Package: src:linux
Version: 3.12.9-1~bpo70+1
Severity: important
Dear Maintainer,
The following should setup a gre tunnel which has MTU 1500 and
fragments gre correctly as needed.
ip link add gt0 type gretap remote 10.0.48.1 local 192.168.128.1
ip link set gt0 up
ifconfig gt0 mtu 1500
This works fine on 3.2 from wheezy.
Well, on 3.12 (and also tested on 3.10 from OpenWRT Barrier Breaker)
it does not. For some reason the kernel transmits _ONLY_ the second
frag, not the first (big) one. As aresult anything relying on 1500
mtu GRE breaks outright.
I have noticed that backports is now @ 3.14, I will retest with that
shortly.
-- Package-specific info:
** Version:
Linux version 3.12-0.bpo.1-amd64 (debian-ker...@lists.debian.org) (gcc version
4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.12.9-1~bpo70+1 (2014-02-07)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.12-0.bpo.1-amd64
root=UUID=49a2baa4-c4fb-4b25-a847-da38aabf6eb4 ro quiet rootdelay=10
** Not tainted
** Kernel log:
[ 121.018798] ppdev: user-space parallel port driver
[ 126.617541] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 126.683548] NFSD: starting 90-second grace period (net ffffffff81883dc0)
[ 153.542230] usb 4-3: USB disconnect, device number 2
[ 153.576943] lenovo_tpkbd 0003:17EF:6009.0002: usb_submit_urb(ctrl) failed:
-19
[ 153.577006] lenovo_tpkbd 0003:17EF:6009.0002: usb_submit_urb(ctrl) failed:
-19
[ 180.619815] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 180.652075] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 180.692646] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 181.426186] tg3 0000:04:00.0 eth0: Link is down
[ 184.867657] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 184.870369] device eth2 entered promiscuous mode
[ 185.310452] IPv6: ADDRCONF(NETDEV_CHANGE): tap1: link becomes ready
[ 185.310517] br0: port 2(tap1) entered forwarding state
[ 185.310540] br0: port 2(tap1) entered forwarding state
[ 185.340931] IPv6: ADDRCONF(NETDEV_CHANGE): tap0: link becomes ready
[ 185.341022] br0: port 1(tap0) entered forwarding state
[ 185.341053] br0: port 1(tap0) entered forwarding state
[ 186.308096] br0: port 2(tap1) entered disabled state
[ 186.969420] tg3 0000:04:00.0 eth0: Link is up at 1000 Mbps, full duplex
[ 186.969449] tg3 0000:04:00.0 eth0: Flow control is off for TX and off for RX
[ 187.945130] e1000e: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control:
None
[ 187.945457] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 200.392550] br0: port 1(tap0) entered forwarding state
[ 251.635353] Key type dns_resolver registered
[ 251.665092] NFS: Registering the id_resolver key type
[ 251.665138] Key type id_resolver registered
[ 251.665143] Key type id_legacy registered
[ 499.831589] br0: port 1(tap0) entered disabled state
[ 526.554515] device l2tp0 entered promiscuous mode
[ 526.554713] br0: port 3(l2tp0) entered forwarding state
[ 526.554730] br0: port 3(l2tp0) entered forwarding state
[ 541.589078] br0: port 3(l2tp0) entered forwarding state
[ 906.452815] device l2tp1 entered promiscuous mode
[ 906.452948] br0: port 4(l2tp1) entered forwarding state
[ 906.452964] br0: port 4(l2tp1) entered forwarding state
[ 921.507056] br0: port 4(l2tp1) entered forwarding state
[22276.366266] perf samples too long (2505 > 2500), lowering
kernel.perf_event_max_sample_rate to 50000
[25678.723114] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[33901.361167] nr_pdflush_threads exported in /proc is scheduled for removal
[33901.361441] sysctl: The scan_unevictable_pages sysctl/node-interface has
been disabled for lack of a legitimate use case. If you have one, please send
an email to linux...@kvack.org.
