Package: xsane
Version: 0.998-4
Severity: important
First tiume run - everything works as it should.
Second time -
Long delay ( a full min?) - then Errors out with an error dialog:
"Failed to obtain value of option top-edge:Error during device I/O"
Once this error has occured, stopping the program and restarting will
no longer show the scansnap on the device dialog despite being shown
via sane-find-scanner - YET removing ~/.sane
won't return the scanner - I have to power-cycle the scanner
(I think this is a secondary problem? Or is this a problem
with correctly closing the usb? )
Restarting the scanner has no effect.
Deleting the ~./sanve directory - restarting the scanner corrects the problem.
This failed in stable - wheezey and now unstable.
The first time it is run after removing the .sane directory everythting works
fine.
The secondary error of not finding the device may be related to this bug:
https://alioth.debian.org/tracker/index.php?func=detail&aid=314107&group_id=30186&atid=410366
I've recreated this error on a second scanner.
I could find no way to get firmware information via sane-util ?
I can LEND a scanner if needed to fix this bug. I would pay shipping both ways.
This is where is hangs and errors:
[fujitsu] send_lut: 0 0.000000 0 0.250000 -0.500000
[fujitsu] do_usb_cmd: start
After the error:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 3.02
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Information:
Debian Release: 7.0
APT prefers testing
APT policy: (990, 'testing'), (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xsane depends on:
ii libatk1.0-0 2.4.0-2
ii libc6 2.13-38
ii libcairo2 1.12.2-3
ii libfontconfig1 2.9.0-7.1
ii libfreetype6 2.4.9-1.1
ii libgdk-pixbuf2.0-0 2.26.1-1
ii libgimp2.0 2.8.2-2
ii libglib2.0-0 2.33.12+really2.32.4-5
ii libgtk2.0-0 2.24.10-2
ii libjpeg8 8d-1
ii liblcms1 1.19.dfsg-1.2
ii libpango1.0-0 1.30.0-1
ii libpng12-0 1.2.49-1
ii libsane 1.0.22-7.4
ii libtiff4 3.9.6-11
ii xsane-common 0.998-4
ii zlib1g 1:1.2.7.dfsg-13
Versions of packages xsane recommends:
ii cups-client 1.5.3-2.15
ii iceweasel [www-browser] 19.0.2-1~bpo60+1
ii konqueror [www-browser] 4:4.8.4-2
ii lynx-cur [www-browser] 2.8.8dev.12-2
ii w3m [www-browser] 0.5.3-8
Versions of packages xsane suggests:
ii gimp 2.8.2-2
ii gocr 0.49-1
ii gv 1:3.7.3-1
ii hylafax-client 3:6.0.6-5
-- no debconf information
karl@singapore:~$ xscreensaver-
xscreensaver-getimage xscreensaver-getimage-file
xscreensaver-getimage-video xscreensaver-gl-helper xscreensaver-text
karl@singapore:~$ xscreensaver
bash: xscreensaver: command not found
karl@singapore:~$ xscreensaver-
xscreensaver-getimage xscreensaver-getimage-file
xscreensaver-getimage-video xscreensaver-gl-helper xscreensaver-text
karl@singapore:~$ man xscreensaver-text
karl@singapore:~$ cd /usr/share/doc/xscreensaver-
xscreensaver-data/ xscreensaver-data-extra/
xscreensaver-gl/ xscreensaver-gl-extra/
xscreensaver-screensaver-bsod/ xscreensaver-screensaver-webcollage/
karl@singapore:~$ cd /usr/share/doc/xscreensaver-data
karl@singapore:/usr/share/doc/xscreensaver-data$ ls
changelog.Debian.gz copyright
karl@singapore:/usr/share/doc/xscreensaver-data$ xscreensaver-demo
X error in braid:
karl@singapore:/usr/share/doc/xscreensaver-data$ xsane
karl@singapore:/usr/share/doc/xscreensaver-data$ xsane
Killed
karl@singapore:/usr/share/doc/xscreensaver-data$ gdb xsane
GNU gdb (GDB) 7.4.1-debian
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/xsane...(no debugging symbols found)...done.
