Package: src:linux Version: 3.2.57-3+deb7u1 Severity: important Dear Maintainer,
modules "usbip-core.ko" and "usbip-host.ko" (and possibly other usbip-related modules) are missing from the Debian kernel. As "usbip" itself is offered as a package, I believe the modules should be present. I suspect the modules' absence is due to the following line, extracted from /boot/config-3.2.0-4-kirkwood: > # CONFIG_USBIP_CORE is not set * What led up to the situation? $ apt-get install usbip $ sudo usbipd -D usbipd: error: please load usbip-core.ko and usbip-host.ko! $ sudo modprobe usbip-core FATAL: Module usbip-core not found. * What outcome did you expect instead? I expected the module(s) to load and, subsequently, usbip to work. -- Package-specific info: ** Version: Linux version 3.2.0-4-kirkwood (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.57-3 ** Command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816 ** Tainted: C (1024) * Module from drivers/staging has been loaded. ** Kernel log: [2070899.969390] Did not find alt setting 1 for intf 0, config 1 [2070945.026027] Did not find alt setting 1 for intf 0, config 1 [2070990.025258] Did not find alt setting 1 for intf 0, config 1 [2071035.024697] Did not find alt setting 1 for intf 0, config 1 [2071069.408365] Did not find alt setting 1 for intf 0, config 1 [2071071.422382] Did not find alt setting 1 for intf 0, config 1 [2071073.422756] Did not find alt setting 1 for intf 0, config 1 [2071075.423107] Did not find alt setting 1 for intf 0, config 1 [2071076.344966] usb 1-1.4.1: USB disconnect, device number 9 [2071087.587514] usb 1-1.4.1: new high-speed USB device number 10 using orion-ehci [2071087.708092] usb 1-1.4.1: New USB device found, idVendor=03f0, idProduct=5611 [2071087.715525] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [2071087.723284] usb 1-1.4.1: Product: Photosmart C3100 series [2071087.728926] usb 1-1.4.1: Manufacturer: HP [2071087.733130] usb 1-1.4.1: SerialNumber: CN738C300N04P9 [2071087.743934] usblp0: USB Bidirectional printer dev 10 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611 [2071087.766213] scsi7 : usb-storage 1-1.4.1:1.3 [2071088.784305] scsi 7:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2 [2071088.795830] sd 7:0:0:0: Attached scsi generic sg2 type 0 [2071088.805155] sd 7:0:0:0: [sdc] Attached SCSI removable disk [2071188.195281] usblp0: removed [2071188.199283] Did not find alt setting 1 for intf 0, config 1 [2071258.658264] Did not find alt setting 1 for intf 0, config 1 [2071303.657639] Did not find alt setting 1 for intf 0, config 1 [2071348.657189] Did not find alt setting 1 for intf 0, config 1 [2071393.657947] Did not find alt setting 1 for intf 0, config 1 [2071438.657431] Did not find alt setting 1 for intf 0, config 1 [2071483.657072] Did not find alt setting 1 for intf 0, config 1 [2071542.776966] usb 1-1.4.1: USB disconnect, device number 10 [2071555.812751] usb 1-1.4.1: new high-speed USB device number 11 using orion-ehci [2071555.923467] usb 1-1.4.1: New USB device found, idVendor=03f0, idProduct=5611 [2071555.930830] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [2071555.938571] usb 1-1.4.1: Product: Photosmart C3100 series [2071555.944246] usb 1-1.4.1: Manufacturer: HP [2071555.948446] usb 1-1.4.1: SerialNumber: CN738C300N04P9 [2071555.956686] usblp0: USB Bidirectional printer dev 11 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611 [2071556.037585] scsi8 : usb-storage 1-1.4.1:1.3 [2071557.035680] scsi 8:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2 [2071557.047034] sd 8:0:0:0: Attached scsi generic sg2 type 0 [2071557.055650] sd 8:0:0:0: [sdc] Attached SCSI removable disk [2071658.232967] usb 1-1.4.1: USB disconnect, device number 11 [2071658.239682] usblp0: removed [2071670.499250] usb 1-1.4.1: new high-speed USB device number 12 using orion-ehci [2071670.609866] usb 1-1.4.1: New USB device found, idVendor=03f0, idProduct=5611 [2071670.617130] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [2071670.624848] usb 1-1.4.1: Product: Photosmart C3100 series [2071670.630482] usb 1-1.4.1: Manufacturer: HP [2071670.634680] usb 1-1.4.1: SerialNumber: CN738C300N04P9 [2071670.662883] usblp0: USB Bidirectional printer dev 12 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5611 [2071670.715658] scsi9 : usb-storage 1-1.4.1:1.3 [2071671.719794] scsi 9:0:0:0: Direct-Access HP Photosmart C3180 1.00 PQ: 0 ANSI: 2 [2071671.733703] sd 9:0:0:0: Attached scsi generic sg2 type 0 [2071671.742153] sd 9:0:0:0: [sdc] Attached SCSI removable disk [2071902.710106] usblp0: removed [2071902.725344] Did not find alt setting 1 for intf 0, config 1 [2071956.944911] Did not find alt setting 1 for intf 0, config 1 [2072102.190400] Did not find alt