Package: src:linux
Followup-For: Bug #691902
Dear Maintainer,
I am unable to shutdown the computer by any means other then pressing the
power button. I tried poweroff, shutdown -h -p, shutdown from KDE, etc.
I tried kernel 2.6.32-5-amd64 and that works, i.e., it shuts down correctly.
I also tried to comment the (halt -p -f ) command in K12halt at
runlevel 0 and then do a halt. In this situation it restarts after shutdown as
well.
When I halt the system before running:
K03network-manager
K03nslcd
K03postgresql
K03slapd
K03spamassassin
K03virtualbox-ose
K04sendsigs
K05rsyslog
K06umountnfs.sh
K07nfs-common
K07rpcbind
K08hwclock.sh
K08networking
K09umountfs
10mdadm-raid
K10umountroot
K11mdadm-waitidle
the PC powers off correctly.
I tried some kernel paramters like acpi=noirq, acpi=force to no avail.
Any help or workaround would be greatly appreciated
Cheers
Michael
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-ker...@lists.debian.org) (gcc version 4.6.3
(Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64
root=UUID=ff63dec0-9e54-497f-a57a-ad4ee06a7b98 ro acpi=noirq quiet splash
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 6.162796] EDAC amd64: DRAM ECC enabled.
[ 6.162802] EDAC amd64: K8 revE or earlier detected (node 1).
[ 6.162870] EDAC amd64: CS0: Registered Double data rate SDRAM
[ 6.162873] EDAC amd64: CS2: Registered Double data rate SDRAM
[ 6.162913] EDAC MC1: Giving out device to 'amd64_edac' 'K8': DEV
0000:00:19.2
[ 6.163497] EDAC PCI0: Giving out device to module 'amd64_edac' controller
'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 6.171224] ACPI: resource 0000:00:07.2 [io 0xcc00-0xcc1f] conflicts with
ACPI region ECIO [io 0xcc00-0xcc1f]
[ 6.171228] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.200461] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies,
Starnberg, GERMANY' taints kernel.
[ 6.200469] Disabling lock debugging due to kernel taint
[ 6.470779] AMD768 RNG detected
[ 6.487937] [fglrx] Maximum main memory to use for locked dma buffers: 8830
MBytes.
[ 6.488437] [fglrx] vendor: 1002 device: 94cc count: 1
[ 6.489094] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 6.489147] pci 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 28
[ 6.489157] pci 0000:04:00.0: setting latency timer to 64
[ 6.489616] [fglrx] Kernel PAT support is enabled
[ 6.489651] [fglrx] module loaded - fglrx 8.97.2 [Nov 16 2012] with 1 minors
[ 6.496798] powernow-k8: Power state transitions not supported
[ 6.496807] powernow-k8: Power state transitions not supported
[ 6.517563] parport_pc 00:0a: reported by Plug and Play ACPI
[ 6.517688] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 6.556089] ACPI: resource amd756_smbus [io 0x10e0-0x10ef] conflicts with
ACPI region PMIO [io 0x1000-0x10fe]
[ 6.556094] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 6.612377] parport_pc 0000:02:02.0: PCI->APIC IRQ transform: INT A -> IRQ 26
[ 6.612384] PCI parallel port detected: 1409:7268, I/O at 0x8c00(0x8480),
IRQ 26
[ 6.612414] parport1: PC-style at 0x8c00 (0x8480), irq 26 [PCSPP,TRISTATE]
[ 6.736515] psmouse serio1: logips2pp: Detected unknown Logitech mouse model
127
[ 7.140491] snd_hda_intel 0000:04:00.1: PCI->APIC IRQ transform: INT B ->
IRQ 28
[ 7.140576] snd_hda_intel 0000:04:00.1: setting latency timer to 64
[ 7.287432] input: ImExPS/2 Logitech Explorer Mouse as
/devices/platform/i8042/serio1/input/input4
[ 10.168023] hda-intel: azx_get_response timeout, switching to polling mode:
last cmd=0x000f0001
[ 10.185655] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 10.185814] input: HDA ATI HDMI HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:0b.0/0000:03:03.0/0000:04:00.1/sound/card0/input5
[ 11.574752] Adding 979960k swap on /dev/sdb2. Priority:-1 extents:1
across:979960k
[ 11.630000] Adding 979960k swap on /dev/sdc2. Priority:-2 extents:1
across:979960k
[ 12.210687] EXT3-fs (md1): using internal journal
[ 12.326219] loop: module loaded
[ 12.584849] vboxdrv: Found 2 processor cores.