(gdb) quit
karl@singapore:/usr/share/doc/xscreensaver-data$ man gdb
karl@singapore:/usr/share/doc/xscreensaver-data$ gdb xsane
GNU gdb (GDB) 7.4.1-debian
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/xsane...(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/xsane
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7fffe4a6a700 (LWP 7994)]
[Thread 0x7fffe4a6a700 (LWP 7994) exited]
[Inferior 1 (process 7989) exited normally]
(gdb) quit
karl@singapore:/usr/share/doc/xscreensaver-data$ gdb xsane
GNU gdb (GDB) 7.4.1-debian
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/bin/xsane...(no debugging symbols found)...done.
(gdb) run
Starting program: /usr/bin/xsane
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7fffe4a6a700 (LWP 8020)]
^C
Program received signal SIGINT, Interrupt.
0x00007ffff357ce33 in *__GI___poll (fds=<optimized out>, nfds=<optimized out>,
timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:87
87 ../sysdeps/unix/sysv/linux/poll.c: No such file or directory.
(gdb) quit
A debugging session is active.
Inferior 1 [process 8015] will be killed.
Quit anyway? (y or n) y
karl@singapore:/usr/share/doc/xscreensaver-data$ cd
karl@singapore:~$ rm .sane/ -rf
karl@singapore:~$ xsane
karl@singapore:~$ xsane
karl@singapore:~$ xsane
karl@singapore:~$ wajig list sane
ii libksane0 4:4.8.4-1
amd64 scanner library (runtime)
ii libksane-data 4:4.8.4-1
all scanner library (data files)
ii libsane:amd64 1.0.22-7.4
amd64 API library for scanners
ii libsane-common 1.0.22-7.4
amd64 API library for scanners -- documentation and support files
ii libsane-extras:amd64 1.0.22.2
amd64 API library for scanners -- extra backends
ii libsane-extras-common 1.0.22.2
amd64 API library for scanners -- documentation and support files
ii libsane-hpaio 3.12.6-3.1
amd64 HP SANE backend for multi-function peripherals
ii libsane-perl 0.05-2
amd64 Perl bindings for the SANE (Scanner Access Now Easy) Project
ii libwine-sane 1.0.1-3.1
amd64 Windows API implementation - scanner module
ii sane 1.0.14-9
amd64 scanner graphical frontends
ii sane-utils 1.0.22-7.4
amd64 API library for scanners -- utilities
ii xsane 0.998-4
amd64 featureful graphical frontend for SANE (Scanner Access Now Easy)
ii xsane-common 0.998-4
all featureful graphical frontend for SANE (Scanner Access Now Easy)
karl@singapore:~$ rm .sane
rm: cannot remove `.sane': Is a directory
karl@singapore:~$ rm .sane -rf
karl@singapore:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04c5, product=0x1155) at libusb:003:011
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
karl@singapore:~$ xsane
karl@singapore:~$ xsane
karl@singapore:~$ xsane
karl@singapore:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04c5, product=0x1155) at libusb:003:011
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
karl@singapore:~$ xsane
karl@singapore:~$ xsane
karl@singapore:~$ export SANE_DEBUG_FUJITSU=15
karl@singapore:~$ xsane
[sanei_debug] Setting debug level of fujitsu to 15.
