Package: firmware-bnx2x
Version: 0.36+wheezy.1
Severity: normal
File: bnx2x
Dear Maintainer,
I am trying to get wheezy running on a Dell R620 server (12th generation).
Using wheezy everything is working nicely, except for a Broadcom 10Gbit network
adapter (BCM57810).
Yes, I installed firmware-bnx2x; the card is detected, but when I try to pull
up the interface the status turns to "UP" but not "RUNNING", and dmesg reports:
**********************
ADDRCONF(NETDEV_UP): eth1: link is not ready
**********************
Before pulling up the interface, dmesg reports:
**********************
[ 2.846145] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet
Driver bnx2x 1.70.30-0 (2011/10/25)
[ 2.846313] bnx2x 0000:05:00.0: setting latency timer to 64
[ 2.847102] bnx2x 0000:05:00.0: part number 0-0-0-0
[ 2.847212] WARNING: at
/build/linux-s5x2oE/linux-3.2.46/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:8886
bnx2x_init_one+0xdc8/0x2b5d [bnx2x]()
[ 2.847218] Modules linked in: bnx2x(+) mdio crc32c tg3(+) ehci_hcd(+)
usbcore megaraid_sas(+) usb_common scsi_mod libphy libcrc32c
[ 2.847257] [<ffffffffa01ad54d>] ? bnx2x_init_one+0xdc8/0x2b5d [bnx2x]
[ 2.856288] bnx2x 0000:05:00.0: irq 124 for MSI/MSI-X
[ 2.856299] bnx2x 0000:05:00.0: irq 125 for MSI/MSI-X
[ 2.856309] bnx2x 0000:05:00.0: irq 126 for MSI/MSI-X
[ 2.856319] bnx2x 0000:05:00.0: irq 127 for MSI/MSI-X
[ 2.856329] bnx2x 0000:05:00.0: irq 128 for MSI/MSI-X
[ 2.856339] bnx2x 0000:05:00.0: irq 129 for MSI/MSI-X
[ 2.856349] bnx2x 0000:05:00.0: irq 130 for MSI/MSI-X
[ 2.856358] bnx2x 0000:05:00.0: irq 131 for MSI/MSI-X
[ 2.856368] bnx2x 0000:05:00.0: irq 132 for MSI/MSI-X
[ 2.856378] bnx2x 0000:05:00.0: irq 133 for MSI/MSI-X
[ 2.857407] bnx2x 0000:05:00.0: eth1: Broadcom NetXtreme II BCM57810 10
Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem d5000000, IRQ 48, node
addr 00:10:18:e9:d9:80
[ 2.865619] bnx2x 0000:05:00.1: setting latency timer to 64
[ 2.866448] bnx2x 0000:05:00.1: part number 0-0-0-0
[ 2.866552] WARNING: at
/build/linux-s5x2oE/linux-3.2.46/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:8886
bnx2x_init_one+0xdc8/0x2b5d [bnx2x]()
[ 2.866557] Modules linked in: ahci(+) libahci libata bnx2x(+) mdio crc32c
tg3(+) ehci_hcd(+) usbcore megaraid_sas(+) usb_common scsi_mod libphy libcrc32c
[ 2.866592] [<ffffffffa01ad54d>] ? bnx2x_init_one+0xdc8/0x2b5d [bnx2x]
[ 2.870984] bnx2x 0000:05:00.1: irq 134 for MSI/MSI-X
[ 2.870998] bnx2x 0000:05:00.1: irq 135 for MSI/MSI-X
[ 2.871008] bnx2x 0000:05:00.1: irq 136 for MSI/MSI-X
[ 2.871018] bnx2x 0000:05:00.1: irq 137 for MSI/MSI-X
[ 2.871027] bnx2x 0000:05:00.1: irq 138 for MSI/MSI-X
[ 2.871037] bnx2x 0000:05:00.1: irq 139 for MSI/MSI-X
[ 2.871047] bnx2x 0000:05:00.1: irq 140 for MSI/MSI-X
[ 2.871058] bnx2x 0000:05:00.1: irq 141 for MSI/MSI-X
[ 2.871068] bnx2x 0000:05:00.1: irq 142 for MSI/MSI-X
[ 2.871078] bnx2x 0000:05:00.1: irq 143 for MSI/MSI-X
[ 2.872115] bnx2x 0000:05:00.1: eth2: Broadcom NetXtreme II BCM57810 10
Gigabit Ethernet (B0) PCI-E x8 5GHz (Gen2) found at mem d6000000, IRQ 52, node
addr 00:10:18:e9:d9:82
**********************
Ethtool always report:
**********************
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 100baseT/Half 100baseT/Full
1000baseT/Full
10000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Advertised link modes: 100baseT/Half 100baseT/Full
1000baseT/Full
10000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Full
Port: Twisted Pair
PHYAD: 16
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: g
Wake-on: d
Current message level: 0x00000000 (0)
Link detected: no
**********************
I tried compiling Broadcom drivers, but it looks like they are meant for 2.6
Kernels; at least, several #ifndef are missing.
The interface is directly connected to an identical machine running Citrix
XenServer 6.1; I am sure that the other end is ok, since I tested it connecting
it to a third R620 XenServer machine.
I also tested CenOs 6.4, and there everything is ok---but I would rather stick
to Debian, honestly.
-- System Information:
Debian Release: 7.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
firmware-bnx2x depends on no packages.
firmware-bnx2x recommends no packages.
Versions of packages firmware-bnx2x suggests:
ii initramfs-tools 0.109.1
ii linux-image-3.2.0-4-amd64 [linux-image] 3.2.46-1
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