setting 1 for intf 0, config 1 [2072155.218286] Did not find alt setting 1 for intf 0, config 1 [2072185.219128] Did not find alt setting 1 for intf 0, config 1 [2072270.254241] Did not find alt setting 1 for intf 0, config 1 [2072288.930411] Did not find alt setting 1 for intf 0, config 1 [2072349.377321] Did not find alt setting 1 for intf 0, config 1 [2073748.346142] Did not find alt setting 1 for intf 0, config 1 [2073822.225081] Did not find alt setting 1 for intf 0, config 1 [2074557.417154] Did not find alt setting 1 for intf 0, config 1 [2074557.417985] Did not find alt setting 1 for intf 0, config 1 [2074801.553679] Did not find alt setting 1 for intf 0, config 1 [2074819.645063] Did not find alt setting 1 for intf 0, config 1 [2074821.645406] Did not find alt setting 1 for intf 0, config 1 [2074823.645849] Did not find alt setting 1 for intf 0, config 1 [2074929.817791] Did not find alt setting 1 for intf 0, config 1 [2075117.011814] Did not find alt setting 1 for intf 0, config 1 [2075119.012238] Did not find alt setting 1 for intf 0, config 1 [2075121.012601] Did not find alt setting 1 for intf 0, config 1 [2075123.012977] Did not find alt setting 1 for intf 0, config 1 [2075125.013367] Did not find alt setting 1 for intf 0, config 1 [2075127.013761] Did not find alt setting 1 for intf 0, config 1 [2075351.288964] usb 1-1.4.1: USB disconnect, device number 12 [2499882.728614] usb 1-1.4.1: new high-speed USB device number 13 using orion-ehci [2499882.842088] usb 1-1.4.1: New USB device found, idVendor=04b8, idProduct=0122 [2499882.849359] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [2499882.857049] usb 1-1.4.1: Product: EPSON Scanner [2499882.861806] usb 1-1.4.1: Manufacturer: EPSON [2501472.922698] usb 1-1.4.1: usbfs: interface 0 claimed by usbfs while 'saned' sets config #1 [2502262.008968] usb 1-1.4.1: USB disconnect, device number 13 [2502274.533752] usb 1-1.4.1: new high-speed USB device number 14 using orion-ehci [2502274.647220] usb 1-1.4.1: New USB device found, idVendor=04b8, idProduct=0122 [2502274.654504] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [2502274.662197] usb 1-1.4.1: Product: EPSON Scanner [2502274.666959] usb 1-1.4.1: Manufacturer: EPSON [2503678.968969] usb 1-1.4.1: USB disconnect, device number 14 [2504217.832740] usb 1-1.4.1: new high-speed USB device number 15 using orion-ehci [2504217.956343] usb 1-1.4.1: New USB device found, idVendor=04b8, idProduct=0122 [2504217.963634] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [2504217.971328] usb 1-1.4.1: Product: EPSON Scanner [2504217.976087] usb 1-1.4.1: Manufacturer: EPSON [2504538.277319] usb 1-1.4.1: usbfs: interface 0 claimed by usbfs while 'scanimage' sets config #1 [2504669.988359] usb 1-1.4.1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 2 ret -110 [2504670.988303] usb 1-1.4.1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 2 ret -110 [2504748.792971] usb 1-1.4.1: USB disconnect, device number 15 ** Model information Processor : Feroceon 88FR131 rev 1 (v5l) Hardware : QNAP TS-119/TS-219 Revision : 0000 ** Loaded modules: usblp tun fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc bridge stp ipv6 aufs(C) loop dm_crypt sg snd_usb_audio snd_usbmidi_lib snd_hwdep snd_seq_midi snd_seq_midi_event snd_rawmidi usbhid snd_pcm snd_page_alloc snd_seq snd_seq_device snd_timer snd hid soundcore usb_storage hmac evdev mv643xx_eth sha1_generic inet_lro ehci_hcd libphy mv_cesa aes_generic usbcore usb_common gpio_keys ext4 mbcache jbd2 dm_mod sd_mod crc_t10dif sata_mv libata scsi_mod ** PCI devices: ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 003: ID 13fd:1840 Initio Corporation Shintaro SH23SDOCK Hard Drive Docker [INIC-1608L] Bus 001 Device 004: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 001 Device 005: ID 0d8c:000c C-Media Electronics, Inc. Audio Adapter -- System Information: Debian Release: 7.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: armel (armv5tel) Kernel: Linux 3.2.0-4-kirkwood Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-kirkwood depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-kirkwood recommends: ii firmware-linux-free 3.2 ii uboot-mkimage 2012.04.01-2 Versions of packages linux-image-3.2.0-4-kirkwood suggests: pn debian-kernel-handbook <none> pn fdutils <none> pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-kirkwood is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-kirkwood/prerm/removing-running-kernel-3.2.0-4-kirkwood: true linux-image-3.2.0-4-kirkwood/postinst/missing-firmware-3.2.0-4-kirkwood: linux-image-3.2.0-4-kirkwood/postinst/ignoring-ramdisk: linux-image-3.2.0-4-kirkwood/postinst/depmod-error-initrd-3.2.0-4-kirkwood: false -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
