Hi, On Wed, Jun 19, 2013 at 10:44:49AM +0200, Warpitaly wrote:
> I am trying to get wheezy running on a Dell R620 server (12th generation). HP DL380p G8 here. > Using wheezy everything is working nicely, except for a Broadcom 10Gbit > network adapter (BCM57810). That very same NIC. More detailed dmesg output: [ 5.323395] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25) [ 5.323514] bnx2x 0000:07:00.0: setting latency timer to 64 [ 5.324162] bnx2x 0000:07:00.0: part number 0-0-0-0 [ 5.324246] ------------[ cut here ]------------ [ 5.324259] WARNING: at /build/linux-FpPMO6/linux-3.2.54/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:8886 bnx2x_init_one+0xdc8/0x2b5d [bnx2x]() [ 5.324261] Hardware name: ProLiant DL380p Gen8 [ 5.324262] Modules linked in: bnx2x(+) usb_common scsi_mod thermal mdio thermal_sys crc32c tg3(+) libphy libcrc32c [ 5.324269] Pid: 4, comm: kworker/0:0 Tainted: G W 3.2.0-4-amd64 #1 Debian 3.2.54-2 [ 5.324270] Call Trace: [ 5.324278] [<ffffffff81046cb5>] ? warn_slowpath_common+0x78/0x8c [ 5.324287] [<ffffffffa015155d>] ? bnx2x_init_one+0xdc8/0x2b5d [bnx2x] [ 5.324291] [<ffffffff81259c02>] ? __pm_runtime_set_status+0x118/0x13c [ 5.324296] [<ffffffff811c68ff>] ? local_pci_probe+0x39/0x68 [ 5.324299] [<ffffffff81059f52>] ? work_for_cpu_fn+0xb/0x11 [ 5.324303] [<ffffffff8105b579>] ? process_one_work+0x161/0x269 [ 5.324305] [<ffffffff8105b69a>] ? process_scheduled_works+0x19/0x27 [ 5.324307] [<ffffffff8105c55c>] ? worker_thread+0xdc/0x145 [ 5.324310] [<ffffffff8105c480>] ? manage_workers.isra.25+0x15b/0x15b [ 5.324313] [<ffffffff8105f681>] ? kthread+0x76/0x7e [ 5.324317] [<ffffffff81356ef4>] ? kernel_thread_helper+0x4/0x10 [ 5.324320] [<ffffffff8105f60b>] ? kthread_worker_fn+0x139/0x139 [ 5.324323] [<ffffffff81356ef0>] ? gs_change+0x13/0x13 [ 5.324324] ---[ end trace 938221127a050ff9 ]--- [ 5.330257] bnx2x 0000:07:00.0: irq 90 for MSI/MSI-X [ 5.330265] bnx2x 0000:07:00.0: irq 91 for MSI/MSI-X [ 5.330273] bnx2x 0000:07:00.0: irq 92 for MSI/MSI-X [ 5.330280] bnx2x 0000:07:00.0: irq 93 for MSI/MSI-X [ 5.330287] bnx2x 0000:07:00.0: irq 94 for MSI/MSI-X [ 5.330295] bnx2x 0000:07:00.0: irq 95 for MSI/MSI-X [ 5.330302] bnx2x 0000:07:00.0: irq 96 for MSI/MSI-X [ 5.330309] bnx2x 0000:07:00.0: irq 97 for MSI/MSI-X [ 5.330316] bnx2x 0000:07:00.0: irq 98 for MSI/MSI-X [ 5.330323] bnx2x 0000:07:00.0: irq 99 for MSI/MSI-X [ 5.330330] bnx2x 0000:07:00.0: irq 100 for MSI/MSI-X [ 5.330338] bnx2x 0000:07:00.0: irq 101 for MSI/MSI-X [ 5.330345] bnx2x 0000:07:00.0: irq 102 for MSI/MSI-X [ 5.330352] bnx2x 0000:07:00.0: irq 103 for MSI/MSI-X [ 5.330366] bnx2x 0000:07:00.0: irq 104 for MSI/MSI-X [ 5.330373] bnx2x 0000:07:00.0: irq 105 for MSI/MSI-X [ 5.330379] bnx2x 0000:07:00.0: irq 106 for MSI/MSI-X [ 5.331820] bnx2x 0000:07:00.0: eth0: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem f6000000, IRQ 26, node addr 2c:44:fd:90:ca:a8 [ 5.339840] bnx2x 0000:07:00.1: setting latency timer to 64 [ 5.340573] bnx2x 0000:07:00.1: part number 0-0-0-0 [ 5.340656] ------------[ cut here ]------------ [ 5.340668] WARNING: at /build/linux-FpPMO6/linux-3.2.54/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:8886 