Package: installation-reports Boot method: CDROM (SCSI) Image version: etch beta1 debian-testing-i386-netinst.iso Date: 23. Nov 2005
Machine: ASUS Desktop Processor: AMD-K6 400MHz Memory: 196MB Partitions: (entire disk 4,5GB) Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/sda1 ext3 4174536 667732 3294748 17% / Output of lspci and lspci -n: 0000:00:00.0 Host bridge: ALi Corporation M1541 (rev 04) 0000:00:01.0 PCI bridge: ALi Corporation M1541 PCI to AGP Controller (rev 04) 0000:00:03.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU] 0000:00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] (rev c3) 0000:00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) 0000:00:0a.0 SCSI storage controller: Adaptec AIC-7861 (rev 03) 0000:00:0f.0 IDE interface: ALi Corporation M5229 IDE (rev c1) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc) 0000:00:00.0 0600: 10b9:1541 (rev 04) 0000:00:01.0 0604: 10b9:5243 (rev 04) 0000:00:03.0 0680: 10b9:7101 0000:00:07.0 0601: 10b9:1533 (rev c3) 0000:00:09.0 0200: 10b7:9200 (rev 74) 0000:00:0a.0 0100: 9004:6178 (rev 03) 0000:00:0f.0 0101: 10b9:5229 (rev c1) 0000:01:00.0 0300: 1002:4c42 (rev dc) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Smooth install. One minor thing: during boot, after Setting kernel variables... done the following message appears: Mounting local filesystems... failed! that's irritating as everything gets (finally?) mounted fine. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
