I got a couple of kernel errors, I'm attaching here. I don't know if they're related, but I thought they might be helpful. I also tried using a live CD with Mageia to see if it suspends with a different distribution, but there is no "suspend" option, and it crashes a lot so I couldn't try from the command line. I'm trying with a Fedora live CD to see if I have better results. Anything else I should be trying?
On Sun, Feb 17, 2013 at 8:52 AM, Daniel <ddsh...@hotmail.com> wrote: > > > > On Sat, Feb 16, 2013 at 5:30 PM, Ben Hutchings <b...@decadent.org.uk>wrote: > >> On Sat, 2013-02-16 at 12:40 -0600, Daniel wrote: >> > Not sure if I'm doing this right, but I'm reporting the results here. >> > >> > >> > On Thu, Feb 14, 2013 at 9:25 PM, Ben Hutchings <b...@decadent.org.uk> >> > wrote: >> > On Thu, 2013-02-14 at 08:27 -0600, Daniel wrote: >> > > >> > > >> > > >> > > On Wed, Feb 13, 2013 at 11:28 PM, Ben Hutchings >> > <b...@decadent.org.uk> >> > > wrote: >> > > Control: tag -1 moreinfo >> > > >> > > On Wed, 2013-02-13 at 11:59 -0600, ddshore wrote: >> > > > Package: linux-base >> > > > Version: 3.4~bpo60+1 >> > > > Severity: normal >> > > > >> > > > After suspending the laptop, and attempting to >> > resume, I get >> > > a black screen >> > > > with the power and wifi icons turned on. I have >> > tried using >> > > different versions >> > > > of the Linux Kernel, >> > > >> > > >> > > Which versions? >> > > >> > > >> > > 2.6.32-5-686 and 3.2.0.0.bpo.4-rt-686-pae >> > >> > >> > Could you also try 3.7-trunk-686-pae, from the experimental >> > suite? >> > >> > >> > Done, I just installed it without doing anything else (it mentioned >> > that it may be missing some drivers). >> > I still have the same error. Should I try anything else? The dmesg, >> > or something like that? >> >> dmesg from after boot would be helpful. >> >> Attached, dmesg after a regular reboot. > > >> Maybe the DSDT would also provide useful information. Install acpidump, >> run 'acpidump -t DSDT > dsdt.dump' (as root), and attach dsdt.dump. >> > [...] >> > > Now that you mention it, the guys at #linux had noticed something wrong > with my dsdt tables, but I cannot remember what it was. > Im not attaching a dmesg after a suspend (unless you want me to). The > first dmesgs from my bug report where after a suspend, but not with the > newest kernel. > From what you have seen now, where do we stand? Do you think this is > something that is fixable through some changes in configuration, or a more > complex problem? > > > OK, so I tried: >> > echo freezer > /sys/power/pm_test >> > echo mem > /sys/power/state >> > >> > >> > echo devices > /sys/power/pm_test >> > echo mem > /sys/power/state >> > >> > >> > echo platform > /sys/power/pm_test >> > echo mem > /sys/power/state >> > >> > >> > echo processors > /sys/power/pm_test >> > echo mem > /sys/power/state >> > >> > >> > echo core > /sys/power/pm_test >> > >> > >> > echo mem > /sys/power/state >> > >> > >> > For all of them, I get this: >> > ata1: softreset failed (device not ready) >> > ata2: softreset failed (device not ready) >> > >> > >> > >> > But it always comes back to live. Am I doing it right? >> > I can't find if there is a log file that contains the results of these >> > tests. >> >> There's no special log. This suggests that the kernel is mostly doing >> the right thing, but something goes wrong with the last stage where the >> kernel calls the BIOS to power-off most of the system. >> >> Ben. >> >> -- >> Ben Hutchings >> Computers are not intelligent. They only think they are. > > >
