Le samedi 23 mars 2013 à 22:10 +0100, Vincent Blut a écrit :
> Le 23/03/2013 18:58, Ben Hutchings a écrit :
> > On Fri, 2013-03-22 at 14:28 +0100, Vincent Blut wrote:
> >> Le jeudi 21 mars 2013 à 21:56 +0100, Vincent Blut a écrit :
> >>> Le jeudi 21 mars 2013 à 19:28 +0100, Vincent Blut a écrit :
> >>>> Package: src:linux
> >>>> Version: 3.8.3-1~experimental.1
> >>>> Severity: important
> >>>> Tags: upstream
> >>>>
> >>>> Hi,
> >>>>
> >>>> As mentioned in the subject, the following commit prevents me to resume
> >>>> from
> >>>> suspend in kernel ≥ 3.8.1:
> >>>>
> >>>> commit cace7c323ddde7358ab2f2390ece964c55f30330
> >>>> Author: Alan Cox <a...@linux.intel.com>
> >>>> Date: Fri Jan 25 10:28:15 2013 +1000
> >>>>
> >>>> fb: rework locking to fix lock ordering on takeover
> >>>>
> >>>> commit 50e244cc793d511b86adea24972f3a7264cae114 upstream.
> >>>>
> >>>> Adjust the console layer to allow a take over call where the caller
> >>>> already holds the locks. Make the fb layer lock in order.
> >>>>
> >>>> This is partly a band aid, the fb layer is terminally confused about
> >>>> the
> >>>> locking rules it uses for its notifiers it seems.
> >>>>
> >>>> [a...@linux-foundation.org: remove stray non-ascii char, tidy
> >>>> comment]
> >>>> [a...@linux-foundation.org: export do_take_over_console()]
> >>>> [airlied: cleanup another non-ascii char]
> >>>> Signed-off-by: Alan Cox <a...@linux.intel.com>
> >>>> Cc: Florian Tobias Schandinat <florianschandi...@gmx.de>
> >>>> Cc: Stephen Rothwell <s...@canb.auug.org.au>
> >>>> Cc: Jiri Kosina <jkos...@suse.cz>
> >>>> Tested-by: Sedat Dilek <sedat.di...@gmail.com>
> >>>> Reviewed-by: Daniel Vetter <daniel.vet...@ffwll.ch>
> >>>> Signed-off-by: Andrew Morton <a...@linux-foundation.org>
> >>>> Signed-off-by: Dave Airlie <airl...@redhat.com>
> >>>> Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
> >>>>
> >>>> I didn't try to boot with this commit reverted, and looking at its size,
> >>>> I fear there will be some conflict to solve before attempting to do so.
> >>>>
> >>>> I guess it could be interesting to try 3.9-rc. to see how it
> >>>> behaves (I didn't see what have been merged in this area in the last
> >>>> merge window). I might try to connect through ssh to see if I get a
> >>>> trace.
> >>> Same issue with 3.9-rc3, I'll try to find some time tomorrow in order to
> >>> get eventual stack traces.
> >> Some news here, the suspend/resume process is doing fine (I checked
> >> while connected via ssh), but what I didn't notice because I was in a
> >> dark room is that there is just no backlight.
> >>
> >> But I find a workaround, setting acpi_osi="!Windows 2012" in the kernel
> >> command line seems to inhibit the issue. I found this workaround
> >> accidentally because I need this parameter to make my brightness control
> >> working again (I reported this in #702188 btw).
> > So are these the same bug or two different bugs?
>
> Well they both touch the backlight area, have the same workaround, but
> the latter appears in a specific case: resume from suspend. I still have
> 3 revisions to test, hope that will give some clue.
Ok, my laptop is back to the business, I finished the bisection and I
have a completely different result from the first time:
commit 719429a54d9c: "drm/i915: write backlight harder"
I reverted it on top of 3.8.1, as expected that fixed the issue.
By the way it is reverted in the last drm pull request sent by Dave
Airlie.
I guess it'll be spread in stable‽
> >
> > In any case, please do not use the reportbug --no-bug-script option, as
> > the kernel bug script provides lots of useful information. You can get
> > that now by running:
> >
> > /usr/share/reportbug/handle_bugscript
> > /usr/share/bug/linux-image-3.8-trunk-amd64/script $FILE
> >
> > and sending us that output file.
>
> Hmm, I didn't use the '--no-bug-script' option explicitly, is that due
> to the fact I use the 'advanced' mode?
> Anyway I'll provide the output but that will have to wait a little bit
> because my power adapter
> died this afternoon :-(
Attached!