[fujitsu] sane_init: start
[fujitsu] sane_init: fujitsu backend 1.0.106, from sane-backends 1.0.22
[fujitsu] sane_init: finish
[fujitsu] sane_get_devices: start
[fujitsu] sane_get_devices: reading config file fujitsu.conf
[fujitsu] sane_get_devices: setting "buffer-size" to 65536
[fujitsu] sane_get_devices: looking for 'scsi FUJITSU'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1041'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1042'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1078'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1095'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1096'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1097'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ad'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10ae'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10af'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10cf'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e6'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10e7'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x10fe'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1135'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114a'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x114f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1150'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1155'
[fujitsu] attach_one: start
[fujitsu] attach_one: looking for 'libusb:003:013'
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] init_inquire: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_inquire: Found FUJITSU scanner ScanSnap S510 version 0A00 at
libusb:003:013
[fujitsu] inquiry options
[fujitsu] color offset: 0 lines
[fujitsu] long gray scan: 1
[fujitsu] long color scan: 1
[fujitsu] emulation mode: 0
[fujitsu] CMP/CGA: 0
[fujitsu] background back: 0
[fujitsu] background front: 0
[fujitsu] background fb: 0
[fujitsu] back only scan: 1
[fujitsu] duplex offset: 0 lines
[fujitsu] init_inquire: finish
[fujitsu] init_vpd: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_vpd: length=5f
[fujitsu] standard options
[fujitsu] basic x res: 600 dpi
[fujitsu] basic y res: 600 dpi
[fujitsu] step x res: 1 dpi
[fujitsu] step y res: 1 dpi
[fujitsu] max x res: 600 dpi
[fujitsu] max y res: 600 dpi
[fujitsu] min x res: 50 dpi
[fujitsu] min y res: 50 dpi
[fujitsu] 60 dpi: 1
[fujitsu] 75 dpi: 1
[fujitsu] 100 dpi: 1
[fujitsu] 120 dpi: 1
[fujitsu] 150 dpi: 1
[fujitsu] 160 dpi: 1
[fujitsu] 180 dpi: 1
[fujitsu] 200 dpi: 1
[fujitsu] 240 dpi: 1
[fujitsu] 300 dpi: 1
[fujitsu] 320 dpi: 1
[fujitsu] 400 dpi: 1
[fujitsu] 480 dpi: 1
[fujitsu] 600 dpi: 1
[fujitsu] 800 dpi: 0
[fujitsu] 1200 dpi: 0
[fujitsu] max width: 8.71 inches
[fujitsu] max length: 34.00 inches
[fujitsu] overflow: 1
[fujitsu] monochrome: 1
[fujitsu] halftone: 1
[fujitsu] grayscale: 1
[fujitsu] color_monochrome: 0
[fujitsu] color_halftone: 0
[fujitsu] color_grayscale: 1
[fujitsu] vendor options
[fujitsu] adf: 1
[fujitsu] flatbed: 0
[fujitsu] transparency: 0
[fujitsu] duplex: 1
[fujitsu] back endorser: 0
[fujitsu] barcode: 0
[fujitsu] operator panel: 1
[fujitsu] front endorser: 0
[fujitsu] multi-purpose stacker: 0
[fujitsu] unused caps: 0
[fujitsu] A/D bits: 10
[fujitsu] buffer bytes: 16777216
[fujitsu] mode_sense_10 cmd: 0
[fujitsu] mode_select_10 cmd: 0
[fujitsu] log_sense cmd: 0
[fujitsu] log_select cmd: 0
[fujitsu] change cmd: 0
[fujitsu] read_buffer cmd: 0
[fujitsu] write_buffer cmd: 0
[fujitsu] copy_and_verify cmd: 0
[fujitsu] compare cmd: 0
[fujitsu] get_d_b_status cmd: 0
[fujitsu] object_pos cmd: 1
[fujitsu] send cmd: 1
[fujitsu] read cmd: 1
[fujitsu] get_window cmd: 0
[fujitsu] set_window cmd: 1
[fujitsu] send_diag cmd: 1
[fujitsu] read_diag cmd: 1
[fujitsu] scan cmd: 1
[fujitsu] mode_sense_6 cmd: 1
[fujitsu] copy cmd: 0
[fujitsu] release cmd: 1
[fujitsu] reserve_unit cmd: 1
[fujitsu] mode_select_6 cmd: 1
[fujitsu] inquiry cmd: 1
[fujitsu] request_sense cmd: 1
[fujitsu] test_unit_ready cmd: 1
[fujitsu] subwindow cmd: 0
[fujitsu] endorser cmd: 0
[fujitsu] hardware status cmd: 1
[fujitsu] scanner control cmd: 1
[fujitsu] brightness steps: 0
[fujitsu] threshold steps: 255
[fujitsu] contrast steps: 0
[fujitsu] built in gamma patterns: 0