Kernel failure message 1: ------------[ cut here ]------------ WARNING: at /build/buildd-linux_3.7.8-1~experimental.1-i386-adxY04/linux-3.7.8/net/sched/sch_generic.c:255 dev_watchdog+0xae/0x111() Hardware name: Compaq Presario CQ61 NoteBook PC NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out Modules linked in: ipheth nls_utf8 isofs udf crc_itu_t cpufreq_powersave cpufreq_userspace cpufreq_stats cpufreq_conservative parport_pc ppdev lp parport bridge stp bnep rfcomm uinput binfmt_misc fuse appletalk ipx p8022 psnap llc p8023 rose netrom ax25 loop snd_hda_codec_hdmi joydev snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq acpi_cpufreq mperf snd_timer snd_seq_device kvm radeon arc4 snd ath9k mac80211 ath9k_common ath9k_hw ath ttm sp5100_tco tpm_tis tpm uvcvideo drm_kms_helper drm videobuf2_core videodev media videobuf2_vmalloc videobuf2_memops btusb i2c_algo_bit i2c_piix4 psmouse i2c_core cfg80211 bluetooth hp_wmi k10temp soundcore tpm_bios sparse_keymap snd_page_alloc evdev microcode pcspkr serio_raw video wmi shpchp battery ac button rfkill crc16 processor ext3 jbd mbcache sg sr_mod sd_mod cdrom crc_t10dif ohci_hcd ahci libahci thermal thermal_sys ehci_hcd libata r8169 mii scsi_mod usbcore usb_common Pid: 0, comm: swapper/0 Not tainted 3.7-trunk-686-pae #1 Debian 3.7.8-1~experimental.1 Call Trace: [<c10310a9>] ? warn_slowpath_common+0x68/0x79 [<c1255d71>] ? dev_watchdog+0xae/0x111 [<c1031122>] ? warn_slowpath_fmt+0x29/0x2d [<c1255d71>] ? dev_watchdog+0xae/0x111 [<c1255cc3>] ? netif_tx_lock+0x5d/0x5d [<c103b32a>] ? call_timer_fn+0x20/0xb6 [<c1255cc3>] ? netif_tx_lock+0x5d/0x5d [<c103c2cf>] ? run_timer_softirq+0x15d/0x198 [<c1037107>] ? __do_softirq+0x90/0x192 [<c1037077>] ? perf_trace_irq_handler_entry+0xd7/0xd7 <IRQ> [<c10372b7>] ? irq_exit+0x32/0x7d [<c1022fa9>] ? smp_apic_timer_interrupt+0x5b/0x65 [<c12e9228>] ? apic_timer_interrupt+0x34/0x3c [<c1028e7d>] ? native_safe_halt+0x2/0x3 [<f82d1221>] ? arch_safe_halt+0x5/0x7 [processor] [<f82d181f>] ? acpi_safe_halt+0x1e/0x2f [processor] [<f82d189e>] ? acpi_idle_enter_c1+0x4e/0x91 [processor] [<c122ebb6>] ? cpuidle_enter+0xb/0xe [<c122ef41>] ? cpuidle_enter_state+0x9/0x33 [<c122f016>] ? cpuidle_idle_call+0xab/0x146 [<c10114d7>] ? cpu_idle+0x88/0xac [<c1466970>] ? start_kernel+0x33e/0x343 ---[ end trace 8d4788fda9715e8a ]---
Kernel failure message 1: NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out Modules linked in: ipheth nls_utf8 isofs udf crc_itu_t cpufreq_powersave cpufreq_userspace cpufreq_stats cpufreq_conservative parport_pc ppdev lp parport bridge stp bnep rfcomm uinput binfmt_misc fuse appletalk ipx p8022 psnap llc p8023 rose netrom ax25 loop snd_hda_codec_hdmi joydev snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq acpi_cpufreq mperf snd_timer snd_seq_device kvm radeon arc4 snd ath9k mac80211 ath9k_common ath9k_hw ath ttm sp5100_tco tpm_tis tpm uvcvideo drm_kms_helper drm videobuf2_core videodev media videobuf2_vmalloc videobuf2_memops btusb i2c_algo_bit i2c_piix4 psmouse i2c_core cfg80211 bluetooth hp_wmi k10temp soundcore tpm_bios sparse_keymap snd_page_alloc evdev microcode pcspkr serio_raw video wmi shpchp battery ac button rfkill crc16 processor ext3 jbd mbcache sg sr_mod sd_mod cdrom crc_t10dif ohci_hcd ahci libahci thermal thermal_sys ehci_hcd libata r8169 mii