Package: libasound2-plugins Version: 1.0.27-2+b1 Severity: normal Dear Maintainer,
I setup pulseaudio as described in the README-pulse file: rd@blackbox:~$ cat /etc/asound.conf # from http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/PerfectSetup/ pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse # If defaults.namehint.showall is set to off in alsa.conf, then this is # necessary to make this pcm show up in the list returned by # snd_device_name_hint or aplay -L hint.description "Default Audio Device" } ctl.!default { type pulse }rd@blackbox:~$ and the both devices the Intel sound card and the USB headset are listed by aplay: rd@blackbox:~$ aplay -L null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default Playback/recording through the PulseAudio sound server sysdefault:CARD=Headset Logitech USB Headset, USB Audio Default Audio Device front:CARD=Headset,DEV=0 Logitech USB Headset, USB Audio Front speakers surround40:CARD=Headset,DEV=0 Logitech USB Headset, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Headset,DEV=0 Logitech USB Headset, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Headset,DEV=0 Logitech USB Headset, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Headset,DEV=0 Logitech USB Headset, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Headset,DEV=0 Logitech USB Headset, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers sysdefault:CARD=Intel HDA Intel, ALC883 Analog Default Audio Device front:CARD=Intel,DEV=0 HDA Intel, ALC883 Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC883 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC883 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC883 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC883 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC883 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC883 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=Intel,DEV=0 HDA Intel, HDMI 0 HDMI Audio Output rd@blackbox:~$ Pulseaudio is configured to play on the USB headset. This is verified with amarok or miro etc.. Unfortunately I do not know which pulseaudio cmd use to dump that information, therefore I append a complete pulseaudio dump: rd@blackbox:~$ pacmd info Welcome to PulseAudio! Use "help" for usage information. >>> Memory blocks currently allocated: 283, size: 1,2 MB. Memory blocks allocated during the whole lifetime: 42842, size: 142,0 MB. Memory blocks imported from other processes: 242, size: 911,3 KB. Memory blocks exported to other processes: 0, size: 0 B. Total sample cache size: 0 B. Default sample spec: s16le 2ch 44100Hz Default channel map: front-left,front-right Default sink name: alsa_output.pci-0000_00_1b.0.analog-stereo Default source name: alsa_input.pci-0000_00_1b.0.analog-stereo Memory blocks of type POOL: 41 allocated/3686 accumulated. Memory blocks of type POOL_EXTERNAL: 0 allocated/0 accumulated. Memory blocks of type APPENDED: 0 allocated/0 accumulated. Memory blocks of type USER: 0 allocated/0 accumulated. Memory blocks of type FIXED: 0 allocated/25801 accumulated. Memory blocks of type IMPORTED: 242 allocated/13355 accumulated. 27 module(s) loaded. index: 0 name: <module-device-restore> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "4.0" index: 1 name: <module-stream-restore> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "4.0" index: 2 name: <module-card-restore> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "4.0" index: 3 name: <module-augment-properties> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "4.0" index: 4 name: <module-switch-on-port-available> argument: <> used: -1 load once: no properties: index: 5 name: <module-alsa-card> argument: <device_id="1" name="usb-Logitech_Logitech_USB_Headset-00-Headset" card_name="alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"> used: 2 load once: no properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "4.0" index: 7 name: <module-alsa-card> argument: <device_id="2" name="pci-0000_00_1b.0" card_name="alsa_card.pci-0000_00_1b.0" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"> used: 0 load once: no properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "4.0" index: 8 name: <module-udev-detect> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "4.0" index: 9 name: <module-native-protocol-unix> argument: <> used: -1 load once: no properties: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "4.0" index: 10 name: <module-default-device-restore> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "4.0" index: 11 name: <module-rescue-streams> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move their streams to the default sink/source" module.version = "4.0" index: 12 name: <module-always-sink> argument: <> used: -1 load once: yes properties: module.author = "Colin Guthrie" module.description = "Hält stets einen Sink geladen, selbst wenn dies ein Null-Sink ist" module.version = "4.0" index: 13 name: <module-intended-roles> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based of intended roles of devices" module.version = "4.0" index: 14 name: <module-suspend-on-idle> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "4.0" index: 15 name: <module-console-kit> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Create a client for each ConsoleKit session of this user" module.version = "4.0" index: 16 name: <module-systemd-login> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "4.0" index: 17 name: <module-position-event-sounds> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "4.0" index: 18 name: <module-role-cork> argument: <> used: -1 load once: yes properties: module.author = "Lennart Poettering" module.description = "Mute & cork streams with certain roles while others exist" module.version = "4.0" index: 19 name: <module-filter-heuristics> argument: <> used: -1 load once: yes properties: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "4.0" index: 20 name: <module-filter-apply> argument: <> used: -1 load once: yes properties: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "4.0" index: 21 name: <module-dbus-protocol> argument: <> used: -1 load once: yes properties: module.author = "Tanu Kaskinen" module.description = "D-Bus interface" module.version = "4.0" index: 22 name: <module-x11-publish> argument: <display=:0> used: -1 load once: no properties: module.author = "Lennart Poettering" module.description = "X11 credential publisher" module.version = "4.0" index: 23 name: <module-x11-cork-request> argument: <display=:0> used: -1 load once: no properties: module.author = "Lennart Poettering" module.description = "Synthesize X11 media key events when cork/uncork is requested" module.version = "4.0" index: 24 name: <module-device-manager> argument: <do_routing=1> used: -1 load once: yes properties: module.author = "Colin Guthrie" module.description = "Keep track of devices (and their descriptions) both past and present and prioritise by role" module.version = "4.0" index: 25 name: <module-x11-xsmp> argument: <display=:0 session_manager=local/blackbox:@/tmp/.ICE-unix/4218,unix/blackbox:/tmp/.ICE-unix/4218> used: -1 load once: no properties: module.author = "Lennart Poettering" module.description = "X11 session management" module.version = "4.0" index: 28 name: <module-alsa-card> argument: <device_id="0" name="usb-046d_0825_603B4F50-02-U0x46d0x825" card_name="alsa_card.usb-046d_0825_603B4F50-02-U0x46d0x825" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"> used: 0 load once: no properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "4.0" index: 29 name: <module-cli-protocol-unix> argument: <> used: -1 load once: no properties: module.author = "Lennart Poettering" module.description = "Command line interface protocol (UNIX sockets)" module.version = "4.0" 2 sink(s) available. index: 0 name: <alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9049 volume: 0: 100% 1: 100% 0: 0,00 dB 1: 0,00 dB balance 0,00 base volume: 100% 0,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 0 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 2 configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms card: 0 <alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset> module: 5 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "USB Audio" alsa.id = "USB Audio" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "1" alsa.card_name = "Logitech USB Headset" alsa.long_card_name = "Logitech Logitech USB Headset at usb-0000:00:1a.7-5.3, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1a.7-usb-0:5.3:1.0" sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb4/4-5/4-5.3/4-5.3:1.0/sound/card1" udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset" device.bus = "usb" device.vendor.id = "046d" device.vendor.name = "Logitech, Inc." device.product.id = "0a44" device.product.name = "Logitech USB Headset" device.serial = "Logitech_Logitech_USB_Headset" device.form_factor = "headset" device.string = "front:1" device.buffering.buffer_size = "352800" device.buffering.fragment_size = "176400" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Logitech USB Headset Analog Stereo" alsa.mixer_name = "USB Mixer" alsa.components = "USB046d:0a44" module-udev-detect.discovered = "1" device.icon_name = "audio-headset-usb" device.intended_roles = "phone" ports: analog-output-headphones: Analoge Kopfhörer (priority 9000, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-headphones" active port: <analog-output-headphones> * index: 1 name: <alsa_output.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9959 volume: 0: 100% 1: 100% 0: 0,00 dB 1: 0,00 dB balance 0,00 base volume: 100% 0,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max request: 0 KiB max rewind: 0 KiB monitor source: 3 sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 371,52 ms card: 2 <alsa_card.pci-0000_00_1b.0> module: 7 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC883 Analog" alsa.id = "ALC883 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "2" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xfe7f4000 irq 45" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "293e" device.product.name = "P5K PRO Motherboard" device.form_factor = "internal" device.string = "front:2" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Internes Audio Analog Stereo" alsa.mixer_name = "Silicon Image SiI1392 HDMI" alsa.components = "HDA:10ec0883,1043829f,00100002 HDA:10951392,ffffffff,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-output: Analoge Ausgabe (priority 9900, latency offset 0 usec, available: unknown) properties: analog-output-headphones: Analoge Kopfhörer (priority 9000, latency offset 0 usec, available: no) properties: device.icon_name = "audio-headphones" active port: <analog-output> 5 source(s) available. index: 0 name: <alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo.monitor> driver: <module-alsa-card.c> flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 1040 volume: 0: 100% 1: 100% 0: 0,00 dB 1: 0,00 dB balance 0,00 base volume: 100% 0,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max rewind: 0 KiB sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms monitor_of: 0 card: 0 <alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset> module: 5 properties: device.description = "Monitor of Logitech USB Headset Analog Stereo" device.class = "monitor" alsa.card = "1" alsa.card_name = "Logitech USB Headset" alsa.long_card_name = "Logitech Logitech USB Headset at usb-0000:00:1a.7-5.3, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1a.7-usb-0:5.3:1.0" sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb4/4-5/4-5.3/4-5.3:1.0/sound/card1" udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset" device.bus = "usb" device.vendor.id = "046d" device.vendor.name = "Logitech, Inc." device.product.id = "0a44" device.product.name = "Logitech USB Headset" device.serial = "Logitech_Logitech_USB_Headset" device.form_factor = "headset" device.string = "1" module-udev-detect.discovered = "1" device.icon_name = "audio-headset-usb" device.intended_roles = "phone" index: 1 name: <alsa_input.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-mono> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9049 volume: 0: 100% 0: 0,00 dB balance 0,00 base volume: 33% -29,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max rewind: 0 KiB sample spec: s16le 1ch 44100Hz channel map: mono Mono used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms card: 0 <alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset> module: 5 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "USB Audio" alsa.id = "USB Audio" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "1" alsa.card_name = "Logitech USB Headset" alsa.long_card_name = "Logitech Logitech USB Headset at usb-0000:00:1a.7-5.3, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1a.7-usb-0:5.3:1.0" sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb4/4-5/4-5.3/4-5.3:1.0/sound/card1" udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset" device.bus = "usb" device.vendor.id = "046d" device.vendor.name = "Logitech, Inc." device.product.id = "0a44" device.product.name = "Logitech USB Headset" device.serial = "Logitech_Logitech_USB_Headset" device.form_factor = "headset" device.string = "hw:1" device.buffering.buffer_size = "176400" device.buffering.fragment_size = "88200" device.access_mode = "mmap+timer" device.profile.name = "analog-mono" device.profile.description = "Analog Mono" device.description = "Logitech USB Headset Analog Mono" alsa.mixer_name = "USB Mixer" alsa.components = "USB046d:0a44" module-udev-detect.discovered = "1" device.icon_name = "audio-headset-usb" device.intended_roles = "phone" ports: analog-input-microphone: Mikrofon (priority 8700, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-input-microphone" active port: <analog-input-microphone> index: 3 name: <alsa_output.pci-0000_00_1b.0.analog-stereo.monitor> driver: <module-alsa-card.c> flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 1950 volume: 0: 100% 1: 100% 0: 0,00 dB 1: 0,00 dB balance 0,00 base volume: 100% 0,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max rewind: 0 KiB sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 371,52 ms monitor_of: 1 card: 2 <alsa_card.pci-0000_00_1b.0> module: 7 properties: device.description = "Monitor of Internes Audio Analog Stereo" device.class = "monitor" alsa.card = "2" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xfe7f4000 irq 45" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "293e" device.product.name = "P5K PRO Motherboard" device.form_factor = "internal" device.string = "2" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" * index: 4 name: <alsa_input.pci-0000_00_1b.0.analog-stereo> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9959 volume: 0: 5% 1: 5% 0: -76,50 dB 1: -76,50 dB balance 0,00 base volume: 8% -64,50 dB volume steps: 65537 muted: yes current latency: 0,00 ms max rewind: 0 KiB sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 371,52 ms card: 2 <alsa_card.pci-0000_00_1b.0> module: 7 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "ALC883 Analog" alsa.id = "ALC883 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "2" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xfe7f4000 irq 45" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "293e" device.product.name = "P5K PRO Motherboard" device.form_factor = "internal" device.string = "front:2" device.buffering.buffer_size = "65536" device.buffering.fragment_size = "32768" device.access_mode = "mmap+timer" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Internes Audio Analog Stereo" alsa.mixer_name = "Silicon Image SiI1392 HDMI" alsa.components = "HDA:10ec0883,1043829f,00100002 HDA:10951392,ffffffff,00100000" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" ports: analog-input-microphone-front: Front Microphone (priority 8500, latency offset 0 usec, available: no) properties: device.icon_name = "audio-input-microphone" analog-input-microphone-rear: Rear Microphone (priority 8200, latency offset 0 usec, available: no) properties: device.icon_name = "audio-input-microphone" analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no) properties: active port: <analog-input-linein> index: 7 name: <alsa_input.usb-046d_0825_603B4F50-02-U0x46d0x825.analog-mono> driver: <module-alsa-card.c> flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY state: SUSPENDED suspend cause: IDLE priority: 9049 volume: 0: 40% 0: -24,00 dB balance 0,00 base volume: 32% -30,00 dB volume steps: 65537 muted: no current latency: 0,00 ms max rewind: 0 KiB sample spec: s16le 1ch 48000Hz channel map: mono Mono used by: 0 linked by: 0 configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms card: 5 <alsa_card.usb-046d_0825_603B4F50-02-U0x46d0x825> module: 28 properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "USB Audio" alsa.id = "USB Audio" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "0" alsa.card_name = "USB Device 0x46d:0x825" alsa.long_card_name = "USB Device 0x46d:0x825 at usb-0000:00:1a.7-5.4, high speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1a.7-usb-0:5.4:1.2" sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb4/4-5/4-5.4/4-5.4:1.2/sound/card0" udev.id = "usb-046d_0825_603B4F50-02-U0x46d0x825" device.bus = "usb" device.vendor.id = "046d" device.vendor.name = "Logitech, Inc." device.product.id = "0825" device.product.name = "Webcam C270" device.serial = "046d_0825_603B4F50" device.form_factor = "webcam" device.string = "hw:0" device.buffering.buffer_size = "192000" device.buffering.fragment_size = "96000" device.access_mode = "mmap+timer" device.profile.name = "analog-mono" device.profile.description = "Analog Mono" device.description = "Webcam C270 Analog Mono" alsa.mixer_name = "USB Mixer" alsa.components = "USB046d:0825" module-udev-detect.discovered = "1" device.icon_name = "camera-web-usb" ports: analog-input-microphone: Mikrofon (priority 8700, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-input-microphone" active port: <analog-input-microphone> 10 client(s) logged in. index: 0 driver: <module-console-kit.c> owner module: 15 properties: application.name = "ConsoleKit Session /org/freedesktop/ConsoleKit/Session1" console-kit.session = "/org/freedesktop/ConsoleKit/Session1" index: 4 driver: <protocol-native.c> owner module: 9 properties: application.name = "KMix" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "4575" application.process.user = "rd" application.process.host = "blackbox" application.process.binary = "kmix" application.language = "de_DE.UTF-8" window.x11.display = ":0" application.process.machine_id = "75984896964f32f441429b004775830e" application.icon_name = "kmix" index: 6 driver: <protocol-native.c> owner module: 9 properties: application.name = "Amarok" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.version = "2.8.0" application.icon_name = "amarok" application.process.id = "4693" application.process.user = "rd" application.process.host = "blackbox" application.process.binary = "amarok" application.language = "de_DE.UTF-8" window.x11.display = ":0" application.process.machine_id = "75984896964f32f441429b004775830e" index: 9 driver: <protocol-native.c> owner module: 9 properties: application.name = "Amarok" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.version = "2.8.0" application.icon_name = "amarok" application.process.id = "4693" application.process.user = "rd" application.process.host = "blackbox" application.process.binary = "amarok" application.language = "de_DE.UTF-8" window.x11.display = ":0" application.process.machine_id = "75984896964f32f441429b004775830e" index: 11 driver: <protocol-native.c> owner module: 9 properties: application.name = "KMix" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "4131" application.process.user = "rd" application.process.host = "blackbox" application.process.binary = "kdeinit4" application.language = "de_DE.UTF-8" window.x11.display = ":0" application.process.machine_id = "75984896964f32f441429b004775830e" index: 16 driver: <module-x11-xsmp.c> owner module: 25 properties: application.name = "XSMP Session on KDE as 10cdced0db000139556925200000042180035" xsmp.vendor = "KDE" xsmp.client.id = "10cdced0db000139556925200000042180035" index: 18 driver: <protocol-native.c> owner module: 9 properties: application.name = "KNotify" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.icon_name = "knotify" application.process.id = "5288" application.process.user = "rd" application.process.host = "blackbox" application.process.binary = "knotify4" application.language = "de_DE.UTF-8" window.x11.display = ":0" application.process.machine_id = "75984896964f32f441429b004775830e" index: 27 driver: <protocol-native.c> owner module: 9 properties: application.name = "libphonon" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.process.id = "4131" application.process.user = "rd" application.process.host = "blackbox" application.process.binary = "kdeinit4" application.language = "de_DE.UTF-8" window.x11.display = ":0" application.process.machine_id = "75984896964f32f441429b004775830e" index: 50 driver: <protocol-native.c> owner module: 9 properties: application.name = "Miro" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" media.role = "video" application.process.id = "30134" application.process.user = "rd" application.process.host = "blackbox" application.process.binary = "python2.7" application.language = "de_DE.UTF-8" window.x11.display = ":0" application.process.machine_id = "75984896964f32f441429b004775830e" application.icon_name = "/usr/share/pixmaps/python2.7.xpm" index: 79 driver: <cli.c> owner module: 29 properties: application.name = "UNIX socket client" 3 card(s) available. index: 0 name: <alsa_card.usb-Logitech_Logitech_USB_Headset-00-Headset> driver: <module-alsa-card.c> owner module: 5 properties: alsa.card = "1" alsa.card_name = "Logitech USB Headset" alsa.long_card_name = "Logitech Logitech USB Headset at usb-0000:00:1a.7-5.3, full speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1a.7-usb-0:5.3:1.0" sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb4/4-5/4-5.3/4-5.3:1.0/sound/card1" udev.id = "usb-Logitech_Logitech_USB_Headset-00-Headset" device.bus = "usb" device.vendor.id = "046d" device.vendor.name = "Logitech, Inc." device.product.id = "0a44" device.product.name = "Logitech USB Headset" device.serial = "Logitech_Logitech_USB_Headset" device.form_factor = "headset" device.string = "1" device.description = "Logitech USB Headset" module-udev-detect.discovered = "1" device.icon_name = "audio-headset-usb" device.intended_roles = "phone" profiles: input:analog-mono: Analog Mono Input (priority 1, available: unknown) output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown) output:analog-stereo+input:analog-mono: Analog Stereo Output + Analog Mono Input (priority 6001, available: unknown) off: Aus (priority 0, available: unknown) active profile: <output:analog-stereo+input:analog-mono> sinks: alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo/#0: Logitech USB Headset Analog Stereo sources: alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo.monitor/#0: Monitor of Logitech USB Headset Analog Stereo alsa_input.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-mono/#1: Logitech USB Headset Analog Mono ports: analog-input-microphone: Mikrofon (priority 8700, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-input-microphone" analog-output-headphones: Analoge Kopfhörer (priority 9000, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-headphones" index: 2 name: <alsa_card.pci-0000_00_1b.0> driver: <module-alsa-card.c> owner module: 7 properties: alsa.card = "2" alsa.card_name = "HDA Intel" alsa.long_card_name = "HDA Intel at 0xfe7f4000 irq 45" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:1b.0" sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2" device.bus = "pci" device.vendor.id = "8086" device.vendor.name = "Intel Corporation" device.product.id = "293e" device.product.name = "P5K PRO Motherboard" device.form_factor = "internal" device.string = "2" device.description = "Internes Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" profiles: input:analog-stereo: Analog Stereo Input (priority 60, available: unknown) output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown) output:analog-surround-40: Analog Surround 4.0 Output (priority 700, available: unknown) output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 760, available: unknown) output:analog-surround-41: Analog Surround 4.1 Output (priority 800, available: unknown) output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 860, available: unknown) output:analog-surround-50: Analog Surround 5.0 Output (priority 700, available: unknown) output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 760, available: unknown) output:analog-surround-51: Analog Surround 5.1 Output (priority 800, available: unknown) output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 860, available: unknown) output:analog-surround-71: Analog Surround 7.1 Output (priority 700, available: unknown) output:analog-surround-71+input:analog-stereo: Analog Surround 7.1 Output + Analog Stereo Input (priority 760, available: unknown) output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown) output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560, available: unknown) output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown) output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5460, available: unknown) output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown) output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 360, available: unknown) off: Aus (priority 0, available: unknown) active profile: <output:analog-stereo+input:analog-stereo> sinks: alsa_output.pci-0000_00_1b.0.analog-stereo/#1: Internes Audio Analog Stereo sources: alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#3: Monitor of Internes Audio Analog Stereo alsa_input.pci-0000_00_1b.0.analog-stereo/#4: Internes Audio Analog Stereo ports: analog-input-microphone-front: Front Microphone (priority 8500, latency offset 0 usec, available: no) properties: device.icon_name = "audio-input-microphone" analog-input-microphone-rear: Rear Microphone (priority 8200, latency offset 0 usec, available: no) properties: device.icon_name = "audio-input-microphone" analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no) properties: analog-output: Analoge Ausgabe (priority 9900, latency offset 0 usec, available: unknown) properties: analog-output-headphones: Analoge Kopfhörer (priority 9000, latency offset 0 usec, available: no) properties: device.icon_name = "audio-headphones" iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown) properties: hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no) properties: device.icon_name = "video-display" index: 5 name: <alsa_card.usb-046d_0825_603B4F50-02-U0x46d0x825> driver: <module-alsa-card.c> owner module: 28 properties: alsa.card = "0" alsa.card_name = "USB Device 0x46d:0x825" alsa.long_card_name = "USB Device 0x46d:0x825 at usb-0000:00:1a.7-5.4, high speed" alsa.driver_name = "snd_usb_audio" device.bus_path = "pci-0000:00:1a.7-usb-0:5.4:1.2" sysfs.path = "/devices/pci0000:00/0000:00:1a.7/usb4/4-5/4-5.4/4-5.4:1.2/sound/card0" udev.id = "usb-046d_0825_603B4F50-02-U0x46d0x825" device.bus = "usb" device.vendor.id = "046d" device.vendor.name = "Logitech, Inc." device.product.id = "0825" device.product.name = "Webcam C270" device.serial = "046d_0825_603B4F50" device.form_factor = "webcam" device.string = "0" device.description = "Webcam C270" module-udev-detect.discovered = "1" device.icon_name = "camera-web-usb" profiles: input:analog-mono: Analog Mono Input (priority 1, available: unknown) off: Aus (priority 0, available: unknown) active profile: <input:analog-mono> sources: alsa_input.usb-046d_0825_603B4F50-02-U0x46d0x825.analog-mono/#7: Webcam C270 Analog Mono ports: analog-input-microphone: Mikrofon (priority 8700, latency offset 0 usec, available: unknown) properties: device.icon_name = "audio-input-microphone" 2 sink input(s) available. index: 32 driver: <protocol-native.c> flags: START_CORKED state: CORKED sink: 0 <alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo> volume: 0: 61% 1: 61% 0: -12,88 dB 1: -12,88 dB balance 0,00 muted: no current latency: 154,78 ms requested latency: 90,00 ms sample spec: float32le 2ch 44100Hz channel map: front-left,front-right Stereo resample method: copy module: 9 client: 9 <Amarok> properties: phonon.streamid = "{75421b7c-aa47-4f50-9267-36616e88e0ef}" media.role = "music" media.name = "»1,2,3 im Sauseschritt« durch »Diverse«" application.name = "Amarok" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" application.version = "2.8.0" application.icon_name = "amarok" application.process.id = "4693" application.process.user = "rd" application.process.host = "blackbox" application.process.binary = "amarok" application.language = "de_DE.UTF-8" window.x11.display = ":0" application.process.machine_id = "75984896964f32f441429b004775830e" module-stream-restore.id = "sink-input-by-media-role:music" media.title = "1,2,3 im Sauseschritt" media.artist = "Diverse" index: 35 driver: <protocol-native.c> flags: START_CORKED state: CORKED sink: 0 <alsa_output.usb-Logitech_Logitech_USB_Headset-00-Headset.analog-stereo> volume: 0: 69% 1: 69% 0: -9,68 dB 1: -9,68 dB balance 0,00 muted: no current latency: 138,55 ms requested latency: 90,00 ms sample spec: s16le 2ch 44100Hz channel map: front-left,front-right Stereo resample method: (null) module: 9 client: 50 <Miro> properties: media.name = "Playback Stream" application.name = "Miro" native-protocol.peer = "UNIX socket client" native-protocol.version = "28" media.role = "video" application.process.id = "30134" application.process.user = "rd" application.process.host = "blackbox" application.process.binary = "python2.7" application.language = "de_DE.UTF-8" window.x11.display = ":0" application.process.machine_id = "75984896964f32f441429b004775830e" application.icon_name = "/usr/share/pixmaps/python2.7.xpm" module-stream-restore.id = "sink-input-by-media-role:video" 0 source outputs(s) available. 0 cache entrie(s) available. >>> rd@blackbox:~$ But alsa aplications like aplay and flashplayer seem to ignore pulseaudio: rd@blackbox:~$ aplay --device=pulse /home/rd/.config/libreoffice/3/user/gallery/ATT431.wav plays on the Intel card not on the USB headset. If any information is missing, please let me know I can easily add it. Many thanks, Rainer -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (600, 'testing'), (500, 'stable'), (300, 'unstable'), (250, 'experimental') Architecture: i386 (i686) Kernel: Linux 3.13-1-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libasound2-plugins depends on: ii libasound2 1.0.27.2-3 ii libavcodec54 6:9.11-3 ii libavutil52 6:9.11-3 ii libc6 2.18-4 ii libjack0 [libjack-0.116] 1:0.124.1+20140122git5013bed0-2 ii libpulse0 4.0-6+b1 ii libsamplerate0 0.1.8-7 ii libspeexdsp1 1.2~rc1.1-1 ii multiarch-support 2.18-4 libasound2-plugins recommends no packages. libasound2-plugins suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