[fujitsu] download gamma patterns: 1
[fujitsu] built in dither patterns: 4
[fujitsu] download dither patterns: 1
[fujitsu] RIF: 1
[fujitsu] DTC (AutoI): 0
[fujitsu] SDTC (AutoII): 1
[fujitsu] outline extraction: 0
[fujitsu] image emphasis: 1
[fujitsu] automatic separation: 0
[fujitsu] mirror image: 0
[fujitsu] white level follower: 0
[fujitsu] subwindow: 0
[fujitsu] diffusion: 1
[fujitsu] ipc3: 0
[fujitsu] rotation: 0
[fujitsu] compression MH: 0
[fujitsu] compression MR: 0
[fujitsu] compression MMR: 0
[fujitsu] compression JBIG: 0
[fujitsu] compression JPG1: 1
[fujitsu] (Disabled)
[fujitsu] compression JPG2: 0
[fujitsu] compression JPG3: 0
[fujitsu] back endorser mech: 0
[fujitsu] back endorser stamp: 0
[fujitsu] back endorser elec: 0
[fujitsu] endorser max id: 0
[fujitsu] front endorser mech: 0
[fujitsu] front endorser stamp: 0
[fujitsu] front endorser elec: 0
[fujitsu] back endorser type: 0
[fujitsu] back endorser type: 0
[fujitsu] init_vpd: finish
[fujitsu] init_ms: start
[fujitsu] unknown: 0
[fujitsu] prepick: 0
[fujitsu] sleep: 1
[fujitsu] duplex: 0
[fujitsu] rand: 0
[fujitsu] bg: 0
[fujitsu] df: 1
[fujitsu] dropout: 1
[fujitsu] buff: 0
[fujitsu] auto: 1
[fujitsu] lamp: 0
[fujitsu] jobsep: 0
[fujitsu] init_ms: finish
[fujitsu] init_model: start
[fujitsu] init_model: finish
[fujitsu] init_user: start
[fujitsu] init_user: finish
[fujitsu] init_options: start
[fujitsu] init_options: finish
[fujitsu] init_interlace: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=600
[fujitsu] update_params: y: max=40800, page=13200, gph=13200, res=600
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=5100, Bpl=15300, lines=6600
[fujitsu] update_params: params: format=1, depth=8, last=1
[fujitsu] update_params: finish
[fujitsu] init_interlace: not 1
[fujitsu] init_interlace: color_interlace: 2
[fujitsu] init_interlace: finish
[fujitsu] init_serial: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] init_serial: found sn 46112
[fujitsu] init_serial: serial_name: ScanSnap S510:46112
[fujitsu] init_serial: finish
[fujitsu] disconnect_fd: start
[fujitsu] disconnecting usb device
[fujitsu] disconnect_fd: finish
[fujitsu] attach_one: finish
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x116f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1174'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1175'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1176'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1177'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x1178'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119d'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119e'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x119f'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a0'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11a2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11ee'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11ef'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f1'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f2'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f3'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11f4'
[fujitsu] sane_get_devices: looking for 'usb 0x04c5 0x11fc'
[fujitsu] sane_get_devices: found scanner libusb:003:013
[fujitsu] sane_get_devices: found 1 scanner(s)
[fujitsu] sane_get_devices: finish
[fujitsu] sane_open: start
[fujitsu] sane_open: searching currently attached scanners
[fujitsu] sane_open: device ScanSnap S510:46112 requested
[fujitsu] sane_open: device ScanSnap S510:46112 found
[fujitsu] connect_fd: start
[fujitsu] connect_fd: opening USB device
[fujitsu] wait_scanner: start
[fujitsu] do_usb_cmd: start
[fujitsu] do_usb_cmd: finish
[fujitsu] wait_scanner: finish
[fujitsu] connect_fd: finish
[fujitsu] sane_open: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] sane_get_parameters: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=600
[fujitsu] update_params: y: max=40800, page=13200, gph=13200, res=600
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=5096, Bpl=637, lines=6600
[fujitsu] update_params: params: format=0, depth=1, last=1
[fujitsu] update_params: finish
[fujitsu] sane_get_parameters: finish
[fujitsu] send_lut: start