[34047.286645] device br0 entered promiscuous mode
[34054.745393] device br0 left promiscuous mode
[34509.021723] device lo entered promiscuous mode
[34523.995709] device lo left promiscuous mode
[34565.706977] device lo entered promiscuous mode
[34574.849005] device lo left promiscuous mode
[94270.499549] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[100331.491781] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[106812.568949] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[126549.143683] CE: hpet increased min_delta_ns to 20115 nsec
[126549.143785] CE: hpet increased min_delta_ns to 30172 nsec
[126549.143893] CE: hpet increased min_delta_ns to 45258 nsec
[156243.297918] br0: port 4(l2tp1) entered disabled state
[156243.297967] br0: port 3(l2tp0) entered disabled state
[156260.892403] device l2tp1 left promiscuous mode
[156260.892419] br0: port 4(l2tp1) entered disabled state
[156260.892763] device l2tp0 left promiscuous mode
[156260.892769] br0: port 3(l2tp0) entered disabled state
[156260.893006] device tap1 left promiscuous mode
[156260.893012] br0: port 2(tap1) entered disabled state
[156260.893230] device tap0 left promiscuous mode
[156260.893235] br0: port 1(tap0) entered disabled state
[156834.393235] EXT4-fs (loop0): mounted filesystem without journal. Opts:
(null)
[156895.101473] EXT4-fs (loop0): mounted filesystem without journal. Opts:
(null)
[188606.192397] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[248615.949021] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[297764.331884] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[325188.748697] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[337550.727056] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[379617.586358] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[449228.967952] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[451329.319281] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[465671.696144] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[506478.333670] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[535463.524022] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[590552.638478] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[623618.183526] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[652663.061358] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[677086.990416] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[703491.431044] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[719214.175493] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[741718.092508] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[751619.699977] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[770222.842331] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[804128.509664] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[804848.636468] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[935851.016105] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[973057.169751] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1046089.740097] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1056471.581450] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1077955.254450] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1090617.317547] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1118521.880190] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1127043.306963] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1145826.384292] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1151347.282473] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1155487.960779] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1202475.602233] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
[1205416.083424] ICMPv6 checksum failed [2a01:348:6:4c4::1 > 2a01:348:6:4c4::2]
** Model information
sys_vendor: HP
product_name: ProLiant MicroServer
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: O41
** Loaded modules:
nfsv3
nfsv4
dns_resolver
xt_nat
xt_tcpudp
nf_conntrack_ipv6
nf_defrag_ipv6
xt_state
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
autofs4
cpufreq_conservative
cpufreq_userspace
cpufreq_stats
cpufreq_powersave
parport_pc
ppdev
lp
parport
rfcomm
bnep
bluetooth
rfkill
sit
tunnel4
ip_tunnel
binfmt_misc
fuse
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
tun
bridge
stp
llc
l2tp_eth
l2tp_netlink
l2tp_core
loop
joydev
radeon
ttm
drm_kms_helper
drm
i2c_algo_bit
sp5100_tco
kvm_amd
shpchp
i2c_piix4
pcspkr
evdev
kvm
acpi_cpufreq
i2c_core
k10temp
amd64_edac_mod
edac_mce_amd
edac_core
processor
button
thermal_sys
ext4
crc16
mbcache
jbd2
raid0
raid1
md_mod
hid_lenovo_tpkbd
usbhid
hid
sg
sd_mod
crc_t10dif
crct10dif_common
ata_generic
ahci
libahci
pata_atiixp
ohci_pci
ohci_hcd
ehci_pci
ehci_hcd
tg3
libphy
e1000e
ptp
pps_core
usbcore
libata
scsi_mod
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge
[1022:9601]
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Hewlett-Packard Company Device [103c:9602] (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe500000-fe6fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe700000-fe7fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI
bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge
(PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01
[AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 7000 [size=16]
Region 5: Memory at fe4ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe4fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe4ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe4fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe4ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 42)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (rev 40) (prog-if 8a [Master SecP
PriP])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:16.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe4fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:16.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe4ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
RS880M [Mobility Radeon HD 4200 Series] [1002:9712] (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company Device [103c:1609]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at fe6f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe500000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: Intel Corporation Gigabit CT Desktop Adapter [8086:a01f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe7e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe700000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at d800 [size=32]
Region 3: Memory at fe7dc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fe780000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000e
03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: Intel Corporation Gigabit CT Desktop Adapter [8086:a01f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe800000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at e800 [size=32]
Region 3: Memory at fe8dc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fe880000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000e
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5723
Gigabit Ethernet PCIe [14e4:165b] (rev 10)
Subsystem: Hewlett-Packard Company NC107i Integrated PCI Express
Gigabit Server Adapter [103c:705d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.5
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.12-0.bpo.1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.12-0.bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.115~bpo70+1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.12-0.bpo.1-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.12-0.bpo.1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.12 <none>
Versions of packages linux-image-3.12-0.bpo.1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
