-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Package: ifupdown
Version: 0.7.8
Does anyone know when the fixed ifupdown package (0.7.48.1?) will be
available in wheezy-backports?
I have the same issue with using vlans and ucarp:
root@test:~# ifquery -l -v
lo
eth2.40
eth2.10
eth3.90
root@test:~# ifquery -v eth2.40
Querying interface eth2.40=eth2.40 (inet)
address: 10.1.40.252
network: 10.1.40.0
netmask: 255.255.255.0
broadcast: 10.1.40.255
vlan-raw-device: eth2
ucarp-vid: 40
ucarp-vip: 10.1.40.254
ucarp-password: secretpassword
ucarp-advskew: 10
ucarp-master: yes
root@test:~# ifquery -v eth2.40:ucarp
Querying interface eth2.40:ucarp=eth2.40:ucarp (inet)
address: 10.1.40.254
netmask: 255.255.255.255
broadcast: 10.1.40.254
root@test:~# ip addr show eth2.40
6: eth2.40@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP link/ether 90:e2:ba:64:f3:60 brd ff:ff:ff:ff:ff:ff
inet 10.1.40.252/24 brd 10.1.40.255 scope global eth2.40
inet 10.1.40.254/32 brd 10.1.40.254 scope global eth2.40:ucarp
inet6 fe80::92e2:baff:fe64:f360/64 scope link
valid_lft forever preferred_lft forever
root@test:~# ifdown -v eth2.40:ucarp
Configuring interface eth2.40:ucarp=eth2.40:ucarp (inet)
run-parts --verbose /etc/network/if-down.d
run-parts: executing /etc/network/if-down.d/sendmail
run-parts: executing /etc/network/if-down.d/upstart
ip -4 addr flush dev eth2.40:ucarp label eth2.40:ucarp
run-parts --verbose /etc/network/if-post-down.d
run-parts: executing /etc/network/if-post-down.d/sendmail
run-parts: executing /etc/network/if-post-down.d/vlan
ip link del eth2.40:ucarp
root@test:~# ip addr show eth2.40
Device "eth2.40" does not exist.
Thanks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEARECAAYFAlNNCrMACgkQygVt8Sq0Pf9xigCgiVKbfGOiFQ88C7gf3zq7oTG/
1YQAn0SMiwEZPxb+s68dYU+4x5dS8jCd
=94pQ
-----END PGP SIGNATURE-----