[fujitsu] send_lut: 0 0.000000 0 0.250000 -0.500000
[fujitsu] do_usb_cmd: start
[fujitsu] out: return error 'Error during device I/O'
[fujitsu] send_lut: finish
[fujitsu] send_lut: start
[fujitsu] send_lut: 0 0.000000 0 0.250000 -0.500000
[fujitsu] do_usb_cmd: start
[fujitsu] out: return error 'Error during device I/O'
[fujitsu] send_lut: finish
[fujitsu] mode_select_auto: start
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] mode_select_auto: finish
[fujitsu] mode_select_df: start
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] mode_select_df: finish
[fujitsu] mode_select_dropout: start
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] mode_select_dropout: finish
[fujitsu] set_sleep_mode: start
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] set_sleep_mode: finish
[fujitsu] send_lut: start
[fujitsu] send_lut: 0 0.000000 0 0.250000 -0.500000
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] send_lut: finish
[fujitsu] send_lut: start
[fujitsu] send_lut: 0 0.000000 0 0.250000 -0.500000
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] send_lut: finish
[fujitsu] mode_select_auto: start
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] mode_select_auto: finish
[fujitsu] mode_select_df: start
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] mode_select_df: finish
[fujitsu] mode_select_dropout: start
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] mode_select_dropout: finish
[fujitsu] set_sleep_mode: start
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] set_sleep_mode: finish
[fujitsu] sane_get_parameters: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=50
[fujitsu] update_params: y: max=40800, page=13200, gph=13200, res=50
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=424, Bpl=53, lines=550
[fujitsu] update_params: params: format=0, depth=1, last=1
[fujitsu] update_params: finish
[fujitsu] sane_get_parameters: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: running
[fujitsu] get_hardware_status: calling ghs
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] sane_get_parameters: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=50
[fujitsu] update_params: y: max=40800, page=13200, gph=13200, res=50
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=424, Bpl=53, lines=550
[fujitsu] update_params: params: format=0, depth=1, last=1
[fujitsu] update_params: finish
[fujitsu] sane_get_parameters: finish
[fujitsu] sane_get_parameters: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=50
[fujitsu] update_params: y: max=40800, page=13200, gph=13200, res=50
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=424, Bpl=53, lines=550
[fujitsu] update_params: params: format=0, depth=1, last=1
[fujitsu] update_params: finish
[fujitsu] sane_get_parameters: finish
[fujitsu] sane_get_parameters: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=50
[fujitsu] update_params: y: max=40800, page=13200, gph=13200, res=50
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=424, Bpl=53, lines=550
[fujitsu] update_params: params: format=0, depth=1, last=1
[fujitsu] update_params: finish
[fujitsu] sane_get_parameters: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: running
[fujitsu] get_hardware_status: calling ghs
[fujitsu] do_usb_cmd: start
[fujitsu] cmd: wrong size 31/0
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] get_hardware_status: start
[fujitsu] get_hardware_status: finish
[fujitsu] sane_get_parameters: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=50
[fujitsu] update_params: y: max=40800, page=13200, gph=13200, res=50
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=424, Bpl=53, lines=550
[fujitsu] update_params: params: format=0, depth=1, last=1
[fujitsu] update_params: finish
[fujitsu] sane_get_parameters: finish
[fujitsu] sane_get_parameters: start
[fujitsu] update_params: start
[fujitsu] update_params: x: max=10448, page=10200, gpw=10200, res=50
[fujitsu] update_params: y: max=40800, page=13200, gph=13200, res=50
[fujitsu] update_params: area: tlx=0, brx=10200, tly=0, bry=13200
[fujitsu] update_params: params: ppl=424, Bpl=53, lines=550
[fujitsu] update_params: params: format=0, depth=1, last=1
[fujitsu] update_params: finish
[fujitsu] sane_get_parameters: finish