[ 12.585026] vboxdrv: fAsync=0 offMin=0x5c0 offMax=0x1a1c
[ 12.585176] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is
'normal'.
[ 12.585179] vboxdrv: Successfully loaded version 4.2.16 (interface
0x001a0005).
[ 14.849437] kjournald starting. Commit interval 5 seconds
[ 14.877552] EXT3-fs (md0): using internal journal
[ 14.877560] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 14.921990] kjournald starting. Commit interval 5 seconds
[ 14.956090] EXT3-fs (md2): using internal journal
[ 14.956094] EXT3-fs (md2): mounted filesystem with ordered data mode
[ 14.981408] kjournald starting. Commit interval 5 seconds
[ 14.982130] EXT3-fs (sda1): using internal journal
[ 14.982134] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 16.589391] tg3 0000:02:09.1: firmware: agent loaded tigon/tg3_tso.bin into
memory
[ 16.658771] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 18.206803] tg3 0000:02:09.1: eth2: Link is up at 100 Mbps, full duplex
[ 18.206809] tg3 0000:02:09.1: eth2: Flow control is on for TX and on for RX
[ 18.209882] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 18.629218] FS-Cache: Loaded
[ 18.648255] FS-Cache: Netfs 'cifs' registered for caching
[ 24.680089] CIFS VFS: Error connecting to socket. Aborting operation
[ 24.680381] CIFS VFS: cifs_mount failed w/return code = -113
[ 28.656025] eth2: no IPv6 routers present
[ 30.680057] CIFS VFS: Error connecting to socket. Aborting operation
[ 30.680515] CIFS VFS: cifs_mount failed w/return code = -113
[ 32.071465] RPC: Registered named UNIX socket transport module.
[ 32.071470] RPC: Registered udp transport module.
[ 32.071473] RPC: Registered tcp transport module.
[ 32.071475] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 32.114055] FS-Cache: Netfs 'nfs' registered for caching
[ 32.134392] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 35.351023] Bluetooth: Core ver 2.16
[ 35.351059] NET: Registered protocol family 31
[ 35.351062] Bluetooth: HCI device and connection manager initialized
[ 35.351067] Bluetooth: HCI socket layer initialized
[ 35.351070] Bluetooth: L2CAP socket layer initialized
[ 35.351076] Bluetooth: SCO socket layer initialized
[ 35.373260] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 35.373265] Bluetooth: BNEP filters: protocol multicast
[ 35.394158] Bluetooth: RFCOMM TTY layer initialized
[ 35.394173] Bluetooth: RFCOMM socket layer initialized
[ 35.394176] Bluetooth: RFCOMM ver 1.11
[ 35.507707] lp0: using parport0 (interrupt-driven).
[ 35.508045] lp1: using parport1 (interrupt-driven).
[ 35.520921] ppdev: user-space parallel port driver
[ 38.592235] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 42.011224] powernow-k8: Power state transitions not supported
[ 42.011233] powernow-k8: Power state transitions not supported
[ 42.293835] [fglrx] Could not enable MSI; System prevented initialization
[ 42.294731] [fglrx] Firegl kernel thread PID: 3920
[ 42.294830] [fglrx] Firegl kernel thread PID: 3921
[ 42.294962] [fglrx] Firegl kernel thread PID: 3922
[ 42.295160] [fglrx] IRQ 28 Enabled
[ 43.793282] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 43.846969] NFSD: starting 90-second grace period
[ 44.426136] [fglrx] Gart USWC size:1279 M.
[ 44.426141] [fglrx] Gart cacheable size:508 M.
