/08/2014 15:22:52 Scroll Detection: -scrollcopyrect mode is in effect to 31/08/2014 15:22:52 use RECORD extension to try to detect scrolling windows 31/08/2014 15:22:52 (induced by either user keystroke or mouse input). 31/08/2014 15:22:52 If this yields undesired behavior (poor response, painting 31/08/2014 15:22:52 errors, etc) it may be disabled via: '-noscr' 31/08/2014 15:22:52 Also see the -help entry for tuning parameters. 31/08/2014 15:22:52 You can press 3 Alt_L's (Left "Alt" key) in a row to 31/08/2014 15:22:52 repaint the screen, also see the -fixscreen option for 31/08/2014 15:22:52 periodic repaints. 31/08/2014 15:22:52 31/08/2014 15:22:52 Client Side Caching: -ncache mode is in effect to provide 31/08/2014 15:22:52 client-side pixel data caching. This speeds up 31/08/2014 15:22:52 iconifying/deiconifying windows, moving and raising 31/08/2014 15:22:52 windows, and reposting menus. In the simple CopyRect 31/08/2014 15:22:52 encoding scheme used (no compression) a huge amount 31/08/2014 15:22:52 of extra memory (20-100MB) is used on both the server and 31/08/2014 15:22:52 client sides. This mode works with any VNC viewer. 31/08/2014 15:22:52 However, in most you can actually see the cached pixel 31/08/2014 15:22:52 data by scrolling down, so you need to re-adjust its size. 31/08/2014 15:22:52 See http://www.karlrunge.com/x11vnc/faq.html#faq-client-caching. 31/08/2014 15:22:52 If this mode yields undesired behavior (poor response, 31/08/2014 15:22:52 painting errors, etc) it may be disabled via: '-ncache 0' 31/08/2014 15:22:52 You can press 3 Alt_L's (Left "Alt" key) in a row to 31/08/2014 15:22:52 repaint the screen, also see the -fixscreen option for 31/08/2014 15:22:52 periodic repaints. 31/08/2014 15:22:52 31/08/2014 15:22:52 XKEYBOARD: 31/08/2014 15:22:52 Switching to -xkb mode to recover these keysyms: 31/08/2014 15:22:52 xkb noxkb Keysym ("X" means present) 31/08/2014 15:22:52 --- ----- ----------------------------- 31/08/2014 15:22:52 X 0x40 at 31/08/2014 15:22:52 X 0x5b bracketleft 31/08/2014 15:22:52 X 0x5d bracketright 31/08/2014 15:22:52 X 0x7b braceleft 31/08/2014 15:22:52 X 0x7d braceright 31/08/2014 15:22:52 X 0x7c bar 31/08/2014 15:22:52 X 0x5c backslash 31/08/2014 15:22:52 31/08/2014 15:22:52 If this makes the key mapping worse you can 31/08/2014 15:22:52 disable it with the "-noxkb" option. 31/08/2014 15:22:52 31/08/2014 15:22:52 31/08/2014 15:22:52 X FBPM extension not supported. 31/08/2014 15:22:52 X display is capable of DPMS. 31/08/2014 15:22:52 -------------------------------------------------------- 31/08/2014 15:22:52 31/08/2014 15:22:52 Default visual ID: 0x21 31/08/2014 15:22:52 Read initial data from X display into framebuffer. 31/08/2014 15:22:52 initialize_screen: fb_depth/fb_bpp/fb_Bpl 24/32/5120 31/08/2014 15:22:52 31/08/2014 15:22:52 X display :0.0 is 32bpp depth=24 true color 31/08/2014 15:22:52 31/08/2014 15:22:52 Autoprobing TCP port 31/08/2014 15:22:52 Autoprobing selected TCP port 5900 31/08/2014 15:22:52 Autoprobing TCP6 port 31/08/2014 15:22:52 Autoprobing selected TCP6 port 5900 31/08/2014 15:22:52 listen6: bind: Address already in use 31/08/2014 15:22:52 Not listening on IPv6 interface. 31/08/2014 15:22:52 31/08/2014 15:22:52 Xinerama is present and active (e.g. multi-head). 