bnx2x_init_one+0xdc8/0x2b5d [bnx2x]() [ 5.340670] Hardware name: ProLiant DL380p Gen8 [ 5.340670] Modules linked in: ata_piix(+) libata ehci_hcd(+) usbcore bnx2x(+) usb_common scsi_mod thermal mdio thermal_sys crc32c tg3(+) libphy libcrc32c [ 5.340678] Pid: 11, comm: kworker/0:1 Tainted: G W 3.2.0-4-amd64 #1 Debian 3.2.54-2 [ 5.340680] Call Trace: [ 5.340684] [<ffffffff81046cb5>] ? warn_slowpath_common+0x78/0x8c [ 5.340692] [<ffffffffa015155d>] ? bnx2x_init_one+0xdc8/0x2b5d [bnx2x] [ 5.340696] [<ffffffff8134fdc7>] ? _raw_spin_unlock_irqrestore+0xe/0xf [ 5.340699] [<ffffffff81259c02>] ? __pm_runtime_set_status+0x118/0x13c [ 5.340702] [<ffffffff811c68ff>] ? local_pci_probe+0x39/0x68 [ 5.340705] [<ffffffff81059f52>] ? work_for_cpu_fn+0xb/0x11 [ 5.340707] [<ffffffff8105b579>] ? process_one_work+0x161/0x269 [ 5.340709] [<ffffffff8105b69a>] ? process_scheduled_works+0x19/0x27 [ 5.340712] [<ffffffff8105c55c>] ? worker_thread+0xdc/0x145 [ 5.340714] [<ffffffff8105c480>] ? manage_workers.isra.25+0x15b/0x15b [ 5.340717] [<ffffffff8105f681>] ? kthread+0x76/0x7e [ 5.340719] [<ffffffff81356ef4>] ? kernel_thread_helper+0x4/0x10 [ 5.340722] [<ffffffff8105f60b>] ? kthread_worker_fn+0x139/0x139 [ 5.340725] [<ffffffff81356ef0>] ? gs_change+0x13/0x13 [ 5.340726] ---[ end trace 938221127a050ffa ]--- [ 5.346637] bnx2x 0000:07:00.1: irq 107 for MSI/MSI-X [ 5.346644] bnx2x 0000:07:00.1: irq 108 for MSI/MSI-X [ 5.346651] bnx2x 0000:07:00.1: irq 109 for MSI/MSI-X [ 5.346657] bnx2x 0000:07:00.1: irq 110 for MSI/MSI-X [ 5.346665] bnx2x 0000:07:00.1: irq 111 for MSI/MSI-X [ 5.346680] bnx2x 0000:07:00.1: irq 112 for MSI/MSI-X [ 5.346687] bnx2x 0000:07:00.1: irq 113 for MSI/MSI-X [ 5.346693] bnx2x 0000:07:00.1: irq 114 for MSI/MSI-X [ 5.346699] bnx2x 0000:07:00.1: irq 115 for MSI/MSI-X [ 5.346706] bnx2x 0000:07:00.1: irq 116 for MSI/MSI-X [ 5.346713] bnx2x 0000:07:00.1: irq 117 for MSI/MSI-X [ 5.346719] bnx2x 0000:07:00.1: irq 118 for MSI/MSI-X [ 5.346725] bnx2x 0000:07:00.1: irq 119 for MSI/MSI-X [ 5.346732] bnx2x 0000:07:00.1: irq 120 for MSI/MSI-X [ 5.346738] bnx2x 0000:07:00.1: irq 121 for MSI/MSI-X [ 5.346745] bnx2x 0000:07:00.1: irq 122 for MSI/MSI-X [ 5.346751] bnx2x 0000:07:00.1: irq 123 for MSI/MSI-X [ 5.347341] bnx2x 0000:07:00.1: eth1: Broadcom NetXtreme II BCM57810 10 Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem f4800000, IRQ 28, node addr 2c:44:fd:90:ca:ac [ 10.993871] bnx2x 0000:07:00.0: firmware: agent loaded bnx2x/bnx2x-e2-7.0.29.0.fw into memory [ 11.562707] bnx2x 0000:07:00.0: eth0: using MSI-X IRQs: sp 90 fp[0] 92 ... fp[14] 106 [ 11.959904] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 389.083555] bnx2x 0000:07:00.1: firmware: agent loaded bnx2x/bnx2x-e2-7.0.29.0.fw into memory [ 389.588877] bnx2x 0000:07:00.1: eth1: using MSI-X IRQs: sp 107 fp[0] 109 ... fp[14] 123 [ 390.073819] ADDRCONF(NETDEV_UP): eth1: link is not ready ethtool reports "Link detected: no". Using 3.13 from bpo works, but I'd prefer a "stable" kernel :) Regards Evgeni -- Bruce Schneier can read and understand Perl programs. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