[ 44.426148] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 44.426151] [fglrx] Reserved FB block: Unshared offset:fbfb000, size:401000
[ 44.426154] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
[ 58.400229] postgres (4967): /proc/4967/oom_adj is deprecated, please use
/proc/4967/oom_score_adj instead.
[ 64.656704] warning: `VBoxHeadless' uses 32-bit capabilities (legacy support
in use)
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: 080010
board_vendor: TYAN
board_name: TYAN High-End Dual AMD Opteron, S2882
board_version: To be filled by O.E.M.
** Loaded modules:
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
xt_multiport
iptable_filter
ip_tables
x_tables
ppdev
lp
rfcomm
bnep
bluetooth
rfkill
crc16
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
lockd
sunrpc
hmac
nls_utf8
cifs
fscache
vboxdrv(O)
loop
snd_hda_codec_hdmi
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
snd
i2c_amd756
parport_pc
soundcore
fglrx(P)
amd_rng
parport
rng_core
mperf
psmouse
serio_raw
evdev
i2c_amd8111
amd64_edac_mod
i2c_core
edac_mce_amd
pcspkr
k8temp
edac_core
processor
shpchp
thermal_sys
button
ext3
mbcache
jbd
raid1
md_mod
sg
sd_mod
crc_t10dif
sr_mod
cdrom
usbhid
ata_generic
hid
sata_sil
pata_amd
8139too
floppy
ohci_hcd
ehci_hcd
usbcore
tg3
libphy
e100
mii
usb_common
libata
scsi_mod
** Network interface configuration:
auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0
auto eth2
iface eth2 inet static
address 192.168.15.80
netmask 255.255.255.0
gateway 192.168.15.10
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:e0:81:43:b8:f1 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:e0:81:43:b9:10 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:e0:81:43:b9:11 brd ff:ff:ff:ff:ff:ff
inet 192.168.15.80/24 brd 192.168.15.255 scope global eth2
inet6 fe80::2e0:81ff:fe43:b911/64 scope link
valid_lft forever preferred_lft forever
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:26:5a:eb:37:45 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
eth3: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
lo: 724340 3206 0 0 0 0 0 0 724340
3206 0 0 0 0 0 0
eth2: 3556379 6604 0 0 0 0 0 89 392625
3108 0 0 0 0 0 0
eth1: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
7726 total packets received
0 forwarded
0 incoming packets discarded
7726 incoming packets delivered
6181 requests sent out
12 dropped because of missing route
Icmp:
22 ICMP messages received
8 input ICMP message failed.
ICMP input histogram:
destination unreachable: 22
13 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 13
IcmpMsg:
InType3: 22
OutType3: 13
Tcp:
164 active connections openings
83 passive connection openings
14 failed connection attempts
0 connection resets received
28 connections established
5459 segments received
4936 segments send out
25 segments retransmited
5 bad segments received.
10 resets sent
Udp:
3154 packets received
1 packets to unknown port received.
0 packet receive errors
1218 packets sent
UdpLite:
TcpExt:
104 TCP sockets finished time wait in fast timer
106 delayed acks sent
Quick ack mode was activated 96 times
547 packets directly queued to recvmsg prequeue.
