Package: system-config-printer
Version: 1.4.1-3
Severity: important
Dear Maintainer,
* What led up to the situation?
Need configure network hp printer (HP LaserJet 400). Install system-config-
printer, hplip
* What exactly did you do (or not do) that was effective (or
ineffective)?
Run system-config-printer, push "Add printer". Select "Find network printer",
enter ip, pushed "Find" button.
Connection in list - HP Linux Imaging and Printing.
* What was the outcome of this action?
Search dialog appeared and then dissapeared. Wizard left in the same stage.
* What outcome did you expect instead?
Search dialog appeared and then dissapeared. Wizard advanced to driver select
dialog.
Output of buggy proccess in terminal attached.
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: armhf (armv7l)
Kernel: Linux 3.4.0 (SMP w/2 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages system-config-printer depends on:
ii gir1.2-gdkpixbuf-2.0 2.28.2-1
ii gir1.2-glib-2.0 1.36.0-2+b1
ii gir1.2-gtk-3.0 3.8.2-3
ii gir1.2-notify-0.7 0.7.5-2
ii gir1.2-packagekitglib-1.0 0.8.9-2
ii gir1.2-pango-1.0 1.32.5-5+b1
ii gnome-icon-theme 3.8.2-2
ii python 2.7.5-2
ii python-cups 1.9.62-2
ii python-cupshelpers 1.4.1-3
ii python-dbus 1.2.0-2
ii python-libxml2 2.9.1+dfsg1-2
ii python-support 1.0.15
Versions of packages system-config-printer recommends:
ii cups-pk-helper 0.2.5-1
ii gir1.2-gnomekeyring-1.0 3.8.0-2
ii python-smbc 1.0.6-1
ii system-config-printer-udev 1.4.1-3
Versions of packages system-config-printer suggests:
pn python-gnomekeyring <none>
pn sessioninstaller <none>
-- no debconf information
> system-config-printer
** (system-config-printer.py:3182): WARNING **: Couldn't register with
accessibility bus: Did not receive a reply. Possible causes include: the remote
application did not send a reply, the message bus security policy blocked the
reply, the reply timeout expired, or the network connection was broken.
PASSTHRU
'\x00'
ps
'\x00'
lp
'\x00'
PORT1
'\x00'
'\x00'
LPT0
'\x00'
LPT0_PASSTHRU
'\x00'
COM0
'\x00'
COM0_PASSTHRU
'\x00'
LPT1
'\x00'
LPT1_PASSTHRU
'\x00'
COM1
'\x00'
COM1_PASSTHRU
'\x00'
LPT2
'\x00'
LPT2_PASSTHRU
'\x00'
COM2
'\x00'
COM2_PASSTHRU
'\x00'
LPT3
'\x00'
LPT3_PASSTHRU
'\x00'
COM3
'\x00'
COM3_PASSTHRU
'\x00'
LPT4
'\x00'
LPT4_PASSTHRU
'\x00'
COM4
'\x00'
COM4_PASSTHRU
'\x00'
LPT5
'\x00'
LPT5_PASSTHRU
'\x00'
COM5
'\x00'
COM5_PASSTHRU
'\x00'
LPT6
'\x00'
LPT6_PASSTHRU
'\x00'
COM6
'\x00'
COM6_PASSTHRU
'\x00'
LPT7
'\x00'
LPT7_PASSTHRU
'\x00'
COM7
'\x00'
COM7_PASSTHRU
'\x00'
pr0
'\x00'
pr1
'\x00'
pr2
'\x00'
pr3
'\x00'
pr4
'\x00'
pr5
'\x00'
pr6
'\x00'
pr7
'\x00'
pr8
'\x00'
pr9
'\x00'
pr10
'\x00'
pr11
'\x00'
pr12
'\x00'
pr13
'\x00'
pr14
'\x00'
pr15
'\x00'
pr16
'\x00'
pr17
'\x00'
pr18
'\x00'
pr19
'\x00'
pr20
'\x00'
pr21
'\x00'
pr22
'\x00'
pr23
'\x00'
pr24
'\x00'
pr25
'\x00'
pr26
'\x00'
pr27
'\x00'
pr28
'\x00'
pr29
'\x00'
pr30
'\x00'
pr31
'\x00'
pr32
'\x00'
pr33
'\x00'
pr34
'\x00'
pr35
'\x00'
pr36
'\x00'
pr37
'\x00'
pr38
'\x00'
pr39
'\x00'
pr40
'\x00'
pr41
'\x00'
pr42
'\x00'
pr43
'\x00'
pr44
'\x00'
pr45
'\x00'
pr46
'\x00'
pr47
'\x00'
pr48
'\x00'
pr49
'\x00'
No ID match for device hp:/net/HP_LaserJet_400_M401dn?ip=10.1.4.175:
MFG:HP;MDL:LaserJet 400 M401dn;
Traceback (most recent call last):
File "/usr/share/system-config-printer/newprinter.py", line 3425, in
on_tvNPMakes_cursor_changed
self.fillModelList()
File "/usr/share/system-config-printer/newprinter.py", line 3443, in
fillModelList
text = pmodel + _(" (recommended)")
UnicodeDecodeError: 'ascii' codec can't decode byte 0xd1 in position 2: ordinal
not in range(128)
Traceback (most recent call last):
File "/usr/share/system-config-printer/newprinter.py", line 791, in
on_ppdsloader_finished_next
self.nextNPTab ()
File "/usr/share/system-config-printer/newprinter.py", line 1405, in nextNPTab
self.ppd = self.getNPPPD()
File "/usr/share/system-config-printer/newprinter.py", line 3715, in getNPPPD
nr = model.get_path(iter)[0]
File "/usr/lib/python2.7/dist-packages/gi/types.py", line 113, in function
return info.invoke(*args, **kwargs)
TypeError: Argument 1 does not allow None as a value
