Package: klibc-utils Version: 2.0.2-1 Severity: normal Hi!
I'm trying to boot a machine with two e1000e interfaces and nfsroot. It works fine with kernel 3.2.0-4-amd64, but fails to get DHCP address with 3.11.10-1~bpo70+1-amd64. Network is attached only to eth1, eth0 is left unconnected. There is also an IPMI console session over connected interface. Manual network configuration from initramfs shell (root is set to non-existent device to achieve this shell) gives this: (initramfs) ipconfig -t 2 -c dhcp -d "" IP-Config: eth1 hardware address f4:6d:04:03:28:40 mtu 1500 DHCP IP-Config: eth0 hardware address f4:6d:04:03:27:99 mtu 1500 DHCP IP-Config: no response after 2 secs - giving up (initramfs) ipconfig -t 2 -c dhcp -d eth1 IP-Config: eth1 hardware address f4:6d:04:03:28:40 mtu 1500 DHCP IP-Config: eth1 complete (dhcp from 192.168.0.254): address: 192.168.0.18 broadcast: 192.168.0.255 netmask: 255.255.255.0 gateway: 192.168.0.254 dns0 : 192.168.0.254 dns1 : 0.0.0.0 host : node-18 rootserver: 192.168.0.254 rootpath: filename : In the first case and "in the wild" ipconfig sends DISCOVER request, but ignores OFFER. To workaround this issue I have to set "IPAPPEND 2" in pxelinux config file. -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (990, 'testing'), (192, 'unstable') Architecture: i386 (x86_64) Kernel: Linux 3.12-1-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to ru_RU.UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages klibc-utils depends on: ii libklibc 2.0.2-1 klibc-utils recommends no packages. klibc-utils suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