Thanks for your time,
Vincent
** Version:
Linux version 3.8-trunk-amd64 (debian-ker...@lists.debian.org) (gcc version
4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.8.3-1~experimental.1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.8-trunk-amd64
root=UUID=b9be2161-95bf-460d-a74f-fcf2c5cedcf9 ro pcie_aspm=force elevator=noop
i915.i915_enable_rc6=3 nmi_watchdog=0 i915.semaphores=1
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 1.670873] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled
[ 1.672630] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N
6235 AGN, REV=0xB0
[ 1.674434] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 1.674974] cfg80211: World regulatory domain updated:
[ 1.674975] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 1.674976] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1.674977] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1.674979] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 1.674980] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1.674981] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 1.678341] input: HDA Intel PCH HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 1.678419] input: HDA Intel PCH Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.678514] input: HDA Intel PCH Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.692326] [drm] Memory usable by graphics device = 2048M
[ 1.693698] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 1.693700] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing
generic driver
[ 1.695083] Console: switching to colour dummy device 80x25
[ 1.695559] i915 0000:00:02.0: setting latency timer to 64
[ 1.707237] rts5139: module is from the staging directory, the quality is
unknown, you have been warned.
[ 1.714258] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 1.714482] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 1.714576] usbcore: registered new interface driver rts5139
[ 1.714613] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00
PQ: 0 ANSI: 0 CCS
[ 1.715169] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 1.718471] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 1.719092] cfg80211: Calling CRDA for country: FR
[ 1.723260] cfg80211: Regulatory domain changed to country: FR
[ 1.723265] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 1.723268] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 1.723270] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 1.723273] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000
mBm)
[ 1.723275] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700
mBm)
[ 1.729768] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.748770] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 1.748778] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.748782] [drm] Driver supports precise vblank timestamp query.
[ 1.748833] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.860851] fbcon: inteldrmfb (fb0) is primary device
[ 1.916338] usb 4-1.5: New USB device found, idVendor=04f2, idProduct=b330
[ 1.916345] usb 4-1.5: New USB device strings: Mfr=3, Product=1,
SerialNumber=2
[ 1.916350] usb 4-1.5: Product: USB2.0 HD UVC WebCam
[ 1.916355] usb 4-1.5: Manufacturer: Chicony Electronics Co.,Ltd.
[ 1.916359] usb 4-1.5: SerialNumber: 200901010001
[ 1.942955] media: Linux media interface: v0.10
[ 1.972367] Linux video capture interface: v2.00
[ 1.995581] usb 4-1.6: new full-speed USB device number 4 using ehci-pci
[ 2.003431] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b330)
[ 2.009239] ACPI: Battery Slot [BAT0] (battery present)
[ 2.015066] input: USB2.0 HD UVC WebCam as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input9
[ 2.016212] usbcore: registered new interface driver uvcvideo
[ 2.016215] USB Video Class driver (1.1.1)
[ 2.027512] asus_wmi: Backlight controlled by ACPI video driver
[ 2.150992] psmouse serio4: elantech: assuming hardware version 4 (with
firmware version 0x361f02)
[ 2.163463] psmouse serio4: elantech: Synaptics capabilities query result
0x00, 0x15, 0x0e.
[ 2.225556] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio4/input/input10
[ 2.474873] usb 4-1.6: device not accepting address 4, error -32
[ 2.491515] hub 4-1:1.0: unable to enumerate USB device on port 6
[ 2.790737] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.892807] Console: switching to colour frame buffer device 240x67
[ 3.913735] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.913830] i915 0000:00:02.0: registered panic notifier
[ 3.930973] acpi device:27: registered as cooling_device4
[ 3.941041] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.941328] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[ 3.941879] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.324794] Adding 1952764k swap on /dev/sda3. Priority:-1 extents:1
across:1952764k SS
[ 4.355764] EXT4-fs (sda6): re-mounted. Opts: (null)
[ 4.415702] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,discard
[ 4.452082] loop: module loaded
[ 5.086051] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
discard
[ 5.097992] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 5.681174] RPC: Registered named UNIX socket transport module.
[ 5.686773] RPC: Registered udp transport module.
[ 5.692266] RPC: Registered tcp transport module.