31/08/2014 15:22:52 Xinerama: number of sub-screens: 1 31/08/2014 15:22:52 Xinerama: no blackouts needed (only one sub-screen) 31/08/2014 15:22:52 31/08/2014 15:22:52 fb read rate: 165 MB/sec 31/08/2014 15:22:52 fast read: reset -wait ms to: 10 31/08/2014 15:22:52 fast read: reset -defer ms to: 10 31/08/2014 15:22:52 The X server says there are 10 mouse buttons. 31/08/2014 15:22:52 screen setup finished. 31/08/2014 15:22:52 The VNC desktop is: hiscomputer:0 PORT=5900 31/08/2014 15:22:52 Making connection to client on host ${myip} port 5500 31/08/2014 15:22:52 other clients: 31/08/2014 15:22:52 Normal socket connection 31/08/2014 15:22:52 Disabled X server key autorepeat. 31/08/2014 15:22:52 to force back on run: 'xset r on' (3 times) 31/08/2014 15:22:52 incr accepted_client=1 for ${myip}:5500 sock=11 31/08/2014 15:22:52 reverse_connect: ${myip}/${myip} OK 31/08/2014 15:22:52 reverse_connect: turning on auth for ${myip} 31/08/2014 15:22:52 client progressed=0 in 15/10 0.014644 s 31/08/2014 15:22:52 Client Protocol Version 3.8 31/08/2014 15:22:52 Protocol version sent 3.8, using 3.8 31/08/2014 15:22:52 rfbProcessClientSecurityType: executing handler for type 1 31/08/2014 15:22:52 rfbProcessClientSecurityType: returning securityResult for client rfb version >= 3.8 31/08/2014 15:22:53 Pixel format for client ${myip}: 31/08/2014 15:22:53 32 bpp, depth 24, little endian 31/08/2014 15:22:53 true colour: max r 255 g 255 b 255, shift r 16 g 8 b 0 31/08/2014 15:22:53 no translation needed 31/08/2014 15:22:53 Using compression level 1 for client ${myip} 31/08/2014 15:22:53 Using image quality level 6 for client ${myip} 31/08/2014 15:22:53 Using JPEG subsampling 0, Q79 for client ${myip} 31/08/2014 15:22:53 Enabling X-style cursor updates for client ${myip} 31/08/2014 15:22:53 Enabling full-color cursor updates for client ${myip} 31/08/2014 15:22:53 Enabling cursor position updates for client ${myip} 31/08/2014 15:22:53 Enabling LastRect protocol extension for client ${myip} 31/08/2014 15:22:53 Using tight encoding for client ${myip} 31/08/2014 15:22:53 created xdamage object: 0x240002c 31/08/2014 15:22:54 copy_tiles: allocating first_line at size 41 31/08/2014 15:22:55 client useCopyRect: ${myip} -1 31/08/2014 15:22:55 client_set_net: ${myip} 0.0445 GitsoThread.run(pid: 6086) running... 31/08/2014 15:22:55 client 1 network rate 248.2 KB/sec (2523.1 eff KB/sec) 31/08/2014 15:22:55 client 1 latency: 60.4 ms 31/08/2014 15:22:55 dt1: 0.2394, dt2: 0.2226 dt3: 0.0604 bytes: 107152 31/08/2014 15:22:55 link_rate: LR_BROADBAND - 60 ms, 248 KB/s 31/08/2014 15:22:56 set_ncache_xrootpmap: loading background pixmap: 0x0 31/08/2014 15:22:56 snapshotting background... [xcb] Unknown sequence number while processing queue [xcb] Most likely this is a multi-threaded client and XInitThreads has not been called [xcb] Aborting, sorry about that. python: ../../src/xcb_io.c:274: poll_for_event: Zusicherung »!xcb_xlib_threads_sequence_lost« nicht erfüllt. Abgebrochen guyintrouble@hiscomputer:~$ 31/08/2014 15:22:56 done. 31/08/2014 15:22:56 cursor_noshape_updates_clients: 0 31/08/2014 15:22:57 increased wireframe timeouts for slow network connection. 31/08/2014 15:22:57 netrate: 248 KB/sec, latency: 60 ms 31/08/2014 15:22:57 cursor_noshape_updates_clients: 0 31/08/2014 15:23:00 cursor_noshape_updates_clients: 0 31/08/2014 15:23:00 cursor_noshape_updates_clients: 0 31/08/2014 15:23:01 created selwin: 0x240002f 31/08/2014 15:23:01 called initialize_xfixes() 31/08/2014 15:23:01 cursor_noshape_updates_clients: 0