8250 bytes directly received in process context from prequeue
2996 packet headers predicted
18 packets header predicted and directly queued to user
325 acknowledgments not containing data payload received
1695 predicted acknowledgments
11 retransmits in slow start
5 other TCP timeouts
96 DSACKs sent for old packets
1 connections aborted due to timeout
TCPChallengeACK: 4
TCPSYNChallenge: 4
IpExt:
InMcastPkts: 221
OutMcastPkts: 149
InBcastPkts: 1008
OutBcastPkts: 54
InOctets: 4089139
OutOctets: 1049472
InMcastOctets: 43241
OutMcastOctets: 29819
InBcastOctets: 94693
OutBcastOctets: 5059
** PCI devices:
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8111 PCI
[1022:7460] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00007000-00007fff
Memory behind bridge: ff200000-ff3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:07.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-8111 LPC
[1022:7468] (rev 05)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 LPC [1022:7468]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-8111 IDE
[1022:7469] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 IDE [1022:7469]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: pata_amd
00:07.2 SMBus [0c05]: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0
[1022:746a] (rev 02)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 [1022:746a]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 11
Region 0: I/O ports at cc00 [size=32]
00:07.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-8111 ACPI [1022:746b]
(rev 05)
Subsystem: Advanced Micro Devices [AMD] AMD-8111 ACPI [1022:746b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00008000-00008fff
Memory behind bridge: ff400000-ff4fffff
Prefetchable memory behind bridge: 00000000de900000-00000000de9fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0a.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] Device [1022:36c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at ff6fe000 (64-bit, non-prefetchable) [size=4K]
00:0b.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=04, sec-latency=64
I/O behind bridge: 00009000-0000bfff
Memory behind bridge: ff500000-ff5fffff
Prefetchable memory behind bridge: 00000000dea00000-00000000feafffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0b.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] Device [1022:36c0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at ff6ff000 (64-bit, non-prefetchable) [size=4K]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:00.0 USB controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB OHCI
[1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB OHCI [1022:7464]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at ff3fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
01:00.1 USB controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB OHCI
[1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Advanced Micro Devices [AMD] AMD-8111 USB OHCI [1022:7464]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at ff3fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
01:05.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3114
[SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3114 SATALink Controller [1095:3114]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 7c00 [size=8]
Region 1: I/O ports at 7880 [size=4]
Region 2: I/O ports at 7800 [size=8]
Region 3: I/O ports at 7480 [size=4]
Region 4: I/O ports at 7400 [size=16]
Region 5: Memory at ff3ffc00 (32-bit, non-prefetchable) [size=1K]
Expansion ROM at ff300000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
01:08.0 Ethernet controller [0200]: Intel Corporation 82557/8/9/0/1 Ethernet
Pro 100 [8086:1229] (rev 10)
Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter
[8086:1040]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at ff3fe000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 7080 [size=64]
Region 2: Memory at ff3c0000 (32-bit, non-prefetchable) [size=128K]
Capabilities: <access denied>
Kernel driver in use: e100
02:02.0 Parallel controller [0701]: Timedia Technology Co Ltd SUN1888 (Dual
IEEE1284 parallel port) [1409:7268] (rev 01) (prog-if 02 [ECP])
Subsystem: Timedia Technology Co Ltd PAR4008A [1409:0103]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 8c00 [size=8]
Region 1: I/O ports at 8480 [size=8]
Kernel driver in use: parport_pc
02:03.0 Ethernet controller [0200]: D-Link System Inc RTL8139 Ethernet
[1186:1300] (rev 10)
Subsystem: D-Link System Inc DFE-528TX 10/100 Fast Ethernet PCI Adapter
[1186:1303]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 8800 [size=256]
Region 1: Memory at ff4bfc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: 8139too
02:09.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Broadcom Corporation Device [14e4:1644]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
Region 0: Memory at ff4d0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at ff4c0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
02:09.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704
Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Broadcom Corporation Device [14e4:1644]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 25
Region 0: Memory at ff4f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at ff4e0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
03:03.0 PCI bridge [0604]: PLX Technology, Inc. PEX8112 x1 Lane PCI
Express-to-PCI Bridge [10b5:8112] (rev aa) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 00009000-0000bfff
Memory behind bridge: ff500000-ff5fffff
Prefetchable memory behind bridge: dea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
04:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
RV610 LE [Radeon HD 2400 Pro PCI] [1002:94cc] (prog-if 00 [VGA controller])
Subsystem: Hightech Information System Ltd. Device [1787:2234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at ff5f0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at b000 [size=256]
Expansion ROM at ff5c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
04:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV610 HDMI
Audio [Radeon HD 2350/2400 Series] [1002:aa10]
Subsystem: Hightech Information System Ltd. Device [1787:aa10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 28
Region 0: Memory at ff5ec000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0665:5161 Cypress Semiconductor USB to Serial
-- System Information:
Debian Release: 7.1
APT prefers stable
APT policy: (990, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36+wheezy.1
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