[ 5.697733] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.708753] FS-Cache: Loaded
[ 5.715032] Key type dns_resolver registered
[ 5.728667] FS-Cache: Netfs 'nfs' registered for caching
[ 5.736266] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 6.512681] lp: driver loaded but no devices found
[ 6.517685] ppdev: user-space parallel port driver
[ 6.551601] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 6.560487] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
[ 6.963244] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 6.970093] iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
[ 7.195013] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7.252663] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.257877] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.392750] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input12
[ 101.987737] wlan0: authenticate with a0:21:b7:7d:eb:2c
[ 101.992092] wlan0: capabilities/regulatory prevented using AP HT/VHT
configuration, downgraded
[ 101.995268] wlan0: direct probe to a0:21:b7:7d:eb:2c (try 1/3)
[ 102.198739] wlan0: send auth to a0:21:b7:7d:eb:2c (try 2/3)
[ 102.402432] wlan0: send auth to a0:21:b7:7d:eb:2c (try 3/3)
[ 102.404357] wlan0: authenticated
[ 102.406425] wlan0: associate with a0:21:b7:7d:eb:2c (try 1/3)
[ 102.610078] wlan0: associate with a0:21:b7:7d:eb:2c (try 2/3)
[ 102.613623] wlan0: RX AssocResp from a0:21:b7:7d:eb:2c (capab=0x411 status=0
aid=1)
[ 102.632731] wlan0: associated
[ 102.632842] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: UX31A
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: UX31A.218
board_vendor: ASUSTeK COMPUTER INC.
board_name: UX31A
board_version: 1.0
** Loaded modules:
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
parport_pc
ppdev
lp
parport
binfmt_misc
uinput
nfsd
auth_rpcgss
nfs_acl
nfs
lockd
dns_resolver
fscache
sunrpc
nls_utf8
nls_cp437
vfat
fat
loop
joydev
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
videodev
media
arc4
coretemp
rts5139(C)
kvm_intel
kvm
crc32c_intel
snd_hda_codec_hdmi
iwldvm
ghash_clmulni_intel
aesni_intel
aes_x86_64
mac80211
iTCO_wdt
ablk_helper
cryptd
xts
asus_nb_wmi
lrw
i915
gf128mul
snd_hda_codec_realtek
asus_wmi
iTCO_vendor_support
sparse_keymap
iwlwifi
pcspkr
psmouse
serio_raw
evdev
snd_hda_intel
snd_hda_codec
microcode
snd_hwdep
i2c_i801
snd_pcm
cfg80211
snd_page_alloc
snd_seq
rfkill
snd_seq_device
snd_timer
wmi
battery
ac
lpc_ich
mfd_core
video
drm_kms_helper
snd
drm
i2c_algo_bit
button
i2c_core
acpi_cpufreq
mperf
soundcore
mei
processor
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
ahci
libahci
libata
thermal
scsi_mod
thermal_sys
ehci_pci
xhci_hcd
ehci_hcd
usbcore
usb_common
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether c4:85:08:11:0f:b2 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.2/28 brd 192.168.1.15 scope global wlan0
inet6 fe80::c685:8ff:fe11:fb2/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 1312 20 0 0 0 0 0 0 1312
20 0 0 0 0 0 0
wlan0: 698246 1012 0 0 0 0 0 0 165932
1175 0 0 0 0 0 0
*** Protocol statistics:
Ip:
1040 total packets received
0 forwarded
0 incoming packets discarded
1039 incoming packets delivered
1166 requests sent out
4 dropped because of missing route
Icmp:
8 ICMP messages received
0 input ICMP message failed.
Histogramme d'entrée ICMP
destination unreachable: 8
8 ICMP messages sent
0 ICMP messages failed
Histogramme de sortie ICMP
destination unreachable: 8
IcmpMsg:
InType3: 8
OutType3: 8
Tcp:
130 active connections openings
0 passive connection openings
2 failed connection attempts
1 connection resets received
84 connections established
893 segments received
994 segments send out
23 segments retransmited
41 bad segments received.
6 resets sent
Udp:
132 packets received
8 packets to unknown port received.
0 packet receive errors
141 packets sent
UdpLite:
TcpExt:
63 delayed acks sent
Quick ack mode was activated 7 times
303 packet headers predicted
112 acknowledgments not containing data payload received
10 predicted acknowledgments
3 congestion windows recovered without slow start by DSACK
7 congestion windows recovered without slow start after partial ack
16 other TCP timeouts
5 DSACKs sent for old packets
6 DSACKs received
1 connections reset due to unexpected data
1 connections reset due to early user close
TCPSackShiftFallback: 1
TCPRcvCoalesce: 125
TCPOFOQueue: 55
TCPChallengeACK: 41
TCPSYNChallenge: 41
IpExt:
InNoRoutes: 1
InMcastPkts: 14
OutMcastPkts: 16
InOctets: 688182
OutOctets: 122346
InMcastOctets: 3357
OutMcastOctets: 3437
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM
Controller [8086:0154] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core
processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:04.0 Signal processing controller [1180]: Intel Corporation Device
[8086:0153] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfe08000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7d22000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d20000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f7d18000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d1f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC
Controller [8086:1e59] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family
6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 43
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d1e000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d1d000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 7 Series/C210
Series Chipset Family Thermal Management Controller [8086:1e24] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f7d1c000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235
[8086:088e] (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Card reader
Bus 004 Device 003: ID 04f2:b330 Chicony Electronics Co., Ltd
