Package: hplip
Version: 3.13.3-1
Severity: normal
Hi.
I've tested the experimental version, and cannot setup a new printer :
$ hp-setup
HP Linux Imaging and Printing System (ver. 3.13.3)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Searching... (bus=net, timeout=5, ttl=4, search=(None) desc=0, method=mdns)
error: No PPD found for model photosmart_6510 using old algorithm.
error: No appropriate print PPD file found for model photosmart_6510_series
Hope this helps.
Best regards,
-- Package-specific info:
Saving output in log file: /home/olivier/hp-check.log
HP Linux Imaging and Printing System (ver. 3.13.3)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies are installed to
successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: debian-7.0 version is not supported. Using debian-6.0.6 versions
dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.2.0-4-amd64 #1 SMP Debian 3.2.39-2 GNU/Linux
Host: jonsnow
Proc: 3.2.0-4-amd64 #1 SMP Debian 3.2.39-2 GNU/Linux
Distribution: debian 7.0
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.13.3
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian
distro 7.0 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.13.3
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
bin=/usr/bin
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.13.3
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[upgrade]
latest_available_version = 3.13.3
notify_upgrade = false
last_upgraded_time = 1363278925.49265
pending_upgrade_time = 0
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hp:/net/Photosmart_6510_series?ip=192.168.3.150"
printer_name = Photosmart_6510
working_dir = .
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[installation]
date_time = 03/24/13 16:42:23
version = 3.13.3
<Package-name> <Package-Desc> <Required/Optional> <Min-Version>
<Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
gs Ghostscript REQUIRED 7.05
9.05 OK -
network Network-wget OPTIONAL -
1.14 OK -
error: dbus DBus REQUIRED -
1.6.8 MISSING 'DBUS may not be installed or not running'
scanimage Shell-Scanning OPTIONAL 1.0
1.0.22 OK -
policykit Admin-Policy-framework OPTIONAL -
0.105 OK -
xsane SANE-GUI OPTIONAL 0.9
0.998 OK -
error: cups CUPS REQUIRED 1.1
- INCOMPAT 'CUPS may not be installed or not running'
-------------------------
| General Dependencies |
-------------------------
reportlab Python-PDF-Lib OPTIONAL 2.0
2.5 OK -
libcrypto OpenSSL-Crypto-Lib REQUIRED -
1.0.1 OK -
pil Python-Image-Lib OPTIONAL -
1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0
4.9.3 OK -
error: libjpeg JPEG-Lib REQUIRED -
- MISSING 'libjpeg needs to be installed'
libpthread POSIX-Threads-Lib REQUIRED -
2.13 OK -
python-dbus Python-DBUS REQUIRED 0.80.0
1.1.1 OK -
python-devel Python-SDK REQUIRED 2.2
2.7.3 OK -
pyqt4 Python-Qt4 REQUIRED 4.0
4.9.3 OK -
error: cups-devel CUPS-SDK REQUIRED -
- MISSING 'cups-devel needs to be installed'
error: sane-devel SANE-SDK REQUIRED -
- MISSING 'sane-devel needs to be installed'
error: libusb USB-Lib REQUIRED -
1.0 MISSING 'libusb needs to be installed'
sane Scan-Lib REQUIRED -
- OK -
error: cups-image CUPS-Image-Lib REQUIRED -
- MISSING 'cups-image needs to be installed'
error: libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9
5.4.3 MISSING 'libnetsnmp-devel needs to be installed'
python-xml Python-XML-Lib REQUIRED -
2.1.0 OK -
python-notify Desktop-notifications OPTIONAL -
- OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED -
3.13.3 OK -
pcardext PhotoCard-Extension REQUIRED -
3.13.3 OK -
hpmudext IO-Extension REQUIRED -
3.13.3 OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED -
3.13.3 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED -
3.13.3 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
lpstat
------
Type: Unknown
Device URI: No destinations added.
--------------
| PERMISSION |
--------------
groups user-groups Required - -
OK olivier disk lp dialout cdrom floppy sudo audio dip video plugdev
bluetooth lpadmin netdev libvirt
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libcups2' package is missing/incompatible
error: 'libjpeg62-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libcupsimage2' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
None
Total Errors: 8
Total Warnings: 0
Re-run 'hp-doctor' command to prompt and fix the issues.
Done.
-- System Information:
Debian Release: 7.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages hplip depends on:
ii adduser 3.113+nmu3
ii coreutils 8.20-3
ii cups 1.5.3-2.16
ii hplip-data 3.13.3-1
ii libc6 2.13-38
ii libcups2 1.5.3-2.16
ii libdbus-1-3 1.6.8-1
ii libhpmud0 3.13.3-1
ii libsane 1.0.22-7.4
ii libsane-hpaio 3.13.3-1
ii libsnmp15 5.4.3~dfsg-2.7
ii libssl1.0.0 1.0.1e-2
ii libusb-1.0-0 2:1.0.12-2
ii lsb-base 4.1+Debian9
ii policykit-1 0.105-3
ii printer-driver-hpcups 3.13.3-1
ii python 2.7.3-4
ii python-dbus 1.1.1-1
ii python-gobject-2 2.28.6-11
ii python-imaging 1.1.7-4
ii python-pexpect 2.4-1
ii python-reportlab 2.5-1.1
ii wget 1.14-1
Versions of packages hplip recommends:
ii avahi-daemon 0.6.31-2
ii printer-driver-postscript-hp 3.13.3-1
ii sane-utils 1.0.22-7.4
Versions of packages hplip suggests:
pn hplip-doc <none>
ii hplip-gui 3.12.6-3.1
ii python-notify 0.1.1-3
ii system-config-printer 1.3.7-4
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