scsi_mod usbcore usb_common Pid: 0, comm: swapper/0 Not tainted 3.7-trunk-686-pae #1 Debian 3.7.8-1~experimental.1 Call Trace: [<c10310a9>] ? warn_slowpath_common+0x68/0x79 [<c1255d71>] ? dev_watchdog+0xae/0x111 [<c1031122>] ? warn_slowpath_fmt+0x29/0x2d [<c1255d71>] ? dev_watchdog+0xae/0x111 [<c1255cc3>] ? netif_tx_lock+0x5d/0x5d [<c103b32a>] ? call_timer_fn+0x20/0xb6 [<c1255cc3>] ? netif_tx_lock+0x5d/0x5d [<c103c2cf>] ? run_timer_softirq+0x15d/0x198 [<c1037107>] ? __do_softirq+0x90/0x192 [<c1037077>] ? perf_trace_irq_handler_entry+0xd7/0xd7 <IRQ> [<c10372b7>] ? irq_exit+0x32/0x7d [<c1022fa9>] ? smp_apic_timer_interrupt+0x5b/0x65 [<c12e9228>] ? apic_timer_interrupt+0x34/0x3c [<c1028e7d>] ? native_safe_halt+0x2/0x3 [<f82d1221>] ? arch_safe_halt+0x5/0x7 [processor] [<f82d181f>] ? acpi_safe_halt+0x1e/0x2f [processor] [<f82d189e>] ? acpi_idle_enter_c1+0x4e/0x91 [processor] [<c122ebb6>] ? cpuidle_enter+0xb/0xe [<c122ef41>] ? cpuidle_enter_state+0x9/0x33 [<c122f016>] ? cpuidle_idle_call+0xab/0x146 [<c10114d7>] ? cpu_idle+0x88/0xac [<c1466970>] ? start_kernel+0x33e/0x343 ---[ end trace 8d4788fda9715e8a ]--- Kernel failure message 2: ------------[ cut here ]------------ WARNING: at /build/buildd-linux_3.7.8-1~experimental.1-i386-adxY04/linux-3.7.8/net/sched/sch_generic.c:255 dev_watchdog+0xae/0x111() Hardware name: Compaq Presario CQ61 NoteBook PC NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out Modules linked in: ipheth nls_utf8 isofs udf crc_itu_t cpufreq_powersave cpufreq_userspace cpufreq_stats cpufreq_conservative parport_pc ppdev lp parport bridge stp bnep rfcomm uinput binfmt_misc fuse appletalk ipx p8022 psnap llc p8023 rose netrom ax25 loop snd_hda_codec_hdmi joydev snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq acpi_cpufreq mperf snd_timer snd_seq_device kvm radeon arc4 snd ath9k mac80211 ath9k_common ath9k_hw ath ttm sp5100_tco tpm_tis tpm uvcvideo drm_kms_helper drm videobuf2_core videodev media videobuf2_vmalloc videobuf2_memops btusb i2c_algo_bit i2c_piix4 psmouse i2c_core cfg80211 bluetooth hp_wmi k10temp soundcore tpm_bios sparse_keymap snd_page_alloc evdev microcode pcspkr serio_raw video wmi shpchp battery ac button rfkill crc16 processor ext3 jbd mbcache sg sr_mod sd_mod cdrom crc_t10dif ohci_hcd ahci libahci thermal thermal_sys ehci_hcd libata r8169 mii scsi_mod usbcore usb_common Pid: 0, comm: swapper/0 Not tainted 3.7-trunk-686-pae #1 Debian 3.7.8-1~experimental.1 Call Trace: [<c10310a9>] ? warn_slowpath_common+0x68/0x79 [<c1255d71>] ? dev_watchdog+0xae/0x111 [<c1031122>] ? warn_slowpath_fmt+0x29/0x2d [<c1255d71>] ? dev_watchdog+0xae/0x111 [<c1255cc3>] ? netif_tx_lock+0x5d/0x5d [<c103b32a>] ? call_timer_fn+0x20/0xb6 [<c1255cc3>] ? netif_tx_lock+0x5d/0x5d [<c103c2cf>] ? run_timer_softirq+0x15d/0x198 [<c1037107>] ? __do_softirq+0x90/0x192 [<c1037077>] ? perf_trace_irq_handler_entry+0xd7/0xd7 <IRQ> [<c10372b7>] ? irq_exit+0x32/0x7d [<c1022fa9>] ? smp_apic_timer_interrupt+0x5b/0x65 [<c12e9228>] ? apic_timer_interrupt+0x34/0x3c [<c1028e7d>] ? native_safe_halt+0x2/0x3 [<f82d1221>] ? arch_safe_halt+0x5/0x7 [processor] [<f82d181f>] ? acpi_safe_halt+0x1e/0x2f [processor] [<f82d189e>] ? acpi_idle_enter_c1+0x4e/0x91 [processor] [<c122ebb6>] ? cpuidle_enter+0xb/0xe [<c122ef41>] ? cpuidle_enter_state+0x9/0x33 [<c122f016>] ? cpuidle_idle_call+0xab/0x146 [<c10114d7>] ? cpu_idle+0x88/0xac [<c1466970>] ? start_kernel+0x33e/0x343 ---[ end trace 8d4788fda9715e8a ]---
