Package: kernel-image-2.6.8-2-386 Version: 2.6.8-13 Severity: normal Kernel oopses with AVM B1. dmesg and ksymmops is attached. I'd be happy to give more information.
-- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i586) Kernel: Linux 2.6.8-2-386 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) Versions of packages kernel-image-2.6.8-2-386 depends on: ii coreutils [fileutils] 5.2.1-2 The GNU core utilities ii fileutils 5.2.1-2 The GNU file management utilities ii initrd-tools 0.1.77 tools to create initrd image for p ii module-init-tools 3.2-pre1-2 tools for managing Linux kernel mo -- no debconf information
capiinit start: CAPI Subsystem Rev 1.1.2.8 capifs: Rev 1.1.2.3 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) b1: revision 1.1.2.2 b1isa: revision 1.1.2.3 kcapi: Controller 1: b1isa-150 attached b1isa: AVM B1 ISA at i/o 0x150, irq 12, revision 1 b1isa-150: card 1 "B1" ready. b1isa-150: card 1 Protocol: DSS1 b1isa-150: card 1 Linetype: point to point b1isa-150: B1-card (3.09-10) now active kcapi: card 1 "b1isa-150" ready. capiinit stop: kcapi: card 1 down. Unable to handle kernel paging request at virtual address c8a1c4dc printing eip: c8a1c4dc *pde = 01234067 *pte = 00000000 Oops: 0000 [#1] PREEMPT Modules linked in: capi capifs kernelcapi nfsd exportfs lockd sunrpc cls_fw ipt_MARK ipt_length iptable_mangle sch_htb ipt_MASQUERADE ipt_LOG ipt_state iptable_nat ip_conntrack iptable_filter ip_tables ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt af_packet ipv6 ohci_hcd usbcore ali_agp agpgart pcspkr rtc floppy parport_pc parport evdev dm_mod capability commoncap 3c59x e100 mii ppp_generic slhc eeprom w83781d i2c_sensor i2c_ali15x3 i2c_core msr cpuid ext3 jbd ide_generic ide_disk alim15x3 pdc202xx_new ide_core raid1 md unix font vesafb cfbcopyarea cfbimgblt cfbfillrect CPU: 0 EIP: 0060:[<c8a1c4dc>] Not tainted EFLAGS: 00010282 (2.6.8-2-386) EIP is at 0xc8a1c4dc eax: c8a66560 ebx: c3de9cc8 ecx: 00000000 edx: c05c3f5c esi: c8a66560 edi: c8a66560 ebp: 00000400 esp: c05c3f34 ds: 007b es: 007b ss: 0068 Process capiinit (pid: 4881, threadinfo=c05c2000 task=c6c8e2b0) Stack: c8a5f958 c3de9cc8 c70594e0 c015d845 c70594e0 c8a66560 40018000 00000000 00100073 00000000 00000000 00000000 00000000 c3af0ba0 c05c3fac 00000400 c014480a c3af0ba0 40018000 00000400 c05c3fac c3af0ba0 fffffff7 401448a0 Call Trace: [<c8a5f958>] controller_show+0x15/0x53 [kernelcapi] [<c015d845>] seq_read+0xd6/0x23d [<c014480a>] vfs_read+0xaf/0xd9 [<c01449e6>] sys_read+0x3b/0x63 [<c0105f97>] syscall_call+0x7/0xb Code: Bad EIP value.
[EMAIL PROTECTED]:~# ksymoops < oops.txt ksymoops 2.4.9 on i586 2.6.8-2-386. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.6.8-2-386/ (default) -m /boot/System.map-2.6.8-2-386 (default) Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options. Error (regular_file): read_ksyms stat /proc/ksyms failed ksymoops: No such file or directory No modules in ksyms, skipping objects No ksyms, skipping lsmod Unable to handle kernel paging request at virtual address c8a1c4dc c8a1c4dc *pde = 01234067 Oops: 0000 [#1] CPU: 0 EIP: 0060:[<c8a1c4dc>] Not tainted Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010282 (2.6.8-2-386) eax: c8a66560 ebx: c3de9cc8 ecx: 00000000 edx: c05c3f5c esi: c8a66560 edi: c8a66560 ebp: 00000400 esp: c05c3f34 ds: 007b es: 007b ss: 0068 Stack: c8a5f958 c3de9cc8 c70594e0 c015d845 c70594e0 c8a66560 40018000 00000000 00100073 00000000 00000000 00000000 00000000 c3af0ba0 c05c3fac 00000400 c014480a c3af0ba0 40018000 00000400 c05c3fac c3af0ba0 fffffff7 401448a0 Call Trace: [<c8a5f958>] controller_show+0x15/0x53 [kernelcapi] [<c015d845>] seq_read+0xd6/0x23d [<c014480a>] vfs_read+0xaf/0xd9 [<c01449e6>] sys_read+0x3b/0x63 [<c0105f97>] syscall_call+0x7/0xb Code: Bad EIP value. >>EIP; c8a1c4dc <__crc_acpi_evaluate_reference+7cee6/22285e> <===== >>eax; c8a66560 <__crc_acpi_evaluate_reference+c6f6a/22285e> >>ebx; c3de9cc8 <__crc_in_group_p+f8ba0/108953> >>edx; c05c3f5c <pg0+25ff5c/6fbdbd> >>esi; c8a66560 <__crc_acpi_evaluate_reference+c6f6a/22285e> >>edi; c8a66560 <__crc_acpi_evaluate_reference+c6f6a/22285e> >>esp; c05c3f34 <pg0+25ff34/6fbdbd> Trace; c8a5f958 <__crc_acpi_evaluate_reference+c0362/22285e> Trace; c015d845 <seq_read+d6/23d> Trace; c014480a <vfs_read+af/d9> Trace; c01449e6 <sys_read+3b/63> Trace; c0105f97 <syscall_call+7/b> 1 warning and 1 error issued. Results may not be reliable. [EMAIL PROTECTED]:~#
Linux version 2.6.8-2-386 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-6)) #1 Mon Jan 24 03:01:58 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007ffc000 (usable) BIOS-e820: 0000000007ffc000 - 0000000007fff000 (ACPI data) BIOS-e820: 0000000007fff000 - 0000000008000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB LOWMEM available. On node 0 totalpages: 32764 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 28668 pages, LIFO batch:6 HighMem zone: 0 pages, LIFO batch:1 DMI 2.0 present. ACPI: RSDP (v000 ASUS ) @ 0x000f81a0 ACPI: RSDT (v001 ASUS P5A 0x58582e31 ASUS 0x31303030) @ 0x07ffc000 ACPI: FADT (v001 ASUS P5A 0x58582e31 ASUS 0x31303030) @ 0x07ffc080 ACPI: BOOT (v001 ASUS P5A 0x58582e31 ASUS 0x31303030) @ 0x07ffc040 ACPI: DSDT (v001 ASUS P5A 0x00001000 MSFT 0x01000001) @ 0x00000000 ACPI: PM-Timer IO Port: 0xec08 Built 1 zonelists Kernel command line: auto BOOT_IMAGE=Linux ro root=900 video=vga16:off acpi=force devfs=mount No local APIC present or hardware disabled Initializing CPU#0 PID hash table entries: 512 (order 9: 4096 bytes) PM-Timer running at invalid rate: 200% of normal - aborting. Detected 400.953 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 122416k/131056k available (1335k kernel code, 8084k reserved, 733k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 792.57 BogoMIPS Security Scaffold v1.0.0 initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000 CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000 CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line) CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002 CPU: AMD-K6(tm) 3D processor stepping 0c Checking 'hlt' instruction... OK. Checking for popad bug... OK. checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 4360k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xf06c0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fd1d0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xd200, dseg 0xf0000 pnp: 00:11: ioport range 0x290-0x297 has been reserved pnp: 00:11: ioport range 0x40b-0x40b has been reserved pnp: 00:11: ioport range 0x480-0x49f has been reserved pnp: 00:11: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:11: ioport range 0xec00-0xec3f has been reserved pnp: 00:11: ioport range 0xe800-0xe83f has been reserved PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI Simple Boot Flag at 0x46 set to 0x1 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x1 Initializing Cryptographic API Activating ISA DMA hang workarounds. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI interrupt 0000:00:09.1[A] -> GSI 9 (level, low) -> IRQ 9 ttyS14 at I/O 0xd800 (irq = 9) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 EISA: Probing bus 0 at eisa0 Cannot allocate resource for EISA slot 5 EISA: Detected 0 cards. NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4360 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. VFS: Mounted root (cramfs filesystem) readonly. Mounted devfs on /dev Mounted devfs on /dev Freeing unused kernel memory: 204k freed vesafb: probe of vesafb0 failed with error -6 NET: Registered protocol family 1 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: raid1 personality registered as nr 3 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20269: IDE controller at PCI slot 0000:00:0c.0 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11 PDC20269: chipset revision 2 PDC20269: 100% native mode on irq 11 ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio hde: IC35L120AVV207-0, ATA DISK drive Using anticipatory io scheduler ide2 at 0xb800-0xb807,0xb402 on irq 11 hde: max request size: 1024KiB hde: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host2/bus0/target0/lun0: p1 hdg: IC35L120AVV207-0, ATA DISK drive ide3 at 0xb000-0xb007,0xa802 on irq 11 hdg: max request size: 1024KiB hdg: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host2/bus1/target0/lun0: p1 ALI15X3: IDE controller at PCI slot 0000:00:0f.0 ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI ALI15X3: chipset revision 193 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pio hda: ST32122A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 4124736 sectors (2111 MB) w/128KiB Cache, CHS=4092/16/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 p2 hdc: ST32532A, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 4995648 sectors (2557 MB) w/128KiB Cache, CHS=4956/16/63, UDMA(33) /dev/ide/host0/bus1/target0/lun0: p1 p2 p3 md: md0 stopped. md: bind<hdc1> md: bind<hda1> raid1: raid set md0 active with 2 out of 2 mirrors kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 60472k swap on /dev/hda2. Priority:-1 extents:1 Adding 68536k swap on /dev/hdc2. Priority:-2 extents:1 EXT3 FS on md0, internal journal CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 e100: Intel(R) PRO/100 Network Driver, 3.0.18 e100: Copyright(c) 1999-2004 Intel Corporation ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5 e100: eth0: e100_probe: addr 0xde800000, irq 5, MAC addr 00:02:B3:29:7A:84 ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xd000. Vers LK1.1.19 Capability LSM initialized device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on hdg1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hde1, internal journal EXT3-fs: mounted filesystem with ordered data mode. parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] inserting floppy driver for 2.6.8-2-386 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Real Time Clock Driver v1.12 input: PC Speaker Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected ALi M1541 chipset agpgart: Maximum main memory to use for agp memory: 94M agpgart: AGP aperture is 64M @ 0xe0000000 usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 9 (level, low) -> IRQ 9 ohci_hcd 0000:00:02.0: ALi Corporation USB 1.1 Controller PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 9, pci mem c8916000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